提交 bc8273fe 编写于 作者: A Alex Deucher

drm/radeon: add support mc ucode loading on CIK (v2)

Load the GDDR5 ucode and train the links.

v2: update ucode
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
上级 02c81327
......@@ -65,6 +65,122 @@ extern void evergreen_mc_stop(struct radeon_device *rdev, struct evergreen_mc_sa
extern void evergreen_mc_resume(struct radeon_device *rdev, struct evergreen_mc_save *save);
extern void si_vram_gtt_location(struct radeon_device *rdev, struct radeon_mc *mc);
#define BONAIRE_IO_MC_REGS_SIZE 36
static const u32 bonaire_io_mc_regs[BONAIRE_IO_MC_REGS_SIZE][2] =
{
{0x00000070, 0x04400000},
{0x00000071, 0x80c01803},
{0x00000072, 0x00004004},
{0x00000073, 0x00000100},
{0x00000074, 0x00ff0000},
{0x00000075, 0x34000000},
{0x00000076, 0x08000014},
{0x00000077, 0x00cc08ec},
{0x00000078, 0x00000400},
{0x00000079, 0x00000000},
{0x0000007a, 0x04090000},
{0x0000007c, 0x00000000},
{0x0000007e, 0x4408a8e8},
{0x0000007f, 0x00000304},
{0x00000080, 0x00000000},
{0x00000082, 0x00000001},
{0x00000083, 0x00000002},
{0x00000084, 0xf3e4f400},
{0x00000085, 0x052024e3},
{0x00000087, 0x00000000},
{0x00000088, 0x01000000},
{0x0000008a, 0x1c0a0000},
{0x0000008b, 0xff010000},
{0x0000008d, 0xffffefff},
{0x0000008e, 0xfff3efff},
{0x0000008f, 0xfff3efbf},
{0x00000092, 0xf7ffffff},
{0x00000093, 0xffffff7f},
{0x00000095, 0x00101101},
{0x00000096, 0x00000fff},
{0x00000097, 0x00116fff},
{0x00000098, 0x60010000},
{0x00000099, 0x10010000},
{0x0000009a, 0x00006000},
{0x0000009b, 0x00001000},
{0x0000009f, 0x00b48000}
};
/* ucode loading */
/**
* ci_mc_load_microcode - load MC ucode into the hw
*
* @rdev: radeon_device pointer
*
* Load the GDDR MC ucode into the hw (CIK).
* Returns 0 on success, error on failure.
*/
static int ci_mc_load_microcode(struct radeon_device *rdev)
{
const __be32 *fw_data;
u32 running, blackout = 0;
u32 *io_mc_regs;
int i, ucode_size, regs_size;
if (!rdev->mc_fw)
return -EINVAL;
switch (rdev->family) {
case CHIP_BONAIRE:
default:
io_mc_regs = (u32 *)&bonaire_io_mc_regs;
ucode_size = CIK_MC_UCODE_SIZE;
regs_size = BONAIRE_IO_MC_REGS_SIZE;
break;
}
running = RREG32(MC_SEQ_SUP_CNTL) & RUN_MASK;
if (running == 0) {
if (running) {
blackout = RREG32(MC_SHARED_BLACKOUT_CNTL);
WREG32(MC_SHARED_BLACKOUT_CNTL, blackout | 1);
}
/* reset the engine and set to writable */
WREG32(MC_SEQ_SUP_CNTL, 0x00000008);
WREG32(MC_SEQ_SUP_CNTL, 0x00000010);
/* load mc io regs */
for (i = 0; i < regs_size; i++) {
WREG32(MC_SEQ_IO_DEBUG_INDEX, io_mc_regs[(i << 1)]);
WREG32(MC_SEQ_IO_DEBUG_DATA, io_mc_regs[(i << 1) + 1]);
}
/* load the MC ucode */
fw_data = (const __be32 *)rdev->mc_fw->data;
for (i = 0; i < ucode_size; i++)
WREG32(MC_SEQ_SUP_PGM, be32_to_cpup(fw_data++));
/* put the engine back into the active state */
WREG32(MC_SEQ_SUP_CNTL, 0x00000008);
WREG32(MC_SEQ_SUP_CNTL, 0x00000004);
WREG32(MC_SEQ_SUP_CNTL, 0x00000001);
/* wait for training to complete */
for (i = 0; i < rdev->usec_timeout; i++) {
if (RREG32(MC_SEQ_TRAIN_WAKEUP_CNTL) & TRAIN_DONE_D0)
break;
udelay(1);
}
for (i = 0; i < rdev->usec_timeout; i++) {
if (RREG32(MC_SEQ_TRAIN_WAKEUP_CNTL) & TRAIN_DONE_D1)
break;
udelay(1);
}
if (running)
WREG32(MC_SHARED_BLACKOUT_CNTL, blackout);
}
return 0;
}
/**
* cik_init_microcode - load ucode images from disk
*
......
......@@ -139,6 +139,8 @@
#define ENABLE_ADVANCED_DRIVER_MODEL (1 << 6)
#define MC_VM_FB_OFFSET 0x2068
#define MC_SHARED_BLACKOUT_CNTL 0x20ac
#define MC_ARB_RAMCFG 0x2760
#define NOOFBANK_SHIFT 0
#define NOOFBANK_MASK 0x00000003
......@@ -153,6 +155,20 @@
#define NOOFGROUPS_SHIFT 12
#define NOOFGROUPS_MASK 0x00001000
#define MC_SEQ_SUP_CNTL 0x28c8
#define RUN_MASK (1 << 0)
#define MC_SEQ_SUP_PGM 0x28cc
#define MC_SEQ_TRAIN_WAKEUP_CNTL 0x28e8
#define TRAIN_DONE_D0 (1 << 30)
#define TRAIN_DONE_D1 (1 << 31)
#define MC_IO_PAD_CNTL_D0 0x29d0
#define MEM_FALL_OUT_CMD (1 << 8)
#define MC_SEQ_IO_DEBUG_INDEX 0x2a44
#define MC_SEQ_IO_DEBUG_DATA 0x2a48
#define HDP_HOST_PATH_CNTL 0x2C00
#define HDP_NONSURFACE_BASE 0x2C04
#define HDP_NONSURFACE_INFO 0x2C08
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册