提交 cc9fd71c 编写于 作者: B Benjamin Herrenschmidt 提交者: Paul Mackerras

[POWERPC] New device-tree interrupt parsing code

Adds new routines to prom_parse to walk the device-tree for interrupt
information. This includes both direct mapping of interrupts and low
level parsing functions for use with partial trees.
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: NPaul Mackerras <paulus@samba.org>
上级 b9e5b4e6
......@@ -38,14 +38,6 @@ static void of_dump_addr(const char *s, u32 *addr, int na)
static void of_dump_addr(const char *s, u32 *addr, int na) { }
#endif
/* Read a big address */
static inline u64 of_read_addr(u32 *cell, int size)
{
u64 r = 0;
while (size--)
r = (r << 32) | *(cell++);
return r;
}
/* Callbacks for bus specific translators */
struct of_bus {
......@@ -77,9 +69,9 @@ static u64 of_bus_default_map(u32 *addr, u32 *range, int na, int ns, int pna)
{
u64 cp, s, da;
cp = of_read_addr(range, na);
s = of_read_addr(range + na + pna, ns);
da = of_read_addr(addr, na);
cp = of_read_number(range, na);
s = of_read_number(range + na + pna, ns);
da = of_read_number(addr, na);
DBG("OF: default map, cp="PRu64", s="PRu64", da="PRu64"\n",
cp, s, da);
......@@ -91,7 +83,7 @@ static u64 of_bus_default_map(u32 *addr, u32 *range, int na, int ns, int pna)
static int of_bus_default_translate(u32 *addr, u64 offset, int na)
{
u64 a = of_read_addr(addr, na);
u64 a = of_read_number(addr, na);
memset(addr, 0, na * 4);
a += offset;
if (na > 1)
......@@ -135,9 +127,9 @@ static u64 of_bus_pci_map(u32 *addr, u32 *range, int na, int ns, int pna)
return OF_BAD_ADDR;
/* Read address values, skipping high cell */
cp = of_read_addr(range + 1, na - 1);
s = of_read_addr(range + na + pna, ns);
da = of_read_addr(addr + 1, na - 1);
cp = of_read_number(range + 1, na - 1);
s = of_read_number(range + na + pna, ns);
da = of_read_number(addr + 1, na - 1);
DBG("OF: PCI map, cp="PRu64", s="PRu64", da="PRu64"\n", cp, s, da);
......@@ -195,9 +187,9 @@ static u64 of_bus_isa_map(u32 *addr, u32 *range, int na, int ns, int pna)
return OF_BAD_ADDR;
/* Read address values, skipping high cell */
cp = of_read_addr(range + 1, na - 1);
s = of_read_addr(range + na + pna, ns);
da = of_read_addr(addr + 1, na - 1);
cp = of_read_number(range + 1, na - 1);
s = of_read_number(range + na + pna, ns);
da = of_read_number(addr + 1, na - 1);
DBG("OF: ISA map, cp="PRu64", s="PRu64", da="PRu64"\n", cp, s, da);
......@@ -295,7 +287,7 @@ static int of_translate_one(struct device_node *parent, struct of_bus *bus,
*/
ranges = (u32 *)get_property(parent, "ranges", &rlen);
if (ranges == NULL || rlen == 0) {
offset = of_read_addr(addr, na);
offset = of_read_number(addr, na);
memset(addr, 0, pna * 4);
DBG("OF: no ranges, 1:1 translation\n");
goto finish;
......@@ -378,7 +370,7 @@ u64 of_translate_address(struct device_node *dev, u32 *in_addr)
/* If root, we have finished */
if (parent == NULL) {
DBG("OF: reached root node\n");
result = of_read_addr(addr, na);
result = of_read_number(addr, na);
break;
}
......@@ -442,7 +434,7 @@ u32 *of_get_address(struct device_node *dev, int index, u64 *size,
for (i = 0; psize >= onesize; psize -= onesize, prop += onesize, i++)
if (i == index) {
if (size)
*size = of_read_addr(prop + na, ns);
*size = of_read_number(prop + na, ns);
if (flags)
*flags = bus->get_flags(prop);
return prop;
......@@ -484,7 +476,7 @@ u32 *of_get_pci_address(struct device_node *dev, int bar_no, u64 *size,
for (i = 0; psize >= onesize; psize -= onesize, prop += onesize, i++)
if ((prop[0] & 0xff) == ((bar_no * 4) + PCI_BASE_ADDRESS_0)) {
if (size)
*size = of_read_addr(prop + na, ns);
*size = of_read_number(prop + na, ns);
if (flags)
*flags = bus->get_flags(prop);
return prop;
......@@ -565,11 +557,414 @@ void of_parse_dma_window(struct device_node *dn, unsigned char *dma_window_prop,
prop = get_property(dn, "#address-cells", NULL);
cells = prop ? *(u32 *)prop : prom_n_addr_cells(dn);
*phys = of_read_addr(dma_window, cells);
*phys = of_read_number(dma_window, cells);
dma_window += cells;
prop = get_property(dn, "ibm,#dma-size-cells", NULL);
cells = prop ? *(u32 *)prop : prom_n_size_cells(dn);
*size = of_read_addr(dma_window, cells);
*size = of_read_number(dma_window, cells);
}
/*
* Interrupt remapper
*/
static unsigned int of_irq_workarounds;
static struct device_node *of_irq_dflt_pic;
static struct device_node *of_irq_find_parent(struct device_node *child)
{
struct device_node *p;
phandle *parp;
if (!of_node_get(child))
return NULL;
do {
parp = (phandle *)get_property(child, "interrupt-parent", NULL);
if (parp == NULL)
p = of_get_parent(child);
else {
if (of_irq_workarounds & OF_IMAP_NO_PHANDLE)
p = of_node_get(of_irq_dflt_pic);
else
p = of_find_node_by_phandle(*parp);
}
of_node_put(child);
child = p;
} while (p && get_property(p, "#interrupt-cells", NULL) == NULL);
return p;
}
static u8 of_irq_pci_swizzle(u8 slot, u8 pin)
{
return (((pin - 1) + slot) % 4) + 1;
}
/* This doesn't need to be called if you don't have any special workaround
* flags to pass
*/
void of_irq_map_init(unsigned int flags)
{
of_irq_workarounds = flags;
/* OldWorld, don't bother looking at other things */
if (flags & OF_IMAP_OLDWORLD_MAC)
return;
/* If we don't have phandles, let's try to locate a default interrupt
* controller (happens when booting with BootX). We do a first match
* here, hopefully, that only ever happens on machines with one
* controller.
*/
if (flags & OF_IMAP_NO_PHANDLE) {
struct device_node *np;
for(np = NULL; (np = of_find_all_nodes(np)) != NULL;) {
if (get_property(np, "interrupt-controller", NULL)
== NULL)
continue;
/* Skip /chosen/interrupt-controller */
if (strcmp(np->name, "chosen") == 0)
continue;
/* It seems like at least one person on this planet wants
* to use BootX on a machine with an AppleKiwi controller
* which happens to pretend to be an interrupt
* controller too.
*/
if (strcmp(np->name, "AppleKiwi") == 0)
continue;
/* I think we found one ! */
of_irq_dflt_pic = np;
break;
}
}
}
int of_irq_map_raw(struct device_node *parent, u32 *intspec, u32 *addr,
struct of_irq *out_irq)
{
struct device_node *ipar, *tnode, *old = NULL, *newpar = NULL;
u32 *tmp, *imap, *imask;
u32 intsize = 1, addrsize, newintsize = 0, newaddrsize = 0;
int imaplen, match, i;
ipar = of_node_get(parent);
/* First get the #interrupt-cells property of the current cursor
* that tells us how to interpret the passed-in intspec. If there
* is none, we are nice and just walk up the tree
*/
do {
tmp = (u32 *)get_property(ipar, "#interrupt-cells", NULL);
if (tmp != NULL) {
intsize = *tmp;
break;
}
tnode = ipar;
ipar = of_irq_find_parent(ipar);
of_node_put(tnode);
} while (ipar);
if (ipar == NULL) {
DBG(" -> no parent found !\n");
goto fail;
}
DBG("of_irq_map_raw: ipar=%s, size=%d\n", ipar->full_name, intsize);
/* Look for this #address-cells. We have to implement the old linux
* trick of looking for the parent here as some device-trees rely on it
*/
old = of_node_get(ipar);
do {
tmp = (u32 *)get_property(old, "#address-cells", NULL);
tnode = of_get_parent(old);
of_node_put(old);
old = tnode;
} while(old && tmp == NULL);
of_node_put(old);
old = NULL;
addrsize = (tmp == NULL) ? 2 : *tmp;
DBG(" -> addrsize=%d\n", addrsize);
/* Now start the actual "proper" walk of the interrupt tree */
while (ipar != NULL) {
/* Now check if cursor is an interrupt-controller and if it is
* then we are done
*/
if (get_property(ipar, "interrupt-controller", NULL) != NULL) {
DBG(" -> got it !\n");
memcpy(out_irq->specifier, intspec,
intsize * sizeof(u32));
out_irq->size = intsize;
out_irq->controller = ipar;
of_node_put(old);
return 0;
}
/* Now look for an interrupt-map */
imap = (u32 *)get_property(ipar, "interrupt-map", &imaplen);
/* No interrupt map, check for an interrupt parent */
if (imap == NULL) {
DBG(" -> no map, getting parent\n");
newpar = of_irq_find_parent(ipar);
goto skiplevel;
}
imaplen /= sizeof(u32);
/* Look for a mask */
imask = (u32 *)get_property(ipar, "interrupt-map-mask", NULL);
/* If we were passed no "reg" property and we attempt to parse
* an interrupt-map, then #address-cells must be 0.
* Fail if it's not.
*/
if (addr == NULL && addrsize != 0) {
DBG(" -> no reg passed in when needed !\n");
goto fail;
}
/* Parse interrupt-map */
match = 0;
while (imaplen > (addrsize + intsize + 1) && !match) {
/* Compare specifiers */
match = 1;
for (i = 0; i < addrsize && match; ++i) {
u32 mask = imask ? imask[i] : 0xffffffffu;
match = ((addr[i] ^ imap[i]) & mask) == 0;
}
for (; i < (addrsize + intsize) && match; ++i) {
u32 mask = imask ? imask[i] : 0xffffffffu;
match =
((intspec[i-addrsize] ^ imap[i]) & mask) == 0;
}
imap += addrsize + intsize;
imaplen -= addrsize + intsize;
DBG(" -> match=%d (imaplen=%d)\n", match, imaplen);
/* Get the interrupt parent */
if (of_irq_workarounds & OF_IMAP_NO_PHANDLE)
newpar = of_node_get(of_irq_dflt_pic);
else
newpar = of_find_node_by_phandle((phandle)*imap);
imap++;
--imaplen;
/* Check if not found */
if (newpar == NULL) {
DBG(" -> imap parent not found !\n");
goto fail;
}
/* Get #interrupt-cells and #address-cells of new
* parent
*/
tmp = (u32 *)get_property(newpar, "#interrupt-cells",
NULL);
if (tmp == NULL) {
DBG(" -> parent lacks #interrupt-cells !\n");
goto fail;
}
newintsize = *tmp;
tmp = (u32 *)get_property(newpar, "#address-cells",
NULL);
newaddrsize = (tmp == NULL) ? 0 : *tmp;
DBG(" -> newintsize=%d, newaddrsize=%d\n",
newintsize, newaddrsize);
/* Check for malformed properties */
if (imaplen < (newaddrsize + newintsize))
goto fail;
imap += newaddrsize + newintsize;
imaplen -= newaddrsize + newintsize;
DBG(" -> imaplen=%d\n", imaplen);
}
if (!match)
goto fail;
of_node_put(old);
old = of_node_get(newpar);
addrsize = newaddrsize;
intsize = newintsize;
intspec = imap - intsize;
addr = intspec - addrsize;
skiplevel:
/* Iterate again with new parent */
DBG(" -> new parent: %s\n", newpar ? newpar->full_name : "<>");
of_node_put(ipar);
ipar = newpar;
newpar = NULL;
}
fail:
of_node_put(ipar);
of_node_put(old);
of_node_put(newpar);
return -EINVAL;
}
EXPORT_SYMBOL_GPL(of_irq_map_raw);
#if defined(CONFIG_PPC_PMAC) && defined(CONFIG_PPC32)
static int of_irq_map_oldworld(struct device_node *device, int index,
struct of_irq *out_irq)
{
u32 *ints;
int intlen;
/*
* Old machines just have a list of interrupt numbers
* and no interrupt-controller nodes.
*/
ints = (u32 *) get_property(device, "AAPL,interrupts", &intlen);
if (ints == NULL)
return -EINVAL;
intlen /= sizeof(u32);
if (index >= intlen)
return -EINVAL;
out_irq->controller = NULL;
out_irq->specifier[0] = ints[index];
out_irq->size = 1;
return 0;
}
#else /* defined(CONFIG_PPC_PMAC) && defined(CONFIG_PPC32) */
static int of_irq_map_oldworld(struct device_node *device, int index,
struct of_irq *out_irq)
{
return -EINVAL;
}
#endif /* !(defined(CONFIG_PPC_PMAC) && defined(CONFIG_PPC32)) */
int of_irq_map_one(struct device_node *device, int index, struct of_irq *out_irq)
{
struct device_node *p;
u32 *intspec, *tmp, intsize, intlen, *addr;
int res;
DBG("of_irq_map_one: dev=%s, index=%d\n", device->full_name, index);
/* OldWorld mac stuff is "special", handle out of line */
if (of_irq_workarounds & OF_IMAP_OLDWORLD_MAC)
return of_irq_map_oldworld(device, index, out_irq);
/* Get the interrupts property */
intspec = (u32 *)get_property(device, "interrupts", &intlen);
if (intspec == NULL)
return -EINVAL;
intlen /= sizeof(u32);
/* Get the reg property (if any) */
addr = (u32 *)get_property(device, "reg", NULL);
/* Look for the interrupt parent. */
p = of_irq_find_parent(device);
if (p == NULL)
return -EINVAL;
/* Get size of interrupt specifier */
tmp = (u32 *)get_property(p, "#interrupt-cells", NULL);
if (tmp == NULL) {
of_node_put(p);
return -EINVAL;
}
intsize = *tmp;
/* Check index */
if (index * intsize >= intlen)
return -EINVAL;
/* Get new specifier and map it */
res = of_irq_map_raw(p, intspec + index * intsize, addr, out_irq);
of_node_put(p);
return res;
}
EXPORT_SYMBOL_GPL(of_irq_map_one);
int of_irq_map_pci(struct pci_dev *pdev, struct of_irq *out_irq)
{
struct device_node *dn, *ppnode;
struct pci_dev *ppdev;
u32 lspec;
u32 laddr[3];
u8 pin;
int rc;
/* Check if we have a device node, if yes, fallback to standard OF
* parsing
*/
dn = pci_device_to_OF_node(pdev);
if (dn)
return of_irq_map_one(dn, 0, out_irq);
/* Ok, we don't, time to have fun. Let's start by building up an
* interrupt spec. we assume #interrupt-cells is 1, which is standard
* for PCI. If you do different, then don't use that routine.
*/
rc = pci_read_config_byte(pdev, PCI_INTERRUPT_PIN, &pin);
if (rc != 0)
return rc;
/* No pin, exit */
if (pin == 0)
return -ENODEV;
/* Now we walk up the PCI tree */
lspec = pin;
for (;;) {
/* Get the pci_dev of our parent */
ppdev = pdev->bus->self;
/* Ouch, it's a host bridge... */
if (ppdev == NULL) {
#ifdef CONFIG_PPC64
ppnode = pci_bus_to_OF_node(pdev->bus);
#else
struct pci_controller *host;
host = pci_bus_to_host(pdev->bus);
ppnode = host ? host->arch_data : NULL;
#endif
/* No node for host bridge ? give up */
if (ppnode == NULL)
return -EINVAL;
} else
/* We found a P2P bridge, check if it has a node */
ppnode = pci_device_to_OF_node(ppdev);
/* Ok, we have found a parent with a device-node, hand over to
* the OF parsing code.
* We build a unit address from the linux device to be used for
* resolution. Note that we use the linux bus number which may
* not match your firmware bus numbering.
* Fortunately, in most cases, interrupt-map-mask doesn't include
* the bus number as part of the matching.
* You should still be careful about that though if you intend
* to rely on this function (you ship a firmware that doesn't
* create device nodes for all PCI devices).
*/
if (ppnode)
break;
/* We can only get here if we hit a P2P bridge with no node,
* let's do standard swizzling and try again
*/
lspec = of_irq_pci_swizzle(PCI_SLOT(pdev->devfn), lspec);
pdev = ppdev;
}
laddr[0] = (pdev->bus->number << 16)
| (pdev->devfn << 8);
laddr[1] = laddr[2] = 0;
return of_irq_map_raw(ppnode, &lspec, laddr, out_irq);
}
EXPORT_SYMBOL_GPL(of_irq_map_pci);
......@@ -204,6 +204,15 @@ extern int release_OF_resource(struct device_node* node, int index);
*/
/* Helper to read a big number */
static inline u64 of_read_number(u32 *cell, int size)
{
u64 r = 0;
while (size--)
r = (r << 32) | *(cell++);
return r;
}
/* Translate an OF address block into a CPU physical address
*/
#define OF_BAD_ADDR ((u64)-1)
......@@ -240,5 +249,83 @@ extern void kdump_move_device_tree(void);
/* CPU OF node matching */
struct device_node *of_get_cpu_node(int cpu, unsigned int *thread);
/*
* OF interrupt mapping
*/
/* This structure is returned when an interrupt is mapped. The controller
* field needs to be put() after use
*/
#define OF_MAX_IRQ_SPEC 4 /* We handle specifiers of at most 4 cells */
struct of_irq {
struct device_node *controller; /* Interrupt controller node */
u32 size; /* Specifier size */
u32 specifier[OF_MAX_IRQ_SPEC]; /* Specifier copy */
};
/***
* of_irq_map_init - Initialize the irq remapper
* @flags: flags defining workarounds to enable
*
* Some machines have bugs in the device-tree which require certain workarounds
* to be applied. Call this before any interrupt mapping attempts to enable
* those workarounds.
*/
#define OF_IMAP_OLDWORLD_MAC 0x00000001
#define OF_IMAP_NO_PHANDLE 0x00000002
extern void of_irq_map_init(unsigned int flags);
/***
* of_irq_map_raw - Low level interrupt tree parsing
* @parent: the device interrupt parent
* @intspec: interrupt specifier ("interrupts" property of the device)
* @addr: address specifier (start of "reg" property of the device)
* @out_irq: structure of_irq filled by this function
*
* Returns 0 on success and a negative number on error
*
* This function is a low-level interrupt tree walking function. It
* can be used to do a partial walk with synthetized reg and interrupts
* properties, for example when resolving PCI interrupts when no device
* node exist for the parent.
*
*/
extern int of_irq_map_raw(struct device_node *parent, u32 *intspec, u32 *addr,
struct of_irq *out_irq);
/***
* of_irq_map_one - Resolve an interrupt for a device
* @device: the device whose interrupt is to be resolved
* @index: index of the interrupt to resolve
* @out_irq: structure of_irq filled by this function
*
* This function resolves an interrupt, walking the tree, for a given
* device-tree node. It's the high level pendant to of_irq_map_raw().
* It also implements the workarounds for OldWolrd Macs.
*/
extern int of_irq_map_one(struct device_node *device, int index,
struct of_irq *out_irq);
/***
* of_irq_map_pci - Resolve the interrupt for a PCI device
* @pdev: the device whose interrupt is to be resolved
* @out_irq: structure of_irq filled by this function
*
* This function resolves the PCI interrupt for a given PCI device. If a
* device-node exists for a given pci_dev, it will use normal OF tree
* walking. If not, it will implement standard swizzling and walk up the
* PCI tree until an device-node is found, at which point it will finish
* resolving using the OF tree walking.
*/
struct pci_dev;
extern int of_irq_map_pci(struct pci_dev *pdev, struct of_irq *out_irq);
#endif /* __KERNEL__ */
#endif /* _POWERPC_PROM_H */
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册