提交 ca414698 编写于 作者: J Jarod Wilson 提交者: Mauro Carvalho Chehab

V4L/DVB: IR: add ir-core to lirc userspace decoder bridge driver

v2: copy of buffer data from userspace done inside this plugin/driver,
keeping the actual drivers minimal, and more flexible in what we can
deliver to them later on (they may be fed from within kernelspace later
on, by an in-kernel IR encoder).
Signed-off-by: NJarod Wilson <jarod@redhat.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
上级 4a62a5ab
...@@ -69,6 +69,16 @@ config IR_SONY_DECODER ...@@ -69,6 +69,16 @@ config IR_SONY_DECODER
Enable this option if you have an infrared remote control which Enable this option if you have an infrared remote control which
uses the Sony protocol, and you need software decoding support. uses the Sony protocol, and you need software decoding support.
config IR_LIRC_CODEC
tristate "Enable IR to LIRC bridge"
depends on IR_CORE
depends on LIRC
default y
---help---
Enable this option to pass raw IR to and from userspace via
the LIRC interface.
config IR_IMON config IR_IMON
tristate "SoundGraph iMON Receiver and Display" tristate "SoundGraph iMON Receiver and Display"
depends on USB_ARCH_HAS_HCD depends on USB_ARCH_HAS_HCD
......
...@@ -11,6 +11,7 @@ obj-$(CONFIG_IR_RC5_DECODER) += ir-rc5-decoder.o ...@@ -11,6 +11,7 @@ obj-$(CONFIG_IR_RC5_DECODER) += ir-rc5-decoder.o
obj-$(CONFIG_IR_RC6_DECODER) += ir-rc6-decoder.o obj-$(CONFIG_IR_RC6_DECODER) += ir-rc6-decoder.o
obj-$(CONFIG_IR_JVC_DECODER) += ir-jvc-decoder.o obj-$(CONFIG_IR_JVC_DECODER) += ir-jvc-decoder.o
obj-$(CONFIG_IR_SONY_DECODER) += ir-sony-decoder.o obj-$(CONFIG_IR_SONY_DECODER) += ir-sony-decoder.o
obj-$(CONFIG_IR_LIRC_CODEC) += ir-lirc-codec.o
# stand-alone IR receivers/transmitters # stand-alone IR receivers/transmitters
obj-$(CONFIG_IR_IMON) += imon.o obj-$(CONFIG_IR_IMON) += imon.o
......
...@@ -73,6 +73,11 @@ struct ir_raw_event_ctrl { ...@@ -73,6 +73,11 @@ struct ir_raw_event_ctrl {
bool first; bool first;
bool toggle; bool toggle;
} jvc; } jvc;
struct lirc_codec {
struct ir_input_dev *ir_dev;
struct lirc_driver *drv;
int lircdata;
} lirc;
}; };
/* macros for IR decoders */ /* macros for IR decoders */
...@@ -164,4 +169,12 @@ void ir_raw_init(void); ...@@ -164,4 +169,12 @@ void ir_raw_init(void);
#define load_sony_decode() 0 #define load_sony_decode() 0
#endif #endif
/* from ir-lirc-codec.c */
#ifdef CONFIG_IR_LIRC_CODEC_MODULE
#define load_lirc_codec() request_module("ir-lirc-codec")
#else
#define load_lirc_codec() 0
#endif
#endif /* _IR_RAW_EVENT */ #endif /* _IR_RAW_EVENT */
/* ir-lirc-codec.c - ir-core to classic lirc interface bridge
*
* Copyright (C) 2010 by Jarod Wilson <jarod@redhat.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation version 2 of the License.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
#include <linux/sched.h>
#include <linux/wait.h>
#include <media/lirc.h>
#include <media/ir-core.h>
#include "ir-core-priv.h"
#include "lirc_dev.h"
#define LIRCBUF_SIZE 256
/**
* ir_lirc_decode() - Send raw IR data to lirc_dev to be relayed to the
* lircd userspace daemon for decoding.
* @input_dev: the struct input_dev descriptor of the device
* @duration: the struct ir_raw_event descriptor of the pulse/space
*
* This function returns -EINVAL if the lirc interfaces aren't wired up.
*/
static int ir_lirc_decode(struct input_dev *input_dev, struct ir_raw_event ev)
{
struct ir_input_dev *ir_dev = input_get_drvdata(input_dev);
if (!(ir_dev->raw->enabled_protocols & IR_TYPE_LIRC))
return 0;
if (!ir_dev->raw->lirc.drv || !ir_dev->raw->lirc.drv->rbuf)
return -EINVAL;
IR_dprintk(2, "LIRC data transfer started (%uus %s)\n",
TO_US(ev.duration), TO_STR(ev.pulse));
ir_dev->raw->lirc.lircdata += ev.duration / 1000;
if (ev.pulse)
ir_dev->raw->lirc.lircdata |= PULSE_BIT;
lirc_buffer_write(ir_dev->raw->lirc.drv->rbuf,
(unsigned char *) &ir_dev->raw->lirc.lircdata);
wake_up(&ir_dev->raw->lirc.drv->rbuf->wait_poll);
ir_dev->raw->lirc.lircdata = 0;
return 0;
}
static ssize_t ir_lirc_transmit_ir(struct file *file, const char *buf,
size_t n, loff_t *ppos)
{
struct lirc_codec *lirc;
struct ir_input_dev *ir_dev;
int *txbuf; /* buffer with values to transmit */
int ret = 0, count;
lirc = lirc_get_pdata(file);
if (!lirc)
return -EFAULT;
if (n % sizeof(int))
return -EINVAL;
count = n / sizeof(int);
if (count > LIRCBUF_SIZE || count % 2 == 0)
return -EINVAL;
txbuf = kzalloc(sizeof(int) * LIRCBUF_SIZE, GFP_KERNEL);
if (!txbuf)
return -ENOMEM;
if (copy_from_user(txbuf, buf, n)) {
ret = -EFAULT;
goto out;
}
ir_dev = lirc->ir_dev;
if (!ir_dev) {
ret = -EFAULT;
goto out;
}
if (ir_dev->props && ir_dev->props->tx_ir)
ret = ir_dev->props->tx_ir(ir_dev->props->priv, txbuf, (u32)n);
out:
kfree(txbuf);
return ret;
}
static int ir_lirc_ioctl(struct inode *node, struct file *filep,
unsigned int cmd, unsigned long arg)
{
struct lirc_codec *lirc;
struct ir_input_dev *ir_dev;
int ret = 0;
void *drv_data;
unsigned long val;
lirc = lirc_get_pdata(filep);
if (!lirc)
return -EFAULT;
ir_dev = lirc->ir_dev;
if (!ir_dev || !ir_dev->props || !ir_dev->props->priv)
return -EFAULT;
drv_data = ir_dev->props->priv;
switch (cmd) {
case LIRC_SET_TRANSMITTER_MASK:
ret = get_user(val, (unsigned long *)arg);
if (ret)
return ret;
if (ir_dev->props && ir_dev->props->s_tx_mask)
ret = ir_dev->props->s_tx_mask(drv_data, (u32)val);
else
return -EINVAL;
break;
case LIRC_SET_SEND_CARRIER:
ret = get_user(val, (unsigned long *)arg);
if (ret)
return ret;
if (ir_dev->props && ir_dev->props->s_tx_carrier)
ir_dev->props->s_tx_carrier(drv_data, (u32)val);
else
return -EINVAL;
break;
case LIRC_GET_SEND_MODE:
val = LIRC_CAN_SEND_PULSE & LIRC_CAN_SEND_MASK;
ret = put_user(val, (unsigned long *)arg);
break;
case LIRC_SET_SEND_MODE:
ret = get_user(val, (unsigned long *)arg);
if (ret)
return ret;
if (val != (LIRC_MODE_PULSE & LIRC_CAN_SEND_MASK))
return -EINVAL;
break;
default:
return lirc_dev_fop_ioctl(node, filep, cmd, arg);
}
return ret;
}
static int ir_lirc_open(void *data)
{
return 0;
}
static void ir_lirc_close(void *data)
{
return;
}
static struct file_operations lirc_fops = {
.owner = THIS_MODULE,
.write = ir_lirc_transmit_ir,
.ioctl = ir_lirc_ioctl,
.read = lirc_dev_fop_read,
.poll = lirc_dev_fop_poll,
.open = lirc_dev_fop_open,
.release = lirc_dev_fop_close,
};
static int ir_lirc_register(struct input_dev *input_dev)
{
struct ir_input_dev *ir_dev = input_get_drvdata(input_dev);
struct lirc_driver *drv;
struct lirc_buffer *rbuf;
int rc = -ENOMEM;
unsigned long features;
drv = kzalloc(sizeof(struct lirc_driver), GFP_KERNEL);
if (!drv)
return rc;
rbuf = kzalloc(sizeof(struct lirc_buffer), GFP_KERNEL);
if (!drv)
goto rbuf_alloc_failed;
rc = lirc_buffer_init(rbuf, sizeof(int), LIRCBUF_SIZE);
if (rc)
goto rbuf_init_failed;
features = LIRC_CAN_REC_MODE2;
if (ir_dev->props->tx_ir) {
features |= LIRC_CAN_SEND_PULSE;
if (ir_dev->props->s_tx_mask)
features |= LIRC_CAN_SET_TRANSMITTER_MASK;
if (ir_dev->props->s_tx_carrier)
features |= LIRC_CAN_SET_SEND_CARRIER;
}
snprintf(drv->name, sizeof(drv->name), "ir-lirc-codec (%s)",
ir_dev->driver_name);
drv->minor = -1;
drv->features = features;
drv->data = &ir_dev->raw->lirc;
drv->rbuf = rbuf;
drv->set_use_inc = &ir_lirc_open;
drv->set_use_dec = &ir_lirc_close;
drv->code_length = sizeof(struct ir_raw_event) * 8;
drv->fops = &lirc_fops;
drv->dev = &ir_dev->dev;
drv->owner = THIS_MODULE;
drv->minor = lirc_register_driver(drv);
if (drv->minor < 0) {
rc = -ENODEV;
goto lirc_register_failed;
}
ir_dev->raw->lirc.drv = drv;
ir_dev->raw->lirc.ir_dev = ir_dev;
ir_dev->raw->lirc.lircdata = PULSE_MASK;
return 0;
lirc_register_failed:
rbuf_init_failed:
kfree(rbuf);
rbuf_alloc_failed:
kfree(drv);
return rc;
}
static int ir_lirc_unregister(struct input_dev *input_dev)
{
struct ir_input_dev *ir_dev = input_get_drvdata(input_dev);
struct lirc_codec *lirc = &ir_dev->raw->lirc;
lirc_unregister_driver(lirc->drv->minor);
lirc_buffer_free(lirc->drv->rbuf);
kfree(lirc->drv);
return 0;
}
static struct ir_raw_handler lirc_handler = {
.protocols = IR_TYPE_LIRC,
.decode = ir_lirc_decode,
.raw_register = ir_lirc_register,
.raw_unregister = ir_lirc_unregister,
};
static int __init ir_lirc_codec_init(void)
{
ir_raw_handler_register(&lirc_handler);
printk(KERN_INFO "IR LIRC bridge handler initialized\n");
return 0;
}
static void __exit ir_lirc_codec_exit(void)
{
ir_raw_handler_unregister(&lirc_handler);
}
module_init(ir_lirc_codec_init);
module_exit(ir_lirc_codec_exit);
MODULE_LICENSE("GPL");
MODULE_AUTHOR("Jarod Wilson <jarod@redhat.com>");
MODULE_AUTHOR("Red Hat Inc. (http://www.redhat.com)");
MODULE_DESCRIPTION("LIRC IR handler bridge");
...@@ -253,6 +253,7 @@ static void init_decoders(struct work_struct *work) ...@@ -253,6 +253,7 @@ static void init_decoders(struct work_struct *work)
load_rc6_decode(); load_rc6_decode();
load_jvc_decode(); load_jvc_decode();
load_sony_decode(); load_sony_decode();
load_lirc_codec();
/* If needed, we may later add some init code. In this case, /* If needed, we may later add some init code. In this case,
it is needed to change the CONFIG_MODULE test at ir-core.h it is needed to change the CONFIG_MODULE test at ir-core.h
......
...@@ -43,6 +43,7 @@ static struct { ...@@ -43,6 +43,7 @@ static struct {
{ IR_TYPE_RC6, "rc-6" }, { IR_TYPE_RC6, "rc-6" },
{ IR_TYPE_JVC, "jvc" }, { IR_TYPE_JVC, "jvc" },
{ IR_TYPE_SONY, "sony" }, { IR_TYPE_SONY, "sony" },
{ IR_TYPE_LIRC, "lirc" },
}; };
#define PROTO_NONE "none" #define PROTO_NONE "none"
......
...@@ -17,10 +17,12 @@ ...@@ -17,10 +17,12 @@
#define IR_TYPE_RC6 (1 << 2) /* Philips RC6 protocol */ #define IR_TYPE_RC6 (1 << 2) /* Philips RC6 protocol */
#define IR_TYPE_JVC (1 << 3) /* JVC protocol */ #define IR_TYPE_JVC (1 << 3) /* JVC protocol */
#define IR_TYPE_SONY (1 << 4) /* Sony12/15/20 protocol */ #define IR_TYPE_SONY (1 << 4) /* Sony12/15/20 protocol */
#define IR_TYPE_LIRC (1 << 30) /* Pass raw IR to lirc userspace */
#define IR_TYPE_OTHER (1u << 31) #define IR_TYPE_OTHER (1u << 31)
#define IR_TYPE_ALL (IR_TYPE_RC5 | IR_TYPE_NEC | IR_TYPE_RC6 | \ #define IR_TYPE_ALL (IR_TYPE_RC5 | IR_TYPE_NEC | IR_TYPE_RC6 | \
IR_TYPE_JVC | IR_TYPE_SONY | IR_TYPE_OTHER) IR_TYPE_JVC | IR_TYPE_SONY | IR_TYPE_LIRC | \
IR_TYPE_OTHER)
struct ir_scancode { struct ir_scancode {
u32 scancode; u32 scancode;
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册