USB: ftdi_sio: added CS5 quirk for broken smartcard readers

Genuine FTDI chips support only CS7/8. A previous fix in commit
8704211f ("USB: ftdi_sio: fixed handling of unsupported CSIZE
setting") enforced this limitation and reported it back to userspace.

However, certain types of smartcard readers depend on specific
driver behaviour that requests 0 data bits (not 5) to change into a
different operating mode if CS5 has been set.

This patch reenables this behaviour for all FTDI devices.

Tagged to be added to stable, because it affects a lot of users of
embedded systems which rely on these readers to work properly.

Cc: stable <stable@vger.kernel.org>
Reported-by: NHeinrich Siebmanns <H.Siebmanns@t-online.de>
Tested-by: NHeinrich Siebmanns <H.Siebmanns@t-online.de>
Signed-off-by: NColin Leitner <colin.leitner@gmail.com>
Signed-off-by: NJohan Hovold <jhovold@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

drivers/usb/serial/ftdi_sio.c

@@ -2121,10 +2121,20 @@ static void ftdi_set_termios(struct tty_struct *tty,
 	}
 
 	/*
-	 * All FTDI UART chips are limited to CS7/8. We won't pretend to
+	 * All FTDI UART chips are limited to CS7/8. We shouldn't pretend to
 	 * support CS5/6 and revert the CSIZE setting instead.
+	 *
+	 * CS5 however is used to control some smartcard readers which abuse
+	 * this limitation to switch modes. Original FTDI chips fall back to
+	 * eight data bits.
+	 *
+	 * TODO: Implement a quirk to only allow this with mentioned
+	 *       readers. One I know of (Argolis Smartreader V1)
+	 *       returns "USB smartcard server" as iInterface string.
+	 *       The vendor didn't bother with a custom VID/PID of
+	 *       course.
 	 */
-	if ((C_CSIZE(tty) != CS8) && (C_CSIZE(tty) != CS7)) {
+	if (C_CSIZE(tty) == CS6) {
 		dev_warn(ddev, "requested CSIZE setting not supported\n");
 
 		termios->c_cflag &= ~CSIZE;
@@ -2171,6 +2181,9 @@ static void ftdi_set_termios(struct tty_struct *tty,
 		urb_value |= FTDI_SIO_SET_DATA_PARITY_NONE;
 	}
 	switch (cflag & CSIZE) {
+	case CS5:
+		dev_dbg(ddev, "Setting CS5 quirk\n");
+		break;
 	case CS7:
 		urb_value |= 7;
 		dev_dbg(ddev, "Setting CS7\n");