提交 c0e45c1c 编写于 作者: F françois romieu 提交者: David S. Miller

r8169: 8168DP specific MII registers access methods.

Adapted from version 8.019.00 of Realtek's r8168 driver and
amended per Hayes Wang's correction :
- OCPDR_GPHY_REG_SHIFT must be 16, not 12
- the reg should be at bit 16 ~ 22, whence OCPDR_REG_MASK
Signed-off-by: NFrancois Romieu <romieu@fr.zoreil.com>
Cc: Hayes <hayeswang@realtek.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
上级 4da19633
......@@ -277,6 +277,20 @@ enum rtl8168_8101_registers {
#define EFUSEAR_DATA_MASK 0xff
};
enum rtl8168_registers {
EPHY_RXER_NUM = 0x7c,
OCPDR = 0xb0, /* OCP GPHY access */
#define OCPDR_WRITE_CMD 0x80000000
#define OCPDR_READ_CMD 0x00000000
#define OCPDR_REG_MASK 0x7f
#define OCPDR_GPHY_REG_SHIFT 16
#define OCPDR_DATA_MASK 0xffff
OCPAR = 0xb4,
#define OCPAR_FLAG 0x80000000
#define OCPAR_GPHY_WRITE_CMD 0x8000f060
#define OCPAR_GPHY_READ_CMD 0x0000f060
};
enum rtl_register_content {
/* InterruptStatusBits */
SYSErr = 0x8000,
......@@ -500,6 +514,12 @@ struct rtl8169_private {
#ifdef CONFIG_R8169_VLAN
struct vlan_group *vlgrp;
#endif
struct mdio_ops {
void (*write)(void __iomem *, int, int);
int (*read)(void __iomem *, int);
} mdio_ops;
int (*set_speed)(struct net_device *, u8 autoneg, u16 speed, u8 duplex);
int (*get_settings)(struct net_device *, struct ethtool_cmd *);
void (*phy_reset_enable)(struct rtl8169_private *tp);
......@@ -595,14 +615,55 @@ static int r8169_mdio_read(void __iomem *ioaddr, int reg_addr)
return value;
}
static void r8168dp_1_mdio_access(void __iomem *ioaddr, int reg_addr, u32 data)
{
int i;
RTL_W32(OCPDR, data |
((reg_addr & OCPDR_REG_MASK) << OCPDR_GPHY_REG_SHIFT));
RTL_W32(OCPAR, OCPAR_GPHY_WRITE_CMD);
RTL_W32(EPHY_RXER_NUM, 0);
for (i = 0; i < 100; i++) {
mdelay(1);
if (!(RTL_R32(OCPAR) & OCPAR_FLAG))
break;
}
}
static void r8168dp_1_mdio_write(void __iomem *ioaddr, int reg_addr, int value)
{
r8168dp_1_mdio_access(ioaddr, reg_addr, OCPDR_WRITE_CMD |
(value & OCPDR_DATA_MASK));
}
static int r8168dp_1_mdio_read(void __iomem *ioaddr, int reg_addr)
{
int i;
r8168dp_1_mdio_access(ioaddr, reg_addr, OCPDR_READ_CMD);
mdelay(1);
RTL_W32(OCPAR, OCPAR_GPHY_READ_CMD);
RTL_W32(EPHY_RXER_NUM, 0);
for (i = 0; i < 100; i++) {
mdelay(1);
if (RTL_R32(OCPAR) & OCPAR_FLAG)
break;
}
return RTL_R32(OCPDR) & OCPDR_DATA_MASK;
}
static void rtl_writephy(struct rtl8169_private *tp, int location, u32 val)
{
r8169_mdio_write(tp->mmio_addr, location, val);
tp->mdio_ops.write(tp->mmio_addr, location, val);
}
static int rtl_readphy(struct rtl8169_private *tp, int location)
{
return r8169_mdio_read(tp->mmio_addr, location);
return tp->mdio_ops.read(tp->mmio_addr, location);
}
static void rtl_patchphy(struct rtl8169_private *tp, int reg_addr, int value)
......@@ -2474,6 +2535,22 @@ static const struct net_device_ops rtl8169_netdev_ops = {
};
static void __devinit rtl_init_mdio_ops(struct rtl8169_private *tp)
{
struct mdio_ops *ops = &tp->mdio_ops;
switch (tp->mac_version) {
case RTL_GIGA_MAC_VER_27:
ops->write = r8168dp_1_mdio_write;
ops->read = r8168dp_1_mdio_read;
break;
default:
ops->write = r8169_mdio_write;
ops->read = r8169_mdio_read;
break;
}
}
static int __devinit
rtl8169_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
{
......@@ -2592,6 +2669,8 @@ rtl8169_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
/* Identify chip attached to board */
rtl8169_get_mac_version(tp, ioaddr);
rtl_init_mdio_ops(tp);
/* Use appropriate default if unknown */
if (tp->mac_version == RTL_GIGA_MAC_NONE) {
netif_notice(tp, probe, dev,
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册