提交 c4671a95 编写于 作者: P Peter Ujfalusi 提交者: Mark Brown

ASoC: Replace remaining use of *_volsw_2r with *_volsw

The snd_soc_*_volsw_2r functionality has been merged to
*volsw callbacks.
Few places still used the get, or put variant of volsw_2r,
replace those with the corresponding *_volsw.
Signed-off-by: NPeter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
上级 9a185b9a
......@@ -355,7 +355,7 @@ static int wm8350_put_volsw_2r_vu(struct snd_kcontrol *kcontrol,
return 1;
}
ret = snd_soc_put_volsw_2r(kcontrol, ucontrol);
ret = snd_soc_put_volsw(kcontrol, ucontrol);
if (ret < 0)
return ret;
......@@ -392,7 +392,7 @@ static int wm8350_get_volsw_2r(struct snd_kcontrol *kcontrol,
break;
}
return snd_soc_get_volsw_2r(kcontrol, ucontrol);
return snd_soc_get_volsw(kcontrol, ucontrol);
}
static const char *wm8350_deemp[] = { "None", "32kHz", "44.1kHz", "48kHz" };
......
......@@ -213,7 +213,7 @@ static int wm8580_out_vu(struct snd_kcontrol *kcontrol,
reg_cache[reg] = 0;
reg_cache[reg2] = 0;
ret = snd_soc_put_volsw_2r(kcontrol, ucontrol);
ret = snd_soc_put_volsw(kcontrol, ucontrol);
if (ret < 0)
return ret;
......@@ -228,15 +228,15 @@ static const struct snd_kcontrol_new wm8580_snd_controls[] = {
SOC_DOUBLE_R_EXT_TLV("DAC1 Playback Volume",
WM8580_DIGITAL_ATTENUATION_DACL1,
WM8580_DIGITAL_ATTENUATION_DACR1,
0, 0xff, 0, snd_soc_get_volsw_2r, wm8580_out_vu, dac_tlv),
0, 0xff, 0, snd_soc_get_volsw, wm8580_out_vu, dac_tlv),
SOC_DOUBLE_R_EXT_TLV("DAC2 Playback Volume",
WM8580_DIGITAL_ATTENUATION_DACL2,
WM8580_DIGITAL_ATTENUATION_DACR2,
0, 0xff, 0, snd_soc_get_volsw_2r, wm8580_out_vu, dac_tlv),
0, 0xff, 0, snd_soc_get_volsw, wm8580_out_vu, dac_tlv),
SOC_DOUBLE_R_EXT_TLV("DAC3 Playback Volume",
WM8580_DIGITAL_ATTENUATION_DACL3,
WM8580_DIGITAL_ATTENUATION_DACR3,
0, 0xff, 0, snd_soc_get_volsw_2r, wm8580_out_vu, dac_tlv),
0, 0xff, 0, snd_soc_get_volsw, wm8580_out_vu, dac_tlv),
SOC_SINGLE("DAC1 Deemphasis Switch", WM8580_DAC_CONTROL3, 0, 1, 0),
SOC_SINGLE("DAC2 Deemphasis Switch", WM8580_DAC_CONTROL3, 1, 1, 0),
......
......@@ -222,7 +222,7 @@ static int wm8993_put_dc_servo(struct snd_kcontrol *kcontrol,
struct wm_hubs_data *hubs = snd_soc_codec_get_drvdata(codec);
int ret;
ret = snd_soc_put_volsw_2r(kcontrol, ucontrol);
ret = snd_soc_put_volsw(kcontrol, ucontrol);
/* Updating the analogue gains invalidates the DC servo cache */
hubs->class_w_dcs = 0;
......@@ -364,7 +364,7 @@ SOC_ENUM("Speaker Mode", speaker_mode),
SOC_DOUBLE_R_EXT_TLV("Headphone Volume",
WM8993_LEFT_OUTPUT_VOLUME, WM8993_RIGHT_OUTPUT_VOLUME,
0, 63, 0, snd_soc_get_volsw_2r, wm8993_put_dc_servo,
0, 63, 0, snd_soc_get_volsw, wm8993_put_dc_servo,
outpga_tlv),
SOC_DOUBLE_R("Headphone Switch", WM8993_LEFT_OUTPUT_VOLUME,
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册