[PATCH] sky2: receive queue watermark tweak

This patch makes the receive performance on some systems go from
714MB/s to 941MB/s. It adjusts the watermark of the receive queue
to be lower, thereby avoiding excess hardware flow control. This is
most important on the systems which have little/no additional buffering.
Signed-off-by: NStephen Hemminger <shemminger@osdl.org>
Signed-off-by: NJeff Garzik <jeff@garzik.org>

drivers/net/sky2.c

@@ -1062,11 +1062,16 @@ static int sky2_rx_start(struct sky2_port *sky2)
 	sky2->rx_put = sky2->rx_next = 0;
 	sky2_qset(hw, rxq);
 
+	/* On PCI express lowering the watermark gives better performance */
+	if (pci_find_capability(hw->pdev, PCI_CAP_ID_EXP))
+		sky2_write32(hw, Q_ADDR(rxq, Q_WM), BMU_WM_PEX);
+
+	/* These chips have no ram buffer?
+	 * MAC Rx RAM Read is controlled by hardware */
 	if (hw->chip_id == CHIP_ID_YUKON_EC_U &&
-	    (hw->chip_rev == CHIP_REV_YU_EC_U_A1 || hw->chip_rev == CHIP_REV_YU_EC_U_B0)) {
-		/* MAC Rx RAM Read is controlled by hardware */
+	    (hw->chip_rev == CHIP_REV_YU_EC_U_A1
+	     || hw->chip_rev == CHIP_REV_YU_EC_U_B0))
 		sky2_write32(hw, Q_ADDR(rxq, Q_F), F_M_RX_RAM_DIS);
-	}
 
 	sky2_prefetch_init(hw, rxq, sky2->rx_le_map, RX_LE_SIZE - 1);
 

drivers/net/sky2.h

@@ -680,6 +680,7 @@ enum {
 			  BMU_FIFO_ENA | BMU_OP_ON,
 
 	BMU_WM_DEFAULT = 0x600,
+	BMU_WM_PEX     = 0x80,
 };
 
 /* Tx BMU Control / Status Registers (Yukon-2) */