[media] ddbridge: Initial check-in

Driver support for Digital Devices ddbridge-based cards:
Octopus, Octopus mini, Octopus LE, cineS2(v6)
with DuoFlex S2 and/or DuoFlex CT tuners.

Driver was taken from ddbridge-0.6.1.tar.bz2.
Signed-off-by: NRalph Metzler <rmetzler@digitaldevices.de>
Signed-off-by: NOliver Endriss <o.endriss@gmx.de>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

drivers/media/dvb/ddbridge/ddbridge-regs.h

+/*
+ * ddbridge-regs.h: Digital Devices PCIe bridge driver
+ *
+ * Copyright (C) 2010-2011 Digital Devices GmbH
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 only, as published by the Free Software Foundation.
+ *
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA
+ * Or, point your browser to http://www.gnu.org/copyleft/gpl.html
+ */
+
+// $Id: DD-DVBBridgeV1.h 273 2010-09-17 05:03:16Z manfred $
+
+// Register Definitions
+
+#define CUR_REGISTERMAP_VERSION 0x10000
+
+#define HARDWARE_VERSION       0x00
+#define REGISTERMAP_VERSION    0x04
+
+// --------------------------------------------------------------------------
+// SPI Controller
+
+#define SPI_CONTROL     0x10
+#define SPI_DATA        0x14
+
+// --------------------------------------------------------------------------
+
+// Interrupt controller
+// How many MSI's are available depends on HW (Min 2 max 8)
+// How many are usable also depends on Host platform
+
+#define INTERRUPT_BASE   (0x40)
+
+#define INTERRUPT_ENABLE (INTERRUPT_BASE + 0x00)
+#define MSI0_ENABLE      (INTERRUPT_BASE + 0x00)
+#define MSI1_ENABLE      (INTERRUPT_BASE + 0x04)
+#define MSI2_ENABLE      (INTERRUPT_BASE + 0x08)
+#define MSI3_ENABLE      (INTERRUPT_BASE + 0x0C)
+#define MSI4_ENABLE      (INTERRUPT_BASE + 0x10)
+#define MSI5_ENABLE      (INTERRUPT_BASE + 0x14)
+#define MSI6_ENABLE      (INTERRUPT_BASE + 0x18)
+#define MSI7_ENABLE      (INTERRUPT_BASE + 0x1C)
+
+#define INTERRUPT_STATUS (INTERRUPT_BASE + 0x20)
+#define INTERRUPT_ACK    (INTERRUPT_BASE + 0x20)
+
+#define INTMASK_I2C1        (0x00000001)
+#define INTMASK_I2C2        (0x00000002)
+#define INTMASK_I2C3        (0x00000004)
+#define INTMASK_I2C4        (0x00000008)
+
+#define INTMASK_CIRQ1       (0x00000010)
+#define INTMASK_CIRQ2       (0x00000020)
+#define INTMASK_CIRQ3       (0x00000040)
+#define INTMASK_CIRQ4       (0x00000080)
+
+#define INTMASK_TSINPUT1    (0x00000100)
+#define INTMASK_TSINPUT2    (0x00000200)
+#define INTMASK_TSINPUT3    (0x00000400)
+#define INTMASK_TSINPUT4    (0x00000800)
+#define INTMASK_TSINPUT5    (0x00001000)
+#define INTMASK_TSINPUT6    (0x00002000)
+#define INTMASK_TSINPUT7    (0x00004000)
+#define INTMASK_TSINPUT8    (0x00008000)
+
+#define INTMASK_TSOUTPUT1   (0x00010000)
+#define INTMASK_TSOUTPUT2   (0x00020000)
+#define INTMASK_TSOUTPUT3   (0x00040000)
+#define INTMASK_TSOUTPUT4   (0x00080000)
+
+// --------------------------------------------------------------------------
+// I2C Master Controller
+
+#define I2C_BASE        (0x80)  // Byte offset
+
+#define I2C_COMMAND     (0x00)
+#define I2C_TIMING      (0x04)
+#define I2C_TASKLENGTH  (0x08)     // High read, low write
+#define I2C_TASKADDRESS (0x0C)     // High read, low write
+
+#define I2C_MONITOR     (0x1C)
+
+#define I2C_BASE_1      (I2C_BASE + 0x00)
+#define I2C_BASE_2      (I2C_BASE + 0x20)
+#define I2C_BASE_3      (I2C_BASE + 0x40)
+#define I2C_BASE_4      (I2C_BASE + 0x60)
+
+#define I2C_BASE_N(i)   (I2C_BASE + (i) * 0x20)
+
+#define I2C_TASKMEM_BASE    (0x1000)    // Byte offset
+#define I2C_TASKMEM_SIZE    (0x1000)
+
+#define I2C_SPEED_400   (0x04030404)
+#define I2C_SPEED_200   (0x09080909)
+#define I2C_SPEED_154   (0x0C0B0C0C)
+#define I2C_SPEED_100   (0x13121313)
+#define I2C_SPEED_77    (0x19181919)
+#define I2C_SPEED_50    (0x27262727)
+
+
+// --------------------------------------------------------------------------
+// DMA  Controller
+
+#define DMA_BASE_WRITE        (0x100)
+#define DMA_BASE_READ         (0x140)
+
+#define DMA_CONTROL     (0x00)                  // 64
+#define DMA_ERROR       (0x04)                  // 65 ( only read instance )
+
+#define DMA_DIAG_CONTROL                (0x1C)  // 71
+#define DMA_DIAG_PACKETCOUNTER_LOW      (0x20)  // 72
+#define DMA_DIAG_PACKETCOUNTER_HIGH     (0x24)  // 73
+#define DMA_DIAG_TIMECOUNTER_LOW        (0x28)  // 74
+#define DMA_DIAG_TIMECOUNTER_HIGH       (0x2C)  // 75
+#define DMA_DIAG_RECHECKCOUNTER         (0x30)  // 76  ( Split completions on read )
+#define DMA_DIAG_WAITTIMEOUTINIT        (0x34)  // 77
+#define DMA_DIAG_WAITOVERFLOWCOUNTER    (0x38)  // 78
+#define DMA_DIAG_WAITCOUNTER            (0x3C)  // 79
+
+// --------------------------------------------------------------------------
+// DMA  Buffer
+
+#define TS_INPUT_BASE       (0x200)
+#define TS_INPUT_CONTROL(i)         (TS_INPUT_BASE + (i) * 16 + 0x00)
+
+#define TS_OUTPUT_BASE       (0x280)
+#define TS_OUTPUT_CONTROL(i)         (TS_OUTPUT_BASE + (i) * 16 + 0x00)
+
+#define DMA_BUFFER_BASE     (0x300)
+
+#define DMA_BUFFER_CONTROL(i)       (DMA_BUFFER_BASE + (i) * 16 + 0x00)
+#define DMA_BUFFER_ACK(i)           (DMA_BUFFER_BASE + (i) * 16 + 0x04)
+#define DMA_BUFFER_CURRENT(i)       (DMA_BUFFER_BASE + (i) * 16 + 0x08)
+#define DMA_BUFFER_SIZE(i)          (DMA_BUFFER_BASE + (i) * 16 + 0x0c)
+
+#define DMA_BASE_ADDRESS_TABLE  (0x2000)
+#define DMA_BASE_ADDRESS_TABLE_ENTRIES (512)
+

drivers/media/dvb/ddbridge/ddbridge.h

+/*
+ * ddbridge.h: Digital Devices PCIe bridge driver
+ *
+ * Copyright (C) 2010-2011 Digital Devices GmbH
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 only, as published by the Free Software Foundation.
+ *
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA
+ * Or, point your browser to http://www.gnu.org/copyleft/gpl.html
+ */
+
+#ifndef _DDBRIDGE_H_
+#define _DDBRIDGE_H_
+
+#include <linux/types.h>
+#include <linux/sched.h>
+#include <linux/interrupt.h>
+#include <linux/i2c.h>
+#include <linux/mutex.h>
+#include <asm/dma.h>
+#include <linux/dvb/frontend.h>
+#include <linux/dvb/ca.h>
+#include <linux/dvb/video.h>
+#include <linux/dvb/audio.h>
+#include <linux/socket.h>
+
+#include "dmxdev.h"
+#include "dvbdev.h"
+#include "dvb_demux.h"
+#include "dvb_frontend.h"
+#include "dvb_ringbuffer.h"
+#include "dvb_ca_en50221.h"
+#include "dvb_net.h"
+#include "cxd2099.h"
+
+#define DDB_MAX_I2C     4
+#define DDB_MAX_PORT    4
+#define DDB_MAX_INPUT   8
+#define DDB_MAX_OUTPUT  4
+
+struct ddb_info {
+	int   type;
+#define DDB_NONE         0
+#define DDB_OCTOPUS      1
+	char *name;
+	int   port_num;
+	u32   port_type[DDB_MAX_PORT];
+};
+
+/* DMA_SIZE MUST be divisible by 188 and 128 !!! */
+
+#define INPUT_DMA_MAX_BUFS 32      /* hardware table limit */
+#define INPUT_DMA_BUFS 8
+#define INPUT_DMA_SIZE (128*47*21)
+
+#define OUTPUT_DMA_MAX_BUFS 32
+#define OUTPUT_DMA_BUFS 8
+#define OUTPUT_DMA_SIZE (128*47*21)
+
+struct ddb;
+struct ddb_port;
+
+struct ddb_input {
+	struct ddb_port       *port;
+	u32                    nr;
+	int                    attached;
+
+	dma_addr_t             pbuf[INPUT_DMA_MAX_BUFS];
+	u8                    *vbuf[INPUT_DMA_MAX_BUFS];
+	u32                    dma_buf_num;
+	u32                    dma_buf_size;
+
+	struct tasklet_struct  tasklet;
+	spinlock_t             lock;
+	wait_queue_head_t      wq;
+	int                    running;
+	u32                    stat;
+	u32                    cbuf;
+	u32                    coff;
+
+	struct dvb_adapter     adap;
+	struct dvb_device     *dev;
+	struct dvb_frontend   *fe;
+	struct dvb_frontend   *fe2;
+	struct dmxdev          dmxdev;
+	struct dvb_demux       demux;
+	struct dvb_net         dvbnet;
+	struct dmx_frontend    hw_frontend;
+	struct dmx_frontend    mem_frontend;
+	int                    users;
+	int (*gate_ctrl)(struct dvb_frontend *, int);
+};
+
+struct ddb_output {
+	struct ddb_port       *port;
+	u32                    nr;
+	dma_addr_t             pbuf[OUTPUT_DMA_MAX_BUFS];
+	u8                    *vbuf[OUTPUT_DMA_MAX_BUFS];
+	u32                    dma_buf_num;
+	u32                    dma_buf_size;
+	struct tasklet_struct  tasklet;
+	spinlock_t             lock;
+	wait_queue_head_t      wq;
+	int                    running;
+	u32                    stat;
+	u32                    cbuf;
+	u32                    coff;
+
+	struct dvb_adapter     adap;
+	struct dvb_device     *dev;
+};
+
+struct ddb_i2c {
+	struct ddb            *dev;
+	u32                    nr;
+	struct i2c_adapter     adap;
+	struct i2c_adapter     adap2;
+	u32                    regs;
+	u32                    rbuf;
+	u32                    wbuf;
+	int                    done;
+	wait_queue_head_t      wq;
+};
+
+struct ddb_port {
+	struct ddb            *dev;
+	u32                    nr;
+	struct ddb_i2c        *i2c;
+	struct mutex           i2c_gate_lock;
+	u32                    class;
+#define DDB_PORT_NONE           0
+#define DDB_PORT_CI             1
+#define DDB_PORT_TUNER          2
+	u32                    type;
+#define DDB_TUNER_NONE          0
+#define DDB_TUNER_DVBS_ST       1
+#define DDB_TUNER_DVBS_ST_AA    2
+#define DDB_TUNER_DVBCT_TR     16
+#define DDB_TUNER_DVBCT_ST     17
+	u32                    adr;
+
+	struct ddb_input      *input[2];
+	struct ddb_output     *output;
+	struct dvb_ca_en50221 *en;
+};
+
+struct ddb {
+	struct pci_dev        *pdev;
+	unsigned char         *regs;
+	struct ddb_port        port[DDB_MAX_PORT];
+	struct ddb_i2c         i2c[DDB_MAX_I2C];
+	struct ddb_input       input[DDB_MAX_INPUT];
+	struct ddb_output      output[DDB_MAX_OUTPUT];
+
+	struct device         *ddb_dev;
+	int                    nr;
+	u8                     iobuf[1028];
+
+	struct ddb_info       *info;
+	int                    msi;
+};
+
+/****************************************************************************/
+
+#define ddbwritel(_val, _adr)        writel((_val), \
+				     (char *) (dev->regs+(_adr)))
+#define ddbreadl(_adr)               readl((char *) (dev->regs+(_adr)))
+#define ddbcpyto(_adr,_src,_count)   memcpy_toio((char *)	\
+				     (dev->regs+(_adr)),(_src),(_count))
+#define ddbcpyfrom(_dst,_adr,_count) memcpy_fromio((_dst),(char *) \
+				     (dev->regs+(_adr)),(_count))
+
+/****************************************************************************/
+
+#endif