提交 cbd1f7fb 编写于 作者: E Erik Andrén 提交者: Mauro Carvalho Chehab

V4L/DVB (12977): gspca - m5602-ov7660: Create blue gain control

Hook up a blue gain v4l2 controller
Signed-off-by: NErik Andrén <erik.andren@gmail.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
上级 b8298e7e
......@@ -20,6 +20,8 @@
static int ov7660_get_gain(struct gspca_dev *gspca_dev, __s32 *val);
static int ov7660_set_gain(struct gspca_dev *gspca_dev, __s32 val);
static int ov7660_get_blue_gain(struct gspca_dev *gspca_dev, __s32 *val);
static int ov7660_set_blue_gain(struct gspca_dev *gspca_dev, __s32 val);
const static struct ctrl ov7660_ctrls[] = {
#define GAIN_IDX 1
......@@ -37,6 +39,22 @@ const static struct ctrl ov7660_ctrls[] = {
.set = ov7660_set_gain,
.get = ov7660_get_gain
},
#define BLUE_BALANCE_IDX 2
{
{
.id = V4L2_CID_BLUE_BALANCE,
.type = V4L2_CTRL_TYPE_INTEGER,
.name = "blue balance",
.minimum = 0x00,
.maximum = 0x7f,
.step = 0x1,
.default_value = OV7660_DEFAULT_BLUE_GAIN,
.flags = V4L2_CTRL_FLAG_SLIDER
},
.set = ov7660_set_blue_gain,
.get = ov7660_get_blue_gain
},
};
static struct v4l2_pix_format ov7660_modes[] = {
......@@ -194,6 +212,31 @@ static int ov7660_set_gain(struct gspca_dev *gspca_dev, __s32 val)
return err;
}
static int ov7660_get_blue_gain(struct gspca_dev *gspca_dev, __s32 *val)
{
struct sd *sd = (struct sd *) gspca_dev;
s32 *sensor_settings = sd->sensor_priv;
*val = sensor_settings[BLUE_BALANCE_IDX];
PDEBUG(D_V4L2, "Read blue balance %d", *val);
return 0;
}
static int ov7660_set_blue_gain(struct gspca_dev *gspca_dev, __s32 val)
{
int err;
u8 i2c_data;
struct sd *sd = (struct sd *) gspca_dev;
s32 *sensor_settings = sd->sensor_priv;
PDEBUG(D_V4L2, "Setting blue balance to %d", val);
sensor_settings[BLUE_BALANCE_IDX] = val;
err = m5602_write_sensor(sd, OV7660_BLUE_GAIN, &i2c_data, 1);
return err;
}
static void ov7660_dump_registers(struct sd *sd)
{
int address;
......
......@@ -66,23 +66,23 @@
#define OV7660_RBIAS 0x2c
#define OV7660_HREF 0x32
#define OV7660_ADC 0x37
#define OV7660_OFON 0x39
#define OV7660_TSLB 0x3a
#define OV7660_COM12 0x3c
#define OV7660_COM13 0x3d
#define OV7660_OFON 0x39
#define OV7660_TSLB 0x3a
#define OV7660_COM12 0x3c
#define OV7660_COM13 0x3d
#define OV7660_LCC1 0x62
#define OV7660_LCC2 0x63
#define OV7660_LCC3 0x64
#define OV7660_LCC4 0x65
#define OV7660_LCC5 0x66
#define OV7660_HV 0x69
#define OV7660_RSVDA1 0xa1
#define OV7660_HV 0x69
#define OV7660_RSVDA1 0xa1
#define OV7660_DEFAULT_GAIN 0x0e
#define OV7660_DEFAULT_RED_GAIN 0x80
#define OV7660_DEFAULT_RED_GAIN 0x80
#define OV7660_DEFAULT_BLUE_GAIN 0x80
#define OV7660_DEFAULT_SATURATION 0x00
#define OV7660_DEFAULT_EXPOSURE 0x20
#define OV7660_DEFAULT_EXPOSURE 0x20
/* Kernel module parameters */
extern int force_sensor;
......@@ -199,8 +199,6 @@ static const unsigned char init_ov7660[][4] =
{SENSOR, OV7660_COM7, 0x80},
{SENSOR, OV7660_CLKRC, 0x80},
{SENSOR, OV7660_BLUE_GAIN, 0x80},
{SENSOR, OV7660_RED_GAIN, 0x80},
{SENSOR, OV7660_COM9, 0x4c},
{SENSOR, OV7660_OFON, 0x43},
{SENSOR, OV7660_COM12, 0x28},
......@@ -264,8 +262,6 @@ static const unsigned char init_ov7660[][4] =
{SENSOR, OV7660_OFON, 0x0c},
{SENSOR, OV7660_COM2, 0x11},
{SENSOR, OV7660_COM7, 0x05},
{SENSOR, OV7660_BLUE_GAIN, 0x80},
{SENSOR, OV7660_RED_GAIN, 0x80},
{BRIDGE, M5602_XB_GPIO_DIR, 0x01},
{BRIDGE, M5602_XB_GPIO_DAT, 0x04},
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册