bnx2x: 57712 parity handling

- Added support for a parity error handling for a 57712 chip.
 - Changed the parity recovery scheme from per-chip to per-engine.
Signed-off-by: NVladislav Zolotarov <vladz@broadcom.com>
Signed-off-by: NEilon Greenstein <eilong@broadcom.com>
Signed-off-by: NDavid S. Miller <davem@conan.davemloft.net>

drivers/net/bnx2x/bnx2x.h

@@ -733,7 +733,6 @@ struct bnx2x_common {
 
 #define CHIP_METAL(bp)			(bp->common.chip_id & 0x00000ff0)
 #define CHIP_BOND_ID(bp)		(bp->common.chip_id & 0x0000000f)
-#define CHIP_PARITY_ENABLED(bp)	(CHIP_IS_E1(bp) || CHIP_IS_E1H(bp))
 #define CHIP_REV_SIM(bp)		(((CHIP_REV_MASK - CHIP_REV_VAL(bp)) >>\
 					   (CHIP_REV_SHIFT + 1)) \
 						<< CHIP_REV_SHIFT)
@@ -986,11 +985,13 @@ struct hw_context {
 /* forward */
 struct bnx2x_ilt;
 
-typedef enum {
+
+enum bnx2x_recovery_state {
 	BNX2X_RECOVERY_DONE,
 	BNX2X_RECOVERY_INIT,
 	BNX2X_RECOVERY_WAIT,
-} bnx2x_recovery_state_t;
+	BNX2X_RECOVERY_FAILED
+};
 
 /*
  * Event queue (EQ or event ring) MC hsi
@@ -1076,7 +1077,7 @@ struct bnx2x {
 	const struct iro	*iro_arr;
 #define IRO (bp->iro_arr)
 
-	bnx2x_recovery_state_t	recovery_state;
+	enum bnx2x_recovery_state recovery_state;
 	int			is_leader;
 	struct msix_entry	*msix_table;
 
@@ -1800,12 +1801,14 @@ static inline u32 reg_poll(struct bnx2x *bp, u32 reg, u32 expected, int ms,
 				(AEU_INPUTS_ATTN_BITS_TSDM_HW_INTERRUPT | \
 				 AEU_INPUTS_ATTN_BITS_TCM_HW_INTERRUPT | \
 				 AEU_INPUTS_ATTN_BITS_TSEMI_HW_INTERRUPT | \
-				 AEU_INPUTS_ATTN_BITS_PBF_HW_INTERRUPT)
+				 AEU_INPUTS_ATTN_BITS_PBCLIENT_HW_INTERRUPT)
 #define HW_PRTY_ASSERT_SET_0	(AEU_INPUTS_ATTN_BITS_BRB_PARITY_ERROR | \
 				 AEU_INPUTS_ATTN_BITS_PARSER_PARITY_ERROR | \
 				 AEU_INPUTS_ATTN_BITS_TSDM_PARITY_ERROR | \
 				 AEU_INPUTS_ATTN_BITS_SEARCHER_PARITY_ERROR |\
-				 AEU_INPUTS_ATTN_BITS_TSEMI_PARITY_ERROR)
+				 AEU_INPUTS_ATTN_BITS_TSEMI_PARITY_ERROR |\
+				 AEU_INPUTS_ATTN_BITS_TCM_PARITY_ERROR |\
+				 AEU_INPUTS_ATTN_BITS_PBCLIENT_PARITY_ERROR)
 #define HW_INTERRUT_ASSERT_SET_1 \
 				(AEU_INPUTS_ATTN_BITS_QM_HW_INTERRUPT | \
 				 AEU_INPUTS_ATTN_BITS_TIMERS_HW_INTERRUPT | \
@@ -1818,17 +1821,22 @@ static inline u32 reg_poll(struct bnx2x *bp, u32 reg, u32 expected, int ms,
 				 AEU_INPUTS_ATTN_BITS_UPB_HW_INTERRUPT | \
 				 AEU_INPUTS_ATTN_BITS_CSDM_HW_INTERRUPT | \
 				 AEU_INPUTS_ATTN_BITS_CCM_HW_INTERRUPT)
-#define HW_PRTY_ASSERT_SET_1	(AEU_INPUTS_ATTN_BITS_PBCLIENT_PARITY_ERROR |\
+#define HW_PRTY_ASSERT_SET_1	(AEU_INPUTS_ATTN_BITS_PBF_PARITY_ERROR |\
 				 AEU_INPUTS_ATTN_BITS_QM_PARITY_ERROR | \
+				 AEU_INPUTS_ATTN_BITS_TIMERS_PARITY_ERROR |\
 				 AEU_INPUTS_ATTN_BITS_XSDM_PARITY_ERROR | \
+				 AEU_INPUTS_ATTN_BITS_XCM_PARITY_ERROR |\
 				 AEU_INPUTS_ATTN_BITS_XSEMI_PARITY_ERROR | \
 				 AEU_INPUTS_ATTN_BITS_DOORBELLQ_PARITY_ERROR |\
+				 AEU_INPUTS_ATTN_BITS_NIG_PARITY_ERROR |\
 			     AEU_INPUTS_ATTN_BITS_VAUX_PCI_CORE_PARITY_ERROR |\
 				 AEU_INPUTS_ATTN_BITS_DEBUG_PARITY_ERROR | \
 				 AEU_INPUTS_ATTN_BITS_USDM_PARITY_ERROR | \
+				 AEU_INPUTS_ATTN_BITS_UCM_PARITY_ERROR |\
 				 AEU_INPUTS_ATTN_BITS_USEMI_PARITY_ERROR | \
 				 AEU_INPUTS_ATTN_BITS_UPB_PARITY_ERROR | \
-				 AEU_INPUTS_ATTN_BITS_CSDM_PARITY_ERROR)
+				 AEU_INPUTS_ATTN_BITS_CSDM_PARITY_ERROR |\
+				 AEU_INPUTS_ATTN_BITS_CCM_PARITY_ERROR)
 #define HW_INTERRUT_ASSERT_SET_2 \
 				(AEU_INPUTS_ATTN_BITS_CSEMI_HW_INTERRUPT | \
 				 AEU_INPUTS_ATTN_BITS_CDU_HW_INTERRUPT | \
@@ -1840,6 +1848,7 @@ static inline u32 reg_poll(struct bnx2x *bp, u32 reg, u32 expected, int ms,
 			AEU_INPUTS_ATTN_BITS_PXPPCICLOCKCLIENT_PARITY_ERROR |\
 				 AEU_INPUTS_ATTN_BITS_CFC_PARITY_ERROR | \
 				 AEU_INPUTS_ATTN_BITS_CDU_PARITY_ERROR | \
+				 AEU_INPUTS_ATTN_BITS_DMAE_PARITY_ERROR |\
 				 AEU_INPUTS_ATTN_BITS_IGU_PARITY_ERROR | \
 				 AEU_INPUTS_ATTN_BITS_MISC_PARITY_ERROR)
 

drivers/net/bnx2x/bnx2x_cmn.c

@@ -1918,13 +1918,23 @@ int bnx2x_nic_load(struct bnx2x *bp, int load_mode)
 int bnx2x_nic_unload(struct bnx2x *bp, int unload_mode)
 {
 	int i;
-
-	if (bp->state == BNX2X_STATE_CLOSED) {
-		/* Interface has been removed - nothing to recover */
+	bool global = false;
+
+	if ((bp->state == BNX2X_STATE_CLOSED) ||
+	    (bp->state == BNX2X_STATE_ERROR)) {
+		/* We can get here if the driver has been unloaded
+		 * during parity error recovery and is either waiting for a
+		 * leader to complete or for other functions to unload and
+		 * then ifdown has been issued. In this case we want to
+		 * unload and let other functions to complete a recovery
+		 * process.
+		 */
 		bp->recovery_state = BNX2X_RECOVERY_DONE;
 		bp->is_leader = 0;
-		bnx2x_release_hw_lock(bp, HW_LOCK_RESOURCE_RESERVED_08);
-		smp_wmb();
+		bnx2x_release_leader_lock(bp);
+		smp_mb();
+
+		DP(NETIF_MSG_HW, "Releasing a leadership...\n");
 
 		return -EINVAL;
 	}
@@ -1953,11 +1963,27 @@ int bnx2x_nic_unload(struct bnx2x *bp, int unload_mode)
 	if (unload_mode != UNLOAD_RECOVERY)
 		bnx2x_chip_cleanup(bp, unload_mode);
 	else {
-		/* Disable HW interrupts, NAPI and Tx */
+		/* Send the UNLOAD_REQUEST to the MCP */
+		bnx2x_send_unload_req(bp, unload_mode);
+
+		/*
+		 * Prevent transactions to host from the functions on the
+		 * engine that doesn't reset global blocks in case of global
+		 * attention once gloabl blocks are reset and gates are opened
+		 * (the engine which leader will perform the recovery
+		 * last).
+		 */
+		if (!CHIP_IS_E1x(bp))
+			bnx2x_pf_disable(bp);
+
+		/* Disable HW interrupts, NAPI */
 		bnx2x_netif_stop(bp, 1);
 
 		/* Release IRQs */
 		bnx2x_free_irq(bp);
+
+		/* Report UNLOAD_DONE to MCP */
+		bnx2x_send_unload_done(bp);
 	}
 
 	/*
@@ -1977,17 +2003,24 @@ int bnx2x_nic_unload(struct bnx2x *bp, int unload_mode)
 
 	bp->state = BNX2X_STATE_CLOSED;
 
+	/* Check if there are pending parity attentions. If there are - set
+	 * RECOVERY_IN_PROGRESS.
+	 */
+	if (bnx2x_chk_parity_attn(bp, &global, false)) {
+		bnx2x_set_reset_in_progress(bp);
+
+		/* Set RESET_IS_GLOBAL if needed */
+		if (global)
+			bnx2x_set_reset_global(bp);
+	}
+
+
 	/* The last driver must disable a "close the gate" if there is no
 	 * parity attention or "process kill" pending.
 	 */
-	if ((!bnx2x_dec_load_cnt(bp)) && (!bnx2x_chk_parity_attn(bp)) &&
-	    bnx2x_reset_is_done(bp))
+	if (!bnx2x_dec_load_cnt(bp) && bnx2x_reset_is_done(bp, BP_PATH(bp)))
 		bnx2x_disable_close_the_gate(bp);
 
-	/* Reset MCP mail box sequence if there is on going recovery */
-	if (unload_mode == UNLOAD_RECOVERY)
-		bp->fw_seq = 0;
-
 	return 0;
 }
 

drivers/net/bnx2x/bnx2x_cmn.h

@@ -181,6 +181,9 @@ void bnx2x_drv_pulse(struct bnx2x *bp);
 void bnx2x_igu_ack_sb(struct bnx2x *bp, u8 igu_sb_id, u8 segment,
 		      u16 index, u8 op, u8 update);
 
+/* Disable transactions from chip to host */
+void bnx2x_pf_disable(struct bnx2x *bp);
+
 /**
  * bnx2x__link_status_update - handles link status change.
  *
@@ -320,6 +323,13 @@ int bnx2x_acquire_hw_lock(struct bnx2x *bp, u32 resource);
  */
 int bnx2x_release_hw_lock(struct bnx2x *bp, u32 resource);
 
+/**
+ * bnx2x_release_leader_lock - release recovery leader lock
+ *
+ * @bp:		driver handle
+ */
+int bnx2x_release_leader_lock(struct bnx2x *bp);
+
 /**
  * bnx2x_set_eth_mac - configure eth MAC address in the HW
  *
@@ -370,8 +380,10 @@ void bnx2x_set_q_rx_mode(struct bnx2x *bp, u8 cl_id,
 /* Parity errors related */
 void bnx2x_inc_load_cnt(struct bnx2x *bp);
 u32 bnx2x_dec_load_cnt(struct bnx2x *bp);
-bool bnx2x_chk_parity_attn(struct bnx2x *bp);
-bool bnx2x_reset_is_done(struct bnx2x *bp);
+bool bnx2x_chk_parity_attn(struct bnx2x *bp, bool *global, bool print);
+bool bnx2x_reset_is_done(struct bnx2x *bp, int engine);
+void bnx2x_set_reset_in_progress(struct bnx2x *bp);
+void bnx2x_set_reset_global(struct bnx2x *bp);
 void bnx2x_disable_close_the_gate(struct bnx2x *bp);
 
 /**

drivers/net/bnx2x/bnx2x_ethtool.c

@@ -634,8 +634,7 @@ static void bnx2x_get_regs(struct net_device *dev,
 	}
 	/* Re-enable parity attentions */
 	bnx2x_clear_blocks_parity(bp);
-	if (CHIP_PARITY_ENABLED(bp))
-		bnx2x_enable_blocks_parity(bp);
+	bnx2x_enable_blocks_parity(bp);
 }
 
 static void bnx2x_get_drvinfo(struct net_device *dev,

drivers/net/bnx2x/bnx2x_init.h

@@ -377,12 +377,15 @@ static const struct {
 	BLOCK_PRTY_INFO_0(PXP2,	0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff),
 	BLOCK_PRTY_INFO_1(PXP2,	0x7ff, 0x7f, 0x7f, 0x7ff),
 	BLOCK_PRTY_INFO(HC, 0x7, 0x7, 0x7, 0),
+	BLOCK_PRTY_INFO(NIG, 0xffffffff, 0x3fffffff, 0xffffffff, 0),
+	BLOCK_PRTY_INFO_0(NIG,	0xffffffff, 0, 0, 0xffffffff),
+	BLOCK_PRTY_INFO_1(NIG,	0xffff, 0, 0, 0xffff),
 	BLOCK_PRTY_INFO(IGU, 0x7ff, 0, 0, 0x7ff),
 	BLOCK_PRTY_INFO(MISC, 0x1, 0x1, 0x1, 0x1),
 	BLOCK_PRTY_INFO(QM, 0, 0x1ff, 0xfff, 0xfff),
 	BLOCK_PRTY_INFO(DORQ, 0, 0x3, 0x3, 0x3),
 	{GRCBASE_UPB + PB_REG_PB_PRTY_MASK,
-		GRCBASE_UPB + PB_REG_PB_PRTY_STS_CLR, 0,
+		GRCBASE_UPB + PB_REG_PB_PRTY_STS_CLR, 0xf,
 		{0xf, 0xf, 0xf}, "UPB"},
 	{GRCBASE_XPB + PB_REG_PB_PRTY_MASK,
 		GRCBASE_XPB + PB_REG_PB_PRTY_STS_CLR, 0,
@@ -394,10 +397,16 @@ static const struct {
 	BLOCK_PRTY_INFO(DMAE, 0, 0xf, 0xf, 0xf),
 	BLOCK_PRTY_INFO(BRB1, 0, 0xf, 0xf, 0xf),
 	BLOCK_PRTY_INFO(PRS, (1<<6), 0xff, 0xff, 0xff),
+	BLOCK_PRTY_INFO(PBF, 0, 0, 0x3ffff, 0xfffffff),
+	BLOCK_PRTY_INFO(TM, 0, 0, 0x7f, 0x7f),
 	BLOCK_PRTY_INFO(TSDM, 0x18, 0x7ff, 0x7ff, 0x7ff),
 	BLOCK_PRTY_INFO(CSDM, 0x8, 0x7ff, 0x7ff, 0x7ff),
 	BLOCK_PRTY_INFO(USDM, 0x38, 0x7ff, 0x7ff, 0x7ff),
 	BLOCK_PRTY_INFO(XSDM, 0x8, 0x7ff, 0x7ff, 0x7ff),
+	BLOCK_PRTY_INFO(TCM, 0, 0, 0x7ffffff, 0x7ffffff),
+	BLOCK_PRTY_INFO(CCM, 0, 0, 0x7ffffff, 0x7ffffff),
+	BLOCK_PRTY_INFO(UCM, 0, 0, 0x7ffffff, 0x7ffffff),
+	BLOCK_PRTY_INFO(XCM, 0, 0, 0x3fffffff, 0x3fffffff),
 	BLOCK_PRTY_INFO_0(TSEM, 0, 0xffffffff, 0xffffffff, 0xffffffff),
 	BLOCK_PRTY_INFO_1(TSEM, 0, 0x3, 0x1f, 0x3f),
 	BLOCK_PRTY_INFO_0(USEM, 0, 0xffffffff, 0xffffffff, 0xffffffff),

drivers/net/bnx2x/bnx2x_reg.h

@@ -804,10 +804,12 @@
 /* [RW 28] TCM Header when both ULP and TCP context is loaded. */
 #define DORQ_REG_SHRT_CMHEAD					 0x170054
 #define HC_CONFIG_0_REG_ATTN_BIT_EN_0				 (0x1<<4)
+#define HC_CONFIG_0_REG_BLOCK_DISABLE_0				 (0x1<<0)
 #define HC_CONFIG_0_REG_INT_LINE_EN_0				 (0x1<<3)
 #define HC_CONFIG_0_REG_MSI_ATTN_EN_0				 (0x1<<7)
 #define HC_CONFIG_0_REG_MSI_MSIX_INT_EN_0			 (0x1<<2)
-#define HC_CONFIG_0_REG_SINGLE_ISR_EN_0 			 (0x1<<1)
+#define HC_CONFIG_0_REG_SINGLE_ISR_EN_0				 (0x1<<1)
+#define HC_CONFIG_1_REG_BLOCK_DISABLE_1				 (0x1<<0)
 #define HC_REG_AGG_INT_0					 0x108050
 #define HC_REG_AGG_INT_1					 0x108054
 #define HC_REG_ATTN_BIT 					 0x108120
@@ -846,6 +848,7 @@
 #define HC_REG_VQID_0						 0x108008
 #define HC_REG_VQID_1						 0x10800c
 #define IGU_BLOCK_CONFIGURATION_REG_BACKWARD_COMP_EN		 (0x1<<1)
+#define IGU_BLOCK_CONFIGURATION_REG_BLOCK_ENABLE		 (0x1<<0)
 #define IGU_REG_ATTENTION_ACK_BITS				 0x130108
 /* [R 4] Debug: attn_fsm */
 #define IGU_REG_ATTN_FSM					 0x130054
@@ -1876,11 +1879,21 @@
 /* [R 32] Interrupt register #0 read */
 #define NIG_REG_NIG_INT_STS_0					 0x103b0
 #define NIG_REG_NIG_INT_STS_1					 0x103c0
+/* [R 32] Legacy E1 and E1H location for parity error mask register. */
+#define NIG_REG_NIG_PRTY_MASK					 0x103dc
+/* [RW 32] Parity mask register #0 read/write */
+#define NIG_REG_NIG_PRTY_MASK_0					 0x183c8
+#define NIG_REG_NIG_PRTY_MASK_1					 0x183d8
 /* [R 32] Legacy E1 and E1H location for parity error status register. */
 #define NIG_REG_NIG_PRTY_STS					 0x103d0
 /* [R 32] Parity register #0 read */
 #define NIG_REG_NIG_PRTY_STS_0					 0x183bc
 #define NIG_REG_NIG_PRTY_STS_1					 0x183cc
+/* [R 32] Legacy E1 and E1H location for parity error status clear register. */
+#define NIG_REG_NIG_PRTY_STS_CLR				 0x103d4
+/* [RC 32] Parity register #0 read clear */
+#define NIG_REG_NIG_PRTY_STS_CLR_0				 0x183c0
+#define NIG_REG_NIG_PRTY_STS_CLR_1				 0x183d0
 /* [RW 6] Bit-map indicating which L2 hdrs may appear after the basic
  * Ethernet header. */
 #define NIG_REG_P0_HDRS_AFTER_BASIC				 0x18038
@@ -4322,6 +4335,8 @@
 #define UCM_REG_UCM_INT_MASK					 0xe01d4
 /* [R 11] Interrupt register #0 read */
 #define UCM_REG_UCM_INT_STS					 0xe01c8
+/* [RW 27] Parity mask register #0 read/write */
+#define UCM_REG_UCM_PRTY_MASK					 0xe01e4
 /* [R 27] Parity register #0 read */
 #define UCM_REG_UCM_PRTY_STS					 0xe01d8
 /* [RC 27] Parity register #0 read clear */
@@ -4843,8 +4858,13 @@
 #define XCM_REG_XCM_INT_MASK					 0x202b4
 /* [R 14] Interrupt register #0 read */
 #define XCM_REG_XCM_INT_STS					 0x202a8
+/* [RW 30] Parity mask register #0 read/write */
+#define XCM_REG_XCM_PRTY_MASK					 0x202c4
 /* [R 30] Parity register #0 read */
 #define XCM_REG_XCM_PRTY_STS					 0x202b8
+/* [RC 30] Parity register #0 read clear */
+#define XCM_REG_XCM_PRTY_STS_CLR				 0x202bc
+
 /* [RW 4] The size of AG context region 0 in REG-pairs. Designates the MS
    REG-pair number (e.g. if region 0 is 6 REG-pairs; the value should be 5).
    Is used to determine the number of the AG context REG-pairs written back;
@@ -5284,9 +5304,12 @@
 #define MISC_REGISTERS_RESET_REG_2_RST_EMAC1_HARD_CORE		 (0x1<<15)
 #define MISC_REGISTERS_RESET_REG_2_RST_GRC			 (0x1<<4)
 #define MISC_REGISTERS_RESET_REG_2_RST_MCP_N_HARD_CORE_RST_B	 (0x1<<6)
+#define MISC_REGISTERS_RESET_REG_2_RST_MCP_N_RESET_CMN_CORE	 (0x1<<8)
+#define MISC_REGISTERS_RESET_REG_2_RST_MCP_N_RESET_CMN_CPU	 (0x1<<7)
 #define MISC_REGISTERS_RESET_REG_2_RST_MCP_N_RESET_REG_HARD_CORE (0x1<<5)
 #define MISC_REGISTERS_RESET_REG_2_RST_MDIO			 (0x1<<13)
 #define MISC_REGISTERS_RESET_REG_2_RST_MISC_CORE		 (0x1<<11)
+#define MISC_REGISTERS_RESET_REG_2_RST_PCI_MDIO			 (0x1<<13)
 #define MISC_REGISTERS_RESET_REG_2_RST_RBCN			 (0x1<<9)
 #define MISC_REGISTERS_RESET_REG_2_SET				 0x594
 #define MISC_REGISTERS_RESET_REG_3_CLEAR			 0x5a8
@@ -5315,71 +5338,82 @@
 #define HW_LOCK_MAX_RESOURCE_VALUE				 31
 #define HW_LOCK_RESOURCE_GPIO					 1
 #define HW_LOCK_RESOURCE_MDIO					 0
-#define HW_LOCK_RESOURCE_PORT0_ATT_MASK 			 3
-#define HW_LOCK_RESOURCE_RESERVED_08				 8
+#define HW_LOCK_RESOURCE_PORT0_ATT_MASK				 3
+#define HW_LOCK_RESOURCE_RECOVERY_LEADER_0			 8
+#define HW_LOCK_RESOURCE_RECOVERY_LEADER_1			 9
 #define HW_LOCK_RESOURCE_SPIO					 2
 #define HW_LOCK_RESOURCE_UNDI					 5
-#define AEU_INPUTS_ATTN_BITS_ATC_HW_INTERRUPT		      (0x1<<4)
-#define AEU_INPUTS_ATTN_BITS_ATC_PARITY_ERROR		      (0x1<<5)
-#define AEU_INPUTS_ATTN_BITS_BRB_PARITY_ERROR		      (1<<18)
-#define AEU_INPUTS_ATTN_BITS_CCM_HW_INTERRUPT		      (1<<31)
-#define AEU_INPUTS_ATTN_BITS_CDU_HW_INTERRUPT		      (1<<9)
-#define AEU_INPUTS_ATTN_BITS_CDU_PARITY_ERROR		      (1<<8)
-#define AEU_INPUTS_ATTN_BITS_CFC_HW_INTERRUPT		      (1<<7)
-#define AEU_INPUTS_ATTN_BITS_CFC_PARITY_ERROR		      (1<<6)
-#define AEU_INPUTS_ATTN_BITS_CSDM_HW_INTERRUPT		      (1<<29)
-#define AEU_INPUTS_ATTN_BITS_CSDM_PARITY_ERROR		      (1<<28)
-#define AEU_INPUTS_ATTN_BITS_CSEMI_HW_INTERRUPT 	      (1<<1)
-#define AEU_INPUTS_ATTN_BITS_CSEMI_PARITY_ERROR 	      (1<<0)
-#define AEU_INPUTS_ATTN_BITS_DEBUG_PARITY_ERROR 	      (1<<18)
-#define AEU_INPUTS_ATTN_BITS_DMAE_HW_INTERRUPT		      (1<<11)
-#define AEU_INPUTS_ATTN_BITS_DOORBELLQ_HW_INTERRUPT	      (1<<13)
-#define AEU_INPUTS_ATTN_BITS_DOORBELLQ_PARITY_ERROR	      (1<<12)
-#define AEU_INPUTS_ATTN_BITS_GPIO0_FUNCTION_0		      (1<<2)
-#define AEU_INPUTS_ATTN_BITS_GPIO3_FUNCTION_0		      (1<<5)
-#define AEU_INPUTS_ATTN_BITS_GPIO3_FUNCTION_1		      (1<<9)
-#define AEU_INPUTS_ATTN_BITS_IGU_PARITY_ERROR		      (1<<12)
-#define AEU_INPUTS_ATTN_BITS_MCP_LATCHED_ROM_PARITY	      (1<<28)
-#define AEU_INPUTS_ATTN_BITS_MCP_LATCHED_SCPAD_PARITY	      (1<<31)
-#define AEU_INPUTS_ATTN_BITS_MCP_LATCHED_UMP_RX_PARITY	      (1<<29)
-#define AEU_INPUTS_ATTN_BITS_MCP_LATCHED_UMP_TX_PARITY	      (1<<30)
-#define AEU_INPUTS_ATTN_BITS_MISC_HW_INTERRUPT		      (1<<15)
-#define AEU_INPUTS_ATTN_BITS_MISC_PARITY_ERROR		      (1<<14)
-#define AEU_INPUTS_ATTN_BITS_PARSER_PARITY_ERROR	      (1<<20)
-#define AEU_INPUTS_ATTN_BITS_PBCLIENT_PARITY_ERROR	      (1<<0)
-#define AEU_INPUTS_ATTN_BITS_PBF_HW_INTERRUPT		      (1<<31)
-#define AEU_INPUTS_ATTN_BITS_PGLUE_HW_INTERRUPT	      (0x1<<2)
-#define AEU_INPUTS_ATTN_BITS_PGLUE_PARITY_ERROR	      (0x1<<3)
-#define AEU_INPUTS_ATTN_BITS_PXP_HW_INTERRUPT		      (1<<3)
-#define AEU_INPUTS_ATTN_BITS_PXP_PARITY_ERROR		      (1<<2)
-#define AEU_INPUTS_ATTN_BITS_PXPPCICLOCKCLIENT_HW_INTERRUPT   (1<<5)
-#define AEU_INPUTS_ATTN_BITS_PXPPCICLOCKCLIENT_PARITY_ERROR   (1<<4)
-#define AEU_INPUTS_ATTN_BITS_QM_HW_INTERRUPT		      (1<<3)
-#define AEU_INPUTS_ATTN_BITS_QM_PARITY_ERROR		      (1<<2)
-#define AEU_INPUTS_ATTN_BITS_SEARCHER_PARITY_ERROR	      (1<<22)
-#define AEU_INPUTS_ATTN_BITS_SPIO5			      (1<<15)
-#define AEU_INPUTS_ATTN_BITS_TCM_HW_INTERRUPT		      (1<<27)
-#define AEU_INPUTS_ATTN_BITS_TIMERS_HW_INTERRUPT	      (1<<5)
-#define AEU_INPUTS_ATTN_BITS_TSDM_HW_INTERRUPT		      (1<<25)
-#define AEU_INPUTS_ATTN_BITS_TSDM_PARITY_ERROR		      (1<<24)
-#define AEU_INPUTS_ATTN_BITS_TSEMI_HW_INTERRUPT 	      (1<<29)
-#define AEU_INPUTS_ATTN_BITS_TSEMI_PARITY_ERROR 	      (1<<28)
-#define AEU_INPUTS_ATTN_BITS_UCM_HW_INTERRUPT		      (1<<23)
-#define AEU_INPUTS_ATTN_BITS_UPB_HW_INTERRUPT		      (1<<27)
-#define AEU_INPUTS_ATTN_BITS_UPB_PARITY_ERROR		      (1<<26)
-#define AEU_INPUTS_ATTN_BITS_USDM_HW_INTERRUPT		      (1<<21)
-#define AEU_INPUTS_ATTN_BITS_USDM_PARITY_ERROR		      (1<<20)
-#define AEU_INPUTS_ATTN_BITS_USEMI_HW_INTERRUPT 	      (1<<25)
-#define AEU_INPUTS_ATTN_BITS_USEMI_PARITY_ERROR 	      (1<<24)
-#define AEU_INPUTS_ATTN_BITS_VAUX_PCI_CORE_PARITY_ERROR       (1<<16)
-#define AEU_INPUTS_ATTN_BITS_XCM_HW_INTERRUPT		      (1<<9)
-#define AEU_INPUTS_ATTN_BITS_XSDM_HW_INTERRUPT		      (1<<7)
-#define AEU_INPUTS_ATTN_BITS_XSDM_PARITY_ERROR		      (1<<6)
-#define AEU_INPUTS_ATTN_BITS_XSEMI_HW_INTERRUPT 	      (1<<11)
-#define AEU_INPUTS_ATTN_BITS_XSEMI_PARITY_ERROR 	      (1<<10)
+#define AEU_INPUTS_ATTN_BITS_ATC_HW_INTERRUPT			 (0x1<<4)
+#define AEU_INPUTS_ATTN_BITS_ATC_PARITY_ERROR			 (0x1<<5)
+#define AEU_INPUTS_ATTN_BITS_BRB_PARITY_ERROR			 (0x1<<18)
+#define AEU_INPUTS_ATTN_BITS_CCM_HW_INTERRUPT			 (0x1<<31)
+#define AEU_INPUTS_ATTN_BITS_CCM_PARITY_ERROR			 (0x1<<30)
+#define AEU_INPUTS_ATTN_BITS_CDU_HW_INTERRUPT			 (0x1<<9)
+#define AEU_INPUTS_ATTN_BITS_CDU_PARITY_ERROR			 (0x1<<8)
+#define AEU_INPUTS_ATTN_BITS_CFC_HW_INTERRUPT			 (0x1<<7)
+#define AEU_INPUTS_ATTN_BITS_CFC_PARITY_ERROR			 (0x1<<6)
+#define AEU_INPUTS_ATTN_BITS_CSDM_HW_INTERRUPT			 (0x1<<29)
+#define AEU_INPUTS_ATTN_BITS_CSDM_PARITY_ERROR			 (0x1<<28)
+#define AEU_INPUTS_ATTN_BITS_CSEMI_HW_INTERRUPT			 (0x1<<1)
+#define AEU_INPUTS_ATTN_BITS_CSEMI_PARITY_ERROR			 (0x1<<0)
+#define AEU_INPUTS_ATTN_BITS_DEBUG_PARITY_ERROR			 (0x1<<18)
+#define AEU_INPUTS_ATTN_BITS_DMAE_HW_INTERRUPT			 (0x1<<11)
+#define AEU_INPUTS_ATTN_BITS_DMAE_PARITY_ERROR			 (0x1<<10)
+#define AEU_INPUTS_ATTN_BITS_DOORBELLQ_HW_INTERRUPT		 (0x1<<13)
+#define AEU_INPUTS_ATTN_BITS_DOORBELLQ_PARITY_ERROR		 (0x1<<12)
+#define AEU_INPUTS_ATTN_BITS_GPIO0_FUNCTION_0			 (0x1<<2)
+#define AEU_INPUTS_ATTN_BITS_IGU_PARITY_ERROR			 (0x1<<12)
+#define AEU_INPUTS_ATTN_BITS_MCP_LATCHED_ROM_PARITY		 (0x1<<28)
+#define AEU_INPUTS_ATTN_BITS_MCP_LATCHED_SCPAD_PARITY		 (0x1<<31)
+#define AEU_INPUTS_ATTN_BITS_MCP_LATCHED_UMP_RX_PARITY		 (0x1<<29)
+#define AEU_INPUTS_ATTN_BITS_MCP_LATCHED_UMP_TX_PARITY		 (0x1<<30)
+#define AEU_INPUTS_ATTN_BITS_MISC_HW_INTERRUPT			 (0x1<<15)
+#define AEU_INPUTS_ATTN_BITS_MISC_PARITY_ERROR			 (0x1<<14)
+#define AEU_INPUTS_ATTN_BITS_NIG_PARITY_ERROR			 (0x1<<14)
+#define AEU_INPUTS_ATTN_BITS_PARSER_PARITY_ERROR		 (0x1<<20)
+#define AEU_INPUTS_ATTN_BITS_PBCLIENT_HW_INTERRUPT		 (0x1<<31)
+#define AEU_INPUTS_ATTN_BITS_PBCLIENT_PARITY_ERROR		 (0x1<<30)
+#define AEU_INPUTS_ATTN_BITS_PBF_PARITY_ERROR			 (0x1<<0)
+#define AEU_INPUTS_ATTN_BITS_PGLUE_HW_INTERRUPT			 (0x1<<2)
+#define AEU_INPUTS_ATTN_BITS_PGLUE_PARITY_ERROR			 (0x1<<3)
+#define AEU_INPUTS_ATTN_BITS_PXPPCICLOCKCLIENT_HW_INTERRUPT	 (0x1<<5)
+#define AEU_INPUTS_ATTN_BITS_PXPPCICLOCKCLIENT_PARITY_ERROR	 (0x1<<4)
+#define AEU_INPUTS_ATTN_BITS_PXP_HW_INTERRUPT			 (0x1<<3)
+#define AEU_INPUTS_ATTN_BITS_PXP_PARITY_ERROR			 (0x1<<2)
+#define AEU_INPUTS_ATTN_BITS_QM_HW_INTERRUPT			 (0x1<<3)
+#define AEU_INPUTS_ATTN_BITS_QM_PARITY_ERROR			 (0x1<<2)
+#define AEU_INPUTS_ATTN_BITS_SEARCHER_PARITY_ERROR		 (0x1<<22)
+#define AEU_INPUTS_ATTN_BITS_SPIO5				 (0x1<<15)
+#define AEU_INPUTS_ATTN_BITS_TCM_HW_INTERRUPT			 (0x1<<27)
+#define AEU_INPUTS_ATTN_BITS_TCM_PARITY_ERROR			 (0x1<<26)
+#define AEU_INPUTS_ATTN_BITS_TIMERS_HW_INTERRUPT		 (0x1<<5)
+#define AEU_INPUTS_ATTN_BITS_TIMERS_PARITY_ERROR		 (0x1<<4)
+#define AEU_INPUTS_ATTN_BITS_TSDM_HW_INTERRUPT			 (0x1<<25)
+#define AEU_INPUTS_ATTN_BITS_TSDM_PARITY_ERROR			 (0x1<<24)
+#define AEU_INPUTS_ATTN_BITS_TSEMI_HW_INTERRUPT			 (0x1<<29)
+#define AEU_INPUTS_ATTN_BITS_TSEMI_PARITY_ERROR			 (0x1<<28)
+#define AEU_INPUTS_ATTN_BITS_UCM_HW_INTERRUPT			 (0x1<<23)
+#define AEU_INPUTS_ATTN_BITS_UCM_PARITY_ERROR			 (0x1<<22)
+#define AEU_INPUTS_ATTN_BITS_UPB_HW_INTERRUPT			 (0x1<<27)
+#define AEU_INPUTS_ATTN_BITS_UPB_PARITY_ERROR			 (0x1<<26)
+#define AEU_INPUTS_ATTN_BITS_USDM_HW_INTERRUPT			 (0x1<<21)
+#define AEU_INPUTS_ATTN_BITS_USDM_PARITY_ERROR			 (0x1<<20)
+#define AEU_INPUTS_ATTN_BITS_USEMI_HW_INTERRUPT			 (0x1<<25)
+#define AEU_INPUTS_ATTN_BITS_USEMI_PARITY_ERROR			 (0x1<<24)
+#define AEU_INPUTS_ATTN_BITS_VAUX_PCI_CORE_PARITY_ERROR		 (0x1<<16)
+#define AEU_INPUTS_ATTN_BITS_XCM_HW_INTERRUPT			 (0x1<<9)
+#define AEU_INPUTS_ATTN_BITS_XCM_PARITY_ERROR			 (0x1<<8)
+#define AEU_INPUTS_ATTN_BITS_XSDM_HW_INTERRUPT			 (0x1<<7)
+#define AEU_INPUTS_ATTN_BITS_XSDM_PARITY_ERROR			 (0x1<<6)
+#define AEU_INPUTS_ATTN_BITS_XSEMI_HW_INTERRUPT			 (0x1<<11)
+#define AEU_INPUTS_ATTN_BITS_XSEMI_PARITY_ERROR			 (0x1<<10)
+
+#define AEU_INPUTS_ATTN_BITS_GPIO3_FUNCTION_0			(0x1<<5)
+#define AEU_INPUTS_ATTN_BITS_GPIO3_FUNCTION_1			(0x1<<9)
+
 #define RESERVED_GENERAL_ATTENTION_BIT_0	0
 
-#define EVEREST_GEN_ATTN_IN_USE_MASK		0x3ffe0
+#define EVEREST_GEN_ATTN_IN_USE_MASK		0x7ffe0
 #define EVEREST_LATCHED_ATTN_IN_USE_MASK	0xffe00000
 
 #define RESERVED_GENERAL_ATTENTION_BIT_6	6