提交 bc5892c9 编写于 作者: C Chaoming Li 提交者: John W. Linville

rtlwifi: Fix firmware upload errors

When the source code from Realtek was prepared for kernel inclusion,
some routines were refactored to reduce the level of indentation. This
patch repairs errors introduced in that process.
Signed-off-by: NChaoming Li <chaoming_li@realsil.com.cn>
Signed-off-by: NLarry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
上级 acd9f9cc
......@@ -726,9 +726,9 @@ static int efuse_pg_packet_read(struct ieee80211_hw *hw, u8 offset, u8 *data)
}
static void efuse_write_data_case1(struct ieee80211_hw *hw, u16 *efuse_addr,
u8 efuse_data, u8 offset, int *bcontinual,
u8 *write_state, struct pgpkt_struct target_pkt,
int *repeat_times, int *bresult, u8 word_en)
u8 efuse_data, u8 offset, int *bcontinual,
u8 *write_state, struct pgpkt_struct *target_pkt,
int *repeat_times, int *bresult, u8 word_en)
{
struct rtl_priv *rtlpriv = rtl_priv(hw);
struct pgpkt_struct tmp_pkt;
......@@ -744,8 +744,8 @@ static void efuse_write_data_case1(struct ieee80211_hw *hw, u16 *efuse_addr,
tmp_pkt.word_en = tmp_header & 0x0F;
tmp_word_cnts = efuse_calculate_word_cnts(tmp_pkt.word_en);
if (tmp_pkt.offset != target_pkt.offset) {
efuse_addr = efuse_addr + (tmp_word_cnts * 2) + 1;
if (tmp_pkt.offset != target_pkt->offset) {
*efuse_addr = *efuse_addr + (tmp_word_cnts * 2) + 1;
*write_state = PG_STATE_HEADER;
} else {
for (tmpindex = 0; tmpindex < (tmp_word_cnts * 2); tmpindex++) {
......@@ -756,23 +756,23 @@ static void efuse_write_data_case1(struct ieee80211_hw *hw, u16 *efuse_addr,
}
if (bdataempty == false) {
efuse_addr = efuse_addr + (tmp_word_cnts * 2) + 1;
*efuse_addr = *efuse_addr + (tmp_word_cnts * 2) + 1;
*write_state = PG_STATE_HEADER;
} else {
match_word_en = 0x0F;
if (!((target_pkt.word_en & BIT(0)) |
if (!((target_pkt->word_en & BIT(0)) |
(tmp_pkt.word_en & BIT(0))))
match_word_en &= (~BIT(0));
if (!((target_pkt.word_en & BIT(1)) |
if (!((target_pkt->word_en & BIT(1)) |
(tmp_pkt.word_en & BIT(1))))
match_word_en &= (~BIT(1));
if (!((target_pkt.word_en & BIT(2)) |
if (!((target_pkt->word_en & BIT(2)) |
(tmp_pkt.word_en & BIT(2))))
match_word_en &= (~BIT(2));
if (!((target_pkt.word_en & BIT(3)) |
if (!((target_pkt->word_en & BIT(3)) |
(tmp_pkt.word_en & BIT(3))))
match_word_en &= (~BIT(3));
......@@ -780,7 +780,7 @@ static void efuse_write_data_case1(struct ieee80211_hw *hw, u16 *efuse_addr,
badworden = efuse_word_enable_data_write(
hw, *efuse_addr + 1,
tmp_pkt.word_en,
target_pkt.data);
target_pkt->data);
if (0x0F != (badworden & 0x0F)) {
u8 reorg_offset = offset;
......@@ -791,26 +791,26 @@ static void efuse_write_data_case1(struct ieee80211_hw *hw, u16 *efuse_addr,
}
tmp_word_en = 0x0F;
if ((target_pkt.word_en & BIT(0)) ^
if ((target_pkt->word_en & BIT(0)) ^
(match_word_en & BIT(0)))
tmp_word_en &= (~BIT(0));
if ((target_pkt.word_en & BIT(1)) ^
if ((target_pkt->word_en & BIT(1)) ^
(match_word_en & BIT(1)))
tmp_word_en &= (~BIT(1));
if ((target_pkt.word_en & BIT(2)) ^
if ((target_pkt->word_en & BIT(2)) ^
(match_word_en & BIT(2)))
tmp_word_en &= (~BIT(2));
if ((target_pkt.word_en & BIT(3)) ^
if ((target_pkt->word_en & BIT(3)) ^
(match_word_en & BIT(3)))
tmp_word_en &= (~BIT(3));
if ((tmp_word_en & 0x0F) != 0x0F) {
*efuse_addr = efuse_get_current_size(hw);
target_pkt.offset = offset;
target_pkt.word_en = tmp_word_en;
target_pkt->offset = offset;
target_pkt->word_en = tmp_word_en;
} else
*bcontinual = false;
*write_state = PG_STATE_HEADER;
......@@ -821,8 +821,8 @@ static void efuse_write_data_case1(struct ieee80211_hw *hw, u16 *efuse_addr,
}
} else {
*efuse_addr += (2 * tmp_word_cnts) + 1;
target_pkt.offset = offset;
target_pkt.word_en = word_en;
target_pkt->offset = offset;
target_pkt->word_en = word_en;
*write_state = PG_STATE_HEADER;
}
}
......@@ -938,7 +938,7 @@ static int efuse_pg_packet_write(struct ieee80211_hw *hw,
efuse_write_data_case1(hw, &efuse_addr,
efuse_data, offset,
&bcontinual,
&write_state, target_pkt,
&write_state, &target_pkt,
&repeat_times, &bresult,
word_en);
else
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册