提交 c239f279 编写于 作者: M Michael Chan 提交者: David S. Miller

bnx2: Enable AER on PCIE devices only

To prevent unnecessary error message.  pci_save_state() is also moved to
the end of ->probe() so that all PCI config, including AER state, will be
saved.

Update version to 2.0.18.
Signed-off-by: NMichael Chan <mchan@broadcom.com>
Reviewed-by: NBenjamin Li <mchan@broadcom.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
上级 22fa159d
......@@ -59,8 +59,8 @@
#include "bnx2_fw.h"
#define DRV_MODULE_NAME "bnx2"
#define DRV_MODULE_VERSION "2.0.17"
#define DRV_MODULE_RELDATE "July 18, 2010"
#define DRV_MODULE_VERSION "2.0.18"
#define DRV_MODULE_RELDATE "Oct 7, 2010"
#define FW_MIPS_FILE_06 "bnx2/bnx2-mips-06-6.0.15.fw"
#define FW_RV2P_FILE_06 "bnx2/bnx2-rv2p-06-6.0.15.fw"
#define FW_MIPS_FILE_09 "bnx2/bnx2-mips-09-6.0.17.fw"
......@@ -7915,16 +7915,7 @@ bnx2_init_board(struct pci_dev *pdev, struct net_device *dev)
goto err_out_disable;
}
/* AER (Advanced Error Reporting) hooks */
err = pci_enable_pcie_error_reporting(pdev);
if (err) {
dev_err(&pdev->dev, "pci_enable_pcie_error_reporting failed "
"0x%x\n", err);
/* non-fatal, continue */
}
pci_set_master(pdev);
pci_save_state(pdev);
bp->pm_cap = pci_find_capability(pdev, PCI_CAP_ID_PM);
if (bp->pm_cap == 0) {
......@@ -7979,6 +7970,15 @@ bnx2_init_board(struct pci_dev *pdev, struct net_device *dev)
bp->flags |= BNX2_FLAG_PCIE;
if (CHIP_REV(bp) == CHIP_REV_Ax)
bp->flags |= BNX2_FLAG_JUMBO_BROKEN;
/* AER (Advanced Error Reporting) hooks */
err = pci_enable_pcie_error_reporting(pdev);
if (err) {
dev_err(&pdev->dev, "pci_enable_pcie_error_reporting "
"failed 0x%x\n", err);
/* non-fatal, continue */
}
} else {
bp->pcix_cap = pci_find_capability(pdev, PCI_CAP_ID_PCIX);
if (bp->pcix_cap == 0) {
......@@ -8235,16 +8235,20 @@ bnx2_init_board(struct pci_dev *pdev, struct net_device *dev)
bp->timer.data = (unsigned long) bp;
bp->timer.function = bnx2_timer;
pci_save_state(pdev);
return 0;
err_out_unmap:
if (bp->flags & BNX2_FLAG_PCIE)
pci_disable_pcie_error_reporting(pdev);
if (bp->regview) {
iounmap(bp->regview);
bp->regview = NULL;
}
err_out_release:
pci_disable_pcie_error_reporting(pdev);
pci_release_regions(pdev);
err_out_disable:
......@@ -8434,9 +8438,10 @@ bnx2_remove_one(struct pci_dev *pdev)
kfree(bp->temp_stats_blk);
free_netdev(dev);
if (bp->flags & BNX2_FLAG_PCIE)
pci_disable_pcie_error_reporting(pdev);
pci_disable_pcie_error_reporting(pdev);
free_netdev(dev);
pci_release_regions(pdev);
pci_disable_device(pdev);
......@@ -8550,6 +8555,9 @@ static pci_ers_result_t bnx2_io_slot_reset(struct pci_dev *pdev)
}
rtnl_unlock();
if (!(bp->flags & BNX2_FLAG_PCIE))
return result;
err = pci_cleanup_aer_uncorrect_error_status(pdev);
if (err) {
dev_err(&pdev->dev,
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册