提交 bd597f47 编写于 作者: S Steve Twiss 提交者: Lee Jones

devicetree: Dialog Semiconductor consolidate existing vendor prefixes to standardise on 'dlg'

This patch series updates the device tree vendor prefix for
Dialog Semiconductor.

Various methods are currently used throughout the kernel: 'diasemi',
'dialog' and 'dlg'. Others have also been suggested.

This patch set aims to consolidate the usage of the vendor prefix to
use a common standard. The prefix 'dlg' is used.
Signed-off-by: NSteve Twiss <stwiss.opensource@diasemi.com>
Acked-by: NSimon Horman <horms+renesas@verge.net.au>
Acked-by: NRob Herring <robh@kernel.org>
Acked-by: NLee Jones <lee.jones@linaro.org>
Acked-by: NShawn Guo <shawn.guo@freescale.com>
Signed-off-by: NLee Jones <lee.jones@linaro.org>
上级 52addcf9
...@@ -44,7 +44,7 @@ dallas,ds1775 Tiny Digital Thermometer and Thermostat ...@@ -44,7 +44,7 @@ dallas,ds1775 Tiny Digital Thermometer and Thermostat
dallas,ds3232 Extremely Accurate I²C RTC with Integrated Crystal and SRAM dallas,ds3232 Extremely Accurate I²C RTC with Integrated Crystal and SRAM
dallas,ds4510 CPU Supervisor with Nonvolatile Memory and Programmable I/O dallas,ds4510 CPU Supervisor with Nonvolatile Memory and Programmable I/O
dallas,ds75 Digital Thermometer and Thermostat dallas,ds75 Digital Thermometer and Thermostat
dialog,da9053 DA9053: flexible system level PMIC with multicore support dlg,da9053 DA9053: flexible system level PMIC with multicore support
epson,rx8025 High-Stability. I2C-Bus INTERFACE REAL TIME CLOCK MODULE epson,rx8025 High-Stability. I2C-Bus INTERFACE REAL TIME CLOCK MODULE
epson,rx8581 I2C-BUS INTERFACE REAL TIME CLOCK MODULE epson,rx8581 I2C-BUS INTERFACE REAL TIME CLOCK MODULE
fsl,mag3110 MAG3110: Xtrinsic High Accuracy, 3D Magnetometer fsl,mag3110 MAG3110: Xtrinsic High Accuracy, 3D Magnetometer
......
...@@ -2,7 +2,7 @@ ...@@ -2,7 +2,7 @@
Required properties: Required properties:
- compatible: must be "diasemi,da9210" - compatible: must be "dlg,da9210"
- reg: the i2c slave address of the regulator. It should be 0x68. - reg: the i2c slave address of the regulator. It should be 0x68.
Any standard regulator properties can be used to configure the single da9210 Any standard regulator properties can be used to configure the single da9210
...@@ -11,7 +11,7 @@ DCDC. ...@@ -11,7 +11,7 @@ DCDC.
Example: Example:
da9210@68 { da9210@68 {
compatible = "diasemi,da9210"; compatible = "dlg,da9210";
reg = <0x68>; reg = <0x68>;
regulator-min-microvolt = <900000>; regulator-min-microvolt = <900000>;
......
...@@ -38,6 +38,7 @@ dallas Maxim Integrated Products (formerly Dallas Semiconductor) ...@@ -38,6 +38,7 @@ dallas Maxim Integrated Products (formerly Dallas Semiconductor)
davicom DAVICOM Semiconductor, Inc. davicom DAVICOM Semiconductor, Inc.
denx Denx Software Engineering denx Denx Software Engineering
digi Digi International Inc. digi Digi International Inc.
dlg Dialog Semiconductor
dlink D-Link Corporation dlink D-Link Corporation
dmo Data Modul AG dmo Data Modul AG
ebv EBV Elektronik ebv EBV Elektronik
......
...@@ -265,7 +265,7 @@ ...@@ -265,7 +265,7 @@
}; };
pmic: dialog@48 { pmic: dialog@48 {
compatible = "dialog,da9053", "dialog,da9052"; compatible = "dlg,da9053", "dlg,da9052";
reg = <0x48>; reg = <0x48>;
}; };
}; };
......
...@@ -83,7 +83,7 @@ ...@@ -83,7 +83,7 @@
}; };
pmic@58 { pmic@58 {
compatible = "dialog,da9063"; compatible = "dlg,da9063";
reg = <0x58>; reg = <0x58>;
interrupt-parent = <&gpio4>; interrupt-parent = <&gpio4>;
interrupts = <17 0x8>; /* active-low GPIO4_17 */ interrupts = <17 0x8>; /* active-low GPIO4_17 */
......
...@@ -374,7 +374,7 @@ ...@@ -374,7 +374,7 @@
status = "okay"; status = "okay";
vdd_dvfs: regulator@68 { vdd_dvfs: regulator@68 {
compatible = "diasemi,da9210"; compatible = "dlg,da9210";
reg = <0x68>; reg = <0x68>;
regulator-min-microvolt = <1000000>; regulator-min-microvolt = <1000000>;
......
...@@ -419,7 +419,7 @@ ...@@ -419,7 +419,7 @@
clock-frequency = <100000>; clock-frequency = <100000>;
vdd_dvfs: regulator@68 { vdd_dvfs: regulator@68 {
compatible = "diasemi,da9210"; compatible = "dlg,da9210";
reg = <0x68>; reg = <0x68>;
regulator-min-microvolt = <1000000>; regulator-min-microvolt = <1000000>;
......
...@@ -296,73 +296,73 @@ static struct resource da9055_ld05_6_resource = { ...@@ -296,73 +296,73 @@ static struct resource da9055_ld05_6_resource = {
static const struct mfd_cell da9055_devs[] = { static const struct mfd_cell da9055_devs[] = {
{ {
.of_compatible = "dialog,da9055-gpio", .of_compatible = "dlg,da9055-gpio",
.name = "da9055-gpio", .name = "da9055-gpio",
}, },
{ {
.of_compatible = "dialog,da9055-regulator", .of_compatible = "dlg,da9055-regulator",
.name = "da9055-regulator", .name = "da9055-regulator",
.id = 1, .id = 1,
}, },
{ {
.of_compatible = "dialog,da9055-regulator", .of_compatible = "dlg,da9055-regulator",
.name = "da9055-regulator", .name = "da9055-regulator",
.id = 2, .id = 2,
}, },
{ {
.of_compatible = "dialog,da9055-regulator", .of_compatible = "dlg,da9055-regulator",
.name = "da9055-regulator", .name = "da9055-regulator",
.id = 3, .id = 3,
}, },
{ {
.of_compatible = "dialog,da9055-regulator", .of_compatible = "dlg,da9055-regulator",
.name = "da9055-regulator", .name = "da9055-regulator",
.id = 4, .id = 4,
}, },
{ {
.of_compatible = "dialog,da9055-regulator", .of_compatible = "dlg,da9055-regulator",
.name = "da9055-regulator", .name = "da9055-regulator",
.id = 5, .id = 5,
}, },
{ {
.of_compatible = "dialog,da9055-regulator", .of_compatible = "dlg,da9055-regulator",
.name = "da9055-regulator", .name = "da9055-regulator",
.id = 6, .id = 6,
}, },
{ {
.of_compatible = "dialog,da9055-regulator", .of_compatible = "dlg,da9055-regulator",
.name = "da9055-regulator", .name = "da9055-regulator",
.id = 7, .id = 7,
.resources = &da9055_ld05_6_resource, .resources = &da9055_ld05_6_resource,
.num_resources = 1, .num_resources = 1,
}, },
{ {
.of_compatible = "dialog,da9055-regulator", .of_compatible = "dlg,da9055-regulator",
.name = "da9055-regulator", .name = "da9055-regulator",
.resources = &da9055_ld05_6_resource, .resources = &da9055_ld05_6_resource,
.num_resources = 1, .num_resources = 1,
.id = 8, .id = 8,
}, },
{ {
.of_compatible = "dialog,da9055-onkey", .of_compatible = "dlg,da9055-onkey",
.name = "da9055-onkey", .name = "da9055-onkey",
.resources = &da9055_onkey_resource, .resources = &da9055_onkey_resource,
.num_resources = 1, .num_resources = 1,
}, },
{ {
.of_compatible = "dialog,da9055-rtc", .of_compatible = "dlg,da9055-rtc",
.name = "da9055-rtc", .name = "da9055-rtc",
.resources = da9055_rtc_resource, .resources = da9055_rtc_resource,
.num_resources = ARRAY_SIZE(da9055_rtc_resource), .num_resources = ARRAY_SIZE(da9055_rtc_resource),
}, },
{ {
.of_compatible = "dialog,da9055-hwmon", .of_compatible = "dlg,da9055-hwmon",
.name = "da9055-hwmon", .name = "da9055-hwmon",
.resources = &da9055_hwmon_resource, .resources = &da9055_hwmon_resource,
.num_resources = 1, .num_resources = 1,
}, },
{ {
.of_compatible = "dialog,da9055-watchdog", .of_compatible = "dlg,da9055-watchdog",
.name = "da9055-watchdog", .name = "da9055-watchdog",
}, },
}; };
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册