GenWQE: Add sysfs interface for bitstream reload

This patch adds an interface on sysfs for userspace to request a card
bitstream reload. It sets the appropriate register and try to perform a
fundamental reset on the PCIe slot for the card to reload the bitstream
from the chosen partition.
Signed-off-by: NKleber Sacilotto de Souza <klebers@linux.vnet.ibm.com>
Acked-by: NFrank Haverkamp <haver@linux.vnet.ibm.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Documentation/ABI/testing/sysfs-driver-genwqe

@@ -25,6 +25,15 @@ Date:           Oct 2013
 Contact:        haver@linux.vnet.ibm.com
 Description:    Interface to set the next bitstream to be used.
 
+What:           /sys/class/genwqe/genwqe<n>_card/reload_bitstream
+Date:           May 2014
+Contact:        klebers@linux.vnet.ibm.com
+Description:    Interface to trigger a PCIe card reset to reload the bitstream.
+                  sudo sh -c 'echo 1 > \
+                    /sys/class/genwqe/genwqe0_card/reload_bitstream'
+                If successfully, the card will come back with the bitstream set
+                on 'next_bitstream'.
+
 What:           /sys/class/genwqe/genwqe<n>_card/tempsens
 Date:           Oct 2013
 Contact:        haver@linux.vnet.ibm.com

drivers/misc/genwqe/card_base.c

@@ -760,6 +760,89 @@ static u64 genwqe_fir_checking(struct genwqe_dev *cd)
 	return IO_ILLEGAL_VALUE;
 }
 
+/**
+ * genwqe_pci_fundamental_reset() - trigger a PCIe fundamental reset on the slot
+ *
+ * Note: pci_set_pcie_reset_state() is not implemented on all archs, so this
+ * reset method will not work in all cases.
+ *
+ * Return: 0 on success or error code from pci_set_pcie_reset_state()
+ */
+static int genwqe_pci_fundamental_reset(struct pci_dev *pci_dev)
+{
+	int rc;
+
+	/*
+	 * lock pci config space access from userspace,
+	 * save state and issue PCIe fundamental reset
+	 */
+	pci_cfg_access_lock(pci_dev);
+	pci_save_state(pci_dev);
+	rc = pci_set_pcie_reset_state(pci_dev, pcie_warm_reset);
+	if (!rc) {
+		/* keep PCIe reset asserted for 250ms */
+		msleep(250);
+		pci_set_pcie_reset_state(pci_dev, pcie_deassert_reset);
+		/* Wait for 2s to reload flash and train the link */
+		msleep(2000);
+	}
+	pci_restore_state(pci_dev);
+	pci_cfg_access_unlock(pci_dev);
+	return rc;
+}
+
+/*
+ * genwqe_reload_bistream() - reload card bitstream
+ *
+ * Set the appropriate register and call fundamental reset to reaload the card
+ * bitstream.
+ *
+ * Return: 0 on success, error code otherwise
+ */
+static int genwqe_reload_bistream(struct genwqe_dev *cd)
+{
+	struct pci_dev *pci_dev = cd->pci_dev;
+	int rc;
+
+	dev_info(&pci_dev->dev,
+		 "[%s] resetting card for bitstream reload\n",
+		 __func__);
+
+	genwqe_stop(cd);
+
+	/*
+	 * Cause a CPLD reprogram with the 'next_bitstream'
+	 * partition on PCIe hot or fundamental reset
+	 */
+	__genwqe_writeq(cd, IO_SLC_CFGREG_SOFTRESET,
+			(cd->softreset & 0xcull) | 0x70ull);
+
+	rc = genwqe_pci_fundamental_reset(pci_dev);
+	if (rc) {
+		/*
+		 * A fundamental reset failure can be caused
+		 * by lack of support on the arch, so we just
+		 * log the error and try to start the card
+		 * again.
+		 */
+		dev_err(&pci_dev->dev,
+			"[%s] err: failed to reset card for bitstream reload\n",
+			__func__);
+	}
+
+	rc = genwqe_start(cd);
+	if (rc) {
+		dev_err(&pci_dev->dev,
+			"[%s] err: cannot start card services! (err=%d)\n",
+			__func__, rc);
+		return rc;
+	}
+	dev_info(&pci_dev->dev,
+		 "[%s] card reloaded\n", __func__);
+	return 0;
+}
+
+
 /**
  * genwqe_health_thread() - Health checking thread
  *
@@ -846,6 +929,13 @@ static int genwqe_health_thread(void *data)
 			}
 		}
 
+		if (cd->card_state == GENWQE_CARD_RELOAD_BITSTREAM) {
+			/* Userspace requested card bitstream reload */
+			rc = genwqe_reload_bistream(cd);
+			if (rc)
+				goto fatal_error;
+		}
+
 		cd->last_gfir = gfir;
 		cond_resched();
 	}

drivers/misc/genwqe/card_sysfs.c

@@ -223,6 +223,30 @@ static ssize_t next_bitstream_store(struct device *dev,
 }
 static DEVICE_ATTR_RW(next_bitstream);
 
+static ssize_t reload_bitstream_store(struct device *dev,
+				struct device_attribute *attr,
+				const char *buf, size_t count)
+{
+	int reload;
+	struct genwqe_dev *cd = dev_get_drvdata(dev);
+
+	if (kstrtoint(buf, 0, &reload) < 0)
+		return -EINVAL;
+
+	if (reload == 0x1) {
+		if (cd->card_state == GENWQE_CARD_UNUSED ||
+		    cd->card_state == GENWQE_CARD_USED)
+			cd->card_state = GENWQE_CARD_RELOAD_BITSTREAM;
+		else
+			return -EIO;
+	} else {
+		return -EINVAL;
+	}
+
+	return count;
+}
+static DEVICE_ATTR_WO(reload_bitstream);
+
 /*
  * Create device_attribute structures / params: name, mode, show, store
  * additional flag if valid in VF
@@ -239,6 +263,7 @@ static struct attribute *genwqe_attributes[] = {
 	&dev_attr_status.attr,
 	&dev_attr_freerunning_timer.attr,
 	&dev_attr_queue_working_time.attr,
+	&dev_attr_reload_bitstream.attr,
 	NULL,
 };
 

include/uapi/linux/genwqe/genwqe_card.h

@@ -328,6 +328,7 @@ enum genwqe_card_state {
 	GENWQE_CARD_UNUSED = 0,
 	GENWQE_CARD_USED = 1,
 	GENWQE_CARD_FATAL_ERROR = 2,
+	GENWQE_CARD_RELOAD_BITSTREAM = 3,
 	GENWQE_CARD_STATE_MAX,
 };