提交 c44f5f51 编写于 作者: A Alexander Duyck 提交者: Jeff Kirsher

ixgbe: Always use context 0, even for FCoE and TSO

We were spending cycles separating the FCoE and TSO contexts even though we
always overwriting the context anyway.  Instead of doing that we can just
use context 0 for all descriptors.
Signed-off-by: NAlexander Duyck <alexander.h.duyck@intel.com>
Tested-by: NPhil Schmitt <phillip.j.schmitt@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
上级 8f4fbb9b
......@@ -550,9 +550,8 @@ int ixgbe_fso(struct ixgbe_ring *tx_ring,
/* set flag indicating FCOE to ixgbe_tx_map call */
first->tx_flags |= IXGBE_TX_FLAGS_FCOE;
/* mss_l4len_id: use 1 for FSO as TSO, no need for L4LEN */
/* mss_l4len_id: use 0 for FSO as TSO, no need for L4LEN */
mss_l4len_idx = skb_shinfo(skb)->gso_size << IXGBE_ADVTXD_MSS_SHIFT;
mss_l4len_idx |= 1 << IXGBE_ADVTXD_IDX_SHIFT;
/* vlan_macip_lens: HEADLEN, MACLEN, VLAN tag */
vlan_macip_lens = skb_transport_offset(skb) +
......
......@@ -5944,10 +5944,9 @@ static int ixgbe_tso(struct ixgbe_ring *tx_ring,
first->gso_segs = skb_shinfo(skb)->gso_segs;
first->bytecount += (first->gso_segs - 1) * *hdr_len;
/* mss_l4len_id: use 1 as index for TSO */
/* mss_l4len_id: use 0 as index for TSO */
mss_l4len_idx = l4len << IXGBE_ADVTXD_L4LEN_SHIFT;
mss_l4len_idx |= skb_shinfo(skb)->gso_size << IXGBE_ADVTXD_MSS_SHIFT;
mss_l4len_idx |= 1 << IXGBE_ADVTXD_IDX_SHIFT;
/* vlan_macip_lens: HEADLEN, MACLEN, VLAN tag */
vlan_macip_lens = skb_network_header_len(skb);
......@@ -6073,14 +6072,6 @@ static void ixgbe_tx_olinfo_status(union ixgbe_adv_tx_desc *tx_desc,
if (tx_flags & IXGBE_TX_FLAGS_IPV4)
olinfo_status |= cpu_to_le32(IXGBE_ADVTXD_POPTS_IXSM);
/* use index 1 context for TSO/FSO/FCOE */
#ifdef IXGBE_FCOE
if (tx_flags & (IXGBE_TX_FLAGS_TSO | IXGBE_TX_FLAGS_FCOE))
#else
if (tx_flags & IXGBE_TX_FLAGS_TSO)
#endif
olinfo_status |= cpu_to_le32(1 << IXGBE_ADVTXD_IDX_SHIFT);
/*
* Check Context must be set if Tx switch is enabled, which it
* always is for case where virtual functions are running
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册