sh: Renesas R0P7785LC0011RL board support

This adds initial support for the Renesas R0P7785LC0011RL board.
This patch supports 29bit address mode only.
Signed-off-by: NYoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
Signed-off-by: NPaul Mundt <lethal@linux-sh.org>

arch/sh/Kconfig

@@ -495,6 +495,21 @@ config SH_HIGHLANDER
 	select SYS_SUPPORTS_PCI
 	select IO_TRAPPED
 
+config SH_SH7785LCR
+	bool "SH7785LCR"
+	depends on CPU_SUBTYPE_SH7785
+	select SYS_SUPPORTS_PCI
+	select IO_TRAPPED
+
+config SH_SH7785LCR_29BIT_PHYSMAPS
+	bool "SH7785LCR 29bit physmaps"
+	depends on SH_SH7785LCR
+	default y
+	help
+	  This board has 2 physical memory maps. It can be changed with
+	  DIP switch(S2-5). If you set the DIP switch for S2-5 = ON,
+	  you can access all on-board device in 29bit address mode.
+
 config SH_MIGOR
 	bool "Migo-R"
 	depends on CPU_SUBTYPE_SH7722

arch/sh/Makefile

@@ -124,6 +124,7 @@ machdir-$(CONFIG_SH_X3PROTO)			+= renesas/x3proto
 machdir-$(CONFIG_SH_RSK7203)			+= renesas/rsk7203
 machdir-$(CONFIG_SH_AP325RXA)			+= renesas/ap325rxa
 machdir-$(CONFIG_SH_SH7763RDP)			+= renesas/sh7763rdp
+machdir-$(CONFIG_SH_SH7785LCR)			+= renesas/sh7785lcr
 machdir-$(CONFIG_SH_SH4202_MICRODEV)		+= superh/microdev
 machdir-$(CONFIG_SH_LANDISK)			+= landisk
 machdir-$(CONFIG_SH_TITAN)			+= titan

arch/sh/boards/renesas/sh7785lcr/Makefile

+obj-y	 := setup.o

arch/sh/boards/renesas/sh7785lcr/setup.c

+/*
+ * Renesas Technology Corp. R0P7785LC0011RL Support.
+ *
+ * Copyright (C) 2008  Yoshihiro Shimoda
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/sm501.h>
+#include <linux/sm501-regs.h>
+#include <linux/fb.h>
+#include <linux/mtd/physmap.h>
+#include <linux/delay.h>
+#include <linux/i2c.h>
+#include <linux/i2c-pca-platform.h>
+#include <linux/i2c-algo-pca.h>
+#include <asm/heartbeat.h>
+#include <asm/sh7785lcr.h>
+
+/*
+ * NOTE: This board has 2 physical memory maps.
+ *	 Please look at include/asm-sh/sh7785lcr.h or hardware manual.
+ */
+static struct resource heartbeat_resources[] = {
+	[0] = {
+		.start	= PLD_LEDCR,
+		.end	= PLD_LEDCR,
+		.flags	= IORESOURCE_MEM,
+	},
+};
+
+static struct heartbeat_data heartbeat_data = {
+	.regsize = 8,
+};
+
+static struct platform_device heartbeat_device = {
+	.name		= "heartbeat",
+	.id		= -1,
+	.dev	= {
+		.platform_data	= &heartbeat_data,
+	},
+	.num_resources	= ARRAY_SIZE(heartbeat_resources),
+	.resource	= heartbeat_resources,
+};
+
+static struct mtd_partition nor_flash_partitions[] = {
+	{
+		.name		= "loader",
+		.offset		= 0x00000000,
+		.size		= 512 * 1024,
+	},
+	{
+		.name		= "bootenv",
+		.offset		= MTDPART_OFS_APPEND,
+		.size		= 512 * 1024,
+	},
+	{
+		.name		= "kernel",
+		.offset		= MTDPART_OFS_APPEND,
+		.size		= 4 * 1024 * 1024,
+	},
+	{
+		.name		= "data",
+		.offset		= MTDPART_OFS_APPEND,
+		.size		= MTDPART_SIZ_FULL,
+	},
+};
+
+static struct physmap_flash_data nor_flash_data = {
+	.width		= 4,
+	.parts		= nor_flash_partitions,
+	.nr_parts	= ARRAY_SIZE(nor_flash_partitions),
+};
+
+static struct resource nor_flash_resources[] = {
+	[0]	= {
+		.start	= NOR_FLASH_ADDR,
+		.end	= NOR_FLASH_ADDR + NOR_FLASH_SIZE - 1,
+		.flags	= IORESOURCE_MEM,
+	}
+};
+
+static struct platform_device nor_flash_device = {
+	.name		= "physmap-flash",
+	.dev		= {
+		.platform_data	= &nor_flash_data,
+	},
+	.num_resources	= ARRAY_SIZE(nor_flash_resources),
+	.resource	= nor_flash_resources,
+};
+
+static struct resource r8a66597_usb_host_resources[] = {
+	[0] = {
+		.name	= "r8a66597_hcd",
+		.start	= R8A66597_ADDR,
+		.end	= R8A66597_ADDR + R8A66597_SIZE - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.name	= "r8a66597_hcd",
+		.start	= 2,
+		.end	= 2,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device r8a66597_usb_host_device = {
+	.name		= "r8a66597_hcd",
+	.id		= -1,
+	.dev = {
+		.dma_mask		= NULL,
+		.coherent_dma_mask	= 0xffffffff,
+	},
+	.num_resources	= ARRAY_SIZE(r8a66597_usb_host_resources),
+	.resource	= r8a66597_usb_host_resources,
+};
+
+static struct resource sm501_resources[] = {
+	[0]	= {
+		.start	= SM107_MEM_ADDR,
+		.end	= SM107_MEM_ADDR + SM107_MEM_SIZE - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1]	= {
+		.start	= SM107_REG_ADDR,
+		.end	= SM107_REG_ADDR + SM107_REG_SIZE - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[2]	= {
+		.start	= 10,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct fb_videomode sm501_default_mode_crt = {
+	.pixclock	= 35714,	/* 28MHz */
+	.xres		= 640,
+	.yres		= 480,
+	.left_margin	= 105,
+	.right_margin	= 16,
+	.upper_margin	= 33,
+	.lower_margin	= 10,
+	.hsync_len	= 39,
+	.vsync_len	= 2,
+	.sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
+};
+
+static struct fb_videomode sm501_default_mode_pnl = {
+	.pixclock	= 40000,	/* 25MHz */
+	.xres		= 640,
+	.yres		= 480,
+	.left_margin	= 2,
+	.right_margin	= 16,
+	.upper_margin	= 33,
+	.lower_margin	= 10,
+	.hsync_len	= 39,
+	.vsync_len	= 2,
+	.sync		= 0,
+};
+
+static struct sm501_platdata_fbsub sm501_pdata_fbsub_pnl = {
+	.def_bpp	= 16,
+	.def_mode	= &sm501_default_mode_pnl,
+	.flags		= SM501FB_FLAG_USE_INIT_MODE |
+			  SM501FB_FLAG_USE_HWCURSOR |
+			  SM501FB_FLAG_USE_HWACCEL |
+			  SM501FB_FLAG_DISABLE_AT_EXIT |
+			  SM501FB_FLAG_PANEL_NO_VBIASEN,
+};
+
+static struct sm501_platdata_fbsub sm501_pdata_fbsub_crt = {
+	.def_bpp	= 16,
+	.def_mode	= &sm501_default_mode_crt,
+	.flags		= SM501FB_FLAG_USE_INIT_MODE |
+			  SM501FB_FLAG_USE_HWCURSOR |
+			  SM501FB_FLAG_USE_HWACCEL |
+			  SM501FB_FLAG_DISABLE_AT_EXIT,
+};
+
+static struct sm501_platdata_fb sm501_fb_pdata = {
+	.fb_route	= SM501_FB_OWN,
+	.fb_crt		= &sm501_pdata_fbsub_crt,
+	.fb_pnl		= &sm501_pdata_fbsub_pnl,
+};
+
+static struct sm501_initdata sm501_initdata = {
+	.gpio_high	= {
+		.set	= 0x00001fe0,
+		.mask	= 0x0,
+	},
+	.devices	= 0,
+	.mclk		= 84 * 1000000,
+	.m1xclk		= 112 * 1000000,
+};
+
+static struct sm501_platdata sm501_platform_data = {
+	.init		= &sm501_initdata,
+	.fb		= &sm501_fb_pdata,
+};
+
+static struct platform_device sm501_device = {
+	.name		= "sm501",
+	.id		= -1,
+	.dev		= {
+		.platform_data	= &sm501_platform_data,
+	},
+	.num_resources	= ARRAY_SIZE(sm501_resources),
+	.resource	= sm501_resources,
+};
+
+static struct resource i2c_resources[] = {
+	[0] = {
+		.start	= PCA9564_ADDR,
+		.end	= PCA9564_ADDR + PCA9564_SIZE - 1,
+		.flags	= IORESOURCE_MEM | IORESOURCE_MEM_8BIT,
+	},
+	[1] = {
+		.start	= 12,
+		.end	= 12,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct i2c_pca9564_pf_platform_data i2c_platform_data = {
+	.gpio			= 0,
+	.i2c_clock_speed	= I2C_PCA_CON_330kHz,
+	.timeout		= 100,
+};
+
+static struct platform_device i2c_device = {
+	.name		= "i2c-pca-platform",
+	.id		= -1,
+	.dev		= {
+		.platform_data	= &i2c_platform_data,
+	},
+	.num_resources	= ARRAY_SIZE(i2c_resources),
+	.resource	= i2c_resources,
+};
+
+static struct platform_device *sh7785lcr_devices[] __initdata = {
+	&heartbeat_device,
+	&nor_flash_device,
+	&r8a66597_usb_host_device,
+	&sm501_device,
+	&i2c_device,
+};
+
+static struct i2c_board_info __initdata sh7785lcr_i2c_devices[] = {
+	{
+		I2C_BOARD_INFO("r2025sd", 0x32),
+	},
+};
+
+static int __init sh7785lcr_devices_setup(void)
+{
+	i2c_register_board_info(0, sh7785lcr_i2c_devices,
+				ARRAY_SIZE(sh7785lcr_i2c_devices));
+
+	return platform_add_devices(sh7785lcr_devices,
+				    ARRAY_SIZE(sh7785lcr_devices));
+}
+__initcall(sh7785lcr_devices_setup);
+
+/* Initialize IRQ setting */
+void __init init_sh7785lcr_IRQ(void)
+{
+	plat_irq_setup_pins(IRQ_MODE_IRQ7654);
+	plat_irq_setup_pins(IRQ_MODE_IRQ3210);
+}
+
+static void sh7785lcr_power_off(void)
+{
+	ctrl_outb(0x01, P2SEGADDR(PLD_POFCR));
+}
+
+/* Initialize the board */
+static void __init sh7785lcr_setup(char **cmdline_p)
+{
+	void __iomem *sm501_reg;
+
+	printk(KERN_INFO "Renesas Technology Corp. R0P7785LC0011RL support.\n");
+
+	pm_power_off = sh7785lcr_power_off;
+
+	/* sm501 DRAM configuration */
+	sm501_reg = (void __iomem *)0xb3e00000 + SM501_DRAM_CONTROL;
+	writel(0x000307c2, sm501_reg);
+}
+
+/*
+ * The Machine Vector
+ */
+static struct sh_machine_vector mv_sh7785lcr __initmv = {
+	.mv_name		= "SH7785LCR",
+	.mv_setup		= sh7785lcr_setup,
+	.mv_init_irq		= init_sh7785lcr_IRQ,
+};
+

arch/sh/drivers/pci/Makefile

@@ -23,3 +23,4 @@ obj-$(CONFIG_SH_LANDISK)		+= ops-landisk.o
 obj-$(CONFIG_SH_LBOX_RE2)		+= ops-lboxre2.o fixups-lboxre2.o
 obj-$(CONFIG_SH_7780_SOLUTION_ENGINE)	+= ops-se7780.o fixups-se7780.o
 obj-$(CONFIG_SH_CAYMAN)			+= ops-cayman.o
+obj-$(CONFIG_SH_SH7785LCR)		+= ops-sh7785lcr.o fixups-sh7785lcr.o

arch/sh/drivers/pci/fixups-sh7785lcr.c

+/*
+ * arch/sh/drivers/pci/fixups-sh7785lcr.c
+ *
+ * R0P7785LC0011RL PCI fixups
+ * Copyright (C) 2008  Yoshihiro Shimoda
+ *
+ * Based on arch/sh/drivers/pci/fixups-r7780rp.c
+ * Copyright (C) 2003  Lineo uSolutions, Inc.
+ * Copyright (C) 2004 - 2006  Paul Mundt
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/pci.h>
+#include "pci-sh4.h"
+
+int pci_fixup_pcic(void)
+{
+	pci_write_reg(0x000043ff, SH4_PCIINTM);
+	pci_write_reg(0x0000380f, SH4_PCIAINTM);
+
+	pci_write_reg(0xfbb00047, SH7780_PCICMD);
+	pci_write_reg(0x00000000, SH7780_PCIIBAR);
+
+	pci_write_reg(0x00011912, SH7780_PCISVID);
+	pci_write_reg(0x08000000, SH7780_PCICSCR0);
+	pci_write_reg(0x0000001b, SH7780_PCICSAR0);
+	pci_write_reg(0xfd000000, SH7780_PCICSCR1);
+	pci_write_reg(0x0000000f, SH7780_PCICSAR1);
+
+	pci_write_reg(0xfd000000, SH7780_PCIMBR0);
+	pci_write_reg(0x00fc0000, SH7780_PCIMBMR0);
+
+#ifdef CONFIG_32BIT
+	pci_write_reg(0xc0000000, SH7780_PCIMBR2);
+	pci_write_reg(0x20000000 - SH7780_PCI_IO_SIZE, SH7780_PCIMBMR2);
+#endif
+
+	/* Set IOBR for windows containing area specified in pci.h */
+	pci_write_reg((PCIBIOS_MIN_IO & ~(SH7780_PCI_IO_SIZE - 1)),
+		      SH7780_PCIIOBR);
+	pci_write_reg(((SH7780_PCI_IO_SIZE - 1) & (7 << 18)), SH7780_PCIIOBMR);
+
+	return 0;
+}

arch/sh/drivers/pci/ops-sh7785lcr.c

+/*
+ * Author:  Ian DaSilva (idasilva@mvista.com)
+ *
+ * Highly leveraged from pci-bigsur.c, written by Dustin McIntire.
+ *
+ * May be copied or modified under the terms of the GNU General Public
+ * License.  See linux/COPYING for more information.
+ *
+ * PCI initialization for the Renesas R0P7785LC0011RL board
+ * Based on arch/sh/drivers/pci/ops-r7780rp.c
+ *
+ */
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/pci.h>
+#include "pci-sh4.h"
+
+static char irq_tab[] __initdata = {
+	65, 66, 67, 68,
+};
+
+int __init pcibios_map_platform_irq(struct pci_dev *pdev, u8 slot, u8 pin)
+{
+	return irq_tab[slot];
+}
+
+static struct resource sh7785_io_resource = {
+	.name	= "SH7785_IO",
+	.start	= SH7780_PCI_IO_BASE,
+	.end	= SH7780_PCI_IO_BASE + SH7780_PCI_IO_SIZE - 1,
+	.flags	= IORESOURCE_IO
+};
+
+static struct resource sh7785_mem_resource = {
+	.name	= "SH7785_mem",
+	.start	= SH7780_PCI_MEMORY_BASE,
+	.end	= SH7780_PCI_MEMORY_BASE + SH7780_PCI_MEM_SIZE - 1,
+	.flags	= IORESOURCE_MEM
+};
+
+struct pci_channel board_pci_channels[] = {
+	{ &sh4_pci_ops, &sh7785_io_resource, &sh7785_mem_resource, 0, 0xff },
+	{ NULL, NULL, NULL, 0, 0 },
+};
+EXPORT_SYMBOL(board_pci_channels);
+
+static struct sh4_pci_address_map sh7785_pci_map = {
+	.window0	= {
+		.base	= SH7780_CS2_BASE_ADDR,
+		.size	= 0x04000000,
+	},
+
+	.window1	= {
+		.base	= SH7780_CS3_BASE_ADDR,
+		.size	= 0x04000000,
+	},
+
+	.flags	= SH4_PCIC_NO_RESET,
+};
+
+int __init pcibios_init_platform(void)
+{
+	return sh7780_pcic_init(&sh7785_pci_map);
+}

arch/sh/tools/mach-types

@@ -49,3 +49,4 @@ MIGOR			SH_MIGOR
 RSK7203			SH_RSK7203
 AP325RXA		SH_AP325RXA
 SH7763RDP		SH_SH7763RDP
+SH7785LCR		SH_SH7785LCR

include/asm-sh/sh7785lcr.h

+#ifndef __ASM_SH_RENESAS_SH7785LCR_H
+#define __ASM_SH_RENESAS_SH7785LCR_H
+
+/*
+ * This board has 2 physical memory maps.
+ * It can be changed with DIP switch(S2-5).
+ *
+ * phys address			| S2-5 = OFF	| S2-5 = ON
+ * -----------------------------+---------------+---------------
+ * 0x00000000 - 0x03ffffff(CS0)	| NOR Flash	| NOR Flash
+ * 0x04000000 - 0x05ffffff(CS1)	| PLD		| PLD
+ * 0x06000000 - 0x07ffffff(CS1)	| reserved	| I2C
+ * 0x08000000 - 0x0bffffff(CS2)	| USB		| DDR SDRAM
+ * 0x0c000000 - 0x0fffffff(CS3)	| SD		| DDR SDRAM
+ * 0x10000000 - 0x13ffffff(CS4)	| SM107		| SM107
+ * 0x14000000 - 0x17ffffff(CS5)	| I2C		| USB
+ * 0x18000000 - 0x1bffffff(CS6)	| reserved	| SD
+ * 0x40000000 - 0x5fffffff	| DDR SDRAM	| (cannot use)
+ *
+ */
+
+#define NOR_FLASH_ADDR		0x00000000
+#define NOR_FLASH_SIZE		0x04000000
+
+#define PLD_BASE_ADDR		0x04000000
+#define PLD_PCICR		(PLD_BASE_ADDR + 0x00)
+#define PLD_LCD_BK_CONTR	(PLD_BASE_ADDR + 0x02)
+#define PLD_LOCALCR		(PLD_BASE_ADDR + 0x04)
+#define PLD_POFCR		(PLD_BASE_ADDR + 0x06)
+#define PLD_LEDCR		(PLD_BASE_ADDR + 0x08)
+#define PLD_SWSR		(PLD_BASE_ADDR + 0x0a)
+#define PLD_VERSR		(PLD_BASE_ADDR + 0x0c)
+#define PLD_MMSR		(PLD_BASE_ADDR + 0x0e)
+
+#define SM107_MEM_ADDR		0x10000000
+#define SM107_MEM_SIZE		0x00e00000
+#define SM107_REG_ADDR		0x13e00000
+#define SM107_REG_SIZE		0x00200000
+
+#if defined(CONFIG_SH_SH7785LCR_29BIT_PHYSMAPS)
+#define R8A66597_ADDR		0x14000000	/* USB */
+#define CG200_ADDR		0x18000000	/* SD */
+#define PCA9564_ADDR		0x06000000	/* I2C */
+#else
+#define R8A66597_ADDR		0x08000000
+#define CG200_ADDR		0x0c000000
+#define PCA9564_ADDR		0x14000000
+#endif
+
+#define R8A66597_SIZE		0x00000100
+#define CG200_SIZE		0x00010000
+#define PCA9564_SIZE		0x00000100
+
+#endif  /* __ASM_SH_RENESAS_SH7785LCR_H */
+