提交 c441c297 编写于 作者: T Takashi Iwai

Merge branch 'topic/usb-caiaq' into for-linus

......@@ -48,7 +48,10 @@ config SND_USB_CAIAQ
* Native Instruments Kore Controller
* Native Instruments Kore Controller 2
* Native Instruments Audio Kontrol 1
* Native Instruments Audio 4 DJ
* Native Instruments Audio 8 DJ
* Native Instruments Guitar Rig Session I/O
* Native Instruments Guitar Rig mobile
To compile this driver as a module, choose M here: the module
will be called snd-usb-caiaq.
......
......@@ -114,6 +114,7 @@ static int stream_start(struct snd_usb_caiaqdev *dev)
dev->output_panic = 0;
dev->first_packet = 1;
dev->streaming = 1;
dev->warned = 0;
for (i = 0; i < N_URBS; i++) {
ret = usb_submit_urb(dev->data_urbs_in[i], GFP_ATOMIC);
......@@ -376,6 +377,9 @@ static void read_in_urb_mode2(struct snd_usb_caiaqdev *dev,
for (stream = 0; stream < dev->n_streams; stream++, i++) {
sub = dev->sub_capture[stream];
if (dev->input_panic)
usb_buf[i] = 0;
if (sub) {
struct snd_pcm_runtime *rt = sub->runtime;
char *audio_buf = rt->dma_area;
......@@ -397,6 +401,9 @@ static void read_in_urb(struct snd_usb_caiaqdev *dev,
if (!dev->streaming)
return;
if (iso->actual_length < dev->bpp)
return;
switch (dev->spec.data_alignment) {
case 0:
read_in_urb_mode0(dev, urb, iso);
......@@ -406,10 +413,11 @@ static void read_in_urb(struct snd_usb_caiaqdev *dev,
break;
}
if (dev->input_panic || dev->output_panic) {
if ((dev->input_panic || dev->output_panic) && !dev->warned) {
debug("streaming error detected %s %s\n",
dev->input_panic ? "(input)" : "",
dev->output_panic ? "(output)" : "");
dev->warned = 1;
}
}
......@@ -638,9 +646,10 @@ int snd_usb_caiaq_audio_init(struct snd_usb_caiaqdev *dev)
case USB_ID(USB_VID_NATIVEINSTRUMENTS, USB_PID_AK1):
case USB_ID(USB_VID_NATIVEINSTRUMENTS, USB_PID_RIGKONTROL3):
case USB_ID(USB_VID_NATIVEINSTRUMENTS, USB_PID_SESSIONIO):
dev->samplerates |= SNDRV_PCM_RATE_88200;
case USB_ID(USB_VID_NATIVEINSTRUMENTS, USB_PID_GUITARRIGMOBILE):
dev->samplerates |= SNDRV_PCM_RATE_192000;
break;
/* fall thru */
case USB_ID(USB_VID_NATIVEINSTRUMENTS, USB_PID_AUDIO4DJ):
case USB_ID(USB_VID_NATIVEINSTRUMENTS, USB_PID_AUDIO8DJ):
dev->samplerates |= SNDRV_PCM_RATE_88200;
break;
......
......@@ -39,12 +39,12 @@ static int control_info(struct snd_kcontrol *kcontrol,
struct snd_usb_caiaqdev *dev = caiaqdev(chip->card);
int pos = kcontrol->private_value;
int is_intval = pos & CNT_INTVAL;
unsigned int id = dev->chip.usb_id;
uinfo->count = 1;
pos &= ~CNT_INTVAL;
if (dev->chip.usb_id ==
USB_ID(USB_VID_NATIVEINSTRUMENTS, USB_PID_AUDIO8DJ)
if (id == USB_ID(USB_VID_NATIVEINSTRUMENTS, USB_PID_AUDIO8DJ)
&& (pos == 0)) {
/* current input mode of A8DJ */
uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER;
......@@ -53,6 +53,15 @@ static int control_info(struct snd_kcontrol *kcontrol,
return 0;
}
if (id == USB_ID(USB_VID_NATIVEINSTRUMENTS, USB_PID_AUDIO4DJ)
&& (pos == 0)) {
/* current input mode of A4DJ */
uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER;
uinfo->value.integer.min = 0;
uinfo->value.integer.max = 1;
return 0;
}
if (is_intval) {
uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER;
uinfo->value.integer.min = 0;
......@@ -73,6 +82,14 @@ static int control_get(struct snd_kcontrol *kcontrol,
struct snd_usb_caiaqdev *dev = caiaqdev(chip->card);
int pos = kcontrol->private_value;
if (dev->chip.usb_id ==
USB_ID(USB_VID_NATIVEINSTRUMENTS, USB_PID_AUDIO4DJ)) {
/* A4DJ has only one control */
/* do not expose hardware input mode 0 */
ucontrol->value.integer.value[0] = dev->control_state[0] - 1;
return 0;
}
if (pos & CNT_INTVAL)
ucontrol->value.integer.value[0]
= dev->control_state[pos & ~CNT_INTVAL];
......@@ -90,10 +107,20 @@ static int control_put(struct snd_kcontrol *kcontrol,
struct snd_usb_caiaqdev *dev = caiaqdev(chip->card);
int pos = kcontrol->private_value;
if (dev->chip.usb_id ==
USB_ID(USB_VID_NATIVEINSTRUMENTS, USB_PID_AUDIO4DJ)) {
/* A4DJ has only one control */
/* do not expose hardware input mode 0 */
dev->control_state[0] = ucontrol->value.integer.value[0] + 1;
snd_usb_caiaq_send_command(dev, EP1_CMD_WRITE_IO,
dev->control_state, sizeof(dev->control_state));
return 1;
}
if (pos & CNT_INTVAL) {
dev->control_state[pos & ~CNT_INTVAL]
= ucontrol->value.integer.value[0];
snd_usb_caiaq_send_command(dev, EP1_CMD_DIMM_LEDS,
snd_usb_caiaq_send_command(dev, EP1_CMD_WRITE_IO,
dev->control_state, sizeof(dev->control_state));
} else {
if (ucontrol->value.integer.value[0])
......@@ -243,10 +270,13 @@ static struct caiaq_controller a8dj_controller[] = {
{ "GND lift for TC Vinyl mode", 24 + 0 },
{ "GND lift for TC CD/Line mode", 24 + 1 },
{ "GND lift for phono mode", 24 + 2 },
{ "GND lift for TC Vinyl mode", 24 + 3 },
{ "Software lock", 40 }
};
static struct caiaq_controller a4dj_controller[] = {
{ "Current input mode", 0 | CNT_INTVAL }
};
static int __devinit add_controls(struct caiaq_controller *c, int num,
struct snd_usb_caiaqdev *dev)
{
......@@ -295,6 +325,10 @@ int __devinit snd_usb_caiaq_control_init(struct snd_usb_caiaqdev *dev)
ret = add_controls(a8dj_controller,
ARRAY_SIZE(a8dj_controller), dev);
break;
case USB_ID(USB_VID_NATIVEINSTRUMENTS, USB_PID_AUDIO4DJ):
ret = add_controls(a4dj_controller,
ARRAY_SIZE(a4dj_controller), dev);
break;
}
return ret;
......
......@@ -42,15 +42,17 @@
#endif
MODULE_AUTHOR("Daniel Mack <daniel@caiaq.de>");
MODULE_DESCRIPTION("caiaq USB audio, version 1.3.10");
MODULE_DESCRIPTION("caiaq USB audio, version 1.3.13");
MODULE_LICENSE("GPL");
MODULE_SUPPORTED_DEVICE("{{Native Instruments, RigKontrol2},"
"{Native Instruments, RigKontrol3},"
"{Native Instruments, Kore Controller},"
"{Native Instruments, Kore Controller 2},"
"{Native Instruments, Audio Kontrol 1},"
"{Native Instruments, Audio 4 DJ},"
"{Native Instruments, Audio 8 DJ},"
"{Native Instruments, Session I/O}}");
"{Native Instruments, Session I/O},"
"{Native Instruments, GuitarRig mobile}");
static int index[SNDRV_CARDS] = SNDRV_DEFAULT_IDX; /* Index 0-max */
static char* id[SNDRV_CARDS] = SNDRV_DEFAULT_STR; /* Id for this card */
......@@ -116,6 +118,16 @@ static struct usb_device_id snd_usb_id_table[] = {
.idVendor = USB_VID_NATIVEINSTRUMENTS,
.idProduct = USB_PID_SESSIONIO
},
{
.match_flags = USB_DEVICE_ID_MATCH_DEVICE,
.idVendor = USB_VID_NATIVEINSTRUMENTS,
.idProduct = USB_PID_GUITARRIGMOBILE
},
{
.match_flags = USB_DEVICE_ID_MATCH_DEVICE,
.idVendor = USB_VID_NATIVEINSTRUMENTS,
.idProduct = USB_PID_AUDIO4DJ
},
{ /* terminator */ }
};
......@@ -239,6 +251,8 @@ int snd_usb_caiaq_set_audio_params (struct snd_usb_caiaqdev *dev,
if (dev->audio_parm_answer != 1)
debug("unable to set the device's audio params\n");
else
dev->bpp = bpp;
return dev->audio_parm_answer == 1 ? 0 : -EINVAL;
}
......@@ -300,6 +314,12 @@ static void __devinit setup_card(struct snd_usb_caiaqdev *dev)
}
break;
case USB_ID(USB_VID_NATIVEINSTRUMENTS, USB_PID_AUDIO4DJ):
/* Audio 4 DJ - default input mode to phono */
dev->control_state[0] = 2;
snd_usb_caiaq_send_command(dev, EP1_CMD_WRITE_IO,
dev->control_state, 1);
break;
}
if (dev->spec.num_analog_audio_out +
......
......@@ -10,8 +10,10 @@
#define USB_PID_KORECONTROLLER 0x4711
#define USB_PID_KORECONTROLLER2 0x4712
#define USB_PID_AK1 0x0815
#define USB_PID_AUDIO4DJ 0x0839
#define USB_PID_AUDIO8DJ 0x1978
#define USB_PID_SESSIONIO 0x1915
#define USB_PID_GUITARRIGMOBILE 0x0d8d
#define EP1_BUFSIZE 64
#define CAIAQ_USB_STR_LEN 0xff
......@@ -87,9 +89,9 @@ struct snd_usb_caiaqdev {
int audio_out_buf_pos[MAX_STREAMS];
int period_in_count[MAX_STREAMS];
int period_out_count[MAX_STREAMS];
int input_panic, output_panic;
int input_panic, output_panic, warned;
char *audio_in_buf, *audio_out_buf;
unsigned int samplerates;
unsigned int samplerates, bpp;
struct snd_pcm_substream *sub_playback[MAX_STREAMS];
struct snd_pcm_substream *sub_capture[MAX_STREAMS];
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册