提交 c2419b4a 编写于 作者: J Jeremy Fitzhardinge 提交者: Konrad Rzeszutek Wilk

xen: allow enable use of VGA console on dom0

Get the information about the VGA console hardware from Xen, and put
it into the form the bootloader normally generates, so that the rest
of the kernel can deal with VGA as usual.

[ Impact: make VGA console work in dom0 ]
Signed-off-by: NJeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
[v1: Rebased on 2.6.39]
[v2: Removed incorrect comments and fixed compile warnings]
Signed-off-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>
上级 61c4f2c8
...@@ -18,5 +18,5 @@ obj-y := enlighten.o setup.o multicalls.o mmu.o irq.o \ ...@@ -18,5 +18,5 @@ obj-y := enlighten.o setup.o multicalls.o mmu.o irq.o \
obj-$(CONFIG_SMP) += smp.o obj-$(CONFIG_SMP) += smp.o
obj-$(CONFIG_PARAVIRT_SPINLOCKS)+= spinlock.o obj-$(CONFIG_PARAVIRT_SPINLOCKS)+= spinlock.o
obj-$(CONFIG_XEN_DEBUG_FS) += debugfs.o obj-$(CONFIG_XEN_DEBUG_FS) += debugfs.o
obj-$(CONFIG_XEN_DOM0) += vga.o
obj-$(CONFIG_SWIOTLB_XEN) += pci-swiotlb-xen.o obj-$(CONFIG_SWIOTLB_XEN) += pci-swiotlb-xen.o
...@@ -1241,6 +1241,14 @@ asmlinkage void __init xen_start_kernel(void) ...@@ -1241,6 +1241,14 @@ asmlinkage void __init xen_start_kernel(void)
if (pci_xen) if (pci_xen)
x86_init.pci.arch_init = pci_xen_init; x86_init.pci.arch_init = pci_xen_init;
} else { } else {
const struct dom0_vga_console_info *info =
(void *)((char *)xen_start_info +
xen_start_info->console.dom0.info_off);
xen_init_vga(info, xen_start_info->console.dom0.info_size);
xen_start_info->console.domU.mfn = 0;
xen_start_info->console.domU.evtchn = 0;
/* Make sure ACS will be enabled */ /* Make sure ACS will be enabled */
pci_request_acs(); pci_request_acs();
} }
......
#include <linux/screen_info.h>
#include <linux/init.h>
#include <asm/bootparam.h>
#include <asm/setup.h>
#include <xen/interface/xen.h>
#include "xen-ops.h"
void __init xen_init_vga(const struct dom0_vga_console_info *info, size_t size)
{
struct screen_info *screen_info = &boot_params.screen_info;
/* This is drawn from a dump from vgacon:startup in
* standard Linux. */
screen_info->orig_video_mode = 3;
screen_info->orig_video_isVGA = 1;
screen_info->orig_video_lines = 25;
screen_info->orig_video_cols = 80;
screen_info->orig_video_ega_bx = 3;
screen_info->orig_video_points = 16;
screen_info->orig_y = screen_info->orig_video_lines - 1;
switch (info->video_type) {
case XEN_VGATYPE_TEXT_MODE_3:
if (size < offsetof(struct dom0_vga_console_info, u.text_mode_3)
+ sizeof(info->u.text_mode_3))
break;
screen_info->orig_video_lines = info->u.text_mode_3.rows;
screen_info->orig_video_cols = info->u.text_mode_3.columns;
screen_info->orig_x = info->u.text_mode_3.cursor_x;
screen_info->orig_y = info->u.text_mode_3.cursor_y;
screen_info->orig_video_points =
info->u.text_mode_3.font_height;
break;
case XEN_VGATYPE_VESA_LFB:
if (size < offsetof(struct dom0_vga_console_info,
u.vesa_lfb.gbl_caps))
break;
screen_info->orig_video_isVGA = VIDEO_TYPE_VLFB;
screen_info->lfb_width = info->u.vesa_lfb.width;
screen_info->lfb_height = info->u.vesa_lfb.height;
screen_info->lfb_depth = info->u.vesa_lfb.bits_per_pixel;
screen_info->lfb_base = info->u.vesa_lfb.lfb_base;
screen_info->lfb_size = info->u.vesa_lfb.lfb_size;
screen_info->lfb_linelength = info->u.vesa_lfb.bytes_per_line;
screen_info->red_size = info->u.vesa_lfb.red_size;
screen_info->red_pos = info->u.vesa_lfb.red_pos;
screen_info->green_size = info->u.vesa_lfb.green_size;
screen_info->green_pos = info->u.vesa_lfb.green_pos;
screen_info->blue_size = info->u.vesa_lfb.blue_size;
screen_info->blue_pos = info->u.vesa_lfb.blue_pos;
screen_info->rsvd_size = info->u.vesa_lfb.rsvd_size;
screen_info->rsvd_pos = info->u.vesa_lfb.rsvd_pos;
if (size >= offsetof(struct dom0_vga_console_info,
u.vesa_lfb.gbl_caps)
+ sizeof(info->u.vesa_lfb.gbl_caps))
screen_info->capabilities = info->u.vesa_lfb.gbl_caps;
if (size >= offsetof(struct dom0_vga_console_info,
u.vesa_lfb.mode_attrs)
+ sizeof(info->u.vesa_lfb.mode_attrs))
screen_info->vesa_attributes = info->u.vesa_lfb.mode_attrs;
break;
}
}
...@@ -88,6 +88,17 @@ static inline void xen_uninit_lock_cpu(int cpu) ...@@ -88,6 +88,17 @@ static inline void xen_uninit_lock_cpu(int cpu)
} }
#endif #endif
struct dom0_vga_console_info;
#ifdef CONFIG_XEN_DOM0
void __init xen_init_vga(const struct dom0_vga_console_info *, size_t size);
#else
static inline void __init xen_init_vga(const struct dom0_vga_console_info *info,
size_t size)
{
}
#endif
/* Declare an asm function, along with symbols needed to make it /* Declare an asm function, along with symbols needed to make it
inlineable */ inlineable */
#define DECL_ASM(ret, name, ...) \ #define DECL_ASM(ret, name, ...) \
......
...@@ -449,6 +449,45 @@ struct start_info { ...@@ -449,6 +449,45 @@ struct start_info {
int8_t cmd_line[MAX_GUEST_CMDLINE]; int8_t cmd_line[MAX_GUEST_CMDLINE];
}; };
struct dom0_vga_console_info {
uint8_t video_type;
#define XEN_VGATYPE_TEXT_MODE_3 0x03
#define XEN_VGATYPE_VESA_LFB 0x23
union {
struct {
/* Font height, in pixels. */
uint16_t font_height;
/* Cursor location (column, row). */
uint16_t cursor_x, cursor_y;
/* Number of rows and columns (dimensions in characters). */
uint16_t rows, columns;
} text_mode_3;
struct {
/* Width and height, in pixels. */
uint16_t width, height;
/* Bytes per scan line. */
uint16_t bytes_per_line;
/* Bits per pixel. */
uint16_t bits_per_pixel;
/* LFB physical address, and size (in units of 64kB). */
uint32_t lfb_base;
uint32_t lfb_size;
/* RGB mask offsets and sizes, as defined by VBE 1.2+ */
uint8_t red_pos, red_size;
uint8_t green_pos, green_size;
uint8_t blue_pos, blue_size;
uint8_t rsvd_pos, rsvd_size;
/* VESA capabilities (offset 0xa, VESA command 0x4f00). */
uint32_t gbl_caps;
/* Mode attributes (offset 0x0, VESA command 0x4f01). */
uint16_t mode_attrs;
} vesa_lfb;
} u;
};
/* These flags are passed in the 'flags' field of start_info_t. */ /* These flags are passed in the 'flags' field of start_info_t. */
#define SIF_PRIVILEGED (1<<0) /* Is the domain privileged? */ #define SIF_PRIVILEGED (1<<0) /* Is the domain privileged? */
#define SIF_INITDOMAIN (1<<1) /* Is this the initial control domain? */ #define SIF_INITDOMAIN (1<<1) /* Is this the initial control domain? */
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册