blackfin: bf537: add capture support

Signed-off-by: NScott Jiang <scott.jiang.linux@gmail.com>
Signed-off-by: NBob Liu <lliubbo@gmail.com>

arch/blackfin/mach-bf537/boards/stamp.c

@@ -1558,6 +1558,71 @@ static struct platform_device bfin_lq035q1_device = {
 };
 #endif
 
+#if defined(CONFIG_VIDEO_BLACKFIN_CAPTURE) \
+	|| defined(CONFIG_VIDEO_BLACKFIN_CAPTURE_MODULE)
+#include <linux/videodev2.h>
+#include <media/blackfin/bfin_capture.h>
+#include <media/blackfin/ppi.h>
+
+static const unsigned short ppi_req[] = {
+	P_PPI0_D0, P_PPI0_D1, P_PPI0_D2, P_PPI0_D3,
+	P_PPI0_D4, P_PPI0_D5, P_PPI0_D6, P_PPI0_D7,
+	P_PPI0_CLK, P_PPI0_FS1, P_PPI0_FS2,
+	0,
+};
+
+static const struct ppi_info ppi_info = {
+	.type = PPI_TYPE_PPI,
+	.dma_ch = CH_PPI,
+	.irq_err = IRQ_PPI_ERROR,
+	.base = (void __iomem *)PPI_CONTROL,
+	.pin_req = ppi_req,
+};
+
+#if defined(CONFIG_VIDEO_VS6624) \
+	|| defined(CONFIG_VIDEO_VS6624_MODULE)
+static struct v4l2_input vs6624_inputs[] = {
+	{
+		.index = 0,
+		.name = "Camera",
+		.type = V4L2_INPUT_TYPE_CAMERA,
+		.std = V4L2_STD_UNKNOWN,
+	},
+};
+
+static struct bcap_route vs6624_routes[] = {
+	{
+		.input = 0,
+		.output = 0,
+	},
+};
+
+static const unsigned vs6624_ce_pin = GPIO_PF10;
+
+static struct bfin_capture_config bfin_capture_data = {
+	.card_name = "BF537",
+	.inputs = vs6624_inputs,
+	.num_inputs = ARRAY_SIZE(vs6624_inputs),
+	.routes = vs6624_routes,
+	.i2c_adapter_id = 0,
+	.board_info = {
+		.type = "vs6624",
+		.addr = 0x10,
+		.platform_data = (void *)&vs6624_ce_pin,
+	},
+	.ppi_info = &ppi_info,
+	.ppi_control = (PACK_EN | DLEN_8 | XFR_TYPE | 0x0020),
+};
+#endif
+
+static struct platform_device bfin_capture_device = {
+	.name = "bfin_capture",
+	.dev = {
+		.platform_data = &bfin_capture_data,
+	},
+};
+#endif
+
 #if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
 #ifdef CONFIG_SERIAL_BFIN_UART0
 static struct resource bfin_uart0_resources[] = {
@@ -2733,6 +2798,11 @@ static struct platform_device *stamp_devices[] __initdata = {
 	&bfin_lq035q1_device,
 #endif
 
+#if defined(CONFIG_VIDEO_BLACKFIN_CAPTURE) \
+	|| defined(CONFIG_VIDEO_BLACKFIN_CAPTURE_MODULE)
+	&bfin_capture_device,
+#endif
+
 #if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
 #ifdef CONFIG_SERIAL_BFIN_UART0
 	&bfin_uart0_device,