[PATCH] Condense output of show_free_areas()

On larger systems, the amount of output dumped on the console when you do
SysRq-M is beyond insane.  This patch is trying to reduce it somewhat as
even with the smaller NUMA systems that have hit the desktop this seems to
be a fair thing to do.

The philosophy I have taken is as follows:
 1) If a zone is empty, don't tell, we don't need yet another line
    telling us so. The information is available since one can look up
    the fact how many zones were initialized in the first place.
 2) Put as much information on a line is possible, if it can be done
    in one line, rahter than two, then do it in one. I tried to format
    the temperature stuff for easy reading.

Change show_free_areas() to not print lines for empty zones.  If no zone
output is printed, the zone is empty.  This reduces the number of lines
dumped to the console in sysrq on a large system by several thousand lines.

Change the zone temperature printouts to use one line per CPU instead of
two lines (one hot, one cold).  On a 1024 CPU, 1024 node system, this
reduces the console output by over a million lines of output.

While this is a bigger problem on large NUMA systems, it is also applicable
to smaller desktop sized and mid range NUMA systems.

Old format:

Mem-info:
Node 0 DMA per-cpu:
cpu 0 hot: high 42, batch 7 used:24
cpu 0 cold: high 14, batch 3 used:1
cpu 1 hot: high 42, batch 7 used:34
cpu 1 cold: high 14, batch 3 used:0
cpu 2 hot: high 42, batch 7 used:0
cpu 2 cold: high 14, batch 3 used:0
cpu 3 hot: high 42, batch 7 used:0
cpu 3 cold: high 14, batch 3 used:0
cpu 4 hot: high 42, batch 7 used:0
cpu 4 cold: high 14, batch 3 used:0
cpu 5 hot: high 42, batch 7 used:0
cpu 5 cold: high 14, batch 3 used:0
cpu 6 hot: high 42, batch 7 used:0
cpu 6 cold: high 14, batch 3 used:0
cpu 7 hot: high 42, batch 7 used:0
cpu 7 cold: high 14, batch 3 used:0
Node 0 DMA32 per-cpu: empty
Node 0 Normal per-cpu: empty
Node 0 HighMem per-cpu: empty
Node 1 DMA per-cpu:
[snip]
Free pages:     5410688kB (0kB HighMem)
Active:9536 inactive:4261 dirty:6 writeback:0 unstable:0 free:338168 slab:1931 mapped:1900 pagetables:208
Node 0 DMA free:1676304kB min:3264kB low:4080kB high:4896kB active:128048kB inactive:61568kB present:1970880kB pages_scanned:0 all_unreclaimable? no
lowmem_reserve[]: 0 0 0 0
Node 0 DMA32 free:0kB min:0kB low:0kB high:0kB active:0kB inactive:0kB present:0kB pages_scanned:0 all_unreclaimable? no
lowmem_reserve[]: 0 0 0 0
Node 0 Normal free:0kB min:0kB low:0kB high:0kB active:0kB inactive:0kB present:0kB pages_scanned:0 all_unreclaimable? no
lowmem_reserve[]: 0 0 0 0
Node 0 HighMem free:0kB min:512kB low:512kB high:512kB active:0kB inactive:0kB present:0kB pages_scanned:0 all_unreclaimable? no
lowmem_reserve[]: 0 0 0 0
Node 1 DMA free:1951728kB min:3280kB low:4096kB high:4912kB active:5632kB inactive:1504kB present:1982464kB pages_scanned:0 all_unreclaimable? no
lowmem_reserve[]: 0 0 0 0
....

New format:

Mem-info:
Node 0 DMA per-cpu:
CPU    0: Hot: hi:   42, btch:   7 usd:  41   Cold: hi:   14, btch:   3 usd:   2
CPU    1: Hot: hi:   42, btch:   7 usd:  40   Cold: hi:   14, btch:   3 usd:   1
CPU    2: Hot: hi:   42, btch:   7 usd:   0   Cold: hi:   14, btch:   3 usd:   0
CPU    3: Hot: hi:   42, btch:   7 usd:   0   Cold: hi:   14, btch:   3 usd:   0
CPU    4: Hot: hi:   42, btch:   7 usd:   0   Cold: hi:   14, btch:   3 usd:   0
CPU    5: Hot: hi:   42, btch:   7 usd:   0   Cold: hi:   14, btch:   3 usd:   0
CPU    6: Hot: hi:   42, btch:   7 usd:   0   Cold: hi:   14, btch:   3 usd:   0
CPU    7: Hot: hi:   42, btch:   7 usd:   0   Cold: hi:   14, btch:   3 usd:   0
Node 1 DMA per-cpu:
[snip]
Free pages:     5411088kB (0kB HighMem)
Active:9558 inactive:4233 dirty:6 writeback:0 unstable:0 free:338193 slab:1942 mapped:1918 pagetables:208
Node 0 DMA free:1677648kB min:3264kB low:4080kB high:4896kB active:129296kB inactive:58864kB present:1970880kB pages_scanned:0 all_unreclaimable? no
lowmem_reserve[]: 0 0 0 0
Node 1 DMA free:1948448kB min:3280kB low:4096kB high:4912kB active:6864kB inactive:3536kB present:1982464kB pages_scanned:0 all_unreclaimable? no
lowmem_reserve[]: 0 0 0 0
Signed-off-by: NJes Sorensen <jes@sgi.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

mm/page_alloc.c

@@ -1305,34 +1305,30 @@ void si_meminfo_node(struct sysinfo *val, int nid)
  */
 void show_free_areas(void)
 {
-	int cpu, temperature;
+	int cpu;
 	unsigned long active;
 	unsigned long inactive;
 	unsigned long free;
 	struct zone *zone;
 
 	for_each_zone(zone) {
-		show_node(zone);
-		printk("%s per-cpu:", zone->name);
-
-		if (!populated_zone(zone)) {
-			printk(" empty\n");
+		if (!populated_zone(zone))
 			continue;
-		} else
-			printk("\n");
+
+		show_node(zone);
+		printk("%s per-cpu:\n", zone->name);
 
 		for_each_online_cpu(cpu) {
 			struct per_cpu_pageset *pageset;
 
 			pageset = zone_pcp(zone, cpu);
 
-			for (temperature = 0; temperature < 2; temperature++)
-				printk("cpu %d %s: high %d, batch %d used:%d\n",
-					cpu,
-					temperature ? "cold" : "hot",
-					pageset->pcp[temperature].high,
-					pageset->pcp[temperature].batch,
-					pageset->pcp[temperature].count);
+			printk("CPU %4d: Hot: hi:%5d, btch:%4d usd:%4d   "
+			       "Cold: hi:%5d, btch:%4d usd:%4d\n",
+			       cpu, pageset->pcp[0].high,
+			       pageset->pcp[0].batch, pageset->pcp[0].count,
+			       pageset->pcp[1].high, pageset->pcp[1].batch,
+			       pageset->pcp[1].count);
 		}
 	}
 
@@ -1354,6 +1350,9 @@ void show_free_areas(void)
 	for_each_zone(zone) {
 		int i;
 
+		if (!populated_zone(zone))
+			continue;
+
 		show_node(zone);
 		printk("%s"
 			" free:%lukB"
@@ -1386,12 +1385,11 @@ void show_free_areas(void)
 	for_each_zone(zone) {
  		unsigned long nr[MAX_ORDER], flags, order, total = 0;
 
+		if (!populated_zone(zone))
+			continue;
+
 		show_node(zone);
 		printk("%s: ", zone->name);
-		if (!populated_zone(zone)) {
-			printk("empty\n");
-			continue;
-		}
 
 		spin_lock_irqsave(&zone->lock, flags);
 		for (order = 0; order < MAX_ORDER; order++) {