提交 bdf7752e 编写于 作者: D Dean Luick 提交者: Doug Ledford

IB/hfi1: Use the same capability state for all shared contexts

Save the current capability state at user context creation
time.  Report this saved value for all shared contexts.

Also get rid of unnecessary hfi1_get_base_kinfo function.
Reviewed-by: NIra Weiny <ira.weiny@intel.com>
Signed-off-by: NDean Luick <dean.luick@intel.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>
上级 53445bb3
......@@ -9648,14 +9648,6 @@ void hfi1_clear_tids(struct hfi1_ctxtdata *rcd)
hfi1_put_tid(dd, i, PT_INVALID, 0, 0);
}
int hfi1_get_base_kinfo(struct hfi1_ctxtdata *rcd,
struct hfi1_ctxt_info *kinfo)
{
kinfo->runtime_flags = (HFI1_MISC_GET() << HFI1_CAP_USER_SHIFT) |
HFI1_CAP_UGET(MASK) | HFI1_CAP_KGET(K2U);
return 0;
}
struct hfi1_message_header *hfi1_get_msgheader(
struct hfi1_devdata *dd, __le32 *rhf_addr)
{
......
......@@ -1337,8 +1337,6 @@ void hfi1_start_cleanup(struct hfi1_devdata *dd);
void hfi1_clear_tids(struct hfi1_ctxtdata *rcd);
struct hfi1_message_header *hfi1_get_msgheader(
struct hfi1_devdata *dd, __le32 *rhf_addr);
int hfi1_get_base_kinfo(struct hfi1_ctxtdata *rcd,
struct hfi1_ctxt_info *kinfo);
int hfi1_init_ctxt(struct send_context *sc);
void hfi1_put_tid(struct hfi1_devdata *dd, u32 index,
u32 type, unsigned long pa, u16 order);
......
......@@ -981,7 +981,7 @@ static int allocate_ctxt(struct file *fp, struct hfi1_devdata *dd,
return ret;
}
uctxt->userversion = uinfo->userversion;
uctxt->flags = HFI1_CAP_UGET(MASK);
uctxt->flags = hfi1_cap_mask; /* save current flag state */
init_waitqueue_head(&uctxt->wait);
strlcpy(uctxt->comm, current->comm, sizeof(uctxt->comm));
memcpy(uctxt->uuid, uinfo->uuid, sizeof(uctxt->uuid));
......@@ -1084,18 +1084,18 @@ static int user_init(struct file *fp)
hfi1_set_ctxt_jkey(uctxt->dd, uctxt->ctxt, uctxt->jkey);
rcvctrl_ops = HFI1_RCVCTRL_CTXT_ENB;
if (HFI1_CAP_KGET_MASK(uctxt->flags, HDRSUPP))
if (HFI1_CAP_UGET_MASK(uctxt->flags, HDRSUPP))
rcvctrl_ops |= HFI1_RCVCTRL_TIDFLOW_ENB;
/*
* Ignore the bit in the flags for now until proper
* support for multiple packet per rcv array entry is
* added.
*/
if (!HFI1_CAP_KGET_MASK(uctxt->flags, MULTI_PKT_EGR))
if (!HFI1_CAP_UGET_MASK(uctxt->flags, MULTI_PKT_EGR))
rcvctrl_ops |= HFI1_RCVCTRL_ONE_PKT_EGR_ENB;
if (HFI1_CAP_KGET_MASK(uctxt->flags, NODROP_EGR_FULL))
if (HFI1_CAP_UGET_MASK(uctxt->flags, NODROP_EGR_FULL))
rcvctrl_ops |= HFI1_RCVCTRL_NO_EGR_DROP_ENB;
if (HFI1_CAP_KGET_MASK(uctxt->flags, NODROP_RHQ_FULL))
if (HFI1_CAP_UGET_MASK(uctxt->flags, NODROP_RHQ_FULL))
rcvctrl_ops |= HFI1_RCVCTRL_NO_RHQ_DROP_ENB;
/*
* The RcvCtxtCtrl.TailUpd bit has to be explicitly written.
......@@ -1103,7 +1103,7 @@ static int user_init(struct file *fp)
* uses of the chip or ctxt. Therefore, add the rcvctrl op
* for both cases.
*/
if (HFI1_CAP_KGET_MASK(uctxt->flags, DMA_RTAIL))
if (HFI1_CAP_UGET_MASK(uctxt->flags, DMA_RTAIL))
rcvctrl_ops |= HFI1_RCVCTRL_TAILUPD_ENB;
else
rcvctrl_ops |= HFI1_RCVCTRL_TAILUPD_DIS;
......@@ -1126,9 +1126,10 @@ static int get_ctxt_info(struct file *fp, void __user *ubase, __u32 len)
int ret = 0;
memset(&cinfo, 0, sizeof(cinfo));
ret = hfi1_get_base_kinfo(uctxt, &cinfo);
if (ret < 0)
goto done;
cinfo.runtime_flags = (((uctxt->flags >> HFI1_CAP_MISC_SHIFT) &
HFI1_CAP_MISC_MASK) << HFI1_CAP_USER_SHIFT) |
HFI1_CAP_UGET_MASK(uctxt->flags, MASK) |
HFI1_CAP_KGET_MASK(uctxt->flags, K2U);
cinfo.num_active = hfi1_count_active_units();
cinfo.unit = uctxt->dd->unit;
cinfo.ctxt = uctxt->ctxt;
......@@ -1150,7 +1151,7 @@ static int get_ctxt_info(struct file *fp, void __user *ubase, __u32 len)
trace_hfi1_ctxt_info(uctxt->dd, uctxt->ctxt, fd->subctxt, cinfo);
if (copy_to_user(ubase, &cinfo, sizeof(cinfo)))
ret = -EFAULT;
done:
return ret;
}
......
......@@ -255,7 +255,7 @@ struct hfi1_ctxtdata {
/* chip offset of PIO buffers for this ctxt */
u32 piobufs;
/* per-context configuration flags */
u32 flags;
unsigned long flags;
/* per-context event flags for fileops/intr communication */
unsigned long event_flags;
/* WAIT_RCV that timed out, no interrupt */
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册