提交 c697518a 编写于 作者: G Gleb Natapov 提交者: Marcelo Tosatti

KVM: Fix segment descriptor loading

Add proper error and permission checking. This patch also change task
switching code to load segment selectors before segment descriptors, like
SDM requires, otherwise permission checking during segment descriptor
loading will be incorrect.

Cc: stable@kernel.org (2.6.33, 2.6.32)
Signed-off-by: NGleb Natapov <gleb@redhat.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>
上级 6f550484
......@@ -614,8 +614,7 @@ int emulator_set_dr(struct x86_emulate_ctxt *ctxt, int dr,
unsigned long value);
void kvm_get_segment(struct kvm_vcpu *vcpu, struct kvm_segment *var, int seg);
int kvm_load_segment_descriptor(struct kvm_vcpu *vcpu, u16 selector,
int type_bits, int seg);
int kvm_load_segment_descriptor(struct kvm_vcpu *vcpu, u16 selector, int seg);
int kvm_task_switch(struct kvm_vcpu *vcpu, u16 tss_selector, int reason);
......
......@@ -1309,7 +1309,7 @@ static int emulate_pop_sreg(struct x86_emulate_ctxt *ctxt,
if (rc != 0)
return rc;
rc = kvm_load_segment_descriptor(ctxt->vcpu, (u16)selector, 1, seg);
rc = kvm_load_segment_descriptor(ctxt->vcpu, (u16)selector, seg);
return rc;
}
......@@ -1491,7 +1491,7 @@ static int emulate_ret_far(struct x86_emulate_ctxt *ctxt,
rc = emulate_pop(ctxt, ops, &cs, c->op_bytes);
if (rc)
return rc;
rc = kvm_load_segment_descriptor(ctxt->vcpu, (u16)cs, 1, VCPU_SREG_CS);
rc = kvm_load_segment_descriptor(ctxt->vcpu, (u16)cs, VCPU_SREG_CS);
return rc;
}
......@@ -2122,12 +2122,11 @@ x86_emulate_insn(struct x86_emulate_ctxt *ctxt, struct x86_emulate_ops *ops)
break;
case 0x8e: { /* mov seg, r/m16 */
uint16_t sel;
int type_bits;
int err;
sel = c->src.val;
if (c->modrm_reg == VCPU_SREG_CS) {
if (c->modrm_reg == VCPU_SREG_CS ||
c->modrm_reg > VCPU_SREG_GS) {
kvm_queue_exception(ctxt->vcpu, UD_VECTOR);
goto done;
}
......@@ -2135,18 +2134,7 @@ x86_emulate_insn(struct x86_emulate_ctxt *ctxt, struct x86_emulate_ops *ops)
if (c->modrm_reg == VCPU_SREG_SS)
toggle_interruptibility(ctxt, X86_SHADOW_INT_MOV_SS);
if (c->modrm_reg <= 5) {
type_bits = (c->modrm_reg == 1) ? 9 : 1;
err = kvm_load_segment_descriptor(ctxt->vcpu, sel,
type_bits, c->modrm_reg);
} else {
printk(KERN_INFO "Invalid segreg in modrm byte 0x%02x\n",
c->modrm);
goto cannot_emulate;
}
if (err < 0)
goto cannot_emulate;
rc = kvm_load_segment_descriptor(ctxt->vcpu, sel, c->modrm_reg);
c->dst.type = OP_NONE; /* Disable writeback. */
break;
......@@ -2320,11 +2308,9 @@ x86_emulate_insn(struct x86_emulate_ctxt *ctxt, struct x86_emulate_ops *ops)
case 0xe9: /* jmp rel */
goto jmp;
case 0xea: /* jmp far */
if (kvm_load_segment_descriptor(ctxt->vcpu, c->src2.val, 9,
VCPU_SREG_CS) < 0) {
DPRINTF("jmp far: Failed to load CS descriptor\n");
goto cannot_emulate;
}
if (kvm_load_segment_descriptor(ctxt->vcpu, c->src2.val,
VCPU_SREG_CS))
goto done;
c->eip = c->src.val;
break;
......
......@@ -4787,7 +4787,7 @@ static int kvm_load_realmode_segment(struct kvm_vcpu *vcpu, u16 selector, int se
.unusable = 0,
};
kvm_x86_ops->set_segment(vcpu, &segvar, seg);
return 0;
return X86EMUL_CONTINUE;
}
static int is_vm86_segment(struct kvm_vcpu *vcpu, int seg)
......@@ -4797,43 +4797,112 @@ static int is_vm86_segment(struct kvm_vcpu *vcpu, int seg)
(kvm_get_rflags(vcpu) & X86_EFLAGS_VM);
}
static void kvm_check_segment_descriptor(struct kvm_vcpu *vcpu, int seg,
u16 selector)
{
/* NULL selector is not valid for CS and SS */
if (seg == VCPU_SREG_CS || seg == VCPU_SREG_SS)
if (!selector)
kvm_queue_exception_e(vcpu, TS_VECTOR, selector >> 3);
}
int kvm_load_segment_descriptor(struct kvm_vcpu *vcpu, u16 selector,
int type_bits, int seg)
int kvm_load_segment_descriptor(struct kvm_vcpu *vcpu, u16 selector, int seg)
{
struct kvm_segment kvm_seg;
struct desc_struct seg_desc;
u8 dpl, rpl, cpl;
unsigned err_vec = GP_VECTOR;
u32 err_code = 0;
bool null_selector = !(selector & ~0x3); /* 0000-0003 are null */
int ret;
if (is_vm86_segment(vcpu, seg) || !is_protmode(vcpu))
return kvm_load_realmode_segment(vcpu, selector, seg);
if (load_guest_segment_descriptor(vcpu, selector, &seg_desc))
return 1;
/* NULL selector is not valid for TR, CS and SS */
if ((seg == VCPU_SREG_CS || seg == VCPU_SREG_SS || seg == VCPU_SREG_TR)
&& null_selector)
goto exception;
/* TR should be in GDT only */
if (seg == VCPU_SREG_TR && (selector & (1 << 2)))
goto exception;
ret = load_guest_segment_descriptor(vcpu, selector, &seg_desc);
if (ret)
return ret;
seg_desct_to_kvm_desct(&seg_desc, selector, &kvm_seg);
kvm_check_segment_descriptor(vcpu, seg, selector);
kvm_seg.type |= type_bits;
if (null_selector) { /* for NULL selector skip all following checks */
kvm_seg.unusable = 1;
goto load;
}
if (seg != VCPU_SREG_SS && seg != VCPU_SREG_CS &&
seg != VCPU_SREG_LDTR)
if (!kvm_seg.s)
kvm_seg.unusable = 1;
err_code = selector & 0xfffc;
err_vec = GP_VECTOR;
kvm_set_segment(vcpu, &kvm_seg, seg);
if (selector && !kvm_seg.unusable && kvm_seg.s) {
/* can't load system descriptor into segment selecor */
if (seg <= VCPU_SREG_GS && !kvm_seg.s)
goto exception;
if (!kvm_seg.present) {
err_vec = (seg == VCPU_SREG_SS) ? SS_VECTOR : NP_VECTOR;
goto exception;
}
rpl = selector & 3;
dpl = kvm_seg.dpl;
cpl = kvm_x86_ops->get_cpl(vcpu);
switch (seg) {
case VCPU_SREG_SS:
/*
* segment is not a writable data segment or segment
* selector's RPL != CPL or segment selector's RPL != CPL
*/
if (rpl != cpl || (kvm_seg.type & 0xa) != 0x2 || dpl != cpl)
goto exception;
break;
case VCPU_SREG_CS:
if (!(kvm_seg.type & 8))
goto exception;
if (kvm_seg.type & 4) {
/* conforming */
if (dpl > cpl)
goto exception;
} else {
/* nonconforming */
if (rpl > cpl || dpl != cpl)
goto exception;
}
/* CS(RPL) <- CPL */
selector = (selector & 0xfffc) | cpl;
break;
case VCPU_SREG_TR:
if (kvm_seg.s || (kvm_seg.type != 1 && kvm_seg.type != 9))
goto exception;
break;
case VCPU_SREG_LDTR:
if (kvm_seg.s || kvm_seg.type != 2)
goto exception;
break;
default: /* DS, ES, FS, or GS */
/*
* segment is not a data or readable code segment or
* ((segment is a data or nonconforming code segment)
* and (both RPL and CPL > DPL))
*/
if ((kvm_seg.type & 0xa) == 0x8 ||
(((kvm_seg.type & 0xc) != 0xc) && (rpl > dpl && cpl > dpl)))
goto exception;
break;
}
if (!kvm_seg.unusable && kvm_seg.s) {
/* mark segment as accessed */
kvm_seg.type |= 1;
seg_desc.type |= 1;
save_guest_segment_descriptor(vcpu, selector, &seg_desc);
}
return 0;
load:
kvm_set_segment(vcpu, &kvm_seg, seg);
return X86EMUL_CONTINUE;
exception:
kvm_queue_exception_e(vcpu, err_vec, err_code);
return X86EMUL_PROPAGATE_FAULT;
}
static void save_state_to_tss32(struct kvm_vcpu *vcpu,
......@@ -4859,6 +4928,14 @@ static void save_state_to_tss32(struct kvm_vcpu *vcpu,
tss->ldt_selector = get_segment_selector(vcpu, VCPU_SREG_LDTR);
}
static void kvm_load_segment_selector(struct kvm_vcpu *vcpu, u16 sel, int seg)
{
struct kvm_segment kvm_seg;
kvm_get_segment(vcpu, &kvm_seg, seg);
kvm_seg.selector = sel;
kvm_set_segment(vcpu, &kvm_seg, seg);
}
static int load_state_from_tss32(struct kvm_vcpu *vcpu,
struct tss_segment_32 *tss)
{
......@@ -4876,25 +4953,41 @@ static int load_state_from_tss32(struct kvm_vcpu *vcpu,
kvm_register_write(vcpu, VCPU_REGS_RSI, tss->esi);
kvm_register_write(vcpu, VCPU_REGS_RDI, tss->edi);
if (kvm_load_segment_descriptor(vcpu, tss->ldt_selector, 0, VCPU_SREG_LDTR))
/*
* SDM says that segment selectors are loaded before segment
* descriptors
*/
kvm_load_segment_selector(vcpu, tss->ldt_selector, VCPU_SREG_LDTR);
kvm_load_segment_selector(vcpu, tss->es, VCPU_SREG_ES);
kvm_load_segment_selector(vcpu, tss->cs, VCPU_SREG_CS);
kvm_load_segment_selector(vcpu, tss->ss, VCPU_SREG_SS);
kvm_load_segment_selector(vcpu, tss->ds, VCPU_SREG_DS);
kvm_load_segment_selector(vcpu, tss->fs, VCPU_SREG_FS);
kvm_load_segment_selector(vcpu, tss->gs, VCPU_SREG_GS);
/*
* Now load segment descriptors. If fault happenes at this stage
* it is handled in a context of new task
*/
if (kvm_load_segment_descriptor(vcpu, tss->ldt_selector, VCPU_SREG_LDTR))
return 1;
if (kvm_load_segment_descriptor(vcpu, tss->es, 1, VCPU_SREG_ES))
if (kvm_load_segment_descriptor(vcpu, tss->es, VCPU_SREG_ES))
return 1;
if (kvm_load_segment_descriptor(vcpu, tss->cs, 9, VCPU_SREG_CS))
if (kvm_load_segment_descriptor(vcpu, tss->cs, VCPU_SREG_CS))
return 1;
if (kvm_load_segment_descriptor(vcpu, tss->ss, 1, VCPU_SREG_SS))
if (kvm_load_segment_descriptor(vcpu, tss->ss, VCPU_SREG_SS))
return 1;
if (kvm_load_segment_descriptor(vcpu, tss->ds, 1, VCPU_SREG_DS))
if (kvm_load_segment_descriptor(vcpu, tss->ds, VCPU_SREG_DS))
return 1;
if (kvm_load_segment_descriptor(vcpu, tss->fs, 1, VCPU_SREG_FS))
if (kvm_load_segment_descriptor(vcpu, tss->fs, VCPU_SREG_FS))
return 1;
if (kvm_load_segment_descriptor(vcpu, tss->gs, 1, VCPU_SREG_GS))
if (kvm_load_segment_descriptor(vcpu, tss->gs, VCPU_SREG_GS))
return 1;
return 0;
}
......@@ -4934,19 +5027,33 @@ static int load_state_from_tss16(struct kvm_vcpu *vcpu,
kvm_register_write(vcpu, VCPU_REGS_RSI, tss->si);
kvm_register_write(vcpu, VCPU_REGS_RDI, tss->di);
if (kvm_load_segment_descriptor(vcpu, tss->ldt, 0, VCPU_SREG_LDTR))
/*
* SDM says that segment selectors are loaded before segment
* descriptors
*/
kvm_load_segment_selector(vcpu, tss->ldt, VCPU_SREG_LDTR);
kvm_load_segment_selector(vcpu, tss->es, VCPU_SREG_ES);
kvm_load_segment_selector(vcpu, tss->cs, VCPU_SREG_CS);
kvm_load_segment_selector(vcpu, tss->ss, VCPU_SREG_SS);
kvm_load_segment_selector(vcpu, tss->ds, VCPU_SREG_DS);
/*
* Now load segment descriptors. If fault happenes at this stage
* it is handled in a context of new task
*/
if (kvm_load_segment_descriptor(vcpu, tss->ldt, VCPU_SREG_LDTR))
return 1;
if (kvm_load_segment_descriptor(vcpu, tss->es, 1, VCPU_SREG_ES))
if (kvm_load_segment_descriptor(vcpu, tss->es, VCPU_SREG_ES))
return 1;
if (kvm_load_segment_descriptor(vcpu, tss->cs, 9, VCPU_SREG_CS))
if (kvm_load_segment_descriptor(vcpu, tss->cs, VCPU_SREG_CS))
return 1;
if (kvm_load_segment_descriptor(vcpu, tss->ss, 1, VCPU_SREG_SS))
if (kvm_load_segment_descriptor(vcpu, tss->ss, VCPU_SREG_SS))
return 1;
if (kvm_load_segment_descriptor(vcpu, tss->ds, 1, VCPU_SREG_DS))
if (kvm_load_segment_descriptor(vcpu, tss->ds, VCPU_SREG_DS))
return 1;
return 0;
}
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册