提交 bf564ea9 编写于 作者: M Mark Brown

Merge branch 'for-3.0' into for-3.1

......@@ -680,20 +680,25 @@ static struct snd_soc_dai_ops wm8804_dai_ops = {
#define WM8804_FORMATS (SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_S20_3LE | \
SNDRV_PCM_FMTBIT_S24_LE)
#define WM8804_RATES (SNDRV_PCM_RATE_32000 | SNDRV_PCM_RATE_44100 | \
SNDRV_PCM_RATE_48000 | SNDRV_PCM_RATE_64000 | \
SNDRV_PCM_RATE_88200 | SNDRV_PCM_RATE_96000 | \
SNDRV_PCM_RATE_176400 | SNDRV_PCM_RATE_192000)
static struct snd_soc_dai_driver wm8804_dai = {
.name = "wm8804-spdif",
.playback = {
.stream_name = "Playback",
.channels_min = 2,
.channels_max = 2,
.rates = SNDRV_PCM_RATE_8000_192000,
.rates = WM8804_RATES,
.formats = WM8804_FORMATS,
},
.capture = {
.stream_name = "Capture",
.channels_min = 2,
.channels_max = 2,
.rates = SNDRV_PCM_RATE_8000_192000,
.rates = WM8804_RATES,
.formats = WM8804_FORMATS,
},
.ops = &wm8804_dai_ops,
......
......@@ -312,7 +312,7 @@ static int fsl_dma_new(struct snd_soc_pcm_runtime *rtd)
* should allocate a DMA buffer only for the streams that are valid.
*/
if (dai->driver->playback.channels_min) {
if (pcm->streams[0].substream) {
ret = snd_dma_alloc_pages(SNDRV_DMA_TYPE_DEV, card->dev,
fsl_dma_hardware.buffer_bytes_max,
&pcm->streams[0].substream->dma_buffer);
......@@ -322,13 +322,13 @@ static int fsl_dma_new(struct snd_soc_pcm_runtime *rtd)
}
}
if (dai->driver->capture.channels_min) {
if (pcm->streams[1].substream) {
ret = snd_dma_alloc_pages(SNDRV_DMA_TYPE_DEV, card->dev,
fsl_dma_hardware.buffer_bytes_max,
&pcm->streams[1].substream->dma_buffer);
if (ret) {
snd_dma_free_pages(&pcm->streams[0].substream->dma_buffer);
dev_err(card->dev, "can't alloc capture dma buffer\n");
snd_dma_free_pages(&pcm->streams[0].substream->dma_buffer);
return ret;
}
}
......@@ -451,7 +451,8 @@ static int fsl_dma_open(struct snd_pcm_substream *substream)
dma_private->ld_buf_phys = ld_buf_phys;
dma_private->dma_buf_phys = substream->dma_buffer.addr;
ret = request_irq(dma_private->irq, fsl_dma_isr, 0, "DMA", dma_private);
ret = request_irq(dma_private->irq, fsl_dma_isr, 0, "fsldma-audio",
dma_private);
if (ret) {
dev_err(dev, "can't register ISR for IRQ %u (ret=%i)\n",
dma_private->irq, ret);
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册