Merge branch 'fixes-for-3.9' into next/fixes-non-critical

This is a branch of fixes that originally were scheduled for 3.8 but
due to the request from Linus to hold back on all but the most critical
of fixes, we're re-queueing them for 3.9 here.

* fixes-for-3.9:
  ARM: dts: imx6: fix fec ptp clock slow 10 time
  ARM: highbank: mask cluster id from cpu_logical_map
  ARM: scu: mask cluster id from cpu_logical_map
  ARM: scu: add empty scu_enable for !CONFIG_SMP
  ARM: at91/at91sam9x5.dtsi: fix usart3 TXD
  ARM: at91: at91sam9x5: fix usart3 pinctrl name
  ARM: EXYNOS: Fix crash on soft reset on EXYNOS5440
  ARM: dts: fix tick and alarm irq numbers for exynos5440
  ARM: dts: fix compatible value for exynos pinctrl
  ARM: dts: Fix compatible value of pinctrl module on EXYNOS5440
  ARM: S3C24XX: fix uninitialized variable warning
  mfd/vexpress: vexpress_sysreg_setup must not be __init
  ARM: ux500: Fix u9540 booting issues
  arm: mvebu: i2c come back in defconfig
  arm: plat-orion: fix printing of "MPP config unavailable on this hardware"
  Dove: activate GPIO interrupts in DT
  ARM: ux500: add spin_unlock(&master_lock).
  ARM: ux500: Disable Power Supply and Battery Management by default
Signed-off-by: NOlof Johansson <olof@lixom.net>

Documentation/devicetree/bindings/pinctrl/samsung-pinctrl.txt

@@ -7,9 +7,9 @@ on-chip controllers onto these pads.
 
 Required Properties:
 - compatible: should be one of the following.
-  - "samsung,pinctrl-exynos4210": for Exynos4210 compatible pin-controller.
-  - "samsung,pinctrl-exynos4x12": for Exynos4x12 compatible pin-controller.
-  - "samsung,pinctrl-exynos5250": for Exynos5250 compatible pin-controller.
+  - "samsung,exynos4210-pinctrl": for Exynos4210 compatible pin-controller.
+  - "samsung,exynos4x12-pinctrl": for Exynos4x12 compatible pin-controller.
+  - "samsung,exynos5250-pinctrl": for Exynos5250 compatible pin-controller.
 
 - reg: Base address of the pin controller hardware module and length of
   the address space it occupies.
@@ -142,7 +142,7 @@ the following format 'pinctrl{n}' where n is a unique number for the alias.
 Example: A pin-controller node with pin banks:
 
 	pinctrl_0: pinctrl@11400000 {
-		compatible = "samsung,pinctrl-exynos4210";
+		compatible = "samsung,exynos4210-pinctrl";
 		reg = <0x11400000 0x1000>;
 		interrupts = <0 47 0>;
 
@@ -185,7 +185,7 @@ Example: A pin-controller node with pin banks:
 Example 1: A pin-controller node with pin groups.
 
 	pinctrl_0: pinctrl@11400000 {
-		compatible = "samsung,pinctrl-exynos4210";
+		compatible = "samsung,exynos4210-pinctrl";
 		reg = <0x11400000 0x1000>;
 		interrupts = <0 47 0>;
 
@@ -230,7 +230,7 @@ Example 1: A pin-controller node with pin groups.
 Example 2: A pin-controller node with external wakeup interrupt controller node.
 
 	pinctrl_1: pinctrl@11000000 {
-		compatible = "samsung,pinctrl-exynos4210";
+		compatible = "samsung,exynos4210-pinctrl";
 		reg = <0x11000000 0x1000>;
 		interrupts = <0 46 0>
 

arch/arm/boot/dts/at91sam9x5.dtsi

@@ -197,9 +197,9 @@
 				};
 
 				usart3 {
-					pinctrl_uart3: usart3-0 {
+					pinctrl_usart3: usart3-0 {
 						atmel,pins =
-							<2 23 0x2 0x1	/* PC22 periph B with pullup */
+							<2 22 0x2 0x1	/* PC22 periph B with pullup */
 							 2 23 0x2 0x0>;	/* PC23 periph B */
 					};
 

arch/arm/boot/dts/dove.dtsi

@@ -93,6 +93,7 @@
 			reg = <0xd0400 0x20>;
 			ngpios = <32>;
 			interrupt-controller;
+			#interrupt-cells = <2>;
 			interrupts = <12>, <13>, <14>, <60>;
 		};
 
@@ -103,6 +104,7 @@
 			reg = <0xd0420 0x20>;
 			ngpios = <32>;
 			interrupt-controller;
+			#interrupt-cells = <2>;
 			interrupts = <61>;
 		};
 

arch/arm/boot/dts/exynos4210.dtsi

@@ -48,13 +48,13 @@
 	};
 
 	pinctrl_0: pinctrl@11400000 {
-		compatible = "samsung,pinctrl-exynos4210";
+		compatible = "samsung,exynos4210-pinctrl";
 		reg = <0x11400000 0x1000>;
 		interrupts = <0 47 0>;
 	};
 
 	pinctrl_1: pinctrl@11000000 {
-		compatible = "samsung,pinctrl-exynos4210";
+		compatible = "samsung,exynos4210-pinctrl";
 		reg = <0x11000000 0x1000>;
 		interrupts = <0 46 0>;
 
@@ -66,7 +66,7 @@
 	};
 
 	pinctrl_2: pinctrl@03860000 {
-		compatible = "samsung,pinctrl-exynos4210";
+		compatible = "samsung,exynos4210-pinctrl";
 		reg = <0x03860000 0x1000>;
 	};
 

arch/arm/boot/dts/exynos4x12.dtsi

@@ -37,13 +37,13 @@
 	};
 
 	pinctrl_0: pinctrl@11400000 {
-		compatible = "samsung,pinctrl-exynos4x12";
+		compatible = "samsung,exynos4x12-pinctrl";
 		reg = <0x11400000 0x1000>;
 		interrupts = <0 47 0>;
 	};
 
 	pinctrl_1: pinctrl@11000000 {
-		compatible = "samsung,pinctrl-exynos4x12";
+		compatible = "samsung,exynos4x12-pinctrl";
 		reg = <0x11000000 0x1000>;
 		interrupts = <0 46 0>;
 
@@ -55,14 +55,14 @@
 	};
 
 	pinctrl_2: pinctrl@03860000 {
-		compatible = "samsung,pinctrl-exynos4x12";
+		compatible = "samsung,exynos4x12-pinctrl";
 		reg = <0x03860000 0x1000>;
 		interrupt-parent = <&combiner>;
 		interrupts = <10 0>;
 	};
 
 	pinctrl_3: pinctrl@106E0000 {
-		compatible = "samsung,pinctrl-exynos4x12";
+		compatible = "samsung,exynos4x12-pinctrl";
 		reg = <0x106E0000 0x1000>;
 		interrupts = <0 72 0>;
 	};

arch/arm/boot/dts/exynos5440.dtsi

@@ -86,7 +86,7 @@
 	};
 
 	pinctrl {
-		compatible = "samsung,pinctrl-exynos5440";
+		compatible = "samsung,exynos5440-pinctrl";
 		reg = <0xE0000 0x1000>;
 		interrupt-controller;
 		#interrupt-cells = <2>;
@@ -154,6 +154,6 @@
 	rtc {
 		compatible = "samsung,s3c6410-rtc";
 		reg = <0x130000 0x1000>;
-		interrupts = <0 16 0>, <0 17 0>;
+		interrupts = <0 17 0>, <0 16 0>;
 	};
 };

arch/arm/boot/dts/imx6q.dtsi

@@ -866,7 +866,7 @@
 				compatible = "fsl,imx6q-fec";
 				reg = <0x02188000 0x4000>;
 				interrupts = <0 118 0x04 0 119 0x04>;
-				clocks = <&clks 117>, <&clks 117>, <&clks 177>;
+				clocks = <&clks 117>, <&clks 117>, <&clks 190>;
 				clock-names = "ipg", "ahb", "ptp";
 				status = "disabled";
 			};

arch/arm/configs/mvebu_defconfig

@@ -33,6 +33,8 @@ CONFIG_MVNETA=y
 CONFIG_MARVELL_PHY=y
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_I2C=y
+CONFIG_I2C_MV64XXX=y
 CONFIG_SERIAL_8250_DW=y
 CONFIG_GPIOLIB=y
 CONFIG_GPIO_SYSFS=y

arch/arm/configs/u8500_defconfig

@@ -66,9 +66,9 @@ CONFIG_SPI=y
 CONFIG_SPI_PL022=y
 CONFIG_GPIO_STMPE=y
 CONFIG_GPIO_TC3589X=y
-CONFIG_POWER_SUPPLY=y
-CONFIG_AB8500_BM=y
-CONFIG_AB8500_BATTERY_THERM_ON_BATCTRL=y
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_AB8500_BM is not set
+# CONFIG_AB8500_BATTERY_THERM_ON_BATCTRL is not set
 CONFIG_THERMAL=y
 CONFIG_CPU_THERMAL=y
 CONFIG_MFD_STMPE=y

arch/arm/include/asm/smp_scu.h

@@ -7,8 +7,14 @@
 
 #ifndef __ASSEMBLER__
 unsigned int scu_get_core_count(void __iomem *);
-void scu_enable(void __iomem *);
 int scu_power_mode(void __iomem *, unsigned int);
+
+#ifdef CONFIG_SMP
+void scu_enable(void __iomem *scu_base);
+#else
+static inline void scu_enable(void __iomem *scu_base) {}
+#endif
+
 #endif
 
 #endif

arch/arm/kernel/smp_scu.c

@@ -75,7 +75,7 @@ void scu_enable(void __iomem *scu_base)
 int scu_power_mode(void __iomem *scu_base, unsigned int mode)
 {
 	unsigned int val;
-	int cpu = cpu_logical_map(smp_processor_id());
+	int cpu = MPIDR_AFFINITY_LEVEL(cpu_logical_map(smp_processor_id()), 0);
 
 	if (mode > 3 || mode == 1 || cpu > 3)
 		return -EINVAL;

arch/arm/mach-exynos/common.c

@@ -299,6 +299,7 @@ void exynos4_restart(char mode, const char *cmd)
 
 void exynos5_restart(char mode, const char *cmd)
 {
+	struct device_node *np;
 	u32 val;
 	void __iomem *addr;
 
@@ -306,8 +307,9 @@ void exynos5_restart(char mode, const char *cmd)
 		val = 0x1;
 		addr = EXYNOS_SWRESET;
 	} else if (of_machine_is_compatible("samsung,exynos5440")) {
-		val = (0x10 << 20) | (0x1 << 16);
-		addr = EXYNOS5440_SWRESET;
+		np = of_find_compatible_node(NULL, NULL, "samsung,exynos5440-clock");
+		addr = of_iomap(np, 0) + 0xcc;
+		val = (0xfff << 20) | (0x1 << 16);
 	} else {
 		pr_err("%s: cannot support non-DT\n", __func__);
 		return;
@@ -1031,8 +1033,8 @@ static int __init exynos_init_irq_eint(void)
 	 * interrupt support code here can be completely removed.
 	 */
 	static const struct of_device_id exynos_pinctrl_ids[] = {
-		{ .compatible = "samsung,pinctrl-exynos4210", },
-		{ .compatible = "samsung,pinctrl-exynos4x12", },
+		{ .compatible = "samsung,exynos4210-pinctrl", },
+		{ .compatible = "samsung,exynos4x12-pinctrl", },
 	};
 	struct device_node *pctrl_np, *wkup_np;
 	const char *wkup_compat = "samsung,exynos4210-wakeup-eint";

arch/arm/mach-highbank/highbank.c

@@ -28,6 +28,7 @@
 
 #include <asm/arch_timer.h>
 #include <asm/cacheflush.h>
+#include <asm/cputype.h>
 #include <asm/smp_plat.h>
 #include <asm/smp_twd.h>
 #include <asm/hardware/arm_timer.h>
@@ -59,7 +60,7 @@ static void __init highbank_scu_map_io(void)
 
 void highbank_set_cpu_jump(int cpu, void *jump_addr)
 {
-	cpu = cpu_logical_map(cpu);
+	cpu = MPIDR_AFFINITY_LEVEL(cpu_logical_map(cpu), 0);
 	writel(virt_to_phys(jump_addr), HB_JUMP_TABLE_VIRT(cpu));
 	__cpuc_flush_dcache_area(HB_JUMP_TABLE_VIRT(cpu), 16);
 	outer_clean_range(HB_JUMP_TABLE_PHYS(cpu),

arch/arm/mach-highbank/sysregs.h

@@ -37,7 +37,7 @@ extern void __iomem *sregs_base;
 
 static inline void highbank_set_core_pwr(void)
 {
-	int cpu = cpu_logical_map(smp_processor_id());
+	int cpu = MPIDR_AFFINITY_LEVEL(cpu_logical_map(smp_processor_id()), 0);
 	if (scu_base_addr)
 		scu_power_mode(scu_base_addr, SCU_PM_POWEROFF);
 	else
@@ -46,7 +46,7 @@ static inline void highbank_set_core_pwr(void)
 
 static inline void highbank_clear_core_pwr(void)
 {
-	int cpu = cpu_logical_map(smp_processor_id());
+	int cpu = MPIDR_AFFINITY_LEVEL(cpu_logical_map(smp_processor_id()), 0);
 	if (scu_base_addr)
 		scu_power_mode(scu_base_addr, SCU_PM_NORMAL);
 	else

arch/arm/mach-s3c24xx/common.c

@@ -197,7 +197,7 @@ static unsigned long s3c24xx_read_idcode_v4(void)
 
 static void s3c24xx_default_idle(void)
 {
-	unsigned long tmp;
+	unsigned long tmp = 0;
 	int i;
 
 	/* idle the system by using the idle mode which will wait for an

arch/arm/mach-ux500/cpu.c

@@ -71,13 +71,11 @@ void __init ux500_init_irq(void)
 	 * Init clocks here so that they are available for system timer
 	 * initialization.
 	 */
-	if (cpu_is_u8500_family())
+	if (cpu_is_u8500_family() || cpu_is_u9540())
 		db8500_prcmu_early_init();
 
-	if (cpu_is_u8500_family())
+	if (cpu_is_u8500_family() || cpu_is_u9540())
 		u8500_clk_init();
-	else if (cpu_is_u9540())
-		u9540_clk_init();
 	else if (cpu_is_u8540())
 		u8540_clk_init();
 }

arch/arm/mach-ux500/cpuidle.c

@@ -40,8 +40,10 @@ static inline int ux500_enter_idle(struct cpuidle_device *dev,
 			goto wfi;
 
 		/* decouple the gic from the A9 cores */
-		if (prcmu_gic_decouple())
+		if (prcmu_gic_decouple()) {
+			spin_unlock(&master_lock);
 			goto out;
+		}
 
 		/* If an error occur, we will have to recouple the gic
 		 * manually */

arch/arm/plat-orion/mpp.c

@@ -49,7 +49,7 @@ void __init orion_mpp_conf(unsigned int *mpp_list, unsigned int variant_mask,
 					"number (%u)\n", num);
 			continue;
 		}
-		if (variant_mask & !(*mpp_list & variant_mask)) {
+		if (variant_mask && !(*mpp_list & variant_mask)) {
 			printk(KERN_WARNING
 			       "orion_mpp_conf: requested MPP%u config "
 			       "unavailable on this hardware\n", num);

drivers/gpio/gpio-samsung.c

@@ -3023,9 +3023,9 @@ static __init int samsung_gpiolib_init(void)
 	*/
 	struct device_node *pctrl_np;
 	static const struct of_device_id exynos_pinctrl_ids[] = {
-		{ .compatible = "samsung,pinctrl-exynos4210", },
-		{ .compatible = "samsung,pinctrl-exynos4x12", },
-		{ .compatible = "samsung,pinctrl-exynos5440", },
+		{ .compatible = "samsung,exynos4210-pinctrl", },
+		{ .compatible = "samsung,exynos4x12-pinctrl", },
+		{ .compatible = "samsung,exynos5440-pinctrl", },
 	};
 	for_each_matching_node(pctrl_np, exynos_pinctrl_ids)
 		if (pctrl_np && of_device_is_available(pctrl_np))

drivers/mfd/vexpress-sysreg.c

@@ -313,7 +313,7 @@ static void vexpress_sysreg_config_complete(unsigned long data)
 }
 
 
-void __init vexpress_sysreg_setup(struct device_node *node)
+void vexpress_sysreg_setup(struct device_node *node)
 {
 	if (WARN_ON(!vexpress_sysreg_base))
 		return;

drivers/pinctrl/pinctrl-samsung.c

@@ -947,9 +947,9 @@ static int samsung_pinctrl_probe(struct platform_device *pdev)
 }
 
 static const struct of_device_id samsung_pinctrl_dt_match[] = {
-	{ .compatible = "samsung,pinctrl-exynos4210",
+	{ .compatible = "samsung,exynos4210-pinctrl",
 		.data = (void *)exynos4210_pin_ctrl },
-	{ .compatible = "samsung,pinctrl-exynos4x12",
+	{ .compatible = "samsung,exynos4x12-pinctrl",
 		.data = (void *)exynos4x12_pin_ctrl },
 	{},
 };