提交 c002831a 编写于 作者: R Rafał Miłecki 提交者: John W. Linville

b43: N-PHY: use helper for checking IPA

Signed-off-by: NRafał Miłecki <zajec5@gmail.com>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
上级 7827493b
......@@ -89,6 +89,13 @@ static void b43_nphy_rf_control_override(struct b43_wldev *dev, u16 field,
static void b43_nphy_rf_control_intc_override(struct b43_wldev *dev, u8 field,
u16 value, u8 core);
static inline bool b43_nphy_ipa(struct b43_wldev *dev)
{
enum ieee80211_band band = b43_current_band(dev->wl);
return ((dev->phy.n->ipa2g_on && band == IEEE80211_BAND_2GHZ) ||
(dev->phy.n->ipa5g_on && band == IEEE80211_BAND_5GHZ));
}
void b43_nphy_set_rxantenna(struct b43_wldev *dev, int antenna)
{//TODO
}
......@@ -353,8 +360,7 @@ static void b43_nphy_tx_power_ctrl(struct b43_wldev *dev, bool enable)
if (dev->phy.rev < 2 && dev->phy.is_40mhz)
b43_hf_write(dev, b43_hf_read(dev) & ~B43_HF_TSSIRPSMW);
if ((nphy->ipa2g_on && band == IEEE80211_BAND_2GHZ) ||
(nphy->ipa5g_on && band == IEEE80211_BAND_5GHZ)) {
if (b43_nphy_ipa(dev)) {
b43_phy_mask(dev, B43_NPHY_PAPD_EN0, ~0x4);
b43_phy_mask(dev, B43_NPHY_PAPD_EN1, ~0x4);
}
......@@ -650,14 +656,10 @@ static void b43_nphy_pa_override(struct b43_wldev *dev, bool enable)
/* http://bcm-v4.sipsolutions.net/802.11/PHY/N/TxLpFbw */
static void b43_nphy_tx_lp_fbw(struct b43_wldev *dev)
{
struct b43_phy_n *nphy = dev->phy.n;
u16 tmp;
enum ieee80211_band band = b43_current_band(dev->wl);
bool ipa = (nphy->ipa2g_on && band == IEEE80211_BAND_2GHZ) ||
(nphy->ipa5g_on && band == IEEE80211_BAND_5GHZ);
if (dev->phy.rev >= 3) {
if (ipa) {
if (b43_nphy_ipa(dev)) {
tmp = 4;
b43_phy_write(dev, B43_NPHY_TXF_40CO_B32S2,
(((((tmp << 3) | tmp) << 3) | tmp) << 3) | tmp);
......@@ -2204,7 +2206,6 @@ static void b43_nphy_rev2_rssi_select(struct b43_wldev *dev, u8 code, u8 type)
static void b43_nphy_rev3_rssi_select(struct b43_wldev *dev, u8 code, u8 type)
{
struct b43_phy_n *nphy = dev->phy.n;
u8 i;
u16 reg, val;
......@@ -2268,10 +2269,7 @@ static void b43_nphy_rev3_rssi_select(struct b43_wldev *dev, u8 code, u8 type)
enum ieee80211_band band =
b43_current_band(dev->wl);
if ((nphy->ipa2g_on &&
band == IEEE80211_BAND_2GHZ) ||
(nphy->ipa5g_on &&
band == IEEE80211_BAND_5GHZ))
if (b43_nphy_ipa(dev))
val = (band == IEEE80211_BAND_5GHZ) ? 0xC : 0xE;
else
val = 0x11;
......@@ -2897,10 +2895,7 @@ static struct nphy_txgains b43_nphy_get_tx_gains(struct b43_wldev *dev)
enum ieee80211_band band =
b43_current_band(dev->wl);
if ((nphy->ipa2g_on &&
band == IEEE80211_BAND_2GHZ) ||
(nphy->ipa5g_on &&
band == IEEE80211_BAND_5GHZ)) {
if (b43_nphy_ipa(dev)) {
table = b43_nphy_get_ipa_gain_table(dev);
} else {
if (band == IEEE80211_BAND_5GHZ) {
......@@ -3736,8 +3731,7 @@ int b43_phy_initn(struct b43_wldev *dev)
}
tmp2 = b43_current_band(dev->wl);
if ((nphy->ipa2g_on && tmp2 == IEEE80211_BAND_2GHZ) ||
(nphy->ipa5g_on && tmp2 == IEEE80211_BAND_5GHZ)) {
if (b43_nphy_ipa(dev)) {
b43_phy_set(dev, B43_NPHY_PAPD_EN0, 0x1);
b43_phy_maskset(dev, B43_NPHY_EPS_TABLE_ADJ0, 0x007F,
nphy->papd_epsilon_offset[0] << 7);
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册