提交 cc76dee1 编写于 作者: G Guenter Roeck

hwmon: (nct6775) NCT6791 supports weight control only for CPUFAN

Unlike other chips supported by this driver, the NCT6791 only has a single
set of registers to configure weighted fan control. Enable it only for the
single channel supporting it.
Signed-off-by: NGuenter Roeck <linux@roeck-us.net>
上级 d1a284b7
......@@ -510,6 +510,13 @@ static const u16 NCT6779_REG_TEMP_CRIT[ARRAY_SIZE(nct6779_temp_label) - 1]
#define NCT6791_REG_HM_IO_SPACE_LOCK_ENABLE 0x28
static const u16 NCT6791_REG_WEIGHT_TEMP_SEL[6] = { 0, 0x239 };
static const u16 NCT6791_REG_WEIGHT_TEMP_STEP[6] = { 0, 0x23a };
static const u16 NCT6791_REG_WEIGHT_TEMP_STEP_TOL[6] = { 0, 0x23b };
static const u16 NCT6791_REG_WEIGHT_DUTY_STEP[6] = { 0, 0x23c };
static const u16 NCT6791_REG_WEIGHT_TEMP_BASE[6] = { 0, 0x23d };
static const u16 NCT6791_REG_WEIGHT_DUTY_BASE[6] = { 0, 0x23e };
static const u16 NCT6791_REG_ALARM[NUM_REG_ALARM] = {
0x459, 0x45A, 0x45B, 0x568, 0x45D };
......@@ -1311,6 +1318,9 @@ static void nct6775_update_pwm(struct device *dev)
if (reg & 0x80)
data->pwm[2][i] = 0;
if (!data->REG_WEIGHT_TEMP_SEL[i])
continue;
reg = nct6775_read_value(data, data->REG_WEIGHT_TEMP_SEL[i]);
data->pwm_weight_temp_sel[i] = reg & 0x1f;
/* If weight is disabled, report weight source as 0 */
......@@ -2856,6 +2866,9 @@ static umode_t nct6775_pwm_is_visible(struct kobject *kobj,
if (!(data->has_pwm & (1 << pwm)))
return 0;
if ((nr >= 14 && nr <= 18) || nr == 21) /* weight */
if (!data->REG_WEIGHT_TEMP_SEL[pwm])
return 0;
if (nr == 19 && data->REG_PWM[3] == NULL) /* pwm_max */
return 0;
if (nr == 20 && data->REG_PWM[4] == NULL) /* pwm_step */
......@@ -2949,11 +2962,11 @@ static struct sensor_device_template *nct6775_attributes_pwm_template[] = {
&sensor_dev_template_pwm_step_down_time,
&sensor_dev_template_pwm_start,
&sensor_dev_template_pwm_floor,
&sensor_dev_template_pwm_weight_temp_sel,
&sensor_dev_template_pwm_weight_temp_sel, /* 14 */
&sensor_dev_template_pwm_weight_temp_step,
&sensor_dev_template_pwm_weight_temp_step_tol,
&sensor_dev_template_pwm_weight_temp_step_base,
&sensor_dev_template_pwm_weight_duty_step,
&sensor_dev_template_pwm_weight_duty_step, /* 18 */
&sensor_dev_template_pwm_max, /* 19 */
&sensor_dev_template_pwm_step, /* 20 */
&sensor_dev_template_pwm_weight_duty_base, /* 21 */
......@@ -3615,8 +3628,8 @@ static int nct6775_probe(struct platform_device *pdev)
data->REG_PWM[0] = NCT6775_REG_PWM;
data->REG_PWM[1] = NCT6775_REG_FAN_START_OUTPUT;
data->REG_PWM[2] = NCT6775_REG_FAN_STOP_OUTPUT;
data->REG_PWM[5] = NCT6775_REG_WEIGHT_DUTY_STEP;
data->REG_PWM[6] = NCT6776_REG_WEIGHT_DUTY_BASE;
data->REG_PWM[5] = NCT6791_REG_WEIGHT_DUTY_STEP;
data->REG_PWM[6] = NCT6791_REG_WEIGHT_DUTY_BASE;
data->REG_PWM_READ = NCT6775_REG_PWM_READ;
data->REG_PWM_MODE = NCT6776_REG_PWM_MODE;
data->PWM_MODE_MASK = NCT6776_PWM_MODE_MASK;
......@@ -3632,10 +3645,10 @@ static int nct6775_probe(struct platform_device *pdev)
data->REG_TEMP_OFFSET = NCT6779_REG_TEMP_OFFSET;
data->REG_TEMP_SOURCE = NCT6775_REG_TEMP_SOURCE;
data->REG_TEMP_SEL = NCT6775_REG_TEMP_SEL;
data->REG_WEIGHT_TEMP_SEL = NCT6775_REG_WEIGHT_TEMP_SEL;
data->REG_WEIGHT_TEMP[0] = NCT6775_REG_WEIGHT_TEMP_STEP;
data->REG_WEIGHT_TEMP[1] = NCT6775_REG_WEIGHT_TEMP_STEP_TOL;
data->REG_WEIGHT_TEMP[2] = NCT6775_REG_WEIGHT_TEMP_BASE;
data->REG_WEIGHT_TEMP_SEL = NCT6791_REG_WEIGHT_TEMP_SEL;
data->REG_WEIGHT_TEMP[0] = NCT6791_REG_WEIGHT_TEMP_STEP;
data->REG_WEIGHT_TEMP[1] = NCT6791_REG_WEIGHT_TEMP_STEP_TOL;
data->REG_WEIGHT_TEMP[2] = NCT6791_REG_WEIGHT_TEMP_BASE;
data->REG_ALARM = NCT6791_REG_ALARM;
data->REG_BEEP = NCT6776_REG_BEEP;
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册