Skip to content

cloud-kernel
cloud-kernel

openanolis / cloud-kernel
大约 1 年 前同步成功

通知 158
Star 36
Fork 7
cloud-kernel
cloud-kernel
提交 cb5aa1c6 编写于 作者: H Hans Verkuil 提交者： Mauro Carvalho Chehab
浏览文件
操作

V4L/DVB (8376): cx25840: move cx25840_vbi_setup to core.c and rename to cx25840_std_setup 

cx25840_vbi_setup has nothing to do with setting up VBI, but everything
with setting up the standard. Move to cx25840-core.c and rename.
Signed-off-by: NHans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
上级 5de39b2b
隐藏空白更改
内联 并排
Showing with 155 addition and 152 deletion
drivers/media/video/cx25840/cx25840-core.c
浏览文件 @ cb5aa1c6
......@@ -237,7 +237,7 @@ static void cx25840_initialize(struct i2c_client *client)
cx25840_write(client, 0x8d3, 0x1f);
cx25840_write(client, 0x8e3, 0x03);
cx25840_vbi_setup(client);
cx25840_std_setup(client);
/* trial and error says these are needed to get audio */
cx25840_write(client, 0x914, 0xa0);
......@@ -337,7 +337,7 @@ static void cx23885_initialize(struct i2c_client *client)
finish_wait(&state->fw_wait, &wait);
destroy_workqueue(q);
cx25840_vbi_setup(client);
cx25840_std_setup(client);
/* (re)set input */
set_input(client, state->vid_input, state->aud_input);
......@@ -348,6 +348,153 @@ static void cx23885_initialize(struct i2c_client *client)
/* ----------------------------------------------------------------------- */
void cx25840_std_setup(struct i2c_client *client)
{
struct cx25840_state *state = i2c_get_clientdata(client);
v4l2_std_id std = state->std;
int hblank, hactive, burst, vblank, vactive, sc;
int vblank656, src_decimation;
int luma_lpf, uv_lpf, comb;
u32 pll_int, pll_frac, pll_post;
/* datasheet startup, step 8d */
if (std & ~V4L2_STD_NTSC)
cx25840_write(client, 0x49f, 0x11);
else
cx25840_write(client, 0x49f, 0x14);
if (std & V4L2_STD_625_50) {
hblank = 132;
hactive = 720;
burst = 93;
vblank = 36;
vactive = 580;
vblank656 = 40;
src_decimation = 0x21f;
luma_lpf = 2;
if (std & V4L2_STD_SECAM) {
uv_lpf = 0;
comb = 0;
sc = 0x0a425f;
} else if (std == V4L2_STD_PAL_Nc) {
uv_lpf = 1;
comb = 0x20;
sc = 556453;
} else {
uv_lpf = 1;
comb = 0x20;
sc = 688739;
}
} else {
hactive = 720;
hblank = 122;
vactive = 487;
luma_lpf = 1;
uv_lpf = 1;
src_decimation = 0x21f;
if (std == V4L2_STD_PAL_60) {
vblank = 26;
vblank656 = 26;
burst = 0x5b;
luma_lpf = 2;
comb = 0x20;
sc = 688739;
} else if (std == V4L2_STD_PAL_M) {
vblank = 20;
vblank656 = 24;
burst = 0x61;
comb = 0x20;
sc = 555452;
} else {
vblank = 26;
vblank656 = 26;
burst = 0x5b;
comb = 0x66;
sc = 556063;
}
}
/* DEBUG: Displays configured PLL frequency */
pll_int = cx25840_read(client, 0x108);
pll_frac = cx25840_read4(client, 0x10c) & 0x1ffffff;
pll_post = cx25840_read(client, 0x109);
v4l_dbg(1, cx25840_debug, client,
"PLL regs = int: %u, frac: %u, post: %u\n",
pll_int, pll_frac, pll_post);
if (pll_post) {
int fin, fsc;
int pll = (28636363L * ((((u64)pll_int) << 25L) + pll_frac)) >> 25L;
pll /= pll_post;
v4l_dbg(1, cx25840_debug, client, "PLL = %d.%06d MHz\n",
pll / 1000000, pll % 1000000);
v4l_dbg(1, cx25840_debug, client, "PLL/8 = %d.%06d MHz\n",
pll / 8000000, (pll / 8) % 1000000);
fin = ((u64)src_decimation * pll) >> 12;
v4l_dbg(1, cx25840_debug, client,
"ADC Sampling freq = %d.%06d MHz\n",
fin / 1000000, fin % 1000000);
fsc = (((u64)sc) * pll) >> 24L;
v4l_dbg(1, cx25840_debug, client,
"Chroma sub-carrier freq = %d.%06d MHz\n",
fsc / 1000000, fsc % 1000000);
v4l_dbg(1, cx25840_debug, client, "hblank %i, hactive %i, "
"vblank %i, vactive %i, vblank656 %i, src_dec %i, "
"burst 0x%02x, luma_lpf %i, uv_lpf %i, comb 0x%02x, "
"sc 0x%06x\n",
hblank, hactive, vblank, vactive, vblank656,
src_decimation, burst, luma_lpf, uv_lpf, comb, sc);
}
/* Sets horizontal blanking delay and active lines */
cx25840_write(client, 0x470, hblank);
cx25840_write(client, 0x471,
0xff & (((hblank >> 8) & 0x3) | (hactive << 4)));
cx25840_write(client, 0x472, hactive >> 4);
/* Sets burst gate delay */
cx25840_write(client, 0x473, burst);
/* Sets vertical blanking delay and active duration */
cx25840_write(client, 0x474, vblank);
cx25840_write(client, 0x475,
0xff & (((vblank >> 8) & 0x3) | (vactive << 4)));
cx25840_write(client, 0x476, vactive >> 4);
cx25840_write(client, 0x477, vblank656);
/* Sets src decimation rate */
cx25840_write(client, 0x478, 0xff & src_decimation);
cx25840_write(client, 0x479, 0xff & (src_decimation >> 8));
/* Sets Luma and UV Low pass filters */
cx25840_write(client, 0x47a, luma_lpf << 6 | ((uv_lpf << 4) & 0x30));
/* Enables comb filters */
cx25840_write(client, 0x47b, comb);
/* Sets SC Step*/
cx25840_write(client, 0x47c, sc);
cx25840_write(client, 0x47d, 0xff & sc >> 8);
cx25840_write(client, 0x47e, 0xff & sc >> 16);
/* Sets VBI parameters */
if (std & V4L2_STD_625_50) {
cx25840_write(client, 0x47f, 0x01);
state->vbi_line_offset = 5;
} else {
cx25840_write(client, 0x47f, 0x00);
state->vbi_line_offset = 8;
}
}
/* ----------------------------------------------------------------------- */
static void input_change(struct i2c_client *client)
{
struct cx25840_state *state = i2c_get_clientdata(client);
......@@ -565,7 +712,7 @@ static int set_v4lstd(struct i2c_client *client)
}
cx25840_and_or(client, 0x400, ~0xf, fmt);
cx25840_and_or(client, 0x403, ~0x3, pal_m);
cx25840_vbi_setup(client);
cx25840_std_setup(client);
if (!state->is_cx25836)
input_change(client);
return 0;
......
drivers/media/video/cx25840/cx25840-core.h
浏览文件 @ cb5aa1c6
......@@ -61,6 +61,7 @@ int cx25840_write4(struct i2c_client *client, u16 addr, u32 value);
u8 cx25840_read(struct i2c_client *client, u16 addr);
u32 cx25840_read4(struct i2c_client *client, u16 addr);
int cx25840_and_or(struct i2c_client *client, u16 addr, unsigned mask, u8 value);
void cx25840_std_setup(struct i2c_client *client);
/* ----------------------------------------------------------------------- */
/* cx25850-firmware.c */
......@@ -73,7 +74,6 @@ void cx25840_audio_set_path(struct i2c_client *client);
/* ----------------------------------------------------------------------- */
/* cx25850-vbi.c */
void cx25840_vbi_setup(struct i2c_client *client);
int cx25840_vbi(struct i2c_client *client, unsigned int cmd, void *arg);
#endif
drivers/media/video/cx25840/cx25840-vbi.c
浏览文件 @ cb5aa1c6
......@@ -82,150 +82,6 @@ static int decode_vps(u8 * dst, u8 * p)
return err & 0xf0;
}
void cx25840_vbi_setup(struct i2c_client *client)
{
struct cx25840_state *state = i2c_get_clientdata(client);
v4l2_std_id std = state->std;
int hblank,hactive,burst,vblank,vactive,sc,vblank656,src_decimation;
int luma_lpf,uv_lpf, comb;
u32 pll_int,pll_frac,pll_post;
/* datasheet startup, step 8d */
if (std & ~V4L2_STD_NTSC) {
cx25840_write(client, 0x49f, 0x11);
} else {
cx25840_write(client, 0x49f, 0x14);
}
if (std & V4L2_STD_625_50) {
hblank=0x084;
hactive=0x2d0;
burst=0x5d;
vblank=0x024;
vactive=0x244;
vblank656=0x28;
src_decimation=0x21f;
luma_lpf=2;
if (std & V4L2_STD_SECAM) {
uv_lpf=0;
comb=0;
sc=0x0a425f;
} else if (std == V4L2_STD_PAL_Nc) {
uv_lpf=1;
comb=0x20;
sc=556453;
} else {
uv_lpf=1;
comb=0x20;
sc=0x0a8263;
}
} else {
hactive=720;
hblank=122;
vactive=487;
luma_lpf=1;
uv_lpf=1;
src_decimation=0x21f;
if (std == V4L2_STD_PAL_60) {
vblank=26;
vblank656=26;
burst=0x5b;
luma_lpf=2;
comb=0x20;
sc=0x0a8263;
} else if (std == V4L2_STD_PAL_M) {
vblank=20;
vblank656=24;
burst=0x61;
comb=0x20;
sc=555452;
} else {
vblank=26;
vblank656=26;
burst=0x5b;
comb=0x66;
sc=556063;
}
}
/* DEBUG: Displays configured PLL frequency */
pll_int=cx25840_read(client, 0x108);
pll_frac=cx25840_read4(client, 0x10c)&0x1ffffff;
pll_post=cx25840_read(client, 0x109);
v4l_dbg(1, cx25840_debug, client,
"PLL regs = int: %u, frac: %u, post: %u\n",
pll_int,pll_frac,pll_post);
if (pll_post) {
int fin, fsc;
int pll= (28636363L*((((u64)pll_int)<<25L)+pll_frac)) >>25L;
pll/=pll_post;
v4l_dbg(1, cx25840_debug, client, "PLL = %d.%06d MHz\n",
pll/1000000, pll%1000000);
v4l_dbg(1, cx25840_debug, client, "PLL/8 = %d.%06d MHz\n",
pll/8000000, (pll/8)%1000000);
fin=((u64)src_decimation*pll)>>12;
v4l_dbg(1, cx25840_debug, client, "ADC Sampling freq = "
"%d.%06d MHz\n",
fin/1000000,fin%1000000);
fsc= (((u64)sc)*pll) >> 24L;
v4l_dbg(1, cx25840_debug, client, "Chroma sub-carrier freq = "
"%d.%06d MHz\n",
fsc/1000000,fsc%1000000);
v4l_dbg(1, cx25840_debug, client, "hblank %i, hactive %i, "
"vblank %i, vactive %i, vblank656 %i, src_dec %i, "
"burst 0x%02x, luma_lpf %i, uv_lpf %i, comb 0x%02x,"
" sc 0x%06x\n",
hblank, hactive, vblank, vactive, vblank656,
src_decimation, burst, luma_lpf, uv_lpf, comb, sc);
}
/* Sets horizontal blanking delay and active lines */
cx25840_write(client, 0x470, hblank);
cx25840_write(client, 0x471, 0xff&(((hblank>>8)&0x3)|(hactive <<4)));
cx25840_write(client, 0x472, hactive>>4);
/* Sets burst gate delay */
cx25840_write(client, 0x473, burst);
/* Sets vertical blanking delay and active duration */
cx25840_write(client, 0x474, vblank);
cx25840_write(client, 0x475, 0xff&(((vblank>>8)&0x3)|(vactive <<4)));
cx25840_write(client, 0x476, vactive>>4);
cx25840_write(client, 0x477, vblank656);
/* Sets src decimation rate */
cx25840_write(client, 0x478, 0xff&src_decimation);
cx25840_write(client, 0x479, 0xff&(src_decimation>>8));
/* Sets Luma and UV Low pass filters */
cx25840_write(client, 0x47a, luma_lpf<<6|((uv_lpf<<4)&0x30));
/* Enables comb filters */
cx25840_write(client, 0x47b, comb);
/* Sets SC Step*/
cx25840_write(client, 0x47c, sc);
cx25840_write(client, 0x47d, 0xff&sc>>8);
cx25840_write(client, 0x47e, 0xff&sc>>16);
/* Sets VBI parameters */
if (std & V4L2_STD_625_50) {
cx25840_write(client, 0x47f, 0x01);
state->vbi_line_offset = 5;
} else {
cx25840_write(client, 0x47f, 0x00);
state->vbi_line_offset = 8;
}
}
int cx25840_vbi(struct i2c_client *client, unsigned int cmd, void *arg)
{
struct cx25840_state *state = i2c_get_clientdata(client);
......@@ -292,8 +148,8 @@ int cx25840_vbi(struct i2c_client *client, unsigned int cmd, void *arg)
/* raw VBI */
memset(svbi, 0, sizeof(*svbi));
/* Setup VBI */
cx25840_vbi_setup(client);
/* Setup standard */
cx25840_std_setup(client);
/* VBI Offset */
cx25840_write(client, 0x47f, vbi_offset);
......@@ -304,8 +160,8 @@ int cx25840_vbi(struct i2c_client *client, unsigned int cmd, void *arg)
for (x = 0; x <= 23; x++)
lcr[x] = 0x00;
/* Setup VBI */
cx25840_vbi_setup(client);
/* Setup standard */
cx25840_std_setup(client);
/* Sliced VBI */
cx25840_write(client, 0x404, 0x32); /* Ancillary data */
......
Markdown is supported
0% 或 .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑！
想要评论请 注册 或