KVM: PPC: rename CONFIG_KVM_E500 -> CONFIG_KVM_E500V2

The CONFIG_KVM_E500 option really indicates that we're running on a V2 machine,
not on a machine of the generic E500 class. So indicate that properly and
change the config name accordingly.
Signed-off-by: NAlexander Graf <agraf@suse.de>
Signed-off-by: NAvi Kivity <avi@redhat.com>

arch/powerpc/kvm/Kconfig

@@ -109,7 +109,7 @@ config KVM_440
 
 config KVM_EXIT_TIMING
 	bool "Detailed exit timing"
-	depends on KVM_440 || KVM_E500 || KVM_E500MC
+	depends on KVM_440 || KVM_E500V2 || KVM_E500MC
 	---help---
 	  Calculate elapsed time for every exit/enter cycle. A per-vcpu
 	  report is available in debugfs kvm/vm#_vcpu#_timing.
@@ -118,14 +118,14 @@ config KVM_EXIT_TIMING
 
 	  If unsure, say N.
 
-config KVM_E500
-	bool "KVM support for PowerPC E500 processors"
+config KVM_E500V2
+	bool "KVM support for PowerPC E500v2 processors"
 	depends on EXPERIMENTAL && E500
 	select KVM
 	select KVM_MMIO
 	---help---
 	  Support running unmodified E500 guest kernels in virtual machines on
-	  E500 host processors.
+	  E500v2 host processors.
 
 	  This module provides access to the hardware capabilities through
 	  a character device node named /dev/kvm.

arch/powerpc/kvm/Makefile

@@ -36,7 +36,7 @@ kvm-e500-objs := \
 	e500.o \
 	e500_tlb.o \
 	e500_emulate.o
-kvm-objs-$(CONFIG_KVM_E500) := $(kvm-e500-objs)
+kvm-objs-$(CONFIG_KVM_E500V2) := $(kvm-e500-objs)
 
 kvm-e500mc-objs := \
 	$(common-objs-y) \
@@ -98,7 +98,7 @@ kvm-objs-$(CONFIG_KVM_BOOK3S_32) := $(kvm-book3s_32-objs)
 kvm-objs := $(kvm-objs-m) $(kvm-objs-y)
 
 obj-$(CONFIG_KVM_440) += kvm.o
-obj-$(CONFIG_KVM_E500) += kvm.o
+obj-$(CONFIG_KVM_E500V2) += kvm.o
 obj-$(CONFIG_KVM_E500MC) += kvm.o
 obj-$(CONFIG_KVM_BOOK3S_64) += kvm.o
 obj-$(CONFIG_KVM_BOOK3S_32) += kvm.o

arch/powerpc/kvm/booke.c

@@ -762,7 +762,7 @@ int kvmppc_handle_exit(struct kvm_run *run, struct kvm_vcpu *vcpu,
 		gpa_t gpaddr;
 		gfn_t gfn;
 
-#ifdef CONFIG_KVM_E500
+#ifdef CONFIG_KVM_E500V2
 		if (!(vcpu->arch.shared->msr & MSR_PR) &&
 		    (eaddr & PAGE_MASK) == vcpu->arch.magic_page_ea) {
 			kvmppc_map_magic(vcpu);

arch/powerpc/kvm/e500.h

@@ -39,7 +39,7 @@ struct tlbe_priv {
 	struct tlbe_ref ref; /* TLB0 only -- TLB1 uses tlb_refs */
 };
 
-#ifdef CONFIG_KVM_E500
+#ifdef CONFIG_KVM_E500V2
 struct vcpu_id_table;
 #endif
 
@@ -89,7 +89,7 @@ struct kvmppc_vcpu_e500 {
 	u64 *g2h_tlb1_map;
 	unsigned int *h2g_tlb1_rmap;
 
-#ifdef CONFIG_KVM_E500
+#ifdef CONFIG_KVM_E500V2
 	u32 pid[E500_PID_NUM];
 
 	/* vcpu id table */
@@ -136,7 +136,7 @@ void kvmppc_get_sregs_e500_tlb(struct kvm_vcpu *vcpu, struct kvm_sregs *sregs);
 int kvmppc_set_sregs_e500_tlb(struct kvm_vcpu *vcpu, struct kvm_sregs *sregs);
 
 
-#ifdef CONFIG_KVM_E500
+#ifdef CONFIG_KVM_E500V2
 unsigned int kvmppc_e500_get_sid(struct kvmppc_vcpu_e500 *vcpu_e500,
 				 unsigned int as, unsigned int gid,
 				 unsigned int pr, int avoid_recursion);

arch/powerpc/kvm/e500_tlb.c

@@ -156,7 +156,7 @@ static inline void write_host_tlbe(struct kvmppc_vcpu_e500 *vcpu_e500,
 	}
 }
 
-#ifdef CONFIG_KVM_E500
+#ifdef CONFIG_KVM_E500V2
 void kvmppc_map_magic(struct kvm_vcpu *vcpu)
 {
 	struct kvmppc_vcpu_e500 *vcpu_e500 = to_e500(vcpu);

arch/powerpc/kvm/powerpc.c

@@ -79,7 +79,7 @@ int kvmppc_kvm_pv(struct kvm_vcpu *vcpu)
 	}
 	case HC_VENDOR_KVM | KVM_HC_FEATURES:
 		r = HC_EV_SUCCESS;
-#if defined(CONFIG_PPC_BOOK3S) || defined(CONFIG_KVM_E500)
+#if defined(CONFIG_PPC_BOOK3S) || defined(CONFIG_KVM_E500V2)
 		/* XXX Missing magic page on 44x */
 		r2 |= (1 << KVM_FEATURE_MAGIC_PAGE);
 #endif
@@ -235,7 +235,7 @@ int kvm_dev_ioctl_check_extension(long ext)
 	case KVM_CAP_PPC_PAIRED_SINGLES:
 	case KVM_CAP_PPC_OSI:
 	case KVM_CAP_PPC_GET_PVINFO:
-#if defined(CONFIG_KVM_E500) || defined(CONFIG_KVM_E500MC)
+#if defined(CONFIG_KVM_E500V2) || defined(CONFIG_KVM_E500MC)
 	case KVM_CAP_SW_TLB:
 #endif
 		r = 1;
@@ -629,7 +629,7 @@ static int kvm_vcpu_ioctl_enable_cap(struct kvm_vcpu *vcpu,
 		r = 0;
 		vcpu->arch.papr_enabled = true;
 		break;
-#if defined(CONFIG_KVM_E500) || defined(CONFIG_KVM_E500MC)
+#if defined(CONFIG_KVM_E500V2) || defined(CONFIG_KVM_E500MC)
 	case KVM_CAP_SW_TLB: {
 		struct kvm_config_tlb cfg;
 		void __user *user_ptr = (void __user *)(uintptr_t)cap->args[0];
@@ -706,7 +706,7 @@ long kvm_arch_vcpu_ioctl(struct file *filp,
 		break;
 	}
 
-#if defined(CONFIG_KVM_E500) || defined(CONFIG_KVM_E500MC)
+#if defined(CONFIG_KVM_E500V2) || defined(CONFIG_KVM_E500MC)
 	case KVM_DIRTY_TLB: {
 		struct kvm_dirty_tlb dirty;
 		r = -EFAULT;