Merge branch 'ingenic' into devel

Documentation/devicetree/bindings/gpio/ingenic,gpio.txt

+Ingenic jz47xx GPIO controller
+
+That the Ingenic GPIO driver node must be a sub-node of the Ingenic pinctrl
+driver node.
+
+Required properties:
+--------------------
+
+ - compatible: Must contain one of:
+    - "ingenic,jz4740-gpio"
+    - "ingenic,jz4770-gpio"
+    - "ingenic,jz4780-gpio"
+ - reg: The GPIO bank number.
+ - interrupt-controller: Marks the device node as an interrupt controller.
+ - interrupts: Interrupt specifier for the controllers interrupt.
+ - #interrupt-cells: Should be 2. Refer to
+   ../interrupt-controller/interrupts.txt for more details.
+ - gpio-controller: Marks the device node as a GPIO controller.
+ - #gpio-cells: Should be 2. The first cell is the GPIO number and the second
+    cell specifies GPIO flags, as defined in <dt-bindings/gpio/gpio.h>. Only the
+    GPIO_ACTIVE_HIGH and GPIO_ACTIVE_LOW flags are supported.
+ - gpio-ranges: Range of pins managed by the GPIO controller. Refer to
+   'gpio.txt' in this directory for more details.
+
+Example:
+--------
+
+&pinctrl {
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	gpa: gpio@0 {
+		compatible = "ingenic,jz4740-gpio";
+		reg = <0>;
+
+		gpio-controller;
+		gpio-ranges = <&pinctrl 0 0 32>;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+
+		interrupt-parent = <&intc>;
+		interrupts = <28>;
+	};
+};

Documentation/devicetree/bindings/pinctrl/ingenic,pinctrl.txt

+Ingenic jz47xx pin controller
+
+Please refer to pinctrl-bindings.txt in this directory for details of the
+common pinctrl bindings used by client devices, including the meaning of the
+phrase "pin configuration node".
+
+For the jz47xx SoCs, pin control is tightly bound with GPIO ports. All pins may
+be used as GPIOs, multiplexed device functions are configured within the
+GPIO port configuration registers and it is typical to refer to pins using the
+naming scheme "PxN" where x is a character identifying the GPIO port with
+which the pin is associated and N is an integer from 0 to 31 identifying the
+pin within that GPIO port. For example PA0 is the first pin in GPIO port A, and
+PB31 is the last pin in GPIO port B. The jz4740 contains 4 GPIO ports, PA to
+PD, for a total of 128 pins. The jz4780 contains 6 GPIO ports, PA to PF, for a
+total of 192 pins.
+
+
+Required properties:
+--------------------
+
+ - compatible: One of:
+    - "ingenic,jz4740-pinctrl"
+    - "ingenic,jz4770-pinctrl"
+    - "ingenic,jz4780-pinctrl"
+ - reg: Address range of the pinctrl registers.
+
+
+GPIO sub-nodes
+--------------
+
+The pinctrl node can have optional sub-nodes for the Ingenic GPIO driver;
+please refer to ../gpio/ingenic,gpio.txt.
+
+
+Example:
+--------
+
+pinctrl: pin-controller@10010000 {
+	compatible = "ingenic,jz4740-pinctrl";
+	reg = <0x10010000 0x400>;
+};

arch/mips/Kconfig

@@ -364,6 +364,7 @@ config MACH_INGENIC
 	select SYS_SUPPORTS_ZBOOT_UART16550
 	select DMA_NONCOHERENT
 	select IRQ_MIPS_CPU
+	select PINCTRL
 	select GPIOLIB
 	select COMMON_CLK
 	select GENERIC_IRQ_CHIP

arch/mips/boot/dts/ingenic/ci20.dts

@@ -29,18 +29,30 @@
 
 &uart0 {
 	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pins_uart0>;
 };
 
 &uart1 {
 	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pins_uart1>;
 };
 
 &uart3 {
 	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pins_uart2>;
 };
 
 &uart4 {
 	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pins_uart4>;
 };
 
 &nemc {
@@ -61,6 +73,13 @@
 		ingenic,nemc-tAW = <15>;
 		ingenic,nemc-tSTRV = <100>;
 
+		/*
+		 * Only CLE/ALE are needed for the devices that are connected, rather
+		 * than the full address line set.
+		 */
+		pinctrl-names = "default";
+		pinctrl-0 = <&pins_nemc>;
+
 		nand@1 {
 			reg = <1>;
 
@@ -69,6 +88,9 @@
 			nand-ecc-mode = "hw";
 			nand-on-flash-bbt;
 
+			pinctrl-names = "default";
+			pinctrl-0 = <&pins_nemc_cs1>;
+
 			partitions {
 				compatible = "fixed-partitions";
 				#address-cells = <2>;
@@ -106,3 +128,41 @@
 &bch {
 	status = "okay";
 };
+
+&pinctrl {
+	pins_uart0: uart0 {
+		function = "uart0";
+		groups = "uart0-data";
+		bias-disable;
+	};
+
+	pins_uart1: uart1 {
+		function = "uart1";
+		groups = "uart1-data";
+		bias-disable;
+	};
+
+	pins_uart2: uart2 {
+		function = "uart2";
+		groups = "uart2-data", "uart2-hwflow";
+		bias-disable;
+	};
+
+	pins_uart4: uart4 {
+		function = "uart4";
+		groups = "uart4-data";
+		bias-disable;
+	};
+
+	pins_nemc: nemc {
+		function = "nemc";
+		groups = "nemc-data", "nemc-cle-ale", "nemc-rd-we", "nemc-frd-fwe";
+		bias-disable;
+	};
+
+	pins_nemc_cs1: nemc-cs1 {
+		function = "nemc-cs1";
+		groups = "nemc-cs1";
+		bias-disable;
+	};
+};

arch/mips/boot/dts/ingenic/jz4740.dtsi

@@ -55,6 +55,74 @@
 		clock-names = "rtc";
 	};
 
+	pinctrl: pin-controller@10010000 {
+		compatible = "ingenic,jz4740-pinctrl";
+		reg = <0x10010000 0x400>;
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		gpa: gpio@0 {
+			compatible = "ingenic,jz4740-gpio";
+			reg = <0>;
+
+			gpio-controller;
+			gpio-ranges = <&pinctrl 0 0 32>;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+
+			interrupt-parent = <&intc>;
+			interrupts = <28>;
+		};
+
+		gpb: gpio@1 {
+			compatible = "ingenic,jz4740-gpio";
+			reg = <1>;
+
+			gpio-controller;
+			gpio-ranges = <&pinctrl 0 32 32>;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+
+			interrupt-parent = <&intc>;
+			interrupts = <27>;
+		};
+
+		gpc: gpio@2 {
+			compatible = "ingenic,jz4740-gpio";
+			reg = <2>;
+
+			gpio-controller;
+			gpio-ranges = <&pinctrl 0 64 32>;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+
+			interrupt-parent = <&intc>;
+			interrupts = <26>;
+		};
+
+		gpd: gpio@3 {
+			compatible = "ingenic,jz4740-gpio";
+			reg = <3>;
+
+			gpio-controller;
+			gpio-ranges = <&pinctrl 0 96 32>;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+
+			interrupt-parent = <&intc>;
+			interrupts = <25>;
+		};
+	};
+
 	uart0: serial@10030000 {
 		compatible = "ingenic,jz4740-uart";
 		reg = <0x10030000 0x100>;

arch/mips/boot/dts/ingenic/jz4780.dtsi

@@ -44,6 +44,104 @@
 		#clock-cells = <1>;
 	};
 
+	pinctrl: pin-controller@10010000 {
+		compatible = "ingenic,jz4780-pinctrl";
+		reg = <0x10010000 0x600>;
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		gpa: gpio@0 {
+			compatible = "ingenic,jz4780-gpio";
+			reg = <0>;
+
+			gpio-controller;
+			gpio-ranges = <&pinctrl 0 0 32>;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+
+			interrupt-parent = <&intc>;
+			interrupts = <17>;
+		};
+
+		gpb: gpio@1 {
+			compatible = "ingenic,jz4780-gpio";
+			reg = <1>;
+
+			gpio-controller;
+			gpio-ranges = <&pinctrl 0 32 32>;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+
+			interrupt-parent = <&intc>;
+			interrupts = <16>;
+		};
+
+		gpc: gpio@2 {
+			compatible = "ingenic,jz4780-gpio";
+			reg = <2>;
+
+			gpio-controller;
+			gpio-ranges = <&pinctrl 0 64 32>;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+
+			interrupt-parent = <&intc>;
+			interrupts = <15>;
+		};
+
+		gpd: gpio@3 {
+			compatible = "ingenic,jz4780-gpio";
+			reg = <3>;
+
+			gpio-controller;
+			gpio-ranges = <&pinctrl 0 96 32>;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+
+			interrupt-parent = <&intc>;
+			interrupts = <14>;
+		};
+
+		gpe: gpio@4 {
+			compatible = "ingenic,jz4780-gpio";
+			reg = <4>;
+
+			gpio-controller;
+			gpio-ranges = <&pinctrl 0 128 32>;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+
+			interrupt-parent = <&intc>;
+			interrupts = <13>;
+		};
+
+		gpf: gpio@5 {
+			compatible = "ingenic,jz4780-gpio";
+			reg = <5>;
+
+			gpio-controller;
+			gpio-ranges = <&pinctrl 0 160 32>;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+
+			interrupt-parent = <&intc>;
+			interrupts = <12>;
+		};
+	};
+
 	uart0: serial@10030000 {
 		compatible = "ingenic,jz4780-uart";
 		reg = <0x10030000 0x100>;

arch/mips/boot/dts/ingenic/qi_lb60.dts

@@ -17,3 +17,16 @@
 &rtc_dev {
 	system-power-controller;
 };
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pins_uart0>;
+};
+
+&pinctrl {
+	pins_uart0: uart0 {
+		function = "uart0";
+		groups = "uart0-data";
+		bias-disable;
+	};
+};

arch/mips/include/asm/mach-jz4740/gpio.h

@@ -16,380 +16,9 @@
 #ifndef _JZ_GPIO_H
 #define _JZ_GPIO_H
 
-#include <linux/types.h>
-
-enum jz_gpio_function {
-    JZ_GPIO_FUNC_NONE,
-    JZ_GPIO_FUNC1,
-    JZ_GPIO_FUNC2,
-    JZ_GPIO_FUNC3,
-};
-
-/*
- Usually a driver for a SoC component has to request several gpio pins and
- configure them as function pins.
- jz_gpio_bulk_request can be used to ease this process.
- Usually one would do something like:
-
- static const struct jz_gpio_bulk_request i2c_pins[] = {
-	JZ_GPIO_BULK_PIN(I2C_SDA),
-	JZ_GPIO_BULK_PIN(I2C_SCK),
- };
-
- inside the probe function:
-
-    ret = jz_gpio_bulk_request(i2c_pins, ARRAY_SIZE(i2c_pins));
-    if (ret) {
-	...
-
- inside the remove function:
-
-    jz_gpio_bulk_free(i2c_pins, ARRAY_SIZE(i2c_pins));
-
-*/
-
-struct jz_gpio_bulk_request {
-	int gpio;
-	const char *name;
-	enum jz_gpio_function function;
-};
-
-#define JZ_GPIO_BULK_PIN(pin) { \
-    .gpio = JZ_GPIO_ ## pin, \
-    .name = #pin, \
-    .function = JZ_GPIO_FUNC_ ## pin \
-}
-
-int jz_gpio_bulk_request(const struct jz_gpio_bulk_request *request, size_t num);
-void jz_gpio_bulk_free(const struct jz_gpio_bulk_request *request, size_t num);
-void jz_gpio_bulk_suspend(const struct jz_gpio_bulk_request *request, size_t num);
-void jz_gpio_bulk_resume(const struct jz_gpio_bulk_request *request, size_t num);
-void jz_gpio_enable_pullup(unsigned gpio);
-void jz_gpio_disable_pullup(unsigned gpio);
-int jz_gpio_set_function(int gpio, enum jz_gpio_function function);
-
-int jz_gpio_port_direction_input(int port, uint32_t mask);
-int jz_gpio_port_direction_output(int port, uint32_t mask);
-void jz_gpio_port_set_value(int port, uint32_t value, uint32_t mask);
-uint32_t jz_gpio_port_get_value(int port, uint32_t mask);
-
 #define JZ_GPIO_PORTA(x) ((x) + 32 * 0)
 #define JZ_GPIO_PORTB(x) ((x) + 32 * 1)
 #define JZ_GPIO_PORTC(x) ((x) + 32 * 2)
 #define JZ_GPIO_PORTD(x) ((x) + 32 * 3)
 
-/* Port A function pins */
-#define JZ_GPIO_MEM_DATA0		JZ_GPIO_PORTA(0)
-#define JZ_GPIO_MEM_DATA1		JZ_GPIO_PORTA(1)
-#define JZ_GPIO_MEM_DATA2		JZ_GPIO_PORTA(2)
-#define JZ_GPIO_MEM_DATA3		JZ_GPIO_PORTA(3)
-#define JZ_GPIO_MEM_DATA4		JZ_GPIO_PORTA(4)
-#define JZ_GPIO_MEM_DATA5		JZ_GPIO_PORTA(5)
-#define JZ_GPIO_MEM_DATA6		JZ_GPIO_PORTA(6)
-#define JZ_GPIO_MEM_DATA7		JZ_GPIO_PORTA(7)
-#define JZ_GPIO_MEM_DATA8		JZ_GPIO_PORTA(8)
-#define JZ_GPIO_MEM_DATA9		JZ_GPIO_PORTA(9)
-#define JZ_GPIO_MEM_DATA10		JZ_GPIO_PORTA(10)
-#define JZ_GPIO_MEM_DATA11		JZ_GPIO_PORTA(11)
-#define JZ_GPIO_MEM_DATA12		JZ_GPIO_PORTA(12)
-#define JZ_GPIO_MEM_DATA13		JZ_GPIO_PORTA(13)
-#define JZ_GPIO_MEM_DATA14		JZ_GPIO_PORTA(14)
-#define JZ_GPIO_MEM_DATA15		JZ_GPIO_PORTA(15)
-#define JZ_GPIO_MEM_DATA16		JZ_GPIO_PORTA(16)
-#define JZ_GPIO_MEM_DATA17		JZ_GPIO_PORTA(17)
-#define JZ_GPIO_MEM_DATA18		JZ_GPIO_PORTA(18)
-#define JZ_GPIO_MEM_DATA19		JZ_GPIO_PORTA(19)
-#define JZ_GPIO_MEM_DATA20		JZ_GPIO_PORTA(20)
-#define JZ_GPIO_MEM_DATA21		JZ_GPIO_PORTA(21)
-#define JZ_GPIO_MEM_DATA22		JZ_GPIO_PORTA(22)
-#define JZ_GPIO_MEM_DATA23		JZ_GPIO_PORTA(23)
-#define JZ_GPIO_MEM_DATA24		JZ_GPIO_PORTA(24)
-#define JZ_GPIO_MEM_DATA25		JZ_GPIO_PORTA(25)
-#define JZ_GPIO_MEM_DATA26		JZ_GPIO_PORTA(26)
-#define JZ_GPIO_MEM_DATA27		JZ_GPIO_PORTA(27)
-#define JZ_GPIO_MEM_DATA28		JZ_GPIO_PORTA(28)
-#define JZ_GPIO_MEM_DATA29		JZ_GPIO_PORTA(29)
-#define JZ_GPIO_MEM_DATA30		JZ_GPIO_PORTA(30)
-#define JZ_GPIO_MEM_DATA31		JZ_GPIO_PORTA(31)
-
-#define JZ_GPIO_FUNC_MEM_DATA0		JZ_GPIO_FUNC1
-#define JZ_GPIO_FUNC_MEM_DATA1		JZ_GPIO_FUNC1
-#define JZ_GPIO_FUNC_MEM_DATA2		JZ_GPIO_FUNC1
-#define JZ_GPIO_FUNC_MEM_DATA3		JZ_GPIO_FUNC1
-#define JZ_GPIO_FUNC_MEM_DATA4		JZ_GPIO_FUNC1
-#define JZ_GPIO_FUNC_MEM_DATA5		JZ_GPIO_FUNC1
-#define JZ_GPIO_FUNC_MEM_DATA6		JZ_GPIO_FUNC1
-#define JZ_GPIO_FUNC_MEM_DATA7		JZ_GPIO_FUNC1
-#define JZ_GPIO_FUNC_MEM_DATA8		JZ_GPIO_FUNC1
-#define JZ_GPIO_FUNC_MEM_DATA9		JZ_GPIO_FUNC1
-#define JZ_GPIO_FUNC_MEM_DATA10		JZ_GPIO_FUNC1
-#define JZ_GPIO_FUNC_MEM_DATA11		JZ_GPIO_FUNC1
-#define JZ_GPIO_FUNC_MEM_DATA12		JZ_GPIO_FUNC1
-#define JZ_GPIO_FUNC_MEM_DATA13		JZ_GPIO_FUNC1
-#define JZ_GPIO_FUNC_MEM_DATA14		JZ_GPIO_FUNC1
-#define JZ_GPIO_FUNC_MEM_DATA15		JZ_GPIO_FUNC1
-#define JZ_GPIO_FUNC_MEM_DATA16		JZ_GPIO_FUNC1
-#define JZ_GPIO_FUNC_MEM_DATA17		JZ_GPIO_FUNC1
-#define JZ_GPIO_FUNC_MEM_DATA18		JZ_GPIO_FUNC1
-#define JZ_GPIO_FUNC_MEM_DATA19		JZ_GPIO_FUNC1
-#define JZ_GPIO_FUNC_MEM_DATA20		JZ_GPIO_FUNC1
-#define JZ_GPIO_FUNC_MEM_DATA21		JZ_GPIO_FUNC1
-#define JZ_GPIO_FUNC_MEM_DATA22		JZ_GPIO_FUNC1
-#define JZ_GPIO_FUNC_MEM_DATA23		JZ_GPIO_FUNC1
-#define JZ_GPIO_FUNC_MEM_DATA24		JZ_GPIO_FUNC1
-#define JZ_GPIO_FUNC_MEM_DATA25		JZ_GPIO_FUNC1
-#define JZ_GPIO_FUNC_MEM_DATA26		JZ_GPIO_FUNC1
-#define JZ_GPIO_FUNC_MEM_DATA27		JZ_GPIO_FUNC1
-#define JZ_GPIO_FUNC_MEM_DATA28		JZ_GPIO_FUNC1
-#define JZ_GPIO_FUNC_MEM_DATA29		JZ_GPIO_FUNC1
-#define JZ_GPIO_FUNC_MEM_DATA30		JZ_GPIO_FUNC1
-#define JZ_GPIO_FUNC_MEM_DATA31		JZ_GPIO_FUNC1
-
-/* Port B function pins */
-#define JZ_GPIO_MEM_ADDR0		JZ_GPIO_PORTB(0)
-#define JZ_GPIO_MEM_ADDR1		JZ_GPIO_PORTB(1)
-#define JZ_GPIO_MEM_ADDR2		JZ_GPIO_PORTB(2)
-#define JZ_GPIO_MEM_ADDR3		JZ_GPIO_PORTB(3)
-#define JZ_GPIO_MEM_ADDR4		JZ_GPIO_PORTB(4)
-#define JZ_GPIO_MEM_ADDR5		JZ_GPIO_PORTB(5)
-#define JZ_GPIO_MEM_ADDR6		JZ_GPIO_PORTB(6)
-#define JZ_GPIO_MEM_ADDR7		JZ_GPIO_PORTB(7)
-#define JZ_GPIO_MEM_ADDR8		JZ_GPIO_PORTB(8)
-#define JZ_GPIO_MEM_ADDR9		JZ_GPIO_PORTB(9)
-#define JZ_GPIO_MEM_ADDR10		JZ_GPIO_PORTB(10)
-#define JZ_GPIO_MEM_ADDR11		JZ_GPIO_PORTB(11)
-#define JZ_GPIO_MEM_ADDR12		JZ_GPIO_PORTB(12)
-#define JZ_GPIO_MEM_ADDR13		JZ_GPIO_PORTB(13)
-#define JZ_GPIO_MEM_ADDR14		JZ_GPIO_PORTB(14)
-#define JZ_GPIO_MEM_ADDR15		JZ_GPIO_PORTB(15)
-#define JZ_GPIO_MEM_ADDR16		JZ_GPIO_PORTB(16)
-#define JZ_GPIO_LCD_CLS			JZ_GPIO_PORTB(17)
-#define JZ_GPIO_LCD_SPL			JZ_GPIO_PORTB(18)
-#define JZ_GPIO_MEM_DCS			JZ_GPIO_PORTB(19)
-#define JZ_GPIO_MEM_RAS			JZ_GPIO_PORTB(20)
-#define JZ_GPIO_MEM_CAS			JZ_GPIO_PORTB(21)
-#define JZ_GPIO_MEM_SDWE		JZ_GPIO_PORTB(22)
-#define JZ_GPIO_MEM_CKE			JZ_GPIO_PORTB(23)
-#define JZ_GPIO_MEM_CKO			JZ_GPIO_PORTB(24)
-#define JZ_GPIO_MEM_CS0			JZ_GPIO_PORTB(25)
-#define JZ_GPIO_MEM_CS1			JZ_GPIO_PORTB(26)
-#define JZ_GPIO_MEM_CS2			JZ_GPIO_PORTB(27)
-#define JZ_GPIO_MEM_CS3			JZ_GPIO_PORTB(28)
-#define JZ_GPIO_MEM_RD			JZ_GPIO_PORTB(29)
-#define JZ_GPIO_MEM_WR			JZ_GPIO_PORTB(30)
-#define JZ_GPIO_MEM_WE0			JZ_GPIO_PORTB(31)
-
-#define JZ_GPIO_FUNC_MEM_ADDR0		JZ_GPIO_FUNC1
-#define JZ_GPIO_FUNC_MEM_ADDR1		JZ_GPIO_FUNC1
-#define JZ_GPIO_FUNC_MEM_ADDR2		JZ_GPIO_FUNC1
-#define JZ_GPIO_FUNC_MEM_ADDR3		JZ_GPIO_FUNC1
-#define JZ_GPIO_FUNC_MEM_ADDR4		JZ_GPIO_FUNC1
-#define JZ_GPIO_FUNC_MEM_ADDR5		JZ_GPIO_FUNC1
-#define JZ_GPIO_FUNC_MEM_ADDR6		JZ_GPIO_FUNC1
-#define JZ_GPIO_FUNC_MEM_ADDR7		JZ_GPIO_FUNC1
-#define JZ_GPIO_FUNC_MEM_ADDR8		JZ_GPIO_FUNC1
-#define JZ_GPIO_FUNC_MEM_ADDR9		JZ_GPIO_FUNC1
-#define JZ_GPIO_FUNC_MEM_ADDR10		JZ_GPIO_FUNC1
-#define JZ_GPIO_FUNC_MEM_ADDR11		JZ_GPIO_FUNC1
-#define JZ_GPIO_FUNC_MEM_ADDR12		JZ_GPIO_FUNC1
-#define JZ_GPIO_FUNC_MEM_ADDR13		JZ_GPIO_FUNC1
-#define JZ_GPIO_FUNC_MEM_ADDR14		JZ_GPIO_FUNC1
-#define JZ_GPIO_FUNC_MEM_ADDR15		JZ_GPIO_FUNC1
-#define JZ_GPIO_FUNC_MEM_ADDR16		JZ_GPIO_FUNC1
-#define JZ_GPIO_FUNC_LCD_CLS		JZ_GPIO_FUNC1
-#define JZ_GPIO_FUNC_LCD_SPL		JZ_GPIO_FUNC1
-#define JZ_GPIO_FUNC_MEM_DCS		JZ_GPIO_FUNC1
-#define JZ_GPIO_FUNC_MEM_RAS		JZ_GPIO_FUNC1
-#define JZ_GPIO_FUNC_MEM_CAS		JZ_GPIO_FUNC1
-#define JZ_GPIO_FUNC_MEM_SDWE		JZ_GPIO_FUNC1
-#define JZ_GPIO_FUNC_MEM_CKE		JZ_GPIO_FUNC1
-#define JZ_GPIO_FUNC_MEM_CKO		JZ_GPIO_FUNC1
-#define JZ_GPIO_FUNC_MEM_CS0		JZ_GPIO_FUNC1
-#define JZ_GPIO_FUNC_MEM_CS1		JZ_GPIO_FUNC1
-#define JZ_GPIO_FUNC_MEM_CS2		JZ_GPIO_FUNC1
-#define JZ_GPIO_FUNC_MEM_CS3		JZ_GPIO_FUNC1
-#define JZ_GPIO_FUNC_MEM_RD		JZ_GPIO_FUNC1
-#define JZ_GPIO_FUNC_MEM_WR		JZ_GPIO_FUNC1
-#define JZ_GPIO_FUNC_MEM_WE0		JZ_GPIO_FUNC1
-
-
-#define JZ_GPIO_MEM_ADDR21		JZ_GPIO_PORTB(17)
-#define JZ_GPIO_MEM_ADDR22		JZ_GPIO_PORTB(18)
-
-#define JZ_GPIO_FUNC_MEM_ADDR21		JZ_GPIO_FUNC2
-#define JZ_GPIO_FUNC_MEM_ADDR22		JZ_GPIO_FUNC2
-
-/* Port C function pins */
-#define JZ_GPIO_LCD_DATA0		JZ_GPIO_PORTC(0)
-#define JZ_GPIO_LCD_DATA1		JZ_GPIO_PORTC(1)
-#define JZ_GPIO_LCD_DATA2		JZ_GPIO_PORTC(2)
-#define JZ_GPIO_LCD_DATA3		JZ_GPIO_PORTC(3)
-#define JZ_GPIO_LCD_DATA4		JZ_GPIO_PORTC(4)
-#define JZ_GPIO_LCD_DATA5		JZ_GPIO_PORTC(5)
-#define JZ_GPIO_LCD_DATA6		JZ_GPIO_PORTC(6)
-#define JZ_GPIO_LCD_DATA7		JZ_GPIO_PORTC(7)
-#define JZ_GPIO_LCD_DATA8		JZ_GPIO_PORTC(8)
-#define JZ_GPIO_LCD_DATA9		JZ_GPIO_PORTC(9)
-#define JZ_GPIO_LCD_DATA10		JZ_GPIO_PORTC(10)
-#define JZ_GPIO_LCD_DATA11		JZ_GPIO_PORTC(11)
-#define JZ_GPIO_LCD_DATA12		JZ_GPIO_PORTC(12)
-#define JZ_GPIO_LCD_DATA13		JZ_GPIO_PORTC(13)
-#define JZ_GPIO_LCD_DATA14		JZ_GPIO_PORTC(14)
-#define JZ_GPIO_LCD_DATA15		JZ_GPIO_PORTC(15)
-#define JZ_GPIO_LCD_DATA16		JZ_GPIO_PORTC(16)
-#define JZ_GPIO_LCD_DATA17		JZ_GPIO_PORTC(17)
-#define JZ_GPIO_LCD_PCLK		JZ_GPIO_PORTC(18)
-#define JZ_GPIO_LCD_HSYNC		JZ_GPIO_PORTC(19)
-#define JZ_GPIO_LCD_VSYNC		JZ_GPIO_PORTC(20)
-#define JZ_GPIO_LCD_DE			JZ_GPIO_PORTC(21)
-#define JZ_GPIO_LCD_PS			JZ_GPIO_PORTC(22)
-#define JZ_GPIO_LCD_REV			JZ_GPIO_PORTC(23)
-#define JZ_GPIO_MEM_WE1			JZ_GPIO_PORTC(24)
-#define JZ_GPIO_MEM_WE2			JZ_GPIO_PORTC(25)
-#define JZ_GPIO_MEM_WE3			JZ_GPIO_PORTC(26)
-#define JZ_GPIO_MEM_WAIT		JZ_GPIO_PORTC(27)
-#define JZ_GPIO_MEM_FRE			JZ_GPIO_PORTC(28)
-#define JZ_GPIO_MEM_FWE			JZ_GPIO_PORTC(29)
-
-#define JZ_GPIO_FUNC_LCD_DATA0		JZ_GPIO_FUNC1
-#define JZ_GPIO_FUNC_LCD_DATA1		JZ_GPIO_FUNC1
-#define JZ_GPIO_FUNC_LCD_DATA2		JZ_GPIO_FUNC1
-#define JZ_GPIO_FUNC_LCD_DATA3		JZ_GPIO_FUNC1
-#define JZ_GPIO_FUNC_LCD_DATA4		JZ_GPIO_FUNC1
-#define JZ_GPIO_FUNC_LCD_DATA5		JZ_GPIO_FUNC1
-#define JZ_GPIO_FUNC_LCD_DATA6		JZ_GPIO_FUNC1
-#define JZ_GPIO_FUNC_LCD_DATA7		JZ_GPIO_FUNC1
-#define JZ_GPIO_FUNC_LCD_DATA8		JZ_GPIO_FUNC1
-#define JZ_GPIO_FUNC_LCD_DATA9		JZ_GPIO_FUNC1
-#define JZ_GPIO_FUNC_LCD_DATA10		JZ_GPIO_FUNC1
-#define JZ_GPIO_FUNC_LCD_DATA11		JZ_GPIO_FUNC1
-#define JZ_GPIO_FUNC_LCD_DATA12		JZ_GPIO_FUNC1
-#define JZ_GPIO_FUNC_LCD_DATA13		JZ_GPIO_FUNC1
-#define JZ_GPIO_FUNC_LCD_DATA14		JZ_GPIO_FUNC1
-#define JZ_GPIO_FUNC_LCD_DATA15		JZ_GPIO_FUNC1
-#define JZ_GPIO_FUNC_LCD_DATA16		JZ_GPIO_FUNC1
-#define JZ_GPIO_FUNC_LCD_DATA17		JZ_GPIO_FUNC1
-#define JZ_GPIO_FUNC_LCD_PCLK		JZ_GPIO_FUNC1
-#define JZ_GPIO_FUNC_LCD_VSYNC		JZ_GPIO_FUNC1
-#define JZ_GPIO_FUNC_LCD_HSYNC		JZ_GPIO_FUNC1
-#define JZ_GPIO_FUNC_LCD_DE		JZ_GPIO_FUNC1
-#define JZ_GPIO_FUNC_LCD_PS		JZ_GPIO_FUNC1
-#define JZ_GPIO_FUNC_LCD_REV		JZ_GPIO_FUNC1
-#define JZ_GPIO_FUNC_MEM_WE1		JZ_GPIO_FUNC1
-#define JZ_GPIO_FUNC_MEM_WE2		JZ_GPIO_FUNC1
-#define JZ_GPIO_FUNC_MEM_WE3		JZ_GPIO_FUNC1
-#define JZ_GPIO_FUNC_MEM_WAIT		JZ_GPIO_FUNC1
-#define JZ_GPIO_FUNC_MEM_FRE		JZ_GPIO_FUNC1
-#define JZ_GPIO_FUNC_MEM_FWE		JZ_GPIO_FUNC1
-
-
-#define JZ_GPIO_MEM_ADDR19		JZ_GPIO_PORTB(22)
-#define JZ_GPIO_MEM_ADDR20		JZ_GPIO_PORTB(23)
-
-#define JZ_GPIO_FUNC_MEM_ADDR19		JZ_GPIO_FUNC2
-#define JZ_GPIO_FUNC_MEM_ADDR20		JZ_GPIO_FUNC2
-
-/* Port D function pins */
-#define JZ_GPIO_CIM_DATA0		JZ_GPIO_PORTD(0)
-#define JZ_GPIO_CIM_DATA1		JZ_GPIO_PORTD(1)
-#define JZ_GPIO_CIM_DATA2		JZ_GPIO_PORTD(2)
-#define JZ_GPIO_CIM_DATA3		JZ_GPIO_PORTD(3)
-#define JZ_GPIO_CIM_DATA4		JZ_GPIO_PORTD(4)
-#define JZ_GPIO_CIM_DATA5		JZ_GPIO_PORTD(5)
-#define JZ_GPIO_CIM_DATA6		JZ_GPIO_PORTD(6)
-#define JZ_GPIO_CIM_DATA7		JZ_GPIO_PORTD(7)
-#define JZ_GPIO_MSC_CMD			JZ_GPIO_PORTD(8)
-#define JZ_GPIO_MSC_CLK			JZ_GPIO_PORTD(9)
-#define JZ_GPIO_MSC_DATA0		JZ_GPIO_PORTD(10)
-#define JZ_GPIO_MSC_DATA1		JZ_GPIO_PORTD(11)
-#define JZ_GPIO_MSC_DATA2		JZ_GPIO_PORTD(12)
-#define JZ_GPIO_MSC_DATA3		JZ_GPIO_PORTD(13)
-#define JZ_GPIO_CIM_MCLK		JZ_GPIO_PORTD(14)
-#define JZ_GPIO_CIM_PCLK		JZ_GPIO_PORTD(15)
-#define JZ_GPIO_CIM_VSYNC		JZ_GPIO_PORTD(16)
-#define JZ_GPIO_CIM_HSYNC		JZ_GPIO_PORTD(17)
-#define JZ_GPIO_SPI_CLK			JZ_GPIO_PORTD(18)
-#define JZ_GPIO_SPI_CE0			JZ_GPIO_PORTD(19)
-#define JZ_GPIO_SPI_DT			JZ_GPIO_PORTD(20)
-#define JZ_GPIO_SPI_DR			JZ_GPIO_PORTD(21)
-#define JZ_GPIO_SPI_CE1			JZ_GPIO_PORTD(22)
-#define JZ_GPIO_PWM0			JZ_GPIO_PORTD(23)
-#define JZ_GPIO_PWM1			JZ_GPIO_PORTD(24)
-#define JZ_GPIO_PWM2			JZ_GPIO_PORTD(25)
-#define JZ_GPIO_PWM3			JZ_GPIO_PORTD(26)
-#define JZ_GPIO_PWM4			JZ_GPIO_PORTD(27)
-#define JZ_GPIO_PWM5			JZ_GPIO_PORTD(28)
-#define JZ_GPIO_PWM6			JZ_GPIO_PORTD(30)
-#define JZ_GPIO_PWM7			JZ_GPIO_PORTD(31)
-
-#define JZ_GPIO_FUNC_CIM_DATA		JZ_GPIO_FUNC1
-#define JZ_GPIO_FUNC_CIM_DATA0		JZ_GPIO_FUNC_CIM_DATA
-#define JZ_GPIO_FUNC_CIM_DATA1		JZ_GPIO_FUNC_CIM_DATA
-#define JZ_GPIO_FUNC_CIM_DATA2		JZ_GPIO_FUNC_CIM_DATA
-#define JZ_GPIO_FUNC_CIM_DATA3		JZ_GPIO_FUNC_CIM_DATA
-#define JZ_GPIO_FUNC_CIM_DATA4		JZ_GPIO_FUNC_CIM_DATA
-#define JZ_GPIO_FUNC_CIM_DATA5		JZ_GPIO_FUNC_CIM_DATA
-#define JZ_GPIO_FUNC_CIM_DATA6		JZ_GPIO_FUNC_CIM_DATA
-#define JZ_GPIO_FUNC_CIM_DATA7		JZ_GPIO_FUNC_CIM_DATA
-#define JZ_GPIO_FUNC_MSC_CMD		JZ_GPIO_FUNC1
-#define JZ_GPIO_FUNC_MSC_CLK		JZ_GPIO_FUNC1
-#define JZ_GPIO_FUNC_MSC_DATA		JZ_GPIO_FUNC1
-#define JZ_GPIO_FUNC_MSC_DATA0		JZ_GPIO_FUNC_MSC_DATA
-#define JZ_GPIO_FUNC_MSC_DATA1		JZ_GPIO_FUNC_MSC_DATA
-#define JZ_GPIO_FUNC_MSC_DATA2		JZ_GPIO_FUNC_MSC_DATA
-#define JZ_GPIO_FUNC_MSC_DATA3		JZ_GPIO_FUNC_MSC_DATA
-#define JZ_GPIO_FUNC_CIM_MCLK		JZ_GPIO_FUNC1
-#define JZ_GPIO_FUNC_CIM_PCLK		JZ_GPIO_FUNC1
-#define JZ_GPIO_FUNC_CIM_VSYNC		JZ_GPIO_FUNC1
-#define JZ_GPIO_FUNC_CIM_HSYNC		JZ_GPIO_FUNC1
-#define JZ_GPIO_FUNC_SPI_CLK		JZ_GPIO_FUNC1
-#define JZ_GPIO_FUNC_SPI_CE0		JZ_GPIO_FUNC1
-#define JZ_GPIO_FUNC_SPI_DT		JZ_GPIO_FUNC1
-#define JZ_GPIO_FUNC_SPI_DR		JZ_GPIO_FUNC1
-#define JZ_GPIO_FUNC_SPI_CE1		JZ_GPIO_FUNC1
-
-#define JZ_GPIO_FUNC_PWM		JZ_GPIO_FUNC1
-#define JZ_GPIO_FUNC_PWM0		JZ_GPIO_FUNC_PWM
-#define JZ_GPIO_FUNC_PWM1		JZ_GPIO_FUNC_PWM
-#define JZ_GPIO_FUNC_PWM2		JZ_GPIO_FUNC_PWM
-#define JZ_GPIO_FUNC_PWM3		JZ_GPIO_FUNC_PWM
-#define JZ_GPIO_FUNC_PWM4		JZ_GPIO_FUNC_PWM
-#define JZ_GPIO_FUNC_PWM5		JZ_GPIO_FUNC_PWM
-#define JZ_GPIO_FUNC_PWM6		JZ_GPIO_FUNC_PWM
-#define JZ_GPIO_FUNC_PWM7		JZ_GPIO_FUNC_PWM
-
-#define JZ_GPIO_MEM_SCLK_RSTN		JZ_GPIO_PORTD(18)
-#define JZ_GPIO_MEM_BCLK		JZ_GPIO_PORTD(19)
-#define JZ_GPIO_MEM_SDATO		JZ_GPIO_PORTD(20)
-#define JZ_GPIO_MEM_SDATI		JZ_GPIO_PORTD(21)
-#define JZ_GPIO_MEM_SYNC		JZ_GPIO_PORTD(22)
-#define JZ_GPIO_I2C_SDA			JZ_GPIO_PORTD(23)
-#define JZ_GPIO_I2C_SCK			JZ_GPIO_PORTD(24)
-#define JZ_GPIO_UART0_TXD		JZ_GPIO_PORTD(25)
-#define JZ_GPIO_UART0_RXD		JZ_GPIO_PORTD(26)
-#define JZ_GPIO_MEM_ADDR17		JZ_GPIO_PORTD(27)
-#define JZ_GPIO_MEM_ADDR18		JZ_GPIO_PORTD(28)
-#define JZ_GPIO_UART0_CTS		JZ_GPIO_PORTD(30)
-#define JZ_GPIO_UART0_RTS		JZ_GPIO_PORTD(31)
-
-#define JZ_GPIO_FUNC_MEM_SCLK_RSTN	JZ_GPIO_FUNC2
-#define JZ_GPIO_FUNC_MEM_BCLK		JZ_GPIO_FUNC2
-#define JZ_GPIO_FUNC_MEM_SDATO		JZ_GPIO_FUNC2
-#define JZ_GPIO_FUNC_MEM_SDATI		JZ_GPIO_FUNC2
-#define JZ_GPIO_FUNC_MEM_SYNC		JZ_GPIO_FUNC2
-#define JZ_GPIO_FUNC_I2C_SDA		JZ_GPIO_FUNC2
-#define JZ_GPIO_FUNC_I2C_SCK		JZ_GPIO_FUNC2
-#define JZ_GPIO_FUNC_UART0_TXD		JZ_GPIO_FUNC2
-#define JZ_GPIO_FUNC_UART0_RXD		JZ_GPIO_FUNC2
-#define JZ_GPIO_FUNC_MEM_ADDR17		JZ_GPIO_FUNC2
-#define JZ_GPIO_FUNC_MEM_ADDR18		JZ_GPIO_FUNC2
-#define JZ_GPIO_FUNC_UART0_CTS		JZ_GPIO_FUNC2
-#define JZ_GPIO_FUNC_UART0_RTS		JZ_GPIO_FUNC2
-
-#define JZ_GPIO_UART1_RXD		JZ_GPIO_PORTD(30)
-#define JZ_GPIO_UART1_TXD		JZ_GPIO_PORTD(31)
-
-#define JZ_GPIO_FUNC_UART1_RXD		JZ_GPIO_FUNC3
-#define JZ_GPIO_FUNC_UART1_TXD		JZ_GPIO_FUNC3
-
 #endif

arch/mips/jz4740/Makefile

@@ -7,8 +7,6 @@
 obj-y += prom.o time.o reset.o setup.o \
 	platform.o timer.o
 
-obj-$(CONFIG_MACH_JZ4740) += gpio.o
-
 CFLAGS_setup.o = -I$(src)/../../../scripts/dtc/libfdt
 
 # board specific support

arch/mips/jz4740/board-qi_lb60.c

@@ -22,6 +22,8 @@
 #include <linux/input/matrix_keypad.h>
 #include <linux/spi/spi.h>
 #include <linux/spi/spi_gpio.h>
+#include <linux/pinctrl/machine.h>
+#include <linux/pinctrl/pinconf-generic.h>
 #include <linux/power_supply.h>
 #include <linux/power/jz4740-battery.h>
 #include <linux/power/gpio-charger.h>
@@ -159,7 +161,7 @@ static struct jz_nand_platform_data qi_lb60_nand_pdata = {
 static struct gpiod_lookup_table qi_lb60_nand_gpio_table = {
 	.dev_id = "jz4740-nand.0",
 	.table = {
-		GPIO_LOOKUP("Bank C", 30, "busy", 0),
+		GPIO_LOOKUP("GPIOC", 30, "busy", 0),
 		{ },
 	},
 };
@@ -421,8 +423,8 @@ static struct platform_device qi_lb60_audio_device = {
 static struct gpiod_lookup_table qi_lb60_audio_gpio_table = {
 	.dev_id = "qi-lb60-audio",
 	.table = {
-		GPIO_LOOKUP("Bank B", 29, "snd", 0),
-		GPIO_LOOKUP("Bank D", 4, "amp", 0),
+		GPIO_LOOKUP("GPIOB", 29, "snd", 0),
+		GPIO_LOOKUP("GPIOD", 4, "amp", 0),
 		{ },
 	},
 };
@@ -447,13 +449,36 @@ static struct platform_device *jz_platform_devices[] __initdata = {
 	&qi_lb60_audio_device,
 };
 
-static void __init board_gpio_setup(void)
-{
-	/* We only need to enable/disable pullup here for pins used in generic
-	 * drivers. Everything else is done by the drivers themselves. */
-	jz_gpio_disable_pullup(QI_LB60_GPIO_SD_VCC_EN_N);
-	jz_gpio_disable_pullup(QI_LB60_GPIO_SD_CD);
-}
+static unsigned long pin_cfg_bias_disable[] = {
+	    PIN_CONFIG_BIAS_DISABLE,
+};
+
+static struct pinctrl_map pin_map[] __initdata = {
+	/* NAND pin configuration */
+	PIN_MAP_MUX_GROUP_DEFAULT("jz4740-nand",
+			"10010000.jz4740-pinctrl", "nand", "nand-cs1"),
+
+	/* fbdev pin configuration */
+	PIN_MAP_MUX_GROUP("jz4740-fb", PINCTRL_STATE_DEFAULT,
+			"10010000.jz4740-pinctrl", "lcd", "lcd-8bit"),
+	PIN_MAP_MUX_GROUP("jz4740-fb", PINCTRL_STATE_SLEEP,
+			"10010000.jz4740-pinctrl", "lcd", "lcd-no-pins"),
+
+	/* MMC pin configuration */
+	PIN_MAP_MUX_GROUP_DEFAULT("jz4740-mmc.0",
+			"10010000.jz4740-pinctrl", "mmc", "mmc-1bit"),
+	PIN_MAP_MUX_GROUP_DEFAULT("jz4740-mmc.0",
+			"10010000.jz4740-pinctrl", "mmc", "mmc-4bit"),
+	PIN_MAP_CONFIGS_PIN_DEFAULT("jz4740-mmc.0",
+			"10010000.jz4740-pinctrl", "PD0", pin_cfg_bias_disable),
+	PIN_MAP_CONFIGS_PIN_DEFAULT("jz4740-mmc.0",
+			"10010000.jz4740-pinctrl", "PD2", pin_cfg_bias_disable),
+
+	/* PWM pin configuration */
+	PIN_MAP_MUX_GROUP_DEFAULT("jz4740-pwm",
+			"10010000.jz4740-pinctrl", "pwm4", "pwm4"),
+};
+
 
 static int __init qi_lb60_init_platform_devices(void)
 {
@@ -469,6 +494,7 @@ static int __init qi_lb60_init_platform_devices(void)
 				ARRAY_SIZE(qi_lb60_spi_board_info));
 
 	pwm_add_table(qi_lb60_pwm_lookup, ARRAY_SIZE(qi_lb60_pwm_lookup));
+	pinctrl_register_mappings(pin_map, ARRAY_SIZE(pin_map));
 
 	return platform_add_devices(jz_platform_devices,
 					ARRAY_SIZE(jz_platform_devices));
@@ -479,8 +505,6 @@ static int __init qi_lb60_board_setup(void)
 {
 	printk(KERN_INFO "Qi Hardware JZ4740 QI LB60 setup\n");
 
-	board_gpio_setup();
-
 	if (qi_lb60_init_platform_devices())
 		panic("Failed to initialize platform devices");
 

arch/mips/jz4740/gpio.c

-/*
- *  Copyright (C) 2009-2010, Lars-Peter Clausen <lars@metafoo.de>
- *  JZ4740 platform GPIO support
- *
- *  This program is free software; you can redistribute it and/or modify it
- *  under  the terms of the GNU General	 Public License as published by the
- *  Free Software Foundation;  either version 2 of the License, or (at your
- *  option) any later version.
- *
- *  You should have received a copy of the GNU General Public License along
- *  with this program; if not, write to the Free Software Foundation, Inc.,
- *  675 Mass Ave, Cambridge, MA 02139, USA.
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/export.h>
-#include <linux/init.h>
-
-#include <linux/io.h>
-#include <linux/gpio/driver.h>
-/* FIXME: needed for gpio_request(), try to remove consumer API from driver */
-#include <linux/gpio.h>
-#include <linux/delay.h>
-#include <linux/interrupt.h>
-#include <linux/irqchip/ingenic.h>
-#include <linux/bitops.h>
-
-#include <linux/debugfs.h>
-#include <linux/seq_file.h>
-
-#include <asm/mach-jz4740/base.h>
-#include <asm/mach-jz4740/gpio.h>
-
-#define JZ4740_GPIO_BASE_A (32*0)
-#define JZ4740_GPIO_BASE_B (32*1)
-#define JZ4740_GPIO_BASE_C (32*2)
-#define JZ4740_GPIO_BASE_D (32*3)
-
-#define JZ4740_GPIO_NUM_A 32
-#define JZ4740_GPIO_NUM_B 32
-#define JZ4740_GPIO_NUM_C 31
-#define JZ4740_GPIO_NUM_D 32
-
-#define JZ4740_IRQ_GPIO_BASE_A (JZ4740_IRQ_GPIO(0) + JZ4740_GPIO_BASE_A)
-#define JZ4740_IRQ_GPIO_BASE_B (JZ4740_IRQ_GPIO(0) + JZ4740_GPIO_BASE_B)
-#define JZ4740_IRQ_GPIO_BASE_C (JZ4740_IRQ_GPIO(0) + JZ4740_GPIO_BASE_C)
-#define JZ4740_IRQ_GPIO_BASE_D (JZ4740_IRQ_GPIO(0) + JZ4740_GPIO_BASE_D)
-
-#define JZ_REG_GPIO_PIN			0x00
-#define JZ_REG_GPIO_DATA		0x10
-#define JZ_REG_GPIO_DATA_SET		0x14
-#define JZ_REG_GPIO_DATA_CLEAR		0x18
-#define JZ_REG_GPIO_MASK		0x20
-#define JZ_REG_GPIO_MASK_SET		0x24
-#define JZ_REG_GPIO_MASK_CLEAR		0x28
-#define JZ_REG_GPIO_PULL		0x30
-#define JZ_REG_GPIO_PULL_SET		0x34
-#define JZ_REG_GPIO_PULL_CLEAR		0x38
-#define JZ_REG_GPIO_FUNC		0x40
-#define JZ_REG_GPIO_FUNC_SET		0x44
-#define JZ_REG_GPIO_FUNC_CLEAR		0x48
-#define JZ_REG_GPIO_SELECT		0x50
-#define JZ_REG_GPIO_SELECT_SET		0x54
-#define JZ_REG_GPIO_SELECT_CLEAR	0x58
-#define JZ_REG_GPIO_DIRECTION		0x60
-#define JZ_REG_GPIO_DIRECTION_SET	0x64
-#define JZ_REG_GPIO_DIRECTION_CLEAR	0x68
-#define JZ_REG_GPIO_TRIGGER		0x70
-#define JZ_REG_GPIO_TRIGGER_SET		0x74
-#define JZ_REG_GPIO_TRIGGER_CLEAR	0x78
-#define JZ_REG_GPIO_FLAG		0x80
-#define JZ_REG_GPIO_FLAG_CLEAR		0x14
-
-#define GPIO_TO_BIT(gpio) BIT(gpio & 0x1f)
-#define GPIO_TO_REG(gpio, reg) (gpio_to_jz_gpio_chip(gpio)->base + (reg))
-#define CHIP_TO_REG(chip, reg) (gpio_chip_to_jz_gpio_chip(chip)->base + (reg))
-
-struct jz_gpio_chip {
-	unsigned int irq;
-	unsigned int irq_base;
-	uint32_t edge_trigger_both;
-
-	void __iomem *base;
-
-	struct gpio_chip gpio_chip;
-};
-
-static struct jz_gpio_chip jz4740_gpio_chips[];
-
-static inline struct jz_gpio_chip *gpio_to_jz_gpio_chip(unsigned int gpio)
-{
-	return &jz4740_gpio_chips[gpio >> 5];
-}
-
-static inline struct jz_gpio_chip *gpio_chip_to_jz_gpio_chip(struct gpio_chip *gc)
-{
-	return gpiochip_get_data(gc);
-}
-
-static inline struct jz_gpio_chip *irq_to_jz_gpio_chip(struct irq_data *data)
-{
-	struct irq_chip_generic *gc = irq_data_get_irq_chip_data(data);
-	return gc->private;
-}
-
-static inline void jz_gpio_write_bit(unsigned int gpio, unsigned int reg)
-{
-	writel(GPIO_TO_BIT(gpio), GPIO_TO_REG(gpio, reg));
-}
-
-int jz_gpio_set_function(int gpio, enum jz_gpio_function function)
-{
-	if (function == JZ_GPIO_FUNC_NONE) {
-		jz_gpio_write_bit(gpio, JZ_REG_GPIO_FUNC_CLEAR);
-		jz_gpio_write_bit(gpio, JZ_REG_GPIO_SELECT_CLEAR);
-		jz_gpio_write_bit(gpio, JZ_REG_GPIO_TRIGGER_CLEAR);
-	} else {
-		jz_gpio_write_bit(gpio, JZ_REG_GPIO_FUNC_SET);
-		jz_gpio_write_bit(gpio, JZ_REG_GPIO_TRIGGER_CLEAR);
-		switch (function) {
-		case JZ_GPIO_FUNC1:
-			jz_gpio_write_bit(gpio, JZ_REG_GPIO_SELECT_CLEAR);
-			break;
-		case JZ_GPIO_FUNC3:
-			jz_gpio_write_bit(gpio, JZ_REG_GPIO_TRIGGER_SET);
-		case JZ_GPIO_FUNC2: /* Falltrough */
-			jz_gpio_write_bit(gpio, JZ_REG_GPIO_SELECT_SET);
-			break;
-		default:
-			BUG();
-			break;
-		}
-	}
-
-	return 0;
-}
-EXPORT_SYMBOL_GPL(jz_gpio_set_function);
-
-int jz_gpio_bulk_request(const struct jz_gpio_bulk_request *request, size_t num)
-{
-	size_t i;
-	int ret;
-
-	for (i = 0; i < num; ++i, ++request) {
-		ret = gpio_request(request->gpio, request->name);
-		if (ret)
-			goto err;
-		jz_gpio_set_function(request->gpio, request->function);
-	}
-
-	return 0;
-
-err:
-	for (--request; i > 0; --i, --request) {
-		gpio_free(request->gpio);
-		jz_gpio_set_function(request->gpio, JZ_GPIO_FUNC_NONE);
-	}
-
-	return ret;
-}
-EXPORT_SYMBOL_GPL(jz_gpio_bulk_request);
-
-void jz_gpio_bulk_free(const struct jz_gpio_bulk_request *request, size_t num)
-{
-	size_t i;
-
-	for (i = 0; i < num; ++i, ++request) {
-		gpio_free(request->gpio);
-		jz_gpio_set_function(request->gpio, JZ_GPIO_FUNC_NONE);
-	}
-
-}
-EXPORT_SYMBOL_GPL(jz_gpio_bulk_free);
-
-void jz_gpio_bulk_suspend(const struct jz_gpio_bulk_request *request, size_t num)
-{
-	size_t i;
-
-	for (i = 0; i < num; ++i, ++request) {
-		jz_gpio_set_function(request->gpio, JZ_GPIO_FUNC_NONE);
-		jz_gpio_write_bit(request->gpio, JZ_REG_GPIO_DIRECTION_CLEAR);
-		jz_gpio_write_bit(request->gpio, JZ_REG_GPIO_PULL_SET);
-	}
-}
-EXPORT_SYMBOL_GPL(jz_gpio_bulk_suspend);
-
-void jz_gpio_bulk_resume(const struct jz_gpio_bulk_request *request, size_t num)
-{
-	size_t i;
-
-	for (i = 0; i < num; ++i, ++request)
-		jz_gpio_set_function(request->gpio, request->function);
-}
-EXPORT_SYMBOL_GPL(jz_gpio_bulk_resume);
-
-void jz_gpio_enable_pullup(unsigned gpio)
-{
-	jz_gpio_write_bit(gpio, JZ_REG_GPIO_PULL_CLEAR);
-}
-EXPORT_SYMBOL_GPL(jz_gpio_enable_pullup);
-
-void jz_gpio_disable_pullup(unsigned gpio)
-{
-	jz_gpio_write_bit(gpio, JZ_REG_GPIO_PULL_SET);
-}
-EXPORT_SYMBOL_GPL(jz_gpio_disable_pullup);
-
-static int jz_gpio_get_value(struct gpio_chip *chip, unsigned gpio)
-{
-	return !!(readl(CHIP_TO_REG(chip, JZ_REG_GPIO_PIN)) & BIT(gpio));
-}
-
-static void jz_gpio_set_value(struct gpio_chip *chip, unsigned gpio, int value)
-{
-	uint32_t __iomem *reg = CHIP_TO_REG(chip, JZ_REG_GPIO_DATA_SET);
-	reg += !value;
-	writel(BIT(gpio), reg);
-}
-
-static int jz_gpio_direction_output(struct gpio_chip *chip, unsigned gpio,
-	int value)
-{
-	writel(BIT(gpio), CHIP_TO_REG(chip, JZ_REG_GPIO_DIRECTION_SET));
-	jz_gpio_set_value(chip, gpio, value);
-
-	return 0;
-}
-
-static int jz_gpio_direction_input(struct gpio_chip *chip, unsigned gpio)
-{
-	writel(BIT(gpio), CHIP_TO_REG(chip, JZ_REG_GPIO_DIRECTION_CLEAR));
-
-	return 0;
-}
-
-static int jz_gpio_to_irq(struct gpio_chip *chip, unsigned gpio)
-{
-	struct jz_gpio_chip *jz_gpio = gpiochip_get_data(chip);
-
-	return jz_gpio->irq_base + gpio;
-}
-
-int jz_gpio_port_direction_input(int port, uint32_t mask)
-{
-	writel(mask, GPIO_TO_REG(port, JZ_REG_GPIO_DIRECTION_CLEAR));
-
-	return 0;
-}
-EXPORT_SYMBOL(jz_gpio_port_direction_input);
-
-int jz_gpio_port_direction_output(int port, uint32_t mask)
-{
-	writel(mask, GPIO_TO_REG(port, JZ_REG_GPIO_DIRECTION_SET));
-
-	return 0;
-}
-EXPORT_SYMBOL(jz_gpio_port_direction_output);
-
-void jz_gpio_port_set_value(int port, uint32_t value, uint32_t mask)
-{
-	writel(~value & mask, GPIO_TO_REG(port, JZ_REG_GPIO_DATA_CLEAR));
-	writel(value & mask, GPIO_TO_REG(port, JZ_REG_GPIO_DATA_SET));
-}
-EXPORT_SYMBOL(jz_gpio_port_set_value);
-
-uint32_t jz_gpio_port_get_value(int port, uint32_t mask)
-{
-	uint32_t value = readl(GPIO_TO_REG(port, JZ_REG_GPIO_PIN));
-
-	return value & mask;
-}
-EXPORT_SYMBOL(jz_gpio_port_get_value);
-
-#define IRQ_TO_BIT(irq) BIT((irq - JZ4740_IRQ_GPIO(0)) & 0x1f)
-
-static void jz_gpio_check_trigger_both(struct jz_gpio_chip *chip, unsigned int irq)
-{
-	uint32_t value;
-	void __iomem *reg;
-	uint32_t mask = IRQ_TO_BIT(irq);
-
-	if (!(chip->edge_trigger_both & mask))
-		return;
-
-	reg = chip->base;
-
-	value = readl(chip->base + JZ_REG_GPIO_PIN);
-	if (value & mask)
-		reg += JZ_REG_GPIO_DIRECTION_CLEAR;
-	else
-		reg += JZ_REG_GPIO_DIRECTION_SET;
-
-	writel(mask, reg);
-}
-
-static void jz_gpio_irq_demux_handler(struct irq_desc *desc)
-{
-	uint32_t flag;
-	unsigned int gpio_irq;
-	struct jz_gpio_chip *chip = irq_desc_get_handler_data(desc);
-
-	flag = readl(chip->base + JZ_REG_GPIO_FLAG);
-	if (!flag)
-		return;
-
-	gpio_irq = chip->irq_base + __fls(flag);
-
-	jz_gpio_check_trigger_both(chip, gpio_irq);
-
-	generic_handle_irq(gpio_irq);
-};
-
-static inline void jz_gpio_set_irq_bit(struct irq_data *data, unsigned int reg)
-{
-	struct jz_gpio_chip *chip = irq_to_jz_gpio_chip(data);
-	writel(IRQ_TO_BIT(data->irq), chip->base + reg);
-}
-
-static void jz_gpio_irq_unmask(struct irq_data *data)
-{
-	struct jz_gpio_chip *chip = irq_to_jz_gpio_chip(data);
-
-	jz_gpio_check_trigger_both(chip, data->irq);
-	irq_gc_unmask_enable_reg(data);
-};
-
-/* TODO: Check if function is gpio */
-static unsigned int jz_gpio_irq_startup(struct irq_data *data)
-{
-	jz_gpio_set_irq_bit(data, JZ_REG_GPIO_SELECT_SET);
-	jz_gpio_irq_unmask(data);
-	return 0;
-}
-
-static void jz_gpio_irq_shutdown(struct irq_data *data)
-{
-	irq_gc_mask_disable_reg(data);
-
-	/* Set direction to input */
-	jz_gpio_set_irq_bit(data, JZ_REG_GPIO_DIRECTION_CLEAR);
-	jz_gpio_set_irq_bit(data, JZ_REG_GPIO_SELECT_CLEAR);
-}
-
-static int jz_gpio_irq_set_type(struct irq_data *data, unsigned int flow_type)
-{
-	struct jz_gpio_chip *chip = irq_to_jz_gpio_chip(data);
-	unsigned int irq = data->irq;
-
-	if (flow_type == IRQ_TYPE_EDGE_BOTH) {
-		uint32_t value = readl(chip->base + JZ_REG_GPIO_PIN);
-		if (value & IRQ_TO_BIT(irq))
-			flow_type = IRQ_TYPE_EDGE_FALLING;
-		else
-			flow_type = IRQ_TYPE_EDGE_RISING;
-		chip->edge_trigger_both |= IRQ_TO_BIT(irq);
-	} else {
-		chip->edge_trigger_both &= ~IRQ_TO_BIT(irq);
-	}
-
-	switch (flow_type) {
-	case IRQ_TYPE_EDGE_RISING:
-		jz_gpio_set_irq_bit(data, JZ_REG_GPIO_DIRECTION_SET);
-		jz_gpio_set_irq_bit(data, JZ_REG_GPIO_TRIGGER_SET);
-		break;
-	case IRQ_TYPE_EDGE_FALLING:
-		jz_gpio_set_irq_bit(data, JZ_REG_GPIO_DIRECTION_CLEAR);
-		jz_gpio_set_irq_bit(data, JZ_REG_GPIO_TRIGGER_SET);
-		break;
-	case IRQ_TYPE_LEVEL_HIGH:
-		jz_gpio_set_irq_bit(data, JZ_REG_GPIO_DIRECTION_SET);
-		jz_gpio_set_irq_bit(data, JZ_REG_GPIO_TRIGGER_CLEAR);
-		break;
-	case IRQ_TYPE_LEVEL_LOW:
-		jz_gpio_set_irq_bit(data, JZ_REG_GPIO_DIRECTION_CLEAR);
-		jz_gpio_set_irq_bit(data, JZ_REG_GPIO_TRIGGER_CLEAR);
-		break;
-	default:
-		return -EINVAL;
-	}
-
-	return 0;
-}
-
-static int jz_gpio_irq_set_wake(struct irq_data *data, unsigned int on)
-{
-	struct jz_gpio_chip *chip = irq_to_jz_gpio_chip(data);
-
-	irq_gc_set_wake(data, on);
-	irq_set_irq_wake(chip->irq, on);
-
-	return 0;
-}
-
-#define JZ4740_GPIO_CHIP(_bank) { \
-	.irq_base = JZ4740_IRQ_GPIO_BASE_ ## _bank, \
-	.gpio_chip = { \
-		.label = "Bank " # _bank, \
-		.owner = THIS_MODULE, \
-		.set = jz_gpio_set_value, \
-		.get = jz_gpio_get_value, \
-		.direction_output = jz_gpio_direction_output, \
-		.direction_input = jz_gpio_direction_input, \
-		.to_irq = jz_gpio_to_irq, \
-		.base = JZ4740_GPIO_BASE_ ## _bank, \
-		.ngpio = JZ4740_GPIO_NUM_ ## _bank, \
-	}, \
-}
-
-static struct jz_gpio_chip jz4740_gpio_chips[] = {
-	JZ4740_GPIO_CHIP(A),
-	JZ4740_GPIO_CHIP(B),
-	JZ4740_GPIO_CHIP(C),
-	JZ4740_GPIO_CHIP(D),
-};
-
-static void jz4740_gpio_chip_init(struct jz_gpio_chip *chip, unsigned int id)
-{
-	struct irq_chip_generic *gc;
-	struct irq_chip_type *ct;
-
-	chip->base = ioremap(JZ4740_GPIO_BASE_ADDR + (id * 0x100), 0x100);
-
-	chip->irq = JZ4740_IRQ_INTC_GPIO(id);
-	irq_set_chained_handler_and_data(chip->irq,
-					 jz_gpio_irq_demux_handler, chip);
-
-	gc = irq_alloc_generic_chip(chip->gpio_chip.label, 1, chip->irq_base,
-		chip->base, handle_level_irq);
-
-	gc->wake_enabled = IRQ_MSK(chip->gpio_chip.ngpio);
-	gc->private = chip;
-
-	ct = gc->chip_types;
-	ct->regs.enable = JZ_REG_GPIO_MASK_CLEAR;
-	ct->regs.disable = JZ_REG_GPIO_MASK_SET;
-	ct->regs.ack = JZ_REG_GPIO_FLAG_CLEAR;
-
-	ct->chip.name = "GPIO";
-	ct->chip.irq_mask = irq_gc_mask_disable_reg;
-	ct->chip.irq_unmask = jz_gpio_irq_unmask;
-	ct->chip.irq_ack = irq_gc_ack_set_bit;
-	ct->chip.irq_suspend = ingenic_intc_irq_suspend;
-	ct->chip.irq_resume = ingenic_intc_irq_resume;
-	ct->chip.irq_startup = jz_gpio_irq_startup;
-	ct->chip.irq_shutdown = jz_gpio_irq_shutdown;
-	ct->chip.irq_set_type = jz_gpio_irq_set_type;
-	ct->chip.irq_set_wake = jz_gpio_irq_set_wake;
-	ct->chip.flags = IRQCHIP_SET_TYPE_MASKED;
-
-	irq_setup_generic_chip(gc, IRQ_MSK(chip->gpio_chip.ngpio),
-		IRQ_GC_INIT_NESTED_LOCK, 0, IRQ_NOPROBE | IRQ_LEVEL);
-
-	gpiochip_add_data(&chip->gpio_chip, chip);
-}
-
-static int __init jz4740_gpio_init(void)
-{
-	unsigned int i;
-
-	for (i = 0; i < ARRAY_SIZE(jz4740_gpio_chips); ++i)
-		jz4740_gpio_chip_init(&jz4740_gpio_chips[i], i);
-
-	printk(KERN_INFO "JZ4740 GPIO initialized\n");
-
-	return 0;
-}
-arch_initcall(jz4740_gpio_init);
-
-#ifdef CONFIG_DEBUG_FS
-
-static inline void gpio_seq_reg(struct seq_file *s, struct jz_gpio_chip *chip,
-	const char *name, unsigned int reg)
-{
-	seq_printf(s, "\t%s: %08x\n", name, readl(chip->base + reg));
-}
-
-static int gpio_regs_show(struct seq_file *s, void *unused)
-{
-	struct jz_gpio_chip *chip = jz4740_gpio_chips;
-	int i;
-
-	for (i = 0; i < ARRAY_SIZE(jz4740_gpio_chips); ++i, ++chip) {
-		seq_printf(s, "==GPIO %d==\n", i);
-		gpio_seq_reg(s, chip, "Pin", JZ_REG_GPIO_PIN);
-		gpio_seq_reg(s, chip, "Data", JZ_REG_GPIO_DATA);
-		gpio_seq_reg(s, chip, "Mask", JZ_REG_GPIO_MASK);
-		gpio_seq_reg(s, chip, "Pull", JZ_REG_GPIO_PULL);
-		gpio_seq_reg(s, chip, "Func", JZ_REG_GPIO_FUNC);
-		gpio_seq_reg(s, chip, "Select", JZ_REG_GPIO_SELECT);
-		gpio_seq_reg(s, chip, "Direction", JZ_REG_GPIO_DIRECTION);
-		gpio_seq_reg(s, chip, "Trigger", JZ_REG_GPIO_TRIGGER);
-		gpio_seq_reg(s, chip, "Flag", JZ_REG_GPIO_FLAG);
-	}
-
-	return 0;
-}
-
-static int gpio_regs_open(struct inode *inode, struct file *file)
-{
-	return single_open(file, gpio_regs_show, NULL);
-}
-
-static const struct file_operations gpio_regs_operations = {
-	.open		= gpio_regs_open,
-	.read		= seq_read,
-	.llseek		= seq_lseek,
-	.release	= single_release,
-};
-
-static int __init gpio_debugfs_init(void)
-{
-	(void) debugfs_create_file("jz_regs_gpio", S_IFREG | S_IRUGO,
-				NULL, NULL, &gpio_regs_operations);
-	return 0;
-}
-subsys_initcall(gpio_debugfs_init);
-
-#endif

drivers/gpio/Kconfig

@@ -242,6 +242,16 @@ config GPIO_ICH
 
 	  If unsure, say N.
 
+config GPIO_INGENIC
+	tristate "Ingenic JZ47xx SoCs GPIO support"
+	depends on MACH_INGENIC || COMPILE_TEST
+	select GPIOLIB_IRQCHIP
+	help
+	  Say yes here to support the GPIO functionality present on the
+	  JZ4740 and JZ4780 SoCs from Ingenic.
+
+	  If unsure, say N.
+
 config GPIO_IOP
 	tristate "Intel IOP GPIO"
 	depends on ARCH_IOP32X || ARCH_IOP33X || COMPILE_TEST

drivers/gpio/Makefile

@@ -55,6 +55,7 @@ obj-$(CONFIG_GPIO_GPIO_MM)	+= gpio-gpio-mm.o
 obj-$(CONFIG_GPIO_GRGPIO)	+= gpio-grgpio.o
 obj-$(CONFIG_HTC_EGPIO)		+= gpio-htc-egpio.o
 obj-$(CONFIG_GPIO_ICH)		+= gpio-ich.o
+obj-$(CONFIG_GPIO_INGENIC)	+= gpio-ingenic.o
 obj-$(CONFIG_GPIO_IOP)		+= gpio-iop.o
 obj-$(CONFIG_GPIO_IT87)		+= gpio-it87.o
 obj-$(CONFIG_GPIO_JANZ_TTL)	+= gpio-janz-ttl.o

drivers/gpio/gpio-ingenic.c

+/*
+ * Ingenic JZ47xx GPIO driver
+ *
+ * Copyright (c) 2017 Paul Cercueil <paul@crapouillou.net>
+ *
+ * License terms: GNU General Public License (GPL) version 2
+ */
+
+#include <linux/gpio/driver.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/of_address.h>
+#include <linux/of_device.h>
+#include <linux/of_irq.h>
+#include <linux/pinctrl/consumer.h>
+#include <linux/regmap.h>
+
+#define GPIO_PIN	0x00
+#define GPIO_MSK	0x20
+
+#define JZ4740_GPIO_DATA	0x10
+#define JZ4740_GPIO_SELECT	0x50
+#define JZ4740_GPIO_DIR		0x60
+#define JZ4740_GPIO_TRIG	0x70
+#define JZ4740_GPIO_FLAG	0x80
+
+#define JZ4770_GPIO_INT		0x10
+#define JZ4770_GPIO_PAT1	0x30
+#define JZ4770_GPIO_PAT0	0x40
+#define JZ4770_GPIO_FLAG	0x50
+
+#define REG_SET(x) ((x) + 0x4)
+#define REG_CLEAR(x) ((x) + 0x8)
+
+enum jz_version {
+	ID_JZ4740,
+	ID_JZ4770,
+	ID_JZ4780,
+};
+
+struct ingenic_gpio_chip {
+	struct regmap *map;
+	struct gpio_chip gc;
+	struct irq_chip irq_chip;
+	unsigned int irq, reg_base;
+	enum jz_version version;
+};
+
+static u32 gpio_ingenic_read_reg(struct ingenic_gpio_chip *jzgc, u8 reg)
+{
+	unsigned int val;
+
+	regmap_read(jzgc->map, jzgc->reg_base + reg, &val);
+
+	return (u32) val;
+}
+
+static void gpio_ingenic_set_bit(struct ingenic_gpio_chip *jzgc,
+		u8 reg, u8 offset, bool set)
+{
+	if (set)
+		reg = REG_SET(reg);
+	else
+		reg = REG_CLEAR(reg);
+
+	regmap_write(jzgc->map, jzgc->reg_base + reg, BIT(offset));
+}
+
+static inline bool gpio_get_value(struct ingenic_gpio_chip *jzgc, u8 offset)
+{
+	unsigned int val = gpio_ingenic_read_reg(jzgc, GPIO_PIN);
+
+	return !!(val & BIT(offset));
+}
+
+static void gpio_set_value(struct ingenic_gpio_chip *jzgc, u8 offset, int value)
+{
+	if (jzgc->version >= ID_JZ4770)
+		gpio_ingenic_set_bit(jzgc, JZ4770_GPIO_PAT0, offset, !!value);
+	else
+		gpio_ingenic_set_bit(jzgc, JZ4740_GPIO_DATA, offset, !!value);
+}
+
+static void irq_set_type(struct ingenic_gpio_chip *jzgc,
+		u8 offset, unsigned int type)
+{
+	u8 reg1, reg2;
+
+	if (jzgc->version >= ID_JZ4770) {
+		reg1 = JZ4770_GPIO_PAT1;
+		reg2 = JZ4770_GPIO_PAT0;
+	} else {
+		reg1 = JZ4740_GPIO_TRIG;
+		reg2 = JZ4740_GPIO_DIR;
+	}
+
+	switch (type) {
+	case IRQ_TYPE_EDGE_RISING:
+		gpio_ingenic_set_bit(jzgc, reg2, offset, true);
+		gpio_ingenic_set_bit(jzgc, reg1, offset, true);
+		break;
+	case IRQ_TYPE_EDGE_FALLING:
+		gpio_ingenic_set_bit(jzgc, reg2, offset, false);
+		gpio_ingenic_set_bit(jzgc, reg1, offset, true);
+		break;
+	case IRQ_TYPE_LEVEL_HIGH:
+		gpio_ingenic_set_bit(jzgc, reg2, offset, true);
+		gpio_ingenic_set_bit(jzgc, reg1, offset, false);
+		break;
+	case IRQ_TYPE_LEVEL_LOW:
+	default:
+		gpio_ingenic_set_bit(jzgc, reg2, offset, false);
+		gpio_ingenic_set_bit(jzgc, reg1, offset, false);
+		break;
+	}
+}
+
+static void ingenic_gpio_irq_mask(struct irq_data *irqd)
+{
+	struct gpio_chip *gc = irq_data_get_irq_chip_data(irqd);
+	struct ingenic_gpio_chip *jzgc = gpiochip_get_data(gc);
+
+	gpio_ingenic_set_bit(jzgc, GPIO_MSK, irqd->hwirq, true);
+}
+
+static void ingenic_gpio_irq_unmask(struct irq_data *irqd)
+{
+	struct gpio_chip *gc = irq_data_get_irq_chip_data(irqd);
+	struct ingenic_gpio_chip *jzgc = gpiochip_get_data(gc);
+
+	gpio_ingenic_set_bit(jzgc, GPIO_MSK, irqd->hwirq, false);
+}
+
+static void ingenic_gpio_irq_enable(struct irq_data *irqd)
+{
+	struct gpio_chip *gc = irq_data_get_irq_chip_data(irqd);
+	struct ingenic_gpio_chip *jzgc = gpiochip_get_data(gc);
+	int irq = irqd->hwirq;
+
+	if (jzgc->version >= ID_JZ4770)
+		gpio_ingenic_set_bit(jzgc, JZ4770_GPIO_INT, irq, true);
+	else
+		gpio_ingenic_set_bit(jzgc, JZ4740_GPIO_SELECT, irq, true);
+
+	ingenic_gpio_irq_unmask(irqd);
+}
+
+static void ingenic_gpio_irq_disable(struct irq_data *irqd)
+{
+	struct gpio_chip *gc = irq_data_get_irq_chip_data(irqd);
+	struct ingenic_gpio_chip *jzgc = gpiochip_get_data(gc);
+	int irq = irqd->hwirq;
+
+	ingenic_gpio_irq_mask(irqd);
+
+	if (jzgc->version >= ID_JZ4770)
+		gpio_ingenic_set_bit(jzgc, JZ4770_GPIO_INT, irq, false);
+	else
+		gpio_ingenic_set_bit(jzgc, JZ4740_GPIO_SELECT, irq, false);
+}
+
+static void ingenic_gpio_irq_ack(struct irq_data *irqd)
+{
+	struct gpio_chip *gc = irq_data_get_irq_chip_data(irqd);
+	struct ingenic_gpio_chip *jzgc = gpiochip_get_data(gc);
+	int irq = irqd->hwirq;
+	bool high;
+
+	if (irqd_get_trigger_type(irqd) == IRQ_TYPE_EDGE_BOTH) {
+		/*
+		 * Switch to an interrupt for the opposite edge to the one that
+		 * triggered the interrupt being ACKed.
+		 */
+		high = gpio_get_value(jzgc, irq);
+		if (high)
+			irq_set_type(jzgc, irq, IRQ_TYPE_EDGE_FALLING);
+		else
+			irq_set_type(jzgc, irq, IRQ_TYPE_EDGE_RISING);
+	}
+
+	if (jzgc->version >= ID_JZ4770)
+		gpio_ingenic_set_bit(jzgc, JZ4770_GPIO_FLAG, irq, false);
+	else
+		gpio_ingenic_set_bit(jzgc, JZ4740_GPIO_DATA, irq, true);
+}
+
+static int ingenic_gpio_irq_set_type(struct irq_data *irqd, unsigned int type)
+{
+	struct gpio_chip *gc = irq_data_get_irq_chip_data(irqd);
+	struct ingenic_gpio_chip *jzgc = gpiochip_get_data(gc);
+
+	switch (type) {
+	case IRQ_TYPE_EDGE_BOTH:
+	case IRQ_TYPE_EDGE_RISING:
+	case IRQ_TYPE_EDGE_FALLING:
+		irq_set_handler_locked(irqd, handle_edge_irq);
+		break;
+	case IRQ_TYPE_LEVEL_HIGH:
+	case IRQ_TYPE_LEVEL_LOW:
+		irq_set_handler_locked(irqd, handle_level_irq);
+		break;
+	default:
+		irq_set_handler_locked(irqd, handle_bad_irq);
+	}
+
+	if (type == IRQ_TYPE_EDGE_BOTH) {
+		/*
+		 * The hardware does not support interrupts on both edges. The
+		 * best we can do is to set up a single-edge interrupt and then
+		 * switch to the opposing edge when ACKing the interrupt.
+		 */
+		bool high = gpio_get_value(jzgc, irqd->hwirq);
+
+		type = high ? IRQ_TYPE_EDGE_FALLING : IRQ_TYPE_EDGE_RISING;
+	}
+
+	irq_set_type(jzgc, irqd->hwirq, type);
+	return 0;
+}
+
+static int ingenic_gpio_irq_set_wake(struct irq_data *irqd, unsigned int on)
+{
+	struct gpio_chip *gc = irq_data_get_irq_chip_data(irqd);
+	struct ingenic_gpio_chip *jzgc = gpiochip_get_data(gc);
+
+	return irq_set_irq_wake(jzgc->irq, on);
+}
+
+static void ingenic_gpio_irq_handler(struct irq_desc *desc)
+{
+	struct gpio_chip *gc = irq_desc_get_handler_data(desc);
+	struct ingenic_gpio_chip *jzgc = gpiochip_get_data(gc);
+	struct irq_chip *irq_chip = irq_data_get_irq_chip(&desc->irq_data);
+	unsigned long flag, i;
+
+	chained_irq_enter(irq_chip, desc);
+
+	if (jzgc->version >= ID_JZ4770)
+		flag = gpio_ingenic_read_reg(jzgc, JZ4770_GPIO_FLAG);
+	else
+		flag = gpio_ingenic_read_reg(jzgc, JZ4740_GPIO_FLAG);
+
+	for_each_set_bit(i, &flag, 32)
+		generic_handle_irq(irq_linear_revmap(gc->irqdomain, i));
+	chained_irq_exit(irq_chip, desc);
+}
+
+static void ingenic_gpio_set(struct gpio_chip *gc,
+		unsigned int offset, int value)
+{
+	struct ingenic_gpio_chip *jzgc = gpiochip_get_data(gc);
+
+	gpio_set_value(jzgc, offset, value);
+}
+
+static int ingenic_gpio_get(struct gpio_chip *gc, unsigned int offset)
+{
+	struct ingenic_gpio_chip *jzgc = gpiochip_get_data(gc);
+
+	return (int) gpio_get_value(jzgc, offset);
+}
+
+static int ingenic_gpio_direction_input(struct gpio_chip *gc,
+		unsigned int offset)
+{
+	return pinctrl_gpio_direction_input(gc->base + offset);
+}
+
+static int ingenic_gpio_direction_output(struct gpio_chip *gc,
+		unsigned int offset, int value)
+{
+	ingenic_gpio_set(gc, offset, value);
+	return pinctrl_gpio_direction_output(gc->base + offset);
+}
+
+static const struct of_device_id ingenic_gpio_of_match[] = {
+	{ .compatible = "ingenic,jz4740-gpio", .data = (void *)ID_JZ4740 },
+	{ .compatible = "ingenic,jz4770-gpio", .data = (void *)ID_JZ4770 },
+	{ .compatible = "ingenic,jz4780-gpio", .data = (void *)ID_JZ4780 },
+	{},
+};
+MODULE_DEVICE_TABLE(of, ingenic_gpio_of_match);
+
+static int ingenic_gpio_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	const struct of_device_id *of_id = of_match_device(
+			ingenic_gpio_of_match, dev);
+	struct ingenic_gpio_chip *jzgc;
+	u32 bank;
+	int err;
+
+	jzgc = devm_kzalloc(dev, sizeof(*jzgc), GFP_KERNEL);
+	if (!jzgc)
+		return -ENOMEM;
+
+	jzgc->map = dev_get_drvdata(dev->parent);
+	if (!jzgc->map) {
+		dev_err(dev, "Cannot get parent regmap\n");
+		return -ENXIO;
+	}
+
+	err = of_property_read_u32(dev->of_node, "reg", &bank);
+	if (err) {
+		dev_err(dev, "Cannot read \"reg\" property: %i\n", err);
+		return err;
+	}
+
+	jzgc->reg_base = bank * 0x100;
+
+	jzgc->gc.label = devm_kasprintf(dev, GFP_KERNEL, "GPIO%c", 'A' + bank);
+	if (!jzgc->gc.label)
+		return -ENOMEM;
+
+	/* DO NOT EXPAND THIS: FOR BACKWARD GPIO NUMBERSPACE COMPATIBIBILITY
+	 * ONLY: WORK TO TRANSITION CONSUMERS TO USE THE GPIO DESCRIPTOR API IN
+	 * <linux/gpio/consumer.h> INSTEAD.
+	 */
+	jzgc->gc.base = bank * 32;
+
+	jzgc->gc.ngpio = 32;
+	jzgc->gc.parent = dev;
+	jzgc->gc.of_node = dev->of_node;
+	jzgc->gc.owner = THIS_MODULE;
+	jzgc->version = (enum jz_version)of_id->data;
+
+	jzgc->gc.set = ingenic_gpio_set;
+	jzgc->gc.get = ingenic_gpio_get;
+	jzgc->gc.direction_input = ingenic_gpio_direction_input;
+	jzgc->gc.direction_output = ingenic_gpio_direction_output;
+
+	if (of_property_read_bool(dev->of_node, "gpio-ranges")) {
+		jzgc->gc.request = gpiochip_generic_request;
+		jzgc->gc.free = gpiochip_generic_free;
+	}
+
+	err = devm_gpiochip_add_data(dev, &jzgc->gc, jzgc);
+	if (err)
+		return err;
+
+	jzgc->irq = irq_of_parse_and_map(dev->of_node, 0);
+	if (!jzgc->irq)
+		return -EINVAL;
+
+	jzgc->irq_chip.name = jzgc->gc.label;
+	jzgc->irq_chip.irq_enable = ingenic_gpio_irq_enable;
+	jzgc->irq_chip.irq_disable = ingenic_gpio_irq_disable;
+	jzgc->irq_chip.irq_unmask = ingenic_gpio_irq_unmask;
+	jzgc->irq_chip.irq_mask = ingenic_gpio_irq_mask;
+	jzgc->irq_chip.irq_ack = ingenic_gpio_irq_ack;
+	jzgc->irq_chip.irq_set_type = ingenic_gpio_irq_set_type;
+	jzgc->irq_chip.irq_set_wake = ingenic_gpio_irq_set_wake;
+	jzgc->irq_chip.flags = IRQCHIP_MASK_ON_SUSPEND;
+
+	err = gpiochip_irqchip_add(&jzgc->gc, &jzgc->irq_chip, 0,
+			handle_level_irq, IRQ_TYPE_NONE);
+	if (err)
+		return err;
+
+	gpiochip_set_chained_irqchip(&jzgc->gc, &jzgc->irq_chip,
+			jzgc->irq, ingenic_gpio_irq_handler);
+	return 0;
+}
+
+static int ingenic_gpio_remove(struct platform_device *pdev)
+{
+	return 0;
+}
+
+static struct platform_driver ingenic_gpio_driver = {
+	.driver = {
+		.name = "gpio-ingenic",
+		.of_match_table = of_match_ptr(ingenic_gpio_of_match),
+	},
+	.probe = ingenic_gpio_probe,
+	.remove = ingenic_gpio_remove,
+};
+
+static int __init ingenic_gpio_drv_register(void)
+{
+	return platform_driver_register(&ingenic_gpio_driver);
+}
+subsys_initcall(ingenic_gpio_drv_register);
+
+static void __exit ingenic_gpio_drv_unregister(void)
+{
+	platform_driver_unregister(&ingenic_gpio_driver);
+}
+module_exit(ingenic_gpio_drv_unregister);
+
+MODULE_AUTHOR("Paul Cercueil <paul@crapouillou.net>");
+MODULE_DESCRIPTION("Ingenic JZ47xx GPIO driver");
+MODULE_LICENSE("GPL");

drivers/mmc/host/jz4740_mmc.c

@@ -20,6 +20,7 @@
 #include <linux/irq.h>
 #include <linux/interrupt.h>
 #include <linux/module.h>
+#include <linux/pinctrl/consumer.h>
 #include <linux/platform_device.h>
 #include <linux/delay.h>
 #include <linux/scatterlist.h>
@@ -27,7 +28,6 @@
 
 #include <linux/bitops.h>
 #include <linux/gpio.h>
-#include <asm/mach-jz4740/gpio.h>
 #include <asm/cacheflush.h>
 #include <linux/dma-mapping.h>
 #include <linux/dmaengine.h>
@@ -901,15 +901,6 @@ static const struct mmc_host_ops jz4740_mmc_ops = {
 	.enable_sdio_irq = jz4740_mmc_enable_sdio_irq,
 };
 
-static const struct jz_gpio_bulk_request jz4740_mmc_pins[] = {
-	JZ_GPIO_BULK_PIN(MSC_CMD),
-	JZ_GPIO_BULK_PIN(MSC_CLK),
-	JZ_GPIO_BULK_PIN(MSC_DATA0),
-	JZ_GPIO_BULK_PIN(MSC_DATA1),
-	JZ_GPIO_BULK_PIN(MSC_DATA2),
-	JZ_GPIO_BULK_PIN(MSC_DATA3),
-};
-
 static int jz4740_mmc_request_gpio(struct device *dev, int gpio,
 	const char *name, bool output, int value)
 {
@@ -973,15 +964,6 @@ static void jz4740_mmc_free_gpios(struct platform_device *pdev)
 		gpio_free(pdata->gpio_power);
 }
 
-static inline size_t jz4740_mmc_num_pins(struct jz4740_mmc_host *host)
-{
-	size_t num_pins = ARRAY_SIZE(jz4740_mmc_pins);
-	if (host->pdata && host->pdata->data_1bit)
-		num_pins -= 3;
-
-	return num_pins;
-}
-
 static int jz4740_mmc_probe(struct platform_device* pdev)
 {
 	int ret;
@@ -1022,15 +1004,9 @@ static int jz4740_mmc_probe(struct platform_device* pdev)
 		goto err_free_host;
 	}
 
-	ret = jz_gpio_bulk_request(jz4740_mmc_pins, jz4740_mmc_num_pins(host));
-	if (ret) {
-		dev_err(&pdev->dev, "Failed to request mmc pins: %d\n", ret);
-		goto err_free_host;
-	}
-
 	ret = jz4740_mmc_request_gpios(mmc, pdev);
 	if (ret)
-		goto err_gpio_bulk_free;
+		goto err_release_dma;
 
 	mmc->ops = &jz4740_mmc_ops;
 	mmc->f_min = JZ_MMC_CLK_RATE / 128;
@@ -1086,10 +1062,9 @@ static int jz4740_mmc_probe(struct platform_device* pdev)
 	free_irq(host->irq, host);
 err_free_gpios:
 	jz4740_mmc_free_gpios(pdev);
-err_gpio_bulk_free:
+err_release_dma:
 	if (host->use_dma)
 		jz4740_mmc_release_dma_channels(host);
-	jz_gpio_bulk_free(jz4740_mmc_pins, jz4740_mmc_num_pins(host));
 err_free_host:
 	mmc_free_host(mmc);
 
@@ -1109,7 +1084,6 @@ static int jz4740_mmc_remove(struct platform_device *pdev)
 	free_irq(host->irq, host);
 
 	jz4740_mmc_free_gpios(pdev);
-	jz_gpio_bulk_free(jz4740_mmc_pins, jz4740_mmc_num_pins(host));
 
 	if (host->use_dma)
 		jz4740_mmc_release_dma_channels(host);
@@ -1123,20 +1097,12 @@ static int jz4740_mmc_remove(struct platform_device *pdev)
 
 static int jz4740_mmc_suspend(struct device *dev)
 {
-	struct jz4740_mmc_host *host = dev_get_drvdata(dev);
-
-	jz_gpio_bulk_suspend(jz4740_mmc_pins, jz4740_mmc_num_pins(host));
-
-	return 0;
+	return pinctrl_pm_select_sleep_state(dev);
 }
 
 static int jz4740_mmc_resume(struct device *dev)
 {
-	struct jz4740_mmc_host *host = dev_get_drvdata(dev);
-
-	jz_gpio_bulk_resume(jz4740_mmc_pins, jz4740_mmc_num_pins(host));
-
-	return 0;
+	return pinctrl_pm_select_default_state(dev);
 }
 
 static SIMPLE_DEV_PM_OPS(jz4740_mmc_pm_ops, jz4740_mmc_suspend,

drivers/mtd/nand/jz4740_nand.c

@@ -25,7 +25,6 @@
 
 #include <linux/gpio.h>
 
-#include <asm/mach-jz4740/gpio.h>
 #include <asm/mach-jz4740/jz4740_nand.h>
 
 #define JZ_REG_NAND_CTRL	0x50
@@ -310,34 +309,20 @@ static int jz_nand_detect_bank(struct platform_device *pdev,
 			       uint8_t *nand_dev_id)
 {
 	int ret;
-	int gpio;
-	char gpio_name[9];
 	char res_name[6];
 	uint32_t ctrl;
 	struct nand_chip *chip = &nand->chip;
 	struct mtd_info *mtd = nand_to_mtd(chip);
 
-	/* Request GPIO port. */
-	gpio = JZ_GPIO_MEM_CS0 + bank - 1;
-	sprintf(gpio_name, "NAND CS%d", bank);
-	ret = gpio_request(gpio, gpio_name);
-	if (ret) {
-		dev_warn(&pdev->dev,
-			"Failed to request %s gpio %d: %d\n",
-			gpio_name, gpio, ret);
-		goto notfound_gpio;
-	}
-
 	/* Request I/O resource. */
 	sprintf(res_name, "bank%d", bank);
 	ret = jz_nand_ioremap_resource(pdev, res_name,
 					&nand->bank_mem[bank - 1],
 					&nand->bank_base[bank - 1]);
 	if (ret)
-		goto notfound_resource;
+		return ret;
 
 	/* Enable chip in bank. */
-	jz_gpio_set_function(gpio, JZ_GPIO_FUNC_MEM_CS0);
 	ctrl = readl(nand->base + JZ_REG_NAND_CTRL);
 	ctrl |= JZ_NAND_CTRL_ENABLE_CHIP(bank - 1);
 	writel(ctrl, nand->base + JZ_REG_NAND_CTRL);
@@ -377,12 +362,8 @@ static int jz_nand_detect_bank(struct platform_device *pdev,
 	dev_info(&pdev->dev, "No chip found on bank %i\n", bank);
 	ctrl &= ~(JZ_NAND_CTRL_ENABLE_CHIP(bank - 1));
 	writel(ctrl, nand->base + JZ_REG_NAND_CTRL);
-	jz_gpio_set_function(gpio, JZ_GPIO_FUNC_NONE);
 	jz_nand_iounmap_resource(nand->bank_mem[bank - 1],
 				 nand->bank_base[bank - 1]);
-notfound_resource:
-	gpio_free(gpio);
-notfound_gpio:
 	return ret;
 }
 
@@ -503,7 +484,6 @@ static int jz_nand_probe(struct platform_device *pdev)
 err_unclaim_banks:
 	while (chipnr--) {
 		unsigned char bank = nand->banks[chipnr];
-		gpio_free(JZ_GPIO_MEM_CS0 + bank - 1);
 		jz_nand_iounmap_resource(nand->bank_mem[bank - 1],
 					 nand->bank_base[bank - 1]);
 	}
@@ -530,7 +510,6 @@ static int jz_nand_remove(struct platform_device *pdev)
 		if (bank != 0) {
 			jz_nand_iounmap_resource(nand->bank_mem[bank - 1],
 						 nand->bank_base[bank - 1]);
-			gpio_free(JZ_GPIO_MEM_CS0 + bank - 1);
 		}
 	}
 

drivers/pinctrl/Kconfig

@@ -296,6 +296,15 @@ config PINCTRL_ZYNQ
 	help
 	  This selects the pinctrl driver for Xilinx Zynq.
 
+config PINCTRL_INGENIC
+	bool "Pinctrl driver for the Ingenic JZ47xx SoCs"
+	default y
+	depends on MACH_INGENIC || COMPILE_TEST
+	select GENERIC_PINCONF
+	select GENERIC_PINCTRL_GROUPS
+	select GENERIC_PINMUX_FUNCTIONS
+	select REGMAP_MMIO
+
 source "drivers/pinctrl/aspeed/Kconfig"
 source "drivers/pinctrl/bcm/Kconfig"
 source "drivers/pinctrl/berlin/Kconfig"

drivers/pinctrl/Makefile

@@ -39,6 +39,7 @@ obj-$(CONFIG_PINCTRL_LPC18XX)	+= pinctrl-lpc18xx.o
 obj-$(CONFIG_PINCTRL_TB10X)	+= pinctrl-tb10x.o
 obj-$(CONFIG_PINCTRL_ST) 	+= pinctrl-st.o
 obj-$(CONFIG_PINCTRL_ZYNQ)	+= pinctrl-zynq.o
+obj-$(CONFIG_PINCTRL_INGENIC)	+= pinctrl-ingenic.o
 
 obj-$(CONFIG_ARCH_ASPEED)	+= aspeed/
 obj-y				+= bcm/

drivers/pwm/pwm-jz4740.c

@@ -21,22 +21,10 @@
 #include <linux/platform_device.h>
 #include <linux/pwm.h>
 
-#include <asm/mach-jz4740/gpio.h>
 #include <asm/mach-jz4740/timer.h>
 
 #define NUM_PWM 8
 
-static const unsigned int jz4740_pwm_gpio_list[NUM_PWM] = {
-	JZ_GPIO_PWM0,
-	JZ_GPIO_PWM1,
-	JZ_GPIO_PWM2,
-	JZ_GPIO_PWM3,
-	JZ_GPIO_PWM4,
-	JZ_GPIO_PWM5,
-	JZ_GPIO_PWM6,
-	JZ_GPIO_PWM7,
-};
-
 struct jz4740_pwm_chip {
 	struct pwm_chip chip;
 	struct clk *clk;
@@ -49,9 +37,6 @@ static inline struct jz4740_pwm_chip *to_jz4740(struct pwm_chip *chip)
 
 static int jz4740_pwm_request(struct pwm_chip *chip, struct pwm_device *pwm)
 {
-	unsigned int gpio = jz4740_pwm_gpio_list[pwm->hwpwm];
-	int ret;
-
 	/*
 	 * Timers 0 and 1 are used for system tasks, so they are unavailable
 	 * for use as PWMs.
@@ -59,15 +44,6 @@ static int jz4740_pwm_request(struct pwm_chip *chip, struct pwm_device *pwm)
 	if (pwm->hwpwm < 2)
 		return -EBUSY;
 
-	ret = gpio_request(gpio, pwm->label);
-	if (ret) {
-		dev_err(chip->dev, "Failed to request GPIO#%u for PWM: %d\n",
-			gpio, ret);
-		return ret;
-	}
-
-	jz_gpio_set_function(gpio, JZ_GPIO_FUNC_PWM);
-
 	jz4740_timer_start(pwm->hwpwm);
 
 	return 0;
@@ -75,13 +51,8 @@ static int jz4740_pwm_request(struct pwm_chip *chip, struct pwm_device *pwm)
 
 static void jz4740_pwm_free(struct pwm_chip *chip, struct pwm_device *pwm)
 {
-	unsigned int gpio = jz4740_pwm_gpio_list[pwm->hwpwm];
-
 	jz4740_timer_set_ctrl(pwm->hwpwm, 0);
 
-	jz_gpio_set_function(gpio, JZ_GPIO_FUNC_NONE);
-	gpio_free(gpio);
-
 	jz4740_timer_stop(pwm->hwpwm);
 }
 

drivers/video/fbdev/jz4740_fb.c

@@ -17,6 +17,7 @@
 #include <linux/module.h>
 #include <linux/mutex.h>
 #include <linux/platform_device.h>
+#include <linux/pinctrl/consumer.h>
 
 #include <linux/clk.h>
 #include <linux/delay.h>
@@ -27,7 +28,6 @@
 #include <linux/dma-mapping.h>
 
 #include <asm/mach-jz4740/jz4740_fb.h>
-#include <asm/mach-jz4740/gpio.h>
 
 #define JZ_REG_LCD_CFG		0x00
 #define JZ_REG_LCD_VSYNC	0x04
@@ -146,93 +146,6 @@ static const struct fb_fix_screeninfo jzfb_fix = {
 	.accel		= FB_ACCEL_NONE,
 };
 
-static const struct jz_gpio_bulk_request jz_lcd_ctrl_pins[] = {
-	JZ_GPIO_BULK_PIN(LCD_PCLK),
-	JZ_GPIO_BULK_PIN(LCD_HSYNC),
-	JZ_GPIO_BULK_PIN(LCD_VSYNC),
-	JZ_GPIO_BULK_PIN(LCD_DE),
-	JZ_GPIO_BULK_PIN(LCD_PS),
-	JZ_GPIO_BULK_PIN(LCD_REV),
-	JZ_GPIO_BULK_PIN(LCD_CLS),
-	JZ_GPIO_BULK_PIN(LCD_SPL),
-};
-
-static const struct jz_gpio_bulk_request jz_lcd_data_pins[] = {
-	JZ_GPIO_BULK_PIN(LCD_DATA0),
-	JZ_GPIO_BULK_PIN(LCD_DATA1),
-	JZ_GPIO_BULK_PIN(LCD_DATA2),
-	JZ_GPIO_BULK_PIN(LCD_DATA3),
-	JZ_GPIO_BULK_PIN(LCD_DATA4),
-	JZ_GPIO_BULK_PIN(LCD_DATA5),
-	JZ_GPIO_BULK_PIN(LCD_DATA6),
-	JZ_GPIO_BULK_PIN(LCD_DATA7),
-	JZ_GPIO_BULK_PIN(LCD_DATA8),
-	JZ_GPIO_BULK_PIN(LCD_DATA9),
-	JZ_GPIO_BULK_PIN(LCD_DATA10),
-	JZ_GPIO_BULK_PIN(LCD_DATA11),
-	JZ_GPIO_BULK_PIN(LCD_DATA12),
-	JZ_GPIO_BULK_PIN(LCD_DATA13),
-	JZ_GPIO_BULK_PIN(LCD_DATA14),
-	JZ_GPIO_BULK_PIN(LCD_DATA15),
-	JZ_GPIO_BULK_PIN(LCD_DATA16),
-	JZ_GPIO_BULK_PIN(LCD_DATA17),
-};
-
-static unsigned int jzfb_num_ctrl_pins(struct jzfb *jzfb)
-{
-	unsigned int num;
-
-	switch (jzfb->pdata->lcd_type) {
-	case JZ_LCD_TYPE_GENERIC_16_BIT:
-		num = 4;
-		break;
-	case JZ_LCD_TYPE_GENERIC_18_BIT:
-		num = 4;
-		break;
-	case JZ_LCD_TYPE_8BIT_SERIAL:
-		num = 3;
-		break;
-	case JZ_LCD_TYPE_SPECIAL_TFT_1:
-	case JZ_LCD_TYPE_SPECIAL_TFT_2:
-	case JZ_LCD_TYPE_SPECIAL_TFT_3:
-		num = 8;
-		break;
-	default:
-		num = 0;
-		break;
-	}
-	return num;
-}
-
-static unsigned int jzfb_num_data_pins(struct jzfb *jzfb)
-{
-	unsigned int num;
-
-	switch (jzfb->pdata->lcd_type) {
-	case JZ_LCD_TYPE_GENERIC_16_BIT:
-		num = 16;
-		break;
-	case JZ_LCD_TYPE_GENERIC_18_BIT:
-		num = 18;
-		break;
-	case JZ_LCD_TYPE_8BIT_SERIAL:
-		num = 8;
-		break;
-	case JZ_LCD_TYPE_SPECIAL_TFT_1:
-	case JZ_LCD_TYPE_SPECIAL_TFT_2:
-	case JZ_LCD_TYPE_SPECIAL_TFT_3:
-		if (jzfb->pdata->bpp == 18)
-			num = 18;
-		else
-			num = 16;
-		break;
-	default:
-		num = 0;
-		break;
-	}
-	return num;
-}
-
 /* Based on CNVT_TOHW macro from skeletonfb.c */
 static inline uint32_t jzfb_convert_color_to_hw(unsigned val,
 	struct fb_bitfield *bf)
@@ -487,8 +400,7 @@ static void jzfb_enable(struct jzfb *jzfb)
 
 	clk_prepare_enable(jzfb->ldclk);
 
-	jz_gpio_bulk_resume(jz_lcd_ctrl_pins, jzfb_num_ctrl_pins(jzfb));
-	jz_gpio_bulk_resume(jz_lcd_data_pins, jzfb_num_data_pins(jzfb));
+	pinctrl_pm_select_default_state(&jzfb->pdev->dev);
 
 	writel(0, jzfb->base + JZ_REG_LCD_STATE);
 
@@ -511,8 +423,7 @@ static void jzfb_disable(struct jzfb *jzfb)
 		ctrl = readl(jzfb->base + JZ_REG_LCD_STATE);
 	} while (!(ctrl & JZ_LCD_STATE_DISABLED));
 
-	jz_gpio_bulk_suspend(jz_lcd_ctrl_pins, jzfb_num_ctrl_pins(jzfb));
-	jz_gpio_bulk_suspend(jz_lcd_data_pins, jzfb_num_data_pins(jzfb));
+	pinctrl_pm_select_sleep_state(&jzfb->pdev->dev);
 
 	clk_disable_unprepare(jzfb->ldclk);
 }
@@ -701,9 +612,6 @@ static int jzfb_probe(struct platform_device *pdev)
 	fb->mode = NULL;
 	jzfb_set_par(fb);
 
-	jz_gpio_bulk_request(jz_lcd_ctrl_pins, jzfb_num_ctrl_pins(jzfb));
-	jz_gpio_bulk_request(jz_lcd_data_pins, jzfb_num_data_pins(jzfb));
-
 	ret = register_framebuffer(fb);
 	if (ret) {
 		dev_err(&pdev->dev, "Failed to register framebuffer: %d\n", ret);
@@ -715,9 +623,6 @@ static int jzfb_probe(struct platform_device *pdev)
 	return 0;
 
 err_free_devmem:
-	jz_gpio_bulk_free(jz_lcd_ctrl_pins, jzfb_num_ctrl_pins(jzfb));
-	jz_gpio_bulk_free(jz_lcd_data_pins, jzfb_num_data_pins(jzfb));
-
 	fb_dealloc_cmap(&fb->cmap);
 	jzfb_free_devmem(jzfb);
 err_framebuffer_release:
@@ -731,9 +636,6 @@ static int jzfb_remove(struct platform_device *pdev)
 
 	jzfb_blank(FB_BLANK_POWERDOWN, jzfb->fb);
 
-	jz_gpio_bulk_free(jz_lcd_ctrl_pins, jzfb_num_ctrl_pins(jzfb));
-	jz_gpio_bulk_free(jz_lcd_data_pins, jzfb_num_data_pins(jzfb));
-
 	fb_dealloc_cmap(&jzfb->fb->cmap);
 	jzfb_free_devmem(jzfb);