[ARM] 4450/1: pxa: add pxa25x_init_irq() and pxa27x_init_irq()

/* should be ok this time, I aligned this patch to your arm:pxa2.mbox */

1. move pxa25x specific IRQ initialization code to pxa25x_init_irq()
and pxa27x code to pxa27x_init_irq(), remove pxa_init_irq()

2. replace all pxa_init_irq() with their PXA25x or PXA27x specific
functions
Signed-off-by: Neric miao <eric.miao@marvell.com>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

arch/arm/mach-pxa/corgi.c

@@ -368,7 +368,7 @@ MACHINE_START(CORGI, "SHARP Corgi")
 	.io_pg_offst	= (io_p2v(0x40000000) >> 18) & 0xfffc,
 	.fixup		= fixup_corgi,
 	.map_io		= pxa_map_io,
-	.init_irq	= pxa_init_irq,
+	.init_irq	= pxa25x_init_irq,
 	.init_machine	= corgi_init,
 	.timer		= &pxa_timer,
 MACHINE_END
@@ -380,7 +380,7 @@ MACHINE_START(SHEPHERD, "SHARP Shepherd")
 	.io_pg_offst	= (io_p2v(0x40000000) >> 18) & 0xfffc,
 	.fixup		= fixup_corgi,
 	.map_io		= pxa_map_io,
-	.init_irq	= pxa_init_irq,
+	.init_irq	= pxa25x_init_irq,
 	.init_machine	= corgi_init,
 	.timer		= &pxa_timer,
 MACHINE_END
@@ -392,7 +392,7 @@ MACHINE_START(HUSKY, "SHARP Husky")
 	.io_pg_offst	= (io_p2v(0x40000000) >> 18) & 0xfffc,
 	.fixup		= fixup_corgi,
 	.map_io		= pxa_map_io,
-	.init_irq	= pxa_init_irq,
+	.init_irq	= pxa25x_init_irq,
 	.init_machine	= corgi_init,
 	.timer		= &pxa_timer,
 MACHINE_END

arch/arm/mach-pxa/generic.h

@@ -12,8 +12,12 @@
 struct sys_timer;
 
 extern struct sys_timer pxa_timer;
+extern void __init pxa_init_irq_low(void);
+extern void __init pxa_init_irq_high(void);
+extern void __init pxa_init_irq_gpio(int gpio_nr);
+extern void __init pxa25x_init_irq(void);
+extern void __init pxa27x_init_irq(void);
 extern void __init pxa_map_io(void);
-extern void __init pxa_init_irq(void);
 
 extern unsigned int get_clk_frequency_khz(int info);
 

arch/arm/mach-pxa/idp.c

@@ -152,7 +152,7 @@ static void __init idp_init(void)
 static void __init idp_init_irq(void)
 {
 
-	pxa_init_irq();
+	pxa25x_init_irq();
 
 	set_irq_type(TOUCH_PANEL_IRQ, TOUCH_PANEL_IRQ_EDGE);
 }

arch/arm/mach-pxa/irq.c

@@ -375,12 +375,3 @@ void __init pxa_init_irq_gpio(int gpio_nr)
 	set_irq_chip(IRQ_GPIO_2_x, &pxa_internal_chip_low);
 	set_irq_chained_handler(IRQ_GPIO_2_x, pxa_gpio_demux_handler);
 }
-
-void __init pxa_init_irq(void)
-{
-	pxa_init_irq_low();
-#ifdef CONFIG_PXA27x
-	pxa_init_irq_high();
-#endif
-	pxa_init_irq_gpio(PXA_LAST_GPIO + 1);
-}

arch/arm/mach-pxa/lpd270.c

@@ -97,7 +97,7 @@ static void __init lpd270_init_irq(void)
 {
 	int irq;
 
-	pxa_init_irq();
+	pxa27x_init_irq();
 
 	__raw_writew(0, LPD270_INT_MASK);
 	__raw_writew(0, LPD270_INT_STATUS);

arch/arm/mach-pxa/lubbock.c

@@ -103,7 +103,7 @@ static void __init lubbock_init_irq(void)
 {
 	int irq;
 
-	pxa_init_irq();
+	pxa25x_init_irq();
 
 	/* setup extra lubbock irqs */
 	for (irq = LUBBOCK_IRQ(0); irq <= LUBBOCK_LAST_IRQ; irq++) {

arch/arm/mach-pxa/mainstone.c

@@ -89,7 +89,7 @@ static void __init mainstone_init_irq(void)
 {
 	int irq;
 
-	pxa_init_irq();
+	pxa27x_init_irq();
 
 	/* setup extra Mainstone irqs */
 	for(irq = MAINSTONE_IRQ(0); irq <= MAINSTONE_IRQ(15); irq++) {

arch/arm/mach-pxa/poodle.c

@@ -412,7 +412,7 @@ MACHINE_START(POODLE, "SHARP Poodle")
 	.io_pg_offst	= (io_p2v(0x40000000) >> 18) & 0xfffc,
 	.fixup		= fixup_poodle,
 	.map_io		= pxa_map_io,
-	.init_irq	= pxa_init_irq,
+	.init_irq	= pxa25x_init_irq,
 	.timer		= &pxa_timer,
 	.init_machine	= poodle_init,
 MACHINE_END

arch/arm/mach-pxa/pxa25x.c

@@ -22,6 +22,7 @@
 #include <linux/pm.h>
 
 #include <asm/hardware.h>
+#include <asm/arch/irqs.h>
 #include <asm/arch/pxa-regs.h>
 #include <asm/arch/pm.h>
 
@@ -128,6 +129,12 @@ static struct pm_ops pxa25x_pm_ops = {
 };
 #endif
 
+void __init pxa25x_init_irq(void)
+{
+	pxa_init_irq_low();
+	pxa_init_irq_gpio(85);
+}
+
 static int __init pxa25x_init(void)
 {
 	if (cpu_is_pxa21x() || cpu_is_pxa25x()) {

arch/arm/mach-pxa/pxa27x.c

@@ -19,6 +19,7 @@
 
 #include <asm/hardware.h>
 #include <asm/irq.h>
+#include <asm/arch/irqs.h>
 #include <asm/arch/pxa-regs.h>
 #include <asm/arch/ohci.h>
 #include <asm/arch/pm.h>
@@ -202,6 +203,13 @@ static struct platform_device *devices[] __initdata = {
 	&ohci_device,
 };
 
+void __init pxa27x_init_irq(void)
+{
+	pxa_init_irq_low();
+	pxa_init_irq_high();
+	pxa_init_irq_gpio(128);
+}
+
 static int __init pxa27x_init(void)
 {
 	int ret = 0;

arch/arm/mach-pxa/spitz.c

@@ -560,7 +560,7 @@ MACHINE_START(SPITZ, "SHARP Spitz")
 	.io_pg_offst	= (io_p2v(0x40000000) >> 18) & 0xfffc,
 	.fixup		= fixup_spitz,
 	.map_io		= pxa_map_io,
-	.init_irq	= pxa_init_irq,
+	.init_irq	= pxa27x_init_irq,
 	.init_machine	= spitz_init,
 	.timer		= &pxa_timer,
 MACHINE_END
@@ -572,7 +572,7 @@ MACHINE_START(BORZOI, "SHARP Borzoi")
 	.io_pg_offst	= (io_p2v(0x40000000) >> 18) & 0xfffc,
 	.fixup		= fixup_spitz,
 	.map_io		= pxa_map_io,
-	.init_irq	= pxa_init_irq,
+	.init_irq	= pxa27x_init_irq,
 	.init_machine	= spitz_init,
 	.timer		= &pxa_timer,
 MACHINE_END
@@ -584,7 +584,7 @@ MACHINE_START(AKITA, "SHARP Akita")
 	.io_pg_offst	= (io_p2v(0x40000000) >> 18) & 0xfffc,
 	.fixup		= fixup_spitz,
 	.map_io		= pxa_map_io,
-	.init_irq	= pxa_init_irq,
+	.init_irq	= pxa27x_init_irq,
 	.init_machine	= akita_init,
 	.timer		= &pxa_timer,
 MACHINE_END

arch/arm/mach-pxa/tosa.c

@@ -332,7 +332,7 @@ MACHINE_START(TOSA, "SHARP Tosa")
 	.io_pg_offst	= (io_p2v(0x40000000) >> 18) & 0xfffc,
 	.fixup          = fixup_tosa,
 	.map_io         = pxa_map_io,
-	.init_irq       = pxa_init_irq,
+	.init_irq       = pxa25x_init_irq,
 	.init_machine   = tosa_init,
 	.timer          = &pxa_timer,
 MACHINE_END

arch/arm/mach-pxa/trizeps4.c

@@ -503,7 +503,7 @@ MACHINE_START(TRIZEPS4, "Keith und Koep Trizeps IV module")
 	.boot_params	= TRIZEPS4_SDRAM_BASE + 0x100,
 	.init_machine	= trizeps4_init,
 	.map_io		= trizeps4_map_io,
-	.init_irq	= pxa_init_irq,
+	.init_irq	= pxa27x_init_irq,
 	.timer		= &pxa_timer,
 MACHINE_END