net/mlx5e: Support offloading double vlan push/pop tc actions

As we can configure two push/pop actions in one flow table entry,
add support to offload those double vlan actions in a rule to HW.
Signed-off-by: NJianbo Liu <jianbol@mellanox.com>
Reviewed-by: NOr Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com>

drivers/net/ethernet/mellanox/mlx5/core/en_tc.c

@@ -2583,24 +2583,48 @@ static int parse_tc_vlan_action(struct mlx5e_priv *priv,
 				struct mlx5_esw_flow_attr *attr,
 				u32 *action)
 {
+	u8 vlan_idx = attr->total_vlan;
+
+	if (vlan_idx >= MLX5_FS_VLAN_DEPTH)
+		return -EOPNOTSUPP;
+
 	if (tcf_vlan_action(a) == TCA_VLAN_ACT_POP) {
-		*action |= MLX5_FLOW_CONTEXT_ACTION_VLAN_POP;
+		if (vlan_idx) {
+			if (!mlx5_eswitch_vlan_actions_supported(priv->mdev,
+								 MLX5_FS_VLAN_DEPTH))
+				return -EOPNOTSUPP;
+
+			*action |= MLX5_FLOW_CONTEXT_ACTION_VLAN_POP_2;
+		} else {
+			*action |= MLX5_FLOW_CONTEXT_ACTION_VLAN_POP;
+		}
 	} else if (tcf_vlan_action(a) == TCA_VLAN_ACT_PUSH) {
-		*action |= MLX5_FLOW_CONTEXT_ACTION_VLAN_PUSH;
-		attr->vlan_vid[0] = tcf_vlan_push_vid(a);
-		if (mlx5_eswitch_vlan_actions_supported(priv->mdev)) {
-			attr->vlan_prio[0] = tcf_vlan_push_prio(a);
-			attr->vlan_proto[0] = tcf_vlan_push_proto(a);
-			if (!attr->vlan_proto[0])
-				attr->vlan_proto[0] = htons(ETH_P_8021Q);
-		} else if (tcf_vlan_push_proto(a) != htons(ETH_P_8021Q) ||
-			   tcf_vlan_push_prio(a)) {
-			return -EOPNOTSUPP;
+		attr->vlan_vid[vlan_idx] = tcf_vlan_push_vid(a);
+		attr->vlan_prio[vlan_idx] = tcf_vlan_push_prio(a);
+		attr->vlan_proto[vlan_idx] = tcf_vlan_push_proto(a);
+		if (!attr->vlan_proto[vlan_idx])
+			attr->vlan_proto[vlan_idx] = htons(ETH_P_8021Q);
+
+		if (vlan_idx) {
+			if (!mlx5_eswitch_vlan_actions_supported(priv->mdev,
+								 MLX5_FS_VLAN_DEPTH))
+				return -EOPNOTSUPP;
+
+			*action |= MLX5_FLOW_CONTEXT_ACTION_VLAN_PUSH_2;
+		} else {
+			if (!mlx5_eswitch_vlan_actions_supported(priv->mdev, 1) &&
+			    (tcf_vlan_push_proto(a) != htons(ETH_P_8021Q) ||
+			     tcf_vlan_push_prio(a)))
+				return -EOPNOTSUPP;
+
+			*action |= MLX5_FLOW_CONTEXT_ACTION_VLAN_PUSH;
 		}
 	} else { /* action is TCA_VLAN_ACT_MODIFY */
 		return -EOPNOTSUPP;
 	}
 
+	attr->total_vlan = vlan_idx + 1;
+
 	return 0;
 }
 

drivers/net/ethernet/mellanox/mlx5/core/eswitch.h

@@ -38,6 +38,7 @@
 #include <net/devlink.h>
 #include <linux/mlx5/device.h>
 #include <linux/mlx5/eswitch.h>
+#include <linux/mlx5/fs.h>
 #include "lib/mpfs.h"
 
 #ifdef CONFIG_MLX5_ESWITCH
@@ -256,9 +257,10 @@ struct mlx5_esw_flow_attr {
 	int out_count;
 
 	int	action;
-	__be16	vlan_proto[1];
-	u16	vlan_vid[1];
-	u8	vlan_prio[1];
+	__be16	vlan_proto[MLX5_FS_VLAN_DEPTH];
+	u16	vlan_vid[MLX5_FS_VLAN_DEPTH];
+	u8	vlan_prio[MLX5_FS_VLAN_DEPTH];
+	u8	total_vlan;
 	bool	vlan_handled;
 	u32	encap_id;
 	u32	mod_hdr_id;
@@ -282,10 +284,17 @@ int mlx5_eswitch_del_vlan_action(struct mlx5_eswitch *esw,
 int __mlx5_eswitch_set_vport_vlan(struct mlx5_eswitch *esw,
 				  int vport, u16 vlan, u8 qos, u8 set_flags);
 
-static inline bool mlx5_eswitch_vlan_actions_supported(struct mlx5_core_dev *dev)
+static inline bool mlx5_eswitch_vlan_actions_supported(struct mlx5_core_dev *dev,
+						       u8 vlan_depth)
 {
-	return MLX5_CAP_ESW_FLOWTABLE_FDB(dev, pop_vlan) &&
-	       MLX5_CAP_ESW_FLOWTABLE_FDB(dev, push_vlan);
+	bool ret = MLX5_CAP_ESW_FLOWTABLE_FDB(dev, pop_vlan) &&
+		   MLX5_CAP_ESW_FLOWTABLE_FDB(dev, push_vlan);
+
+	if (vlan_depth == 1)
+		return ret;
+
+	return  ret && MLX5_CAP_ESW_FLOWTABLE_FDB(dev, pop_vlan_2) &&
+		MLX5_CAP_ESW_FLOWTABLE_FDB(dev, push_vlan_2);
 }
 
 #define MLX5_DEBUG_ESWITCH_MASK BIT(3)

drivers/net/ethernet/mellanox/mlx5/core/eswitch_offloads.c

@@ -66,13 +66,18 @@ mlx5_eswitch_add_offloaded_rule(struct mlx5_eswitch *esw,
 
 	flow_act.action = attr->action;
 	/* if per flow vlan pop/push is emulated, don't set that into the firmware */
-	if (!mlx5_eswitch_vlan_actions_supported(esw->dev))
+	if (!mlx5_eswitch_vlan_actions_supported(esw->dev, 1))
 		flow_act.action &= ~(MLX5_FLOW_CONTEXT_ACTION_VLAN_PUSH |
 				     MLX5_FLOW_CONTEXT_ACTION_VLAN_POP);
 	else if (flow_act.action & MLX5_FLOW_CONTEXT_ACTION_VLAN_PUSH) {
 		flow_act.vlan[0].ethtype = ntohs(attr->vlan_proto[0]);
 		flow_act.vlan[0].vid = attr->vlan_vid[0];
 		flow_act.vlan[0].prio = attr->vlan_prio[0];
+		if (flow_act.action & MLX5_FLOW_CONTEXT_ACTION_VLAN_PUSH_2) {
+			flow_act.vlan[1].ethtype = ntohs(attr->vlan_proto[1]);
+			flow_act.vlan[1].vid = attr->vlan_vid[1];
+			flow_act.vlan[1].prio = attr->vlan_prio[1];
+		}
 	}
 
 	if (flow_act.action & MLX5_FLOW_CONTEXT_ACTION_FWD_DEST) {
@@ -284,7 +289,7 @@ int mlx5_eswitch_add_vlan_action(struct mlx5_eswitch *esw,
 	int err = 0;
 
 	/* nop if we're on the vlan push/pop non emulation mode */
-	if (mlx5_eswitch_vlan_actions_supported(esw->dev))
+	if (mlx5_eswitch_vlan_actions_supported(esw->dev, 1))
 		return 0;
 
 	push = !!(attr->action & MLX5_FLOW_CONTEXT_ACTION_VLAN_PUSH);
@@ -347,7 +352,7 @@ int mlx5_eswitch_del_vlan_action(struct mlx5_eswitch *esw,
 	int err = 0;
 
 	/* nop if we're on the vlan push/pop non emulation mode */
-	if (mlx5_eswitch_vlan_actions_supported(esw->dev))
+	if (mlx5_eswitch_vlan_actions_supported(esw->dev, 1))
 		return 0;
 
 	if (!attr->vlan_handled)