[MTD] jedec_probe: Fix SST 16-bit chip detection

The unlock_addr rework in kernel 2.6.25 breaks 16-bit SST chips.  SST
39LF160 and SST 39VF1601 are both 16-bit only chip (do not have BYTE#
pin) and new uaddr value is not correct for them.  Add
MTD_UADDR_0xAAAA_0x5555 for those chips.  Tested with SST 39VF1601
chip.
Signed-off-by: NAtsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com>

drivers/mtd/chips/jedec_probe.c

@@ -200,6 +200,7 @@ enum uaddr {
 	MTD_UADDR_0x0555_0x0AAA,
 	MTD_UADDR_0x5555_0x2AAA,
 	MTD_UADDR_0x0AAA_0x0555,
+	MTD_UADDR_0xAAAA_0x5555,
 	MTD_UADDR_DONT_CARE,		/* Requires an arbitrary address */
 	MTD_UADDR_UNNECESSARY,		/* Does not require any address */
 };
@@ -247,6 +248,11 @@ static const struct unlock_addr  unlock_addrs[] = {
 		.addr2 = 0x0555
 	},
 
+	[MTD_UADDR_0xAAAA_0x5555] = {
+		.addr1 = 0xaaaa,
+		.addr2 = 0x5555
+	},
+
 	[MTD_UADDR_DONT_CARE] = {
 		.addr1 = 0x0000,      /* Doesn't matter which address */
 		.addr2 = 0x0000       /* is used - must be last entry */
@@ -1461,8 +1467,8 @@ static const struct amd_flash_info jedec_table[] = {
 		.mfr_id		= MANUFACTURER_SST,     /* should be CFI */
 		.dev_id		= SST39LF160,
 		.name		= "SST 39LF160",
-		.devtypes	= CFI_DEVICETYPE_X16|CFI_DEVICETYPE_X8,
-		.uaddr		= MTD_UADDR_0x5555_0x2AAA,	/* ???? */
+		.devtypes	= CFI_DEVICETYPE_X16,
+		.uaddr		= MTD_UADDR_0xAAAA_0x5555,
 		.dev_size	= SIZE_2MiB,
 		.cmd_set	= P_ID_AMD_STD,
 		.nr_regions	= 2,
@@ -1474,8 +1480,8 @@ static const struct amd_flash_info jedec_table[] = {
 		.mfr_id		= MANUFACTURER_SST,     /* should be CFI */
 		.dev_id		= SST39VF1601,
 		.name		= "SST 39VF1601",
-		.devtypes	= CFI_DEVICETYPE_X16|CFI_DEVICETYPE_X8,
-		.uaddr		= MTD_UADDR_0x5555_0x2AAA,	/* ???? */
+		.devtypes	= CFI_DEVICETYPE_X16,
+		.uaddr		= MTD_UADDR_0xAAAA_0x5555,
 		.dev_size	= SIZE_2MiB,
 		.cmd_set	= P_ID_AMD_STD,
 		.nr_regions	= 2,