提交 c1f2955a 编写于 作者: M Martin Blumenstingl 提交者: Linus Walleij

pinctrl: meson: meson8: add the PWM pins

This adds the missing pins for the PWM controllers found in Amlogic
Meson8 SoCs. This includes the pins for PWM_A, PWM_B, PWM_C, PWM_D,
PWM_E and PWM_F controllers.
There is an additional PWM function with the name PWM_VS in the vendor
kernel sources which seems to be used for external video input. Thus
it's not part of this change as the IP block behind the pwm-meson driver
is not responsible for these pins.
Signed-off-by: NMartin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>
上级 cea234e9
......@@ -205,6 +205,9 @@ static const unsigned int i2c_sck_d0_pins[] = { PIN(GPIOX_17, 0) };
static const unsigned int xtal_32k_out_pins[] = { PIN(GPIOX_10, 0) };
static const unsigned int xtal_24m_out_pins[] = { PIN(GPIOX_11, 0) };
static const unsigned int pwm_e_pins[] = { PIN(GPIOX_10, 0) };
static const unsigned int pwm_b_x_pins[] = { PIN(GPIOX_11, 0) };
/* bank Y */
static const unsigned int uart_tx_c_pins[] = { PIN(GPIOY_0, 0) };
static const unsigned int uart_rx_c_pins[] = { PIN(GPIOY_1, 0) };
......@@ -219,6 +222,8 @@ static const unsigned int pcm_clk_b_pins[] = { PIN(GPIOY_7, 0) };
static const unsigned int i2c_sda_c0_pins[] = { PIN(GPIOY_0, 0) };
static const unsigned int i2c_sck_c0_pins[] = { PIN(GPIOY_1, 0) };
static const unsigned int pwm_a_y_pins[] = { PIN(GPIOY_16, 0) };
/* bank DV */
static const unsigned int dvin_rgb_pins[] = { PIN(GPIODV_0, 0), PIN(GPIODV_1, 0),
PIN(GPIODV_2, 0), PIN(GPIODV_3, 0),
......@@ -264,6 +269,10 @@ static const unsigned int uart_rts_b1_pins[] = { PIN(GPIODV_27, 0) };
static const unsigned int vga_vs_pins[] = { PIN(GPIODV_24, 0) };
static const unsigned int vga_hs_pins[] = { PIN(GPIODV_25, 0) };
static const unsigned int pwm_c_dv9_pins[] = { PIN(GPIODV_9, 0) };
static const unsigned int pwm_c_dv29_pins[] = { PIN(GPIODV_29, 0) };
static const unsigned int pwm_d_pins[] = { PIN(GPIODV_28, 0) };
/* bank H */
static const unsigned int hdmi_hpd_pins[] = { PIN(GPIOH_0, 0) };
static const unsigned int hdmi_sda_pins[] = { PIN(GPIOH_1, 0) };
......@@ -312,6 +321,11 @@ static const unsigned int i2c_sck_a1_pins[] = { PIN(GPIOZ_1, 0) };
static const unsigned int i2c_sda_a2_pins[] = { PIN(GPIOZ_0, 0) };
static const unsigned int i2c_sck_a2_pins[] = { PIN(GPIOZ_1, 0) };
static const unsigned int pwm_a_z0_pins[] = { PIN(GPIOZ_0, 0) };
static const unsigned int pwm_a_z7_pins[] = { PIN(GPIOZ_7, 0) };
static const unsigned int pwm_b_z_pins[] = { PIN(GPIOZ_1, 0) };
static const unsigned int pwm_c_z_pins[] = { PIN(GPIOZ_8, 0) };
/* bank BOOT */
static const unsigned int sd_d0_c_pins[] = { PIN(BOOT_0, 0) };
static const unsigned int sd_d1_c_pins[] = { PIN(BOOT_1, 0) };
......@@ -382,6 +396,8 @@ static const unsigned int uart_rx_ao_b1_pins[] = { PIN(GPIOAO_5, AO_OFF) };
static const unsigned int i2c_mst_sck_ao_pins[] = { PIN(GPIOAO_4, AO_OFF) };
static const unsigned int i2c_mst_sda_ao_pins[] = { PIN(GPIOAO_5, AO_OFF) };
static const unsigned int pwm_f_ao_pins[] = { PIN(GPIO_TEST_N, AO_OFF) };
static struct meson_pmx_group meson8_cbus_groups[] = {
GPIO_GROUP(GPIOX_0, 0),
GPIO_GROUP(GPIOX_1, 0),
......@@ -523,6 +539,9 @@ static struct meson_pmx_group meson8_cbus_groups[] = {
GROUP(xtal_32k_out, 3, 22),
GROUP(xtal_24m_out, 3, 23),
GROUP(pwm_e, 9, 19),
GROUP(pwm_b_x, 2, 3),
/* bank Y */
GROUP(uart_tx_c, 1, 19),
GROUP(uart_rx_c, 1, 18),
......@@ -537,6 +556,8 @@ static struct meson_pmx_group meson8_cbus_groups[] = {
GROUP(i2c_sda_c0, 1, 15),
GROUP(i2c_sck_c0, 1, 14),
GROUP(pwm_a_y, 9, 14),
/* bank DV */
GROUP(dvin_rgb, 0, 6),
GROUP(dvin_vs, 0, 9),
......@@ -571,6 +592,10 @@ static struct meson_pmx_group meson8_cbus_groups[] = {
GROUP(vga_vs, 0, 21),
GROUP(vga_hs, 0, 20),
GROUP(pwm_c_dv9, 3, 24),
GROUP(pwm_c_dv29, 3, 25),
GROUP(pwm_d, 3, 26),
/* bank H */
GROUP(hdmi_hpd, 1, 26),
GROUP(hdmi_sda, 1, 25),
......@@ -619,6 +644,11 @@ static struct meson_pmx_group meson8_cbus_groups[] = {
GROUP(i2c_sda_a2, 5, 7),
GROUP(i2c_sck_a2, 5, 6),
GROUP(pwm_a_z0, 9, 16),
GROUP(pwm_a_z7, 2, 0),
GROUP(pwm_b_z, 9, 15),
GROUP(pwm_c_z, 2, 1),
/* bank BOOT */
GROUP(sd_d0_c, 6, 29),
GROUP(sd_d1_c, 6, 28),
......@@ -701,6 +731,8 @@ static struct meson_pmx_group meson8_aobus_groups[] = {
GROUP(i2c_mst_sck_ao, 0, 6),
GROUP(i2c_mst_sda_ao, 0, 5),
GROUP(pwm_f_ao, 0, 19),
};
static const char * const gpio_groups[] = {
......@@ -849,6 +881,26 @@ static const char * const nor_groups[] = {
"nor_d", "nor_q", "nor_c", "nor_cs"
};
static const char * const pwm_a_groups[] = {
"pwm_a_y", "pwm_a_z0", "pwm_a_z7"
};
static const char * const pwm_b_groups[] = {
"pwm_b_x", "pwm_b_z"
};
static const char * const pwm_c_groups[] = {
"pwm_c_dv9", "pwm_c_dv29", "pwm_c_z"
};
static const char * const pwm_d_groups[] = {
"pwm_d"
};
static const char * const pwm_e_groups[] = {
"pwm_e"
};
static const char * const sd_b_groups[] = {
"sd_d1_b", "sd_d0_b", "sd_clk_b", "sd_cmd_b",
"sd_d3_b", "sd_d2_b"
......@@ -878,6 +930,10 @@ static const char * const i2c_mst_ao_groups[] = {
"i2c_mst_sck_ao", "i2c_mst_sda_ao"
};
static const char * const pwm_f_ao_groups[] = {
"pwm_f_ao"
};
static struct meson_pmx_func meson8_cbus_functions[] = {
FUNCTION(gpio),
FUNCTION(sd_a),
......@@ -905,6 +961,11 @@ static struct meson_pmx_func meson8_cbus_functions[] = {
FUNCTION(nor),
FUNCTION(sd_b),
FUNCTION(sdxc_b),
FUNCTION(pwm_a),
FUNCTION(pwm_b),
FUNCTION(pwm_c),
FUNCTION(pwm_d),
FUNCTION(pwm_e),
};
static struct meson_pmx_func meson8_aobus_functions[] = {
......@@ -913,6 +974,7 @@ static struct meson_pmx_func meson8_aobus_functions[] = {
FUNCTION(i2c_slave_ao),
FUNCTION(uart_ao_b),
FUNCTION(i2c_mst_ao),
FUNCTION(pwm_f_ao),
};
static struct meson_bank meson8_cbus_banks[] = {
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册