ARM: dts: armada-385-linksys: partition layout is board specific

Move the partition layout to individual boards. The Linksys WRT 3200 ACM
(Rango) comes with a 256MiB nand flash chip and different layout.
Signed-off-by: NRalph Sennhauser <ralph.sennhauser@gmail.com>
Signed-off-by: NImre Kaloz <kaloz@openwrt.org>
Reviewed-by: NAndrew Lunn <andrew@lunn.ch>
Signed-off-by: NGregory CLEMENT <gregory.clement@free-electrons.com>

arch/arm/boot/dts/armada-385-linksys-caiman.dts

@@ -102,3 +102,70 @@
 		label = "caiman:white:sata";
 	};
 };
+
+&nand {
+	/* 128MiB */
+
+	partition@0 {
+		label = "u-boot";
+		reg = <0x0000000 0x200000>;  /* 2MiB */
+		read-only;
+	};
+
+	partition@100000 {
+		label = "u_env";
+		reg = <0x200000 0x40000>;    /* 256KiB */
+	};
+
+	partition@140000 {
+		label = "s_env";
+		reg = <0x240000 0x40000>;    /* 256KiB */
+	};
+
+	partition@900000 {
+		label = "devinfo";
+		reg = <0x900000 0x100000>;   /* 1MiB */
+		read-only;
+	};
+
+	/* kernel1 overlaps with rootfs1 by design */
+	partition@a00000 {
+		label = "kernel1";
+		reg = <0xa00000 0x2800000>;  /* 40MiB */
+	};
+
+	partition@1000000 {
+		label = "rootfs1";
+		reg = <0x1000000 0x2200000>;  /* 34MiB */
+	};
+
+	/* kernel2 overlaps with rootfs2 by design */
+	partition@3200000 {
+		label = "kernel2";
+		reg = <0x3200000 0x2800000>; /* 40MiB */
+	};
+
+	partition@3800000 {
+		label = "rootfs2";
+		reg = <0x3800000 0x2200000>; /* 34MiB */
+	};
+
+	/*
+	 * 38MiB, last MiB is for the BBT, not writable
+	 */
+	partition@5a00000 {
+		label = "syscfg";
+		reg = <0x5a00000 0x2600000>;
+	};
+
+	/*
+	 * Unused area between "s_env" and "devinfo".
+	 * Moved here because otherwise the renumbered
+	 * partitions would break the bootloader
+	 * supplied bootargs
+	 */
+	partition@180000 {
+		label = "unused_area";
+		reg = <0x280000 0x680000>;   /* 6.5MiB */
+	};
+};

arch/arm/boot/dts/armada-385-linksys-cobra.dts

@@ -102,3 +102,70 @@
 		label = "cobra:white:sata";
 	};
 };
+
+&nand {
+	/* 128MiB */
+
+	partition@0 {
+		label = "u-boot";
+		reg = <0x0000000 0x200000>;  /* 2MiB */
+		read-only;
+	};
+
+	partition@100000 {
+		label = "u_env";
+		reg = <0x200000 0x40000>;    /* 256KiB */
+	};
+
+	partition@140000 {
+		label = "s_env";
+		reg = <0x240000 0x40000>;    /* 256KiB */
+	};
+
+	partition@900000 {
+		label = "devinfo";
+		reg = <0x900000 0x100000>;   /* 1MiB */
+		read-only;
+	};
+
+	/* kernel1 overlaps with rootfs1 by design */
+	partition@a00000 {
+		label = "kernel1";
+		reg = <0xa00000 0x2800000>;  /* 40MiB */
+	};
+
+	partition@1000000 {
+		label = "rootfs1";
+		reg = <0x1000000 0x2200000>;  /* 34MiB */
+	};
+
+	/* kernel2 overlaps with rootfs2 by design */
+	partition@3200000 {
+		label = "kernel2";
+		reg = <0x3200000 0x2800000>; /* 40MiB */
+	};
+
+	partition@3800000 {
+		label = "rootfs2";
+		reg = <0x3800000 0x2200000>; /* 34MiB */
+	};
+
+	/*
+	 * 38MiB, last MiB is for the BBT, not writable
+	 */
+	partition@5a00000 {
+		label = "syscfg";
+		reg = <0x5a00000 0x2600000>;
+	};
+
+	/*
+	 * Unused area between "s_env" and "devinfo".
+	 * Moved here because otherwise the renumbered
+	 * partitions would break the bootloader
+	 * supplied bootargs
+	 */
+	partition@180000 {
+		label = "unused_area";
+		reg = <0x280000 0x680000>;   /* 6.5MiB */
+	};
+};

arch/arm/boot/dts/armada-385-linksys-shelby.dts

@@ -102,3 +102,70 @@
 		label = "shelby:white:sata";
 	};
 };
+
+&nand {
+	/* 128MiB */
+
+	partition@0 {
+		label = "u-boot";
+		reg = <0x0000000 0x200000>;  /* 2MiB */
+		read-only;
+	};
+
+	partition@100000 {
+		label = "u_env";
+		reg = <0x200000 0x40000>;    /* 256KiB */
+	};
+
+	partition@140000 {
+		label = "s_env";
+		reg = <0x240000 0x40000>;    /* 256KiB */
+	};
+
+	partition@900000 {
+		label = "devinfo";
+		reg = <0x900000 0x100000>;   /* 1MiB */
+		read-only;
+	};
+
+	/* kernel1 overlaps with rootfs1 by design */
+	partition@a00000 {
+		label = "kernel1";
+		reg = <0xa00000 0x2800000>;  /* 40MiB */
+	};
+
+	partition@1000000 {
+		label = "rootfs1";
+		reg = <0x1000000 0x2200000>;  /* 34MiB */
+	};
+
+	/* kernel2 overlaps with rootfs2 by design */
+	partition@3200000 {
+		label = "kernel2";
+		reg = <0x3200000 0x2800000>; /* 40MiB */
+	};
+
+	partition@3800000 {
+		label = "rootfs2";
+		reg = <0x3800000 0x2200000>; /* 34MiB */
+	};
+
+	/*
+	 * 38MiB, last MiB is for the BBT, not writable
+	 */
+	partition@5a00000 {
+		label = "syscfg";
+		reg = <0x5a00000 0x2600000>;
+	};
+
+	/*
+	 * Unused area between "s_env" and "devinfo".
+	 * Moved here because otherwise the renumbered
+	 * partitions would break the bootloader
+	 * supplied bootargs
+	 */
+	partition@180000 {
+		label = "unused_area";
+		reg = <0x280000 0x680000>;   /* 6.5MiB */
+	};
+};

arch/arm/boot/dts/armada-385-linksys.dtsi

@@ -172,74 +172,12 @@
 };
 
 &nand {
+	/* 128MiB or 256MiB */
 	status = "okay";
 	num-cs = <1>;
 	marvell,nand-keep-config;
 	marvell,nand-enable-arbiter;
 	nand-on-flash-bbt;
-
-	partition@0 {
-		label = "u-boot";
-		reg = <0x0000000 0x200000>;  /* 2MiB */
-		read-only;
-	};
-
-	partition@100000 {
-		label = "u_env";
-		reg = <0x200000 0x40000>;    /* 256KiB */
-	};
-
-	partition@140000 {
-		label = "s_env";
-		reg = <0x240000 0x40000>;    /* 256KiB */
-	};
-
-	partition@900000 {
-		label = "devinfo";
-		reg = <0x900000 0x100000>;   /* 1MiB */
-		read-only;
-	};
-
-	/* kernel1 overlaps with rootfs1 by design */
-	partition@a00000 {
-		label = "kernel1";
-		reg = <0xa00000 0x2800000>;  /* 40MiB */
-	};
-
-	partition@1000000 {
-		label = "rootfs1";
-		reg = <0x1000000 0x2200000>;  /* 34MiB */
-	};
-
-	/* kernel2 overlaps with rootfs2 by design */
-	partition@3200000 {
-		label = "kernel2";
-		reg = <0x3200000 0x2800000>; /* 40MiB */
-	};
-
-	partition@3800000 {
-		label = "rootfs2";
-		reg = <0x3800000 0x2200000>; /* 34MiB */
-	};
-
-	/*
-	 * 38MiB, last MiB is for the BBT, not writable
-	 */
-	partition@5a00000 {
-		label = "syscfg";
-		reg = <0x5a00000 0x2600000>;
-	};
-
-	/*
-	 * Unused area between "s_env" and "devinfo".
-	 * Moved here because otherwise the renumbered
-	 * partitions would break the bootloader
-	 * supplied bootargs
-	 */
-	partition@180000 {
-		label = "unused_area";
-		reg = <0x280000 0x680000>;   /* 6.5MiB */
-	};
 };
 
 &mdio {