Merge branches 'omap/prcm' and 'omap/mfd' of...

Merge branches 'omap/prcm' and 'omap/mfd' of git+ssh://master.kernel.org/pub/scm/linux/kernel/git/arm/linux-arm-soc into next/devel-2

Merge branches 'omap/prcm' and 'omap/mfd' of...
Merge branches 'omap/prcm' and 'omap/mfd' of git+ssh://master.kernel.org/pub/scm/linux/kernel/git/arm/linux-arm-soc into next/devel-2
bc574e19 · Arnd Bergmann · b0af8dfd · db47ccce · 345e397d · bc574e19
139 changed file
--- a/arch/arm/mach-omap1/board-ams-delta.c
+++ b/arch/arm/mach-omap1/board-ams-delta.c
@@ -138,7 +138,7 @@ void ams_delta_latch2_write(u16 mask, u16 value)
 static void __init ams_delta_init_irq(void)
 {
 	omap1_init_common_hw();
-	omap_init_irq();
+	omap1_init_irq();
 }
 static struct map_desc ams_delta_io_desc[] __initdata = {
@@ -391,7 +391,7 @@ MACHINE_START(AMS_DELTA, "Amstrad E3 (Delta)")
 	.reserve	= omap_reserve,
 	.init_irq	= ams_delta_init_irq,
 	.init_machine	= ams_delta_init,
-	.timer		= &omap_timer,
+	.timer		= &omap1_timer,
 MACHINE_END
 EXPORT_SYMBOL(ams_delta_latch1_write);

--- a/arch/arm/mach-omap1/board-fsample.c
+++ b/arch/arm/mach-omap1/board-fsample.c
@@ -329,7 +329,7 @@ static void __init omap_fsample_init(void)
 static void __init omap_fsample_init_irq(void)
 {
 	omap1_init_common_hw();
-	omap_init_irq();
+	omap1_init_irq();
 }
 /* Only FPGA needs to be mapped here. All others are done with ioremap */
@@ -394,5 +394,5 @@ MACHINE_START(OMAP_FSAMPLE, "OMAP730 F-Sample")
 	.reserve	= omap_reserve,
 	.init_irq	= omap_fsample_init_irq,
 	.init_machine	= omap_fsample_init,
-	.timer		= &omap_timer,
+	.timer		= &omap1_timer,
 MACHINE_END
--- a/arch/arm/mach-omap1/board-generic.c
+++ b/arch/arm/mach-omap1/board-generic.c
@@ -31,7 +31,7 @@
 static void __init omap_generic_init_irq(void)
 {
 	omap1_init_common_hw();
-	omap_init_irq();
+	omap1_init_irq();
 }
 /* assume no Mini-AB port */
@@ -99,5 +99,5 @@ MACHINE_START(OMAP_GENERIC, "Generic OMAP1510/1610/1710")
 	.reserve	= omap_reserve,
 	.init_irq	= omap_generic_init_irq,
 	.init_machine	= omap_generic_init,
-	.timer		= &omap_timer,
+	.timer		= &omap1_timer,
 MACHINE_END
--- a/arch/arm/mach-omap1/board-h2.c
+++ b/arch/arm/mach-omap1/board-h2.c
@@ -376,7 +376,7 @@ static struct i2c_board_info __initdata h2_i2c_board_info[] = {
 static void __init h2_init_irq(void)
 {
 	omap1_init_common_hw();
-	omap_init_irq();
+	omap1_init_irq();
 }
 static struct omap_usb_config h2_usb_config __initdata = {
@@ -466,5 +466,5 @@ MACHINE_START(OMAP_H2, "TI-H2")
 	.reserve	= omap_reserve,
 	.init_irq	= h2_init_irq,
 	.init_machine	= h2_init,
-	.timer		= &omap_timer,
+	.timer		= &omap1_timer,
 MACHINE_END
--- a/arch/arm/mach-omap1/board-h3.c
+++ b/arch/arm/mach-omap1/board-h3.c
@@ -439,7 +439,7 @@ static void __init h3_init(void)
 static void __init h3_init_irq(void)
 {
 	omap1_init_common_hw();
-	omap_init_irq();
+	omap1_init_irq();
 }
 static void __init h3_map_io(void)
@@ -454,5 +454,5 @@ MACHINE_START(OMAP_H3, "TI OMAP1710 H3 board")
 	.reserve	= omap_reserve,
 	.init_irq	= h3_init_irq,
 	.init_machine	= h3_init,
-	.timer		= &omap_timer,
+	.timer		= &omap1_timer,
 MACHINE_END
--- a/arch/arm/mach-omap1/board-htcherald.c
+++ b/arch/arm/mach-omap1/board-htcherald.c
@@ -605,7 +605,7 @@ static void __init htcherald_init_irq(void)
 {
 	printk(KERN_INFO "htcherald_init_irq.\n");
 	omap1_init_common_hw();
-	omap_init_irq();
+	omap1_init_irq();
 }
 MACHINE_START(HERALD, "HTC Herald")
@@ -616,5 +616,5 @@ MACHINE_START(HERALD, "HTC Herald")
 	.reserve	= omap_reserve,
 	.init_irq       = htcherald_init_irq,
 	.init_machine   = htcherald_init,
-	.timer          = &omap_timer,
+	.timer          = &omap1_timer,
 MACHINE_END
--- a/arch/arm/mach-omap1/board-innovator.c
+++ b/arch/arm/mach-omap1/board-innovator.c
@@ -292,7 +292,7 @@ static void __init innovator_init_smc91x(void)
 static void __init innovator_init_irq(void)
 {
 	omap1_init_common_hw();
-	omap_init_irq();
+	omap1_init_irq();
 }
 #ifdef CONFIG_ARCH_OMAP15XX
@@ -464,5 +464,5 @@ MACHINE_START(OMAP_INNOVATOR, "TI-Innovator")
 	.reserve	= omap_reserve,
 	.init_irq	= innovator_init_irq,
 	.init_machine	= innovator_init,
-	.timer		= &omap_timer,
+	.timer		= &omap1_timer,
 MACHINE_END
--- a/arch/arm/mach-omap1/board-nokia770.c
+++ b/arch/arm/mach-omap1/board-nokia770.c
@@ -51,7 +51,7 @@ static void __init omap_nokia770_init_irq(void)
 	omap_writew((omap_readw(0xfffb5004) & ~2), 0xfffb5004);
 	omap1_init_common_hw();
-	omap_init_irq();
+	omap1_init_irq();
 }
 static const unsigned int nokia770_keymap[] = {
@@ -269,5 +269,5 @@ MACHINE_START(NOKIA770, "Nokia 770")
 	.reserve	= omap_reserve,
 	.init_irq	= omap_nokia770_init_irq,
 	.init_machine	= omap_nokia770_init,
-	.timer		= &omap_timer,
+	.timer		= &omap1_timer,
 MACHINE_END
--- a/arch/arm/mach-omap1/board-osk.c
+++ b/arch/arm/mach-omap1/board-osk.c
@@ -282,7 +282,7 @@ static void __init osk_init_cf(void)
 static void __init osk_init_irq(void)
 {
 	omap1_init_common_hw();
-	omap_init_irq();
+	omap1_init_irq();
 }
 static struct omap_usb_config osk_usb_config __initdata = {
@@ -588,5 +588,5 @@ MACHINE_START(OMAP_OSK, "TI-OSK")
 	.reserve	= omap_reserve,
 	.init_irq	= osk_init_irq,
 	.init_machine	= osk_init,
-	.timer		= &omap_timer,
+	.timer		= &omap1_timer,
 MACHINE_END
--- a/arch/arm/mach-omap1/board-palmte.c
+++ b/arch/arm/mach-omap1/board-palmte.c
@@ -62,7 +62,7 @@
 static void __init omap_palmte_init_irq(void)
 {
 	omap1_init_common_hw();
-	omap_init_irq();
+	omap1_init_irq();
 }
 static const unsigned int palmte_keymap[] = {
@@ -280,5 +280,5 @@ MACHINE_START(OMAP_PALMTE, "OMAP310 based Palm Tungsten E")
 	.reserve	= omap_reserve,
 	.init_irq	= omap_palmte_init_irq,
 	.init_machine	= omap_palmte_init,
-	.timer		= &omap_timer,
+	.timer		= &omap1_timer,
 MACHINE_END
--- a/arch/arm/mach-omap1/board-palmtt.c
+++ b/arch/arm/mach-omap1/board-palmtt.c
@@ -266,7 +266,7 @@ static struct spi_board_info __initdata palmtt_boardinfo[] = {
 static void __init omap_palmtt_init_irq(void)
 {
 	omap1_init_common_hw();
-	omap_init_irq();
+	omap1_init_irq();
 }
 static struct omap_usb_config palmtt_usb_config __initdata = {
@@ -326,5 +326,5 @@ MACHINE_START(OMAP_PALMTT, "OMAP1510 based Palm Tungsten|T")
 	.reserve	= omap_reserve,
 	.init_irq	= omap_palmtt_init_irq,
 	.init_machine	= omap_palmtt_init,
-	.timer		= &omap_timer,
+	.timer		= &omap1_timer,
 MACHINE_END
--- a/arch/arm/mach-omap1/board-palmz71.c
+++ b/arch/arm/mach-omap1/board-palmz71.c
@@ -61,7 +61,7 @@ static void __init
 omap_palmz71_init_irq(void)
 {
 	omap1_init_common_hw();
-	omap_init_irq();
+	omap1_init_irq();
 }
 static const unsigned int palmz71_keymap[] = {
@@ -346,5 +346,5 @@ MACHINE_START(OMAP_PALMZ71, "OMAP310 based Palm Zire71")
 	.reserve	= omap_reserve,
 	.init_irq	= omap_palmz71_init_irq,
 	.init_machine	= omap_palmz71_init,
-	.timer		= &omap_timer,
+	.timer		= &omap1_timer,
 MACHINE_END
--- a/arch/arm/mach-omap1/board-perseus2.c
+++ b/arch/arm/mach-omap1/board-perseus2.c
@@ -297,7 +297,7 @@ static void __init omap_perseus2_init(void)
 static void __init omap_perseus2_init_irq(void)
 {
 	omap1_init_common_hw();
-	omap_init_irq();
+	omap1_init_irq();
 }
 /* Only FPGA needs to be mapped here. All others are done with ioremap */
 static struct map_desc omap_perseus2_io_desc[] __initdata = {
@@ -355,5 +355,5 @@ MACHINE_START(OMAP_PERSEUS2, "OMAP730 Perseus2")
 	.reserve	= omap_reserve,
 	.init_irq	= omap_perseus2_init_irq,
 	.init_machine	= omap_perseus2_init,
-	.timer		= &omap_timer,
+	.timer		= &omap1_timer,
 MACHINE_END
--- a/arch/arm/mach-omap1/board-sx1.c
+++ b/arch/arm/mach-omap1/board-sx1.c
@@ -411,7 +411,7 @@ static void __init omap_sx1_init(void)
 static void __init omap_sx1_init_irq(void)
 {
 	omap1_init_common_hw();
-	omap_init_irq();
+	omap1_init_irq();
 }
 /*----------------------------------------*/
@@ -426,5 +426,5 @@ MACHINE_START(SX1, "OMAP310 based Siemens SX1")
 	.reserve	= omap_reserve,
 	.init_irq	= omap_sx1_init_irq,
 	.init_machine	= omap_sx1_init,
-	.timer		= &omap_timer,
+	.timer		= &omap1_timer,
 MACHINE_END
--- a/arch/arm/mach-omap1/board-voiceblue.c
+++ b/arch/arm/mach-omap1/board-voiceblue.c
@@ -162,7 +162,7 @@ static struct omap_board_config_kernel voiceblue_config[] = {
 static void __init voiceblue_init_irq(void)
 {
 	omap1_init_common_hw();
-	omap_init_irq();
+	omap1_init_irq();
 }
 static void __init voiceblue_map_io(void)
@@ -306,5 +306,5 @@ MACHINE_START(VOICEBLUE, "VoiceBlue OMAP5910")
 	.reserve	= omap_reserve,
 	.init_irq	= voiceblue_init_irq,
 	.init_machine	= voiceblue_init,
-	.timer		= &omap_timer,
+	.timer		= &omap1_timer,
 MACHINE_END
--- a/arch/arm/mach-omap1/irq.c
+++ b/arch/arm/mach-omap1/irq.c
@@ -175,7 +175,7 @@ static struct irq_chip omap_irq_chip = {
 	.irq_set_wake	= omap_wake_irq,
 };
-void __init omap_init_irq(void)
+void __init omap1_init_irq(void)
 {
 	int i, j;

--- a/arch/arm/mach-omap1/mcbsp.c
+++ b/arch/arm/mach-omap1/mcbsp.c
@@ -38,7 +38,7 @@ static void omap1_mcbsp_request(unsigned int id)
 	 * On 1510, 1610 and 1710, McBSP1 and McBSP3
 	 * are DSP public peripherals.
 	 */
-	if (id == OMAP_MCBSP1 || id == OMAP_MCBSP3) {
+	if (id == 0 || id == 2) {
 		if (dsp_use++ == 0) {
 			api_clk = clk_get(NULL, "api_ck");
 			dsp_clk = clk_get(NULL, "dsp_ck");
@@ -59,7 +59,7 @@ static void omap1_mcbsp_request(unsigned int id)
 static void omap1_mcbsp_free(unsigned int id)
 {
-	if (id == OMAP_MCBSP1 || id == OMAP_MCBSP3) {
+	if (id == 0 || id == 2) {
 		if (--dsp_use == 0) {
 			if (!IS_ERR(api_clk)) {
 				clk_disable(api_clk);

--- a/arch/arm/mach-omap1/time.c
+++ b/arch/arm/mach-omap1/time.c
@@ -297,7 +297,7 @@ static inline int omap_32k_timer_usable(void)
 * Timer initialization
 * ---------------------------------------------------------------------------
 */
-static void __init omap_timer_init(void)
+static void __init omap1_timer_init(void)
 {
 	if (omap_32k_timer_usable()) {
 		preferred_sched_clock_init(1);
@@ -307,6 +307,6 @@ static void __init omap_timer_init(void)
 	}
 }
-struct sys_timer omap_timer = {
+struct sys_timer omap1_timer = {
-	.init		= omap_timer_init,
+	.init		= omap1_timer_init,
 };
--- a/arch/arm/mach-omap1/timer32k.c
+++ b/arch/arm/mach-omap1/timer32k.c
@@ -183,10 +183,6 @@ static __init void omap_init_32k_timer(void)
 bool __init omap_32k_timer_init(void)
 {
 	omap_init_clocksource_32k();
-#ifdef CONFIG_OMAP_DM_TIMER
-	omap_dm_timer_init();
-#endif
 	omap_init_32k_timer();
 	return true;

--- a/arch/arm/mach-omap2/Makefile
+++ b/arch/arm/mach-omap2/Makefile
@@ -3,7 +3,7 @@
 #
 # Common support
-obj-y := id.o io.o control.o mux.o devices.o serial.o gpmc.o timer-gp.o pm.o \
+obj-y := id.o io.o control.o mux.o devices.o serial.o gpmc.o timer.o pm.o \
 	 common.o gpio.o dma.o wd_timer.o
 omap-2-3-common				= irq.o sdrc.o
@@ -145,9 +145,19 @@ obj-$(CONFIG_SOC_OMAP2420)		+= opp2420_data.o
 obj-$(CONFIG_SOC_OMAP2430)		+= opp2430_data.o
 # hwmod data
-obj-$(CONFIG_SOC_OMAP2420)		+= omap_hwmod_2420_data.o
+obj-$(CONFIG_SOC_OMAP2420)		+= omap_hwmod_2xxx_ipblock_data.o \
-obj-$(CONFIG_SOC_OMAP2430)		+= omap_hwmod_2430_data.o
+					   omap_hwmod_2xxx_3xxx_ipblock_data.o \
-obj-$(CONFIG_ARCH_OMAP3)		+= omap_hwmod_3xxx_data.o
+					   omap_hwmod_2xxx_interconnect_data.o \
+					   omap_hwmod_2xxx_3xxx_interconnect_data.o \
+					   omap_hwmod_2420_data.o
+obj-$(CONFIG_SOC_OMAP2430)		+= omap_hwmod_2xxx_ipblock_data.o \
+					   omap_hwmod_2xxx_3xxx_ipblock_data.o \
+					   omap_hwmod_2xxx_interconnect_data.o \
+					   omap_hwmod_2xxx_3xxx_interconnect_data.o \
+					   omap_hwmod_2430_data.o
+obj-$(CONFIG_ARCH_OMAP3)		+= omap_hwmod_2xxx_3xxx_ipblock_data.o \
+					   omap_hwmod_2xxx_3xxx_interconnect_data.o \
+					   omap_hwmod_3xxx_data.o
 obj-$(CONFIG_ARCH_OMAP4)		+= omap_hwmod_44xx_data.o
 # EMU peripherals
@@ -269,4 +279,4 @@ obj-$(CONFIG_ARCH_OMAP4)		+= hwspinlock.o
 disp-$(CONFIG_OMAP2_DSS)		:= display.o
 obj-y					+= $(disp-m) $(disp-y)
-obj-y					+= common-board-devices.o
+obj-y					+= common-board-devices.o twl-common.o
--- a/arch/arm/mach-omap2/board-2430sdp.c
+++ b/arch/arm/mach-omap2/board-2430sdp.c
@@ -260,7 +260,7 @@ MACHINE_START(OMAP_2430SDP, "OMAP2430 sdp2430 board")
 	.reserve	= omap_reserve,
 	.map_io		= omap_2430sdp_map_io,
 	.init_early	= omap_2430sdp_init_early,
-	.init_irq	= omap_init_irq,
+	.init_irq	= omap2_init_irq,
 	.init_machine	= omap_2430sdp_init,
-	.timer		= &omap_timer,
+	.timer		= &omap2_timer,
 MACHINE_END
--- a/arch/arm/mach-omap2/board-3430sdp.c
+++ b/arch/arm/mach-omap2/board-3430sdp.c
@@ -231,22 +231,6 @@ static void __init omap_3430sdp_init_early(void)
 	omap2_init_common_devices(hyb18m512160af6_sdrc_params, NULL);
 }
-static int sdp3430_batt_table[] = {
-/* 0 C*/
-30800, 29500, 28300, 27100,
-26000, 24900, 23900, 22900, 22000, 21100, 20300, 19400, 18700, 17900,
-17200, 16500, 15900, 15300, 14700, 14100, 13600, 13100, 12600, 12100,
-11600, 11200, 10800, 10400, 10000, 9630,   9280,   8950,   8620,   8310,
-8020,   7730,   7460,   7200,   6950,   6710,   6470,   6250,   6040,   5830,
-5640,   5450,   5260,   5090,   4920,   4760,   4600,   4450,   4310,   4170,
-4040,   3910,   3790,   3670,   3550
-};
-static struct twl4030_bci_platform_data sdp3430_bci_data = {
-	.battery_tmp_tbl	= sdp3430_batt_table,
-	.tblsize		= ARRAY_SIZE(sdp3430_batt_table),
-};
 static struct omap2_hsmmc_info mmc[] = {
 	{
 		.mmc		= 1,
@@ -292,14 +276,6 @@ static struct twl4030_gpio_platform_data sdp3430_gpio_data = {
 	.setup		= sdp3430_twl_gpio_setup,
 };
-static struct twl4030_usb_data sdp3430_usb_data = {
-	.usb_mode	= T2_USB_MODE_ULPI,
-};
-static struct twl4030_madc_platform_data sdp3430_madc_data = {
-	.irq_line	= 1,
-};
 /* regulator consumer mappings */
 /* ads7846 on SPI */
@@ -307,16 +283,6 @@ static struct regulator_consumer_supply sdp3430_vaux3_supplies[] = {
 	REGULATOR_SUPPLY("vcc", "spi1.0"),
 };
-static struct regulator_consumer_supply sdp3430_vdda_dac_supplies[] = {
-	REGULATOR_SUPPLY("vdda_dac", "omapdss_venc"),
-};
-/* VPLL2 for digital video outputs */
-static struct regulator_consumer_supply sdp3430_vpll2_supplies[] = {
-	REGULATOR_SUPPLY("vdds_dsi", "omapdss"),
-	REGULATOR_SUPPLY("vdds_dsi", "omapdss_dsi1"),
-};
 static struct regulator_consumer_supply sdp3430_vmmc1_supplies[] = {
 	REGULATOR_SUPPLY("vmmc", "omap_hsmmc.0"),
 };
@@ -433,54 +399,10 @@ static struct regulator_init_data sdp3430_vsim = {
 	.consumer_supplies	= sdp3430_vsim_supplies,
 };
-/* VDAC for DSS driving S-Video */
-static struct regulator_init_data sdp3430_vdac = {
-	.constraints = {
-		.min_uV			= 1800000,
-		.max_uV			= 1800000,
-		.apply_uV		= true,
-		.valid_modes_mask	= REGULATOR_MODE_NORMAL
-					| REGULATOR_MODE_STANDBY,
-		.valid_ops_mask		= REGULATOR_CHANGE_MODE
-					| REGULATOR_CHANGE_STATUS,
-	},
-	.num_consumer_supplies	= ARRAY_SIZE(sdp3430_vdda_dac_supplies),
-	.consumer_supplies	= sdp3430_vdda_dac_supplies,
-};
-static struct regulator_init_data sdp3430_vpll2 = {
-	.constraints = {
-		.name			= "VDVI",
-		.min_uV			= 1800000,
-		.max_uV			= 1800000,
-		.apply_uV		= true,
-		.valid_modes_mask	= REGULATOR_MODE_NORMAL
-					| REGULATOR_MODE_STANDBY,
-		.valid_ops_mask		= REGULATOR_CHANGE_MODE
-					| REGULATOR_CHANGE_STATUS,
-	},
-	.num_consumer_supplies	= ARRAY_SIZE(sdp3430_vpll2_supplies),
-	.consumer_supplies	= sdp3430_vpll2_supplies,
-};
-static struct twl4030_codec_audio_data sdp3430_audio;
-static struct twl4030_codec_data sdp3430_codec = {
-	.audio_mclk = 26000000,
-	.audio = &sdp3430_audio,
-};
 static struct twl4030_platform_data sdp3430_twldata = {
-	.irq_base	= TWL4030_IRQ_BASE,
-	.irq_end	= TWL4030_IRQ_END,
 	/* platform_data for children goes here */
-	.bci		= &sdp3430_bci_data,
 	.gpio		= &sdp3430_gpio_data,
-	.madc		= &sdp3430_madc_data,
 	.keypad		= &sdp3430_kp_data,
-	.usb		= &sdp3430_usb_data,
-	.codec		= &sdp3430_codec,
 	.vaux1		= &sdp3430_vaux1,
 	.vaux2		= &sdp3430_vaux2,
@@ -489,14 +411,21 @@ static struct twl4030_platform_data sdp3430_twldata = {
 	.vmmc1		= &sdp3430_vmmc1,
 	.vmmc2		= &sdp3430_vmmc2,
 	.vsim		= &sdp3430_vsim,
-	.vdac		= &sdp3430_vdac,
-	.vpll2		= &sdp3430_vpll2,
 };
 static int __init omap3430_i2c_init(void)
 {
 	/* i2c1 for PMIC only */
+	omap3_pmic_get_config(&sdp3430_twldata,
+			TWL_COMMON_PDATA_USB | TWL_COMMON_PDATA_BCI |
+			TWL_COMMON_PDATA_MADC | TWL_COMMON_PDATA_AUDIO,
+			TWL_COMMON_REGULATOR_VDAC | TWL_COMMON_REGULATOR_VPLL2);
+	sdp3430_twldata.vdac->constraints.apply_uV = true;
+	sdp3430_twldata.vpll2->constraints.apply_uV = true;
+	sdp3430_twldata.vpll2->constraints.name = "VDVI";
 	omap3_pmic_init("twl4030", &sdp3430_twldata);
 	/* i2c2 on camera connector (for sensor control) and optional isp1301 */
 	omap_register_i2c_bus(2, 400, NULL, 0);
 	/* i2c3 on display connector (for DVI, tfp410) */
@@ -804,7 +733,7 @@ MACHINE_START(OMAP_3430SDP, "OMAP3430 3430SDP board")
 	.reserve	= omap_reserve,
 	.map_io		= omap3_map_io,
 	.init_early	= omap_3430sdp_init_early,
-	.init_irq	= omap_init_irq,
+	.init_irq	= omap3_init_irq,
 	.init_machine	= omap_3430sdp_init,
-	.timer		= &omap_timer,
+	.timer		= &omap3_timer,
 MACHINE_END
--- a/arch/arm/mach-omap2/board-3630sdp.c
+++ b/arch/arm/mach-omap2/board-3630sdp.c
@@ -219,7 +219,7 @@ MACHINE_START(OMAP_3630SDP, "OMAP 3630SDP board")
 	.reserve	= omap_reserve,
 	.map_io		= omap3_map_io,
 	.init_early	= omap_sdp_init_early,
-	.init_irq	= omap_init_irq,
+	.init_irq	= omap3_init_irq,
 	.init_machine	= omap_sdp_init,
-	.timer		= &omap_timer,
+	.timer		= &omap3_timer,
 MACHINE_END
--- a/arch/arm/mach-omap2/board-4430sdp.c
+++ b/arch/arm/mach-omap2/board-4430sdp.c
@@ -22,6 +22,7 @@
 #include <linux/i2c/twl.h>
 #include <linux/gpio_keys.h>
 #include <linux/regulator/machine.h>
+#include <linux/regulator/fixed.h>
 #include <linux/leds.h>
 #include <linux/leds_pwm.h>
@@ -40,7 +41,6 @@
 #include "mux.h"
 #include "hsmmc.h"
-#include "timer-gp.h"
 #include "control.h"
 #include "common-board-devices.h"
@@ -276,11 +276,40 @@ static struct platform_device sdp4430_lcd_device = {
 	.id		= -1,
 };
+static struct regulator_consumer_supply sdp4430_vbat_supply[] = {
+	REGULATOR_SUPPLY("vddvibl", "twl6040-vibra"),
+	REGULATOR_SUPPLY("vddvibr", "twl6040-vibra"),
+};
+static struct regulator_init_data sdp4430_vbat_data = {
+	.constraints = {
+		.always_on	= 1,
+	},
+	.num_consumer_supplies	= ARRAY_SIZE(sdp4430_vbat_supply),
+	.consumer_supplies	= sdp4430_vbat_supply,
+};
+static struct fixed_voltage_config sdp4430_vbat_pdata = {
+	.supply_name	= "VBAT",
+	.microvolts	= 3750000,
+	.init_data	= &sdp4430_vbat_data,
+	.gpio		= -EINVAL,
+};
+static struct platform_device sdp4430_vbat = {
+	.name		= "reg-fixed-voltage",
+	.id		= -1,
+	.dev = {
+		.platform_data = &sdp4430_vbat_pdata,
+	},
+};
 static struct platform_device *sdp4430_devices[] __initdata = {
 	&sdp4430_lcd_device,
 	&sdp4430_gpio_keys_device,
 	&sdp4430_leds_gpio,
 	&sdp4430_leds_pwm,
+	&sdp4430_vbat,
 };
 static struct omap_lcd_config sdp4430_lcd_config __initdata = {
@@ -295,9 +324,6 @@ static void __init omap_4430sdp_init_early(void)
 {
 	omap2_init_common_infrastructure();
 	omap2_init_common_devices(NULL, NULL);
-#ifdef CONFIG_OMAP_32K_TIMER
-	omap2_gp_clockevent_set_gptimer(1);
-#endif
 }
 static struct omap_musb_board_data musb_board_data = {
@@ -306,14 +332,6 @@ static struct omap_musb_board_data musb_board_data = {
 	.power			= 100,
 };
-static struct twl4030_usb_data omap4_usbphy_data = {
-	.phy_init	= omap4430_phy_init,
-	.phy_exit	= omap4430_phy_exit,
-	.phy_power	= omap4430_phy_power,
-	.phy_set_clock	= omap4430_phy_set_clk,
-	.phy_suspend	= omap4430_phy_suspend,
-};
 static struct omap2_hsmmc_info mmc[] = {
 	{
 		.mmc		= 2,
@@ -333,16 +351,7 @@ static struct omap2_hsmmc_info mmc[] = {
 };
 static struct regulator_consumer_supply sdp4430_vaux_supply[] = {
-	{
+	REGULATOR_SUPPLY("vmmc", "omap_hsmmc.1"),
-		.supply = "vmmc",
-		.dev_name = "omap_hsmmc.1",
-	},
-};
-static struct regulator_consumer_supply sdp4430_vmmc_supply[] = {
-	{
-		.supply = "vmmc",
-		.dev_name = "omap_hsmmc.0",
-	},
 };
 static int omap4_twl6030_hsmmc_late_init(struct device *dev)
@@ -399,65 +408,10 @@ static struct regulator_init_data sdp4430_vaux1 = {
 					| REGULATOR_CHANGE_MODE
 					| REGULATOR_CHANGE_STATUS,
 	},
-	.num_consumer_supplies  = 1,
+	.num_consumer_supplies  = ARRAY_SIZE(sdp4430_vaux_supply),
 	.consumer_supplies      = sdp4430_vaux_supply,
 };
-static struct regulator_init_data sdp4430_vaux2 = {
-	.constraints = {
-		.min_uV			= 1200000,
-		.max_uV			= 2800000,
-		.apply_uV		= true,
-		.valid_modes_mask	= REGULATOR_MODE_NORMAL
-					| REGULATOR_MODE_STANDBY,
-		.valid_ops_mask	 = REGULATOR_CHANGE_VOLTAGE
-					| REGULATOR_CHANGE_MODE
-					| REGULATOR_CHANGE_STATUS,
-	},
-};
-static struct regulator_init_data sdp4430_vaux3 = {
-	.constraints = {
-		.min_uV			= 1000000,
-		.max_uV			= 3000000,
-		.apply_uV		= true,
-		.valid_modes_mask	= REGULATOR_MODE_NORMAL
-					| REGULATOR_MODE_STANDBY,
-		.valid_ops_mask	 = REGULATOR_CHANGE_VOLTAGE
-					| REGULATOR_CHANGE_MODE
-					| REGULATOR_CHANGE_STATUS,
-	},
-};
-/* VMMC1 for MMC1 card */
-static struct regulator_init_data sdp4430_vmmc = {
-	.constraints = {
-		.min_uV			= 1200000,
-		.max_uV			= 3000000,
-		.apply_uV		= true,
-		.valid_modes_mask	= REGULATOR_MODE_NORMAL
-					| REGULATOR_MODE_STANDBY,
-		.valid_ops_mask	 = REGULATOR_CHANGE_VOLTAGE
-					| REGULATOR_CHANGE_MODE
-					| REGULATOR_CHANGE_STATUS,
-	},
-	.num_consumer_supplies  = 1,
-	.consumer_supplies      = sdp4430_vmmc_supply,
-};
-static struct regulator_init_data sdp4430_vpp = {
-	.constraints = {
-		.min_uV			= 1800000,
-		.max_uV			= 2500000,
-		.apply_uV		= true,
-		.valid_modes_mask	= REGULATOR_MODE_NORMAL
-					| REGULATOR_MODE_STANDBY,
-		.valid_ops_mask	 = REGULATOR_CHANGE_VOLTAGE
-					| REGULATOR_CHANGE_MODE
-					| REGULATOR_CHANGE_STATUS,
-	},
-};
 static struct regulator_init_data sdp4430_vusim = {
 	.constraints = {
 		.min_uV			= 1200000,
@@ -471,74 +425,36 @@ static struct regulator_init_data sdp4430_vusim = {
 	},
 };
-static struct regulator_init_data sdp4430_vana = {
+static struct twl4030_codec_data twl6040_codec = {
-	.constraints = {
+	/* single-step ramp for headset and handsfree */
-		.min_uV			= 2100000,
+	.hs_left_step	= 0x0f,
-		.max_uV			= 2100000,
+	.hs_right_step	= 0x0f,
-		.valid_modes_mask	= REGULATOR_MODE_NORMAL
+	.hf_left_step	= 0x1d,
-					| REGULATOR_MODE_STANDBY,
+	.hf_right_step	= 0x1d,
-		.valid_ops_mask	 = REGULATOR_CHANGE_MODE
-					| REGULATOR_CHANGE_STATUS,
-	},
-};
-static struct regulator_init_data sdp4430_vcxio = {
-	.constraints = {
-		.min_uV			= 1800000,
-		.max_uV			= 1800000,
-		.valid_modes_mask	= REGULATOR_MODE_NORMAL
-					| REGULATOR_MODE_STANDBY,
-		.valid_ops_mask	 = REGULATOR_CHANGE_MODE
-					| REGULATOR_CHANGE_STATUS,
-	},
 };
-static struct regulator_init_data sdp4430_vdac = {
+static struct twl4030_vibra_data twl6040_vibra = {
-	.constraints = {
+	.vibldrv_res = 8,
-		.min_uV			= 1800000,
+	.vibrdrv_res = 3,
-		.max_uV			= 1800000,
+	.viblmotor_res = 10,
-		.valid_modes_mask	= REGULATOR_MODE_NORMAL
+	.vibrmotor_res = 10,
-					| REGULATOR_MODE_STANDBY,
+	.vddvibl_uV = 0,	/* fixed volt supply - VBAT */
-		.valid_ops_mask	 = REGULATOR_CHANGE_MODE
+	.vddvibr_uV = 0,	/* fixed volt supply - VBAT */
-					| REGULATOR_CHANGE_STATUS,
-	},
 };
-static struct regulator_init_data sdp4430_vusb = {
+static struct twl4030_audio_data twl6040_audio = {
-	.constraints = {
+	.codec		= &twl6040_codec,
-		.min_uV			= 3300000,
+	.vibra		= &twl6040_vibra,
-		.max_uV			= 3300000,
+	.audpwron_gpio	= 127,
-		.apply_uV		= true,
+	.naudint_irq	= OMAP44XX_IRQ_SYS_2N,
-		.valid_modes_mask	= REGULATOR_MODE_NORMAL
+	.irq_base	= TWL6040_CODEC_IRQ_BASE,
-					| REGULATOR_MODE_STANDBY,
-		.valid_ops_mask	 =	REGULATOR_CHANGE_MODE
-					| REGULATOR_CHANGE_STATUS,
-	},
-};
-static struct regulator_init_data sdp4430_clk32kg = {
-	.constraints = {
-		.valid_ops_mask		= REGULATOR_CHANGE_STATUS,
-	},
 };
 static struct twl4030_platform_data sdp4430_twldata = {
-	.irq_base	= TWL6030_IRQ_BASE,
+	.audio		= &twl6040_audio,
-	.irq_end	= TWL6030_IRQ_END,
 	/* Regulators */
-	.vmmc		= &sdp4430_vmmc,
-	.vpp		= &sdp4430_vpp,
 	.vusim		= &sdp4430_vusim,
-	.vana		= &sdp4430_vana,
-	.vcxio		= &sdp4430_vcxio,
-	.vdac		= &sdp4430_vdac,
-	.vusb		= &sdp4430_vusb,
 	.vaux1		= &sdp4430_vaux1,
-	.vaux2		= &sdp4430_vaux2,
-	.vaux3		= &sdp4430_vaux3,
-	.clk32kg	= &sdp4430_clk32kg,
-	.usb		= &omap4_usbphy_data
 };
 static struct i2c_board_info __initdata sdp4430_i2c_3_boardinfo[] = {
@@ -556,6 +472,16 @@ static struct i2c_board_info __initdata sdp4430_i2c_4_boardinfo[] = {
 };
 static int __init omap4_i2c_init(void)
 {
+	omap4_pmic_get_config(&sdp4430_twldata, TWL_COMMON_PDATA_USB,
+			TWL_COMMON_REGULATOR_VDAC |
+			TWL_COMMON_REGULATOR_VAUX2 |
+			TWL_COMMON_REGULATOR_VAUX3 |
+			TWL_COMMON_REGULATOR_VMMC |
+			TWL_COMMON_REGULATOR_VPP |
+			TWL_COMMON_REGULATOR_VANA |
+			TWL_COMMON_REGULATOR_VCXIO |
+			TWL_COMMON_REGULATOR_VUSB |
+			TWL_COMMON_REGULATOR_CLK32KG);
 	omap4_pmic_init("twl6030", &sdp4430_twldata);
 	omap_register_i2c_bus(2, 400, NULL, 0);
 	omap_register_i2c_bus(3, 400, sdp4430_i2c_3_boardinfo,
@@ -773,5 +699,5 @@ MACHINE_START(OMAP_4430SDP, "OMAP4430 4430SDP board")
 	.init_early	= omap_4430sdp_init_early,
 	.init_irq	= gic_init_irq,
 	.init_machine	= omap_4430sdp_init,
-	.timer		= &omap_timer,
+	.timer		= &omap4_timer,
 MACHINE_END
--- a/arch/arm/mach-omap2/board-am3517crane.c
+++ b/arch/arm/mach-omap2/board-am3517crane.c
@@ -104,7 +104,7 @@ MACHINE_START(CRANEBOARD, "AM3517/05 CRANEBOARD")
 	.reserve	= omap_reserve,
 	.map_io		= omap3_map_io,
 	.init_early	= am3517_crane_init_early,
-	.init_irq	= omap_init_irq,
+	.init_irq	= omap3_init_irq,
 	.init_machine	= am3517_crane_init,
-	.timer		= &omap_timer,
+	.timer		= &omap3_timer,
 MACHINE_END
--- a/arch/arm/mach-omap2/board-am3517evm.c
+++ b/arch/arm/mach-omap2/board-am3517evm.c
@@ -494,7 +494,7 @@ MACHINE_START(OMAP3517EVM, "OMAP3517/AM3517 EVM")
 	.reserve	= omap_reserve,
 	.map_io		= omap3_map_io,
 	.init_early	= am3517_evm_init_early,
-	.init_irq	= omap_init_irq,
+	.init_irq	= omap3_init_irq,
 	.init_machine	= am3517_evm_init,
-	.timer		= &omap_timer,
+	.timer		= &omap3_timer,
 MACHINE_END
--- a/arch/arm/mach-omap2/board-apollon.c
+++ b/arch/arm/mach-omap2/board-apollon.c
@@ -354,7 +354,7 @@ MACHINE_START(OMAP_APOLLON, "OMAP24xx Apollon")
 	.reserve	= omap_reserve,
 	.map_io		= omap_apollon_map_io,
 	.init_early	= omap_apollon_init_early,
-	.init_irq	= omap_init_irq,
+	.init_irq	= omap2_init_irq,
 	.init_machine	= omap_apollon_init,
-	.timer		= &omap_timer,
+	.timer		= &omap2_timer,
 MACHINE_END
--- a/arch/arm/mach-omap2/board-cm-t35.c
+++ b/arch/arm/mach-omap2/board-cm-t35.c
@@ -162,9 +162,7 @@ static struct mtd_partition cm_t35_nand_partitions[] = {
 static struct omap_nand_platform_data cm_t35_nand_data = {
 	.parts			= cm_t35_nand_partitions,
 	.nr_parts		= ARRAY_SIZE(cm_t35_nand_partitions),
-	.dma_channel		= -1,	/* disable DMA in OMAP NAND driver */
 	.cs			= 0,
 };
 static void __init cm_t35_init_nand(void)
@@ -337,19 +335,17 @@ static void __init cm_t35_init_display(void)
 	}
 }
-static struct regulator_consumer_supply cm_t35_vmmc1_supply = {
+static struct regulator_consumer_supply cm_t35_vmmc1_supply[] = {
-	.supply			= "vmmc",
+	REGULATOR_SUPPLY("vmmc", "omap_hsmmc.0"),
 };
-static struct regulator_consumer_supply cm_t35_vsim_supply = {
+static struct regulator_consumer_supply cm_t35_vsim_supply[] = {
-	.supply			= "vmmc_aux",
+	REGULATOR_SUPPLY("vmmc_aux", "omap_hsmmc.0"),
 };
-static struct regulator_consumer_supply cm_t35_vdac_supply =
+static struct regulator_consumer_supply cm_t35_vdvi_supply[] = {
-	REGULATOR_SUPPLY("vdda_dac", "omapdss_venc");
+	REGULATOR_SUPPLY("vdvi", "omapdss"),
+};
-static struct regulator_consumer_supply cm_t35_vdvi_supply =
-	REGULATOR_SUPPLY("vdvi", "omapdss");
 /* VMMC1 for MMC1 pins CMD, CLK, DAT0..DAT3 (20 mA, plus card == max 220 mA) */
 static struct regulator_init_data cm_t35_vmmc1 = {
@@ -362,8 +358,8 @@ static struct regulator_init_data cm_t35_vmmc1 = {
 					| REGULATOR_CHANGE_MODE
 					| REGULATOR_CHANGE_STATUS,
 	},
-	.num_consumer_supplies	= 1,
+	.num_consumer_supplies	= ARRAY_SIZE(cm_t35_vmmc1_supply),
-	.consumer_supplies	= &cm_t35_vmmc1_supply,
+	.consumer_supplies	= cm_t35_vmmc1_supply,
 };
 /* VSIM for MMC1 pins DAT4..DAT7 (2 mA, plus card == max 50 mA) */
@@ -377,41 +373,8 @@ static struct regulator_init_data cm_t35_vsim = {
 					| REGULATOR_CHANGE_MODE
 					| REGULATOR_CHANGE_STATUS,
 	},
-	.num_consumer_supplies	= 1,
+	.num_consumer_supplies	= ARRAY_SIZE(cm_t35_vsim_supply),
-	.consumer_supplies	= &cm_t35_vsim_supply,
+	.consumer_supplies	= cm_t35_vsim_supply,
-};
-/* VDAC for DSS driving S-Video (8 mA unloaded, max 65 mA) */
-static struct regulator_init_data cm_t35_vdac = {
-	.constraints = {
-		.min_uV			= 1800000,
-		.max_uV			= 1800000,
-		.valid_modes_mask	= REGULATOR_MODE_NORMAL
-					| REGULATOR_MODE_STANDBY,
-		.valid_ops_mask		= REGULATOR_CHANGE_MODE
-					| REGULATOR_CHANGE_STATUS,
-	},
-	.num_consumer_supplies	= 1,
-	.consumer_supplies	= &cm_t35_vdac_supply,
-};
-/* VPLL2 for digital video outputs */
-static struct regulator_init_data cm_t35_vpll2 = {
-	.constraints = {
-		.name			= "VDVI",
-		.min_uV			= 1800000,
-		.max_uV			= 1800000,
-		.valid_modes_mask	= REGULATOR_MODE_NORMAL
-					| REGULATOR_MODE_STANDBY,
-		.valid_ops_mask		= REGULATOR_CHANGE_MODE
-					| REGULATOR_CHANGE_STATUS,
-	},
-	.num_consumer_supplies	= 1,
-	.consumer_supplies	= &cm_t35_vdvi_supply,
-};
-static struct twl4030_usb_data cm_t35_usb_data = {
-	.usb_mode	= T2_USB_MODE_ULPI,
 };
 static uint32_t cm_t35_keymap[] = {
@@ -481,10 +444,6 @@ static int cm_t35_twl_gpio_setup(struct device *dev, unsigned gpio,
 	mmc[0].gpio_cd = gpio + 0;
 	omap2_hsmmc_init(mmc);
-	/* link regulators to MMC adapters */
-	cm_t35_vmmc1_supply.dev = mmc[0].dev;
-	cm_t35_vsim_supply.dev = mmc[0].dev;
 	return 0;
 }
@@ -496,21 +455,23 @@ static struct twl4030_gpio_platform_data cm_t35_gpio_data = {
 };
 static struct twl4030_platform_data cm_t35_twldata = {
-	.irq_base	= TWL4030_IRQ_BASE,
-	.irq_end	= TWL4030_IRQ_END,
 	/* platform_data for children goes here */
 	.keypad		= &cm_t35_kp_data,
-	.usb		= &cm_t35_usb_data,
 	.gpio		= &cm_t35_gpio_data,
 	.vmmc1		= &cm_t35_vmmc1,
 	.vsim		= &cm_t35_vsim,
-	.vdac		= &cm_t35_vdac,
-	.vpll2		= &cm_t35_vpll2,
 };
 static void __init cm_t35_init_i2c(void)
 {
+	omap3_pmic_get_config(&cm_t35_twldata, TWL_COMMON_PDATA_USB,
+			TWL_COMMON_REGULATOR_VDAC | TWL_COMMON_REGULATOR_VPLL2);
+	cm_t35_twldata.vpll2->constraints.name = "VDVI";
+	cm_t35_twldata.vpll2->num_consumer_supplies =
+						ARRAY_SIZE(cm_t35_vdvi_supply);
+	cm_t35_twldata.vpll2->consumer_supplies = cm_t35_vdvi_supply;
 	omap3_pmic_init("tps65930", &cm_t35_twldata);
 }
@@ -646,7 +607,7 @@ MACHINE_START(CM_T35, "Compulab CM-T35")
 	.reserve	= omap_reserve,
 	.map_io		= omap3_map_io,
 	.init_early	= cm_t35_init_early,
-	.init_irq	= omap_init_irq,
+	.init_irq	= omap3_init_irq,
 	.init_machine	= cm_t35_init,
-	.timer		= &omap_timer,
+	.timer		= &omap3_timer,
 MACHINE_END
--- a/arch/arm/mach-omap2/board-cm-t3517.c
+++ b/arch/arm/mach-omap2/board-cm-t3517.c
@@ -236,7 +236,6 @@ static struct mtd_partition cm_t3517_nand_partitions[] = {
 static struct omap_nand_platform_data cm_t3517_nand_data = {
 	.parts			= cm_t3517_nand_partitions,
 	.nr_parts		= ARRAY_SIZE(cm_t3517_nand_partitions),
-	.dma_channel		= -1,	/* disable DMA in OMAP NAND driver */
 	.cs			= 0,
 };
@@ -304,7 +303,7 @@ MACHINE_START(CM_T3517, "Compulab CM-T3517")
 	.reserve        = omap_reserve,
 	.map_io		= omap3_map_io,
 	.init_early	= cm_t3517_init_early,
-	.init_irq	= omap_init_irq,
+	.init_irq	= omap3_init_irq,
 	.init_machine	= cm_t3517_init,
-	.timer		= &omap_timer,
+	.timer		= &omap3_timer,
 MACHINE_END
--- a/arch/arm/mach-omap2/board-devkit8000.c
+++ b/arch/arm/mach-omap2/board-devkit8000.c
@@ -58,7 +58,6 @@
 #include "mux.h"
 #include "hsmmc.h"
-#include "timer-gp.h"
 #include "common-board-devices.h"
 #define OMAP_DM9000_GPIO_IRQ	25
@@ -130,13 +129,14 @@ static void devkit8000_panel_disable_dvi(struct omap_dss_device *dssdev)
 		gpio_set_value_cansleep(dssdev->reset_gpio, 0);
 }
-static struct regulator_consumer_supply devkit8000_vmmc1_supply =
+static struct regulator_consumer_supply devkit8000_vmmc1_supply[] = {
-	REGULATOR_SUPPLY("vmmc", "omap_hsmmc.0");
+	REGULATOR_SUPPLY("vmmc", "omap_hsmmc.0"),
+};
 /* ads7846 on SPI */
-static struct regulator_consumer_supply devkit8000_vio_supply =
+static struct regulator_consumer_supply devkit8000_vio_supply[] = {
-	REGULATOR_SUPPLY("vcc", "spi2.0");
+	REGULATOR_SUPPLY("vcc", "spi2.0"),
+};
 static struct panel_generic_dpi_data lcd_panel = {
 	.name			= "generic",
@@ -186,9 +186,6 @@ static struct omap_dss_board_info devkit8000_dss_data = {
 	.default_device = &devkit8000_lcd_device,
 };
-static struct regulator_consumer_supply devkit8000_vdda_dac_supply =
-	REGULATOR_SUPPLY("vdda_dac", "omapdss_venc");
 static uint32_t board_keymap[] = {
 	KEY(0, 0, KEY_1),
 	KEY(1, 0, KEY_2),
@@ -284,22 +281,8 @@ static struct regulator_init_data devkit8000_vmmc1 = {
 					| REGULATOR_CHANGE_MODE
 					| REGULATOR_CHANGE_STATUS,
 	},
-	.num_consumer_supplies	= 1,
+	.num_consumer_supplies	= ARRAY_SIZE(devkit8000_vmmc1_supply),
-	.consumer_supplies	= &devkit8000_vmmc1_supply,
+	.consumer_supplies	= devkit8000_vmmc1_supply,
-};
-/* VDAC for DSS driving S-Video (8 mA unloaded, max 65 mA) */
-static struct regulator_init_data devkit8000_vdac = {
-	.constraints = {
-		.min_uV			= 1800000,
-		.max_uV			= 1800000,
-		.valid_modes_mask	= REGULATOR_MODE_NORMAL
-					| REGULATOR_MODE_STANDBY,
-		.valid_ops_mask		= REGULATOR_CHANGE_MODE
-					| REGULATOR_CHANGE_STATUS,
-	},
-	.num_consumer_supplies	= 1,
-	.consumer_supplies	= &devkit8000_vdda_dac_supply,
 };
 /* VPLL1 for digital video outputs */
@@ -327,31 +310,14 @@ static struct regulator_init_data devkit8000_vio = {
 		.valid_ops_mask         = REGULATOR_CHANGE_MODE
 			| REGULATOR_CHANGE_STATUS,
 	},
-	.num_consumer_supplies  = 1,
+	.num_consumer_supplies  = ARRAY_SIZE(devkit8000_vio_supply),
-	.consumer_supplies      = &devkit8000_vio_supply,
+	.consumer_supplies      = devkit8000_vio_supply,
-};
-static struct twl4030_usb_data devkit8000_usb_data = {
-	.usb_mode	= T2_USB_MODE_ULPI,
-};
-static struct twl4030_codec_audio_data devkit8000_audio_data;
-static struct twl4030_codec_data devkit8000_codec_data = {
-	.audio_mclk = 26000000,
-	.audio = &devkit8000_audio_data,
 };
 static struct twl4030_platform_data devkit8000_twldata = {
-	.irq_base	= TWL4030_IRQ_BASE,
-	.irq_end	= TWL4030_IRQ_END,
 	/* platform_data for children goes here */
-	.usb		= &devkit8000_usb_data,
 	.gpio		= &devkit8000_gpio_data,
-	.codec		= &devkit8000_codec_data,
 	.vmmc1		= &devkit8000_vmmc1,
-	.vdac		= &devkit8000_vdac,
 	.vpll1		= &devkit8000_vpll1,
 	.vio		= &devkit8000_vio,
 	.keypad		= &devkit8000_kp_data,
@@ -359,6 +325,9 @@ static struct twl4030_platform_data devkit8000_twldata = {
 static int __init devkit8000_i2c_init(void)
 {
+	omap3_pmic_get_config(&devkit8000_twldata,
+			  TWL_COMMON_PDATA_USB | TWL_COMMON_PDATA_AUDIO,
+			  TWL_COMMON_REGULATOR_VDAC);
 	omap3_pmic_init("tps65930", &devkit8000_twldata);
 	/* Bus 3 is attached to the DVI port where devices like the pico DLP
 	 * projector don't work reliably with 400kHz */
@@ -438,10 +407,7 @@ static void __init devkit8000_init_early(void)
 static void __init devkit8000_init_irq(void)
 {
-	omap_init_irq();
+	omap3_init_irq();
-#ifdef CONFIG_OMAP_32K_TIMER
-	omap2_gp_clockevent_set_gptimer(12);
-#endif
 }
 #define OMAP_DM9000_BASE	0x2c000000
@@ -707,5 +673,5 @@ MACHINE_START(DEVKIT8000, "OMAP3 Devkit8000")
 	.init_early	= devkit8000_init_early,
 	.init_irq	= devkit8000_init_irq,
 	.init_machine	= devkit8000_init,
-	.timer		= &omap_timer,
+	.timer		= &omap3_secure_timer,
 MACHINE_END
--- a/arch/arm/mach-omap2/board-flash.c
+++ b/arch/arm/mach-omap2/board-flash.c
@@ -132,11 +132,7 @@ static struct gpmc_timings nand_timings = {
 };
 static struct omap_nand_platform_data board_nand_data = {
-	.nand_setup	= NULL,
 	.gpmc_t		= &nand_timings,
-	.dma_channel	= -1,		/* disable DMA in OMAP NAND driver */
-	.dev_ready	= NULL,
-	.devsize	= 0,	/* '0' for 8-bit, '1' for 16-bit device */
 };
 void

--- a/arch/arm/mach-omap2/board-generic.c
+++ b/arch/arm/mach-omap2/board-generic.c
@@ -70,7 +70,7 @@ MACHINE_START(OMAP_GENERIC, "Generic OMAP24xx")
 	.reserve	= omap_reserve,
 	.map_io		= omap_generic_map_io,
 	.init_early	= omap_generic_init_early,
-	.init_irq	= omap_init_irq,
+	.init_irq	= omap2_init_irq,
 	.init_machine	= omap_generic_init,
-	.timer		= &omap_timer,
+	.timer		= &omap2_timer,
 MACHINE_END
--- a/arch/arm/mach-omap2/board-h4.c
+++ b/arch/arm/mach-omap2/board-h4.c
@@ -298,7 +298,7 @@ static void __init omap_h4_init_early(void)
 static void __init omap_h4_init_irq(void)
 {
-	omap_init_irq();
+	omap2_init_irq();
 }
 static struct at24_platform_data m24c01 = {
@@ -388,5 +388,5 @@ MACHINE_START(OMAP_H4, "OMAP2420 H4 board")
 	.init_early	= omap_h4_init_early,
 	.init_irq	= omap_h4_init_irq,
 	.init_machine	= omap_h4_init,
-	.timer		= &omap_timer,
+	.timer		= &omap2_timer,
 MACHINE_END
--- a/arch/arm/mach-omap2/board-igep0020.c
+++ b/arch/arm/mach-omap2/board-igep0020.c
@@ -222,8 +222,9 @@ static inline void __init igep2_init_smsc911x(void)
 static inline void __init igep2_init_smsc911x(void) { }
 #endif
-static struct regulator_consumer_supply igep_vmmc1_supply =
+static struct regulator_consumer_supply igep_vmmc1_supply[] = {
-	REGULATOR_SUPPLY("vmmc", "omap_hsmmc.0");
+	REGULATOR_SUPPLY("vmmc", "omap_hsmmc.0"),
+};
 /* VMMC1 for OMAP VDD_MMC1 (i/o) and MMC1 card */
 static struct regulator_init_data igep_vmmc1 = {
@@ -236,12 +237,13 @@ static struct regulator_init_data igep_vmmc1 = {
 					| REGULATOR_CHANGE_MODE
 					| REGULATOR_CHANGE_STATUS,
 	},
-	.num_consumer_supplies  = 1,
+	.num_consumer_supplies  = ARRAY_SIZE(igep_vmmc1_supply),
-	.consumer_supplies      = &igep_vmmc1_supply,
+	.consumer_supplies      = igep_vmmc1_supply,
 };
-static struct regulator_consumer_supply igep_vio_supply =
+static struct regulator_consumer_supply igep_vio_supply[] = {
-	REGULATOR_SUPPLY("vmmc_aux", "omap_hsmmc.1");
+	REGULATOR_SUPPLY("vmmc_aux", "omap_hsmmc.1"),
+};
 static struct regulator_init_data igep_vio = {
 	.constraints = {
@@ -254,20 +256,21 @@ static struct regulator_init_data igep_vio = {
 					| REGULATOR_CHANGE_MODE
 					| REGULATOR_CHANGE_STATUS,
 	},
-	.num_consumer_supplies  = 1,
+	.num_consumer_supplies  = ARRAY_SIZE(igep_vio_supply),
-	.consumer_supplies      = &igep_vio_supply,
+	.consumer_supplies      = igep_vio_supply,
 };
-static struct regulator_consumer_supply igep_vmmc2_supply =
+static struct regulator_consumer_supply igep_vmmc2_supply[] = {
-	REGULATOR_SUPPLY("vmmc", "omap_hsmmc.1");
+	REGULATOR_SUPPLY("vmmc", "omap_hsmmc.1"),
+};
 static struct regulator_init_data igep_vmmc2 = {
 	.constraints		= {
 		.valid_modes_mask	= REGULATOR_MODE_NORMAL,
 		.always_on		= 1,
 	},
-	.num_consumer_supplies	= 1,
+	.num_consumer_supplies	= ARRAY_SIZE(igep_vmmc2_supply),
-	.consumer_supplies	= &igep_vmmc2_supply,
+	.consumer_supplies	= igep_vmmc2_supply,
 };
 static struct fixed_voltage_config igep_vwlan = {
@@ -440,10 +443,6 @@ static struct twl4030_gpio_platform_data igep_twl4030_gpio_pdata = {
 	.setup		= igep_twl_gpio_setup,
 };
-static struct twl4030_usb_data igep_usb_data = {
-	.usb_mode	= T2_USB_MODE_ULPI,
-};
 static int igep2_enable_dvi(struct omap_dss_device *dssdev)
 {
 	gpio_direction_output(IGEP2_GPIO_DVI_PUP, 1);
@@ -480,26 +479,6 @@ static struct omap_dss_board_info igep2_dss_data = {
 	.default_device	= &igep2_dvi_device,
 };
-static struct regulator_consumer_supply igep2_vpll2_supplies[] = {
-	REGULATOR_SUPPLY("vdds_dsi", "omapdss"),
-	REGULATOR_SUPPLY("vdds_dsi", "omapdss_dsi1"),
-};
-static struct regulator_init_data igep2_vpll2 = {
-	.constraints = {
-		.name			= "VDVI",
-		.min_uV			= 1800000,
-		.max_uV			= 1800000,
-		.apply_uV		= true,
-		.valid_modes_mask	= REGULATOR_MODE_NORMAL
-					| REGULATOR_MODE_STANDBY,
-		.valid_ops_mask		= REGULATOR_CHANGE_MODE
-					| REGULATOR_CHANGE_STATUS,
-	},
-	.num_consumer_supplies	= ARRAY_SIZE(igep2_vpll2_supplies),
-	.consumer_supplies	= igep2_vpll2_supplies,
-};
 static void __init igep2_display_init(void)
 {
 	int err = gpio_request_one(IGEP2_GPIO_DVI_PUP, GPIOF_OUT_INIT_HIGH,
@@ -519,13 +498,6 @@ static void __init igep_init_early(void)
 				  m65kxxxxam_sdrc_params);
 }
-static struct twl4030_codec_audio_data igep2_audio_data;
-static struct twl4030_codec_data igep2_codec_data = {
-	.audio_mclk = 26000000,
-	.audio = &igep2_audio_data,
-};
 static int igep2_keymap[] = {
 	KEY(0, 0, KEY_LEFT),
 	KEY(0, 1, KEY_RIGHT),
@@ -558,11 +530,7 @@ static struct twl4030_keypad_data igep2_keypad_pdata = {
 };
 static struct twl4030_platform_data igep_twldata = {
-	.irq_base	= TWL4030_IRQ_BASE,
-	.irq_end	= TWL4030_IRQ_END,
 	/* platform_data for children goes here */
-	.usb		= &igep_usb_data,
 	.gpio		= &igep_twl4030_gpio_pdata,
 	.vmmc1          = &igep_vmmc1,
 	.vio		= &igep_vio,
@@ -578,6 +546,8 @@ static void __init igep_i2c_init(void)
 {
 	int ret;
+	omap3_pmic_get_config(&igep_twldata, TWL_COMMON_PDATA_USB, 0);
 	if (machine_is_igep0020()) {
 		/*
 		 * Bus 3 is attached to the DVI port where devices like the
@@ -588,9 +558,12 @@ static void __init igep_i2c_init(void)
 		if (ret)
 			pr_warning("IGEP2: Could not register I2C3 bus (%d)\n", ret);
-		igep_twldata.codec	= &igep2_codec_data;
 		igep_twldata.keypad	= &igep2_keypad_pdata;
-		igep_twldata.vpll2	= &igep2_vpll2;
+		/* Get common pmic data */
+		omap3_pmic_get_config(&igep_twldata, TWL_COMMON_PDATA_AUDIO,
+				      TWL_COMMON_REGULATOR_VPLL2);
+		igep_twldata.vpll2->constraints.apply_uV = true;
+		igep_twldata.vpll2->constraints.name = "VDVI";
 	}
 	omap3_pmic_init("twl4030", &igep_twldata);
@@ -703,9 +676,9 @@ MACHINE_START(IGEP0020, "IGEP v2 board")
 	.reserve	= omap_reserve,
 	.map_io		= omap3_map_io,
 	.init_early	= igep_init_early,
-	.init_irq	= omap_init_irq,
+	.init_irq	= omap3_init_irq,
 	.init_machine	= igep_init,
-	.timer		= &omap_timer,
+	.timer		= &omap3_timer,
 MACHINE_END
 MACHINE_START(IGEP0030, "IGEP OMAP3 module")
@@ -713,7 +686,7 @@ MACHINE_START(IGEP0030, "IGEP OMAP3 module")
 	.reserve	= omap_reserve,
 	.map_io		= omap3_map_io,
 	.init_early	= igep_init_early,
-	.init_irq	= omap_init_irq,
+	.init_irq	= omap3_init_irq,
 	.init_machine	= igep_init,
-	.timer		= &omap_timer,
+	.timer		= &omap3_timer,
 MACHINE_END
--- a/arch/arm/mach-omap2/board-ldp.c
+++ b/arch/arm/mach-omap2/board-ldp.c
@@ -199,22 +199,14 @@ static void __init omap_ldp_init_early(void)
 	omap2_init_common_devices(NULL, NULL);
 }
-static struct twl4030_usb_data ldp_usb_data = {
-	.usb_mode	= T2_USB_MODE_ULPI,
-};
 static struct twl4030_gpio_platform_data ldp_gpio_data = {
 	.gpio_base	= OMAP_MAX_GPIO_LINES,
 	.irq_base	= TWL4030_GPIO_IRQ_BASE,
 	.irq_end	= TWL4030_GPIO_IRQ_END,
 };
-static struct twl4030_madc_platform_data ldp_madc_data = {
+static struct regulator_consumer_supply ldp_vmmc1_supply[] = {
-	.irq_line	= 1,
+	REGULATOR_SUPPLY("vmmc", "omap_hsmmc.0"),
-};
-static struct regulator_consumer_supply ldp_vmmc1_supply = {
-	.supply			= "vmmc",
 };
 /* VMMC1 for MMC1 pins CMD, CLK, DAT0..DAT3 (20 mA, plus card == max 220 mA) */
@@ -228,8 +220,8 @@ static struct regulator_init_data ldp_vmmc1 = {
 					| REGULATOR_CHANGE_MODE
 					| REGULATOR_CHANGE_STATUS,
 	},
-	.num_consumer_supplies	= 1,
+	.num_consumer_supplies	= ARRAY_SIZE(ldp_vmmc1_supply),
-	.consumer_supplies	= &ldp_vmmc1_supply,
+	.consumer_supplies	= ldp_vmmc1_supply,
 };
 /* ads7846 on SPI */
@@ -253,12 +245,7 @@ static struct regulator_init_data ldp_vaux1 = {
 };
 static struct twl4030_platform_data ldp_twldata = {
-	.irq_base	= TWL4030_IRQ_BASE,
-	.irq_end	= TWL4030_IRQ_END,
 	/* platform_data for children goes here */
-	.madc		= &ldp_madc_data,
-	.usb		= &ldp_usb_data,
 	.vmmc1		= &ldp_vmmc1,
 	.vaux1		= &ldp_vaux1,
 	.gpio		= &ldp_gpio_data,
@@ -267,6 +254,8 @@ static struct twl4030_platform_data ldp_twldata = {
 static int __init omap_i2c_init(void)
 {
+	omap3_pmic_get_config(&ldp_twldata,
+			  TWL_COMMON_PDATA_USB | TWL_COMMON_PDATA_MADC, 0);
 	omap3_pmic_init("twl4030", &ldp_twldata);
 	omap_register_i2c_bus(2, 400, NULL, 0);
 	omap_register_i2c_bus(3, 400, NULL, 0);
@@ -341,8 +330,6 @@ static void __init omap_ldp_init(void)
 		ARRAY_SIZE(ldp_nand_partitions), ZOOM_NAND_CS, 0);
 	omap2_hsmmc_init(mmc);
-	/* link regulators to MMC adapters */
-	ldp_vmmc1_supply.dev = mmc[0].dev;
 }
 MACHINE_START(OMAP_LDP, "OMAP LDP board")
@@ -350,7 +337,7 @@ MACHINE_START(OMAP_LDP, "OMAP LDP board")
 	.reserve	= omap_reserve,
 	.map_io		= omap3_map_io,
 	.init_early	= omap_ldp_init_early,
-	.init_irq	= omap_init_irq,
+	.init_irq	= omap3_init_irq,
 	.init_machine	= omap_ldp_init,
-	.timer		= &omap_timer,
+	.timer		= &omap3_timer,
 MACHINE_END
--- a/arch/arm/mach-omap2/board-n8x0.c
+++ b/arch/arm/mach-omap2/board-n8x0.c
@@ -699,9 +699,9 @@ MACHINE_START(NOKIA_N800, "Nokia N800")
 	.reserve	= omap_reserve,
 	.map_io		= n8x0_map_io,
 	.init_early	= n8x0_init_early,
-	.init_irq	= omap_init_irq,
+	.init_irq	= omap2_init_irq,
 	.init_machine	= n8x0_init_machine,
-	.timer		= &omap_timer,
+	.timer		= &omap2_timer,
 MACHINE_END
 MACHINE_START(NOKIA_N810, "Nokia N810")
@@ -709,9 +709,9 @@ MACHINE_START(NOKIA_N810, "Nokia N810")
 	.reserve	= omap_reserve,
 	.map_io		= n8x0_map_io,
 	.init_early	= n8x0_init_early,
-	.init_irq	= omap_init_irq,
+	.init_irq	= omap2_init_irq,
 	.init_machine	= n8x0_init_machine,
-	.timer		= &omap_timer,
+	.timer		= &omap2_timer,
 MACHINE_END
 MACHINE_START(NOKIA_N810_WIMAX, "Nokia N810 WiMAX")
@@ -719,7 +719,7 @@ MACHINE_START(NOKIA_N810_WIMAX, "Nokia N810 WiMAX")
 	.reserve	= omap_reserve,
 	.map_io		= n8x0_map_io,
 	.init_early	= n8x0_init_early,
-	.init_irq	= omap_init_irq,
+	.init_irq	= omap2_init_irq,
 	.init_machine	= n8x0_init_machine,
-	.timer		= &omap_timer,
+	.timer		= &omap2_timer,
 MACHINE_END
--- a/arch/arm/mach-omap2/board-omap3beagle.c
+++ b/arch/arm/mach-omap2/board-omap3beagle.c
@@ -50,7 +50,6 @@
 #include "mux.h"
 #include "hsmmc.h"
-#include "timer-gp.h"
 #include "pm.h"
 #include "common-board-devices.h"
@@ -210,14 +209,6 @@ static struct omap_dss_board_info beagle_dss_data = {
 	.default_device = &beagle_dvi_device,
 };
-static struct regulator_consumer_supply beagle_vdac_supply =
-	REGULATOR_SUPPLY("vdda_dac", "omapdss_venc");
-static struct regulator_consumer_supply beagle_vdvi_supplies[] = {
-	REGULATOR_SUPPLY("vdds_dsi", "omapdss"),
-	REGULATOR_SUPPLY("vdds_dsi", "omapdss_dsi1"),
-};
 static void __init beagle_display_init(void)
 {
 	int r;
@@ -239,12 +230,12 @@ static struct omap2_hsmmc_info mmc[] = {
 	{}	/* Terminator */
 };
-static struct regulator_consumer_supply beagle_vmmc1_supply = {
+static struct regulator_consumer_supply beagle_vmmc1_supply[] = {
-	.supply			= "vmmc",
+	REGULATOR_SUPPLY("vmmc", "omap_hsmmc.0"),
 };
-static struct regulator_consumer_supply beagle_vsim_supply = {
+static struct regulator_consumer_supply beagle_vsim_supply[] = {
-	.supply			= "vmmc_aux",
+	REGULATOR_SUPPLY("vmmc_aux", "omap_hsmmc.0"),
 };
 static struct gpio_led gpio_leds[];
@@ -267,10 +258,6 @@ static int beagle_twl_gpio_setup(struct device *dev,
 	mmc[0].gpio_cd = gpio + 0;
 	omap2_hsmmc_init(mmc);
-	/* link regulators to MMC adapters */
-	beagle_vmmc1_supply.dev = mmc[0].dev;
-	beagle_vsim_supply.dev = mmc[0].dev;
 	/*
 	 * TWL4030_GPIO_MAX + 0 == ledA, EHCI nEN_USB_PWR (out, XM active
 	 * high / others active low)
@@ -336,8 +323,8 @@ static struct regulator_init_data beagle_vmmc1 = {
 					| REGULATOR_CHANGE_MODE
 					| REGULATOR_CHANGE_STATUS,
 	},
-	.num_consumer_supplies	= 1,
+	.num_consumer_supplies	= ARRAY_SIZE(beagle_vmmc1_supply),
-	.consumer_supplies	= &beagle_vmmc1_supply,
+	.consumer_supplies	= beagle_vmmc1_supply,
 };
 /* VSIM for MMC1 pins DAT4..DAT7 (2 mA, plus card == max 50 mA) */
@@ -351,62 +338,15 @@ static struct regulator_init_data beagle_vsim = {
 					| REGULATOR_CHANGE_MODE
 					| REGULATOR_CHANGE_STATUS,
 	},
-	.num_consumer_supplies	= 1,
+	.num_consumer_supplies	= ARRAY_SIZE(beagle_vsim_supply),
-	.consumer_supplies	= &beagle_vsim_supply,
+	.consumer_supplies	= beagle_vsim_supply,
-};
-/* VDAC for DSS driving S-Video (8 mA unloaded, max 65 mA) */
-static struct regulator_init_data beagle_vdac = {
-	.constraints = {
-		.min_uV			= 1800000,
-		.max_uV			= 1800000,
-		.valid_modes_mask	= REGULATOR_MODE_NORMAL
-					| REGULATOR_MODE_STANDBY,
-		.valid_ops_mask		= REGULATOR_CHANGE_MODE
-					| REGULATOR_CHANGE_STATUS,
-	},
-	.num_consumer_supplies	= 1,
-	.consumer_supplies	= &beagle_vdac_supply,
-};
-/* VPLL2 for digital video outputs */
-static struct regulator_init_data beagle_vpll2 = {
-	.constraints = {
-		.name			= "VDVI",
-		.min_uV			= 1800000,
-		.max_uV			= 1800000,
-		.valid_modes_mask	= REGULATOR_MODE_NORMAL
-					| REGULATOR_MODE_STANDBY,
-		.valid_ops_mask		= REGULATOR_CHANGE_MODE
-					| REGULATOR_CHANGE_STATUS,
-	},
-	.num_consumer_supplies	= ARRAY_SIZE(beagle_vdvi_supplies),
-	.consumer_supplies	= beagle_vdvi_supplies,
-};
-static struct twl4030_usb_data beagle_usb_data = {
-	.usb_mode	= T2_USB_MODE_ULPI,
-};
-static struct twl4030_codec_audio_data beagle_audio_data;
-static struct twl4030_codec_data beagle_codec_data = {
-	.audio_mclk = 26000000,
-	.audio = &beagle_audio_data,
 };
 static struct twl4030_platform_data beagle_twldata = {
-	.irq_base	= TWL4030_IRQ_BASE,
-	.irq_end	= TWL4030_IRQ_END,
 	/* platform_data for children goes here */
-	.usb		= &beagle_usb_data,
 	.gpio		= &beagle_gpio_data,
-	.codec		= &beagle_codec_data,
 	.vmmc1		= &beagle_vmmc1,
 	.vsim		= &beagle_vsim,
-	.vdac		= &beagle_vdac,
-	.vpll2		= &beagle_vpll2,
 };
 static struct i2c_board_info __initdata beagle_i2c_eeprom[] = {
@@ -417,6 +357,12 @@ static struct i2c_board_info __initdata beagle_i2c_eeprom[] = {
 static int __init omap3_beagle_i2c_init(void)
 {
+	omap3_pmic_get_config(&beagle_twldata,
+			TWL_COMMON_PDATA_USB | TWL_COMMON_PDATA_AUDIO,
+			TWL_COMMON_REGULATOR_VDAC | TWL_COMMON_REGULATOR_VPLL2);
+	beagle_twldata.vpll2->constraints.name = "VDVI";
 	omap3_pmic_init("twl4030", &beagle_twldata);
 	/* Bus 3 is attached to the DVI port where devices like the pico DLP
 	 * projector don't work reliably with 400kHz */
@@ -486,10 +432,7 @@ static void __init omap3_beagle_init_early(void)
 static void __init omap3_beagle_init_irq(void)
 {
-	omap_init_irq();
+	omap3_init_irq();
-#ifdef CONFIG_OMAP_32K_TIMER
-	omap2_gp_clockevent_set_gptimer(12);
-#endif
 }
 static struct platform_device *omap3_beagle_devices[] __initdata = {
@@ -599,5 +542,5 @@ MACHINE_START(OMAP3_BEAGLE, "OMAP3 Beagle Board")
 	.init_early	= omap3_beagle_init_early,
 	.init_irq	= omap3_beagle_init_irq,
 	.init_machine	= omap3_beagle_init,
-	.timer		= &omap_timer,
+	.timer		= &omap3_secure_timer,
 MACHINE_END
--- a/arch/arm/mach-omap2/board-omap3evm.c
+++ b/arch/arm/mach-omap2/board-omap3evm.c
@@ -273,12 +273,12 @@ static struct omap_dss_board_info omap3_evm_dss_data = {
 	.default_device	= &omap3_evm_lcd_device,
 };
-static struct regulator_consumer_supply omap3evm_vmmc1_supply = {
+static struct regulator_consumer_supply omap3evm_vmmc1_supply[] = {
-	.supply			= "vmmc",
+	REGULATOR_SUPPLY("vmmc", "omap_hsmmc.0"),
 };
-static struct regulator_consumer_supply omap3evm_vsim_supply = {
+static struct regulator_consumer_supply omap3evm_vsim_supply[] = {
-	.supply			= "vmmc_aux",
+	REGULATOR_SUPPLY("vmmc_aux", "omap_hsmmc.0"),
 };
 /* VMMC1 for MMC1 pins CMD, CLK, DAT0..DAT3 (20 mA, plus card == max 220 mA) */
@@ -292,8 +292,8 @@ static struct regulator_init_data omap3evm_vmmc1 = {
 					| REGULATOR_CHANGE_MODE
 					| REGULATOR_CHANGE_STATUS,
 	},
-	.num_consumer_supplies	= 1,
+	.num_consumer_supplies	= ARRAY_SIZE(omap3evm_vmmc1_supply),
-	.consumer_supplies	= &omap3evm_vmmc1_supply,
+	.consumer_supplies	= omap3evm_vmmc1_supply,
 };
 /* VSIM for MMC1 pins DAT4..DAT7 (2 mA, plus card == max 50 mA) */
@@ -307,8 +307,8 @@ static struct regulator_init_data omap3evm_vsim = {
 					| REGULATOR_CHANGE_MODE
 					| REGULATOR_CHANGE_STATUS,
 	},
-	.num_consumer_supplies	= 1,
+	.num_consumer_supplies	= ARRAY_SIZE(omap3evm_vsim_supply),
-	.consumer_supplies	= &omap3evm_vsim_supply,
+	.consumer_supplies	= omap3evm_vsim_supply,
 };
 static struct omap2_hsmmc_info mmc[] = {
@@ -365,10 +365,6 @@ static int omap3evm_twl_gpio_setup(struct device *dev,
 	mmc[0].gpio_cd = gpio + 0;
 	omap2_hsmmc_init(mmc);
-	/* link regulators to MMC adapters */
-	omap3evm_vmmc1_supply.dev = mmc[0].dev;
-	omap3evm_vsim_supply.dev = mmc[0].dev;
 	/*
 	 * Most GPIOs are for USB OTG.  Some are mostly sent to
 	 * the P2 connector; notably LEDA for the LCD backlight.
@@ -400,10 +396,6 @@ static struct twl4030_gpio_platform_data omap3evm_gpio_data = {
 	.setup		= omap3evm_twl_gpio_setup,
 };
-static struct twl4030_usb_data omap3evm_usb_data = {
-	.usb_mode	= T2_USB_MODE_ULPI,
-};
 static uint32_t board_keymap[] = {
 	KEY(0, 0, KEY_LEFT),
 	KEY(0, 1, KEY_DOWN),
@@ -438,58 +430,10 @@ static struct twl4030_keypad_data omap3evm_kp_data = {
 	.rep		= 1,
 };
-static struct twl4030_madc_platform_data omap3evm_madc_data = {
-	.irq_line	= 1,
-};
-static struct twl4030_codec_audio_data omap3evm_audio_data;
-static struct twl4030_codec_data omap3evm_codec_data = {
-	.audio_mclk = 26000000,
-	.audio = &omap3evm_audio_data,
-};
-static struct regulator_consumer_supply omap3_evm_vdda_dac_supply =
-	REGULATOR_SUPPLY("vdda_dac", "omapdss_venc");
-/* VDAC for DSS driving S-Video */
-static struct regulator_init_data omap3_evm_vdac = {
-	.constraints = {
-		.min_uV			= 1800000,
-		.max_uV			= 1800000,
-		.apply_uV		= true,
-		.valid_modes_mask	= REGULATOR_MODE_NORMAL
-					| REGULATOR_MODE_STANDBY,
-		.valid_ops_mask		= REGULATOR_CHANGE_MODE
-					| REGULATOR_CHANGE_STATUS,
-	},
-	.num_consumer_supplies	= 1,
-	.consumer_supplies	= &omap3_evm_vdda_dac_supply,
-};
-/* VPLL2 for digital video outputs */
-static struct regulator_consumer_supply omap3_evm_vpll2_supplies[] = {
-	REGULATOR_SUPPLY("vdds_dsi", "omapdss"),
-	REGULATOR_SUPPLY("vdds_dsi", "omapdss_dsi1"),
-};
-static struct regulator_init_data omap3_evm_vpll2 = {
-	.constraints = {
-		.min_uV			= 1800000,
-		.max_uV			= 1800000,
-		.apply_uV		= true,
-		.valid_modes_mask	= REGULATOR_MODE_NORMAL
-					| REGULATOR_MODE_STANDBY,
-		.valid_ops_mask		= REGULATOR_CHANGE_MODE
-					| REGULATOR_CHANGE_STATUS,
-	},
-	.num_consumer_supplies	= ARRAY_SIZE(omap3_evm_vpll2_supplies),
-	.consumer_supplies	= omap3_evm_vpll2_supplies,
-};
 /* ads7846 on SPI */
-static struct regulator_consumer_supply omap3evm_vio_supply =
+static struct regulator_consumer_supply omap3evm_vio_supply[] = {
-	REGULATOR_SUPPLY("vcc", "spi1.0");
+	REGULATOR_SUPPLY("vcc", "spi1.0"),
+};
 /* VIO for ads7846 */
 static struct regulator_init_data omap3evm_vio = {
@@ -502,8 +446,8 @@ static struct regulator_init_data omap3evm_vio = {
 		.valid_ops_mask		= REGULATOR_CHANGE_MODE
 					| REGULATOR_CHANGE_STATUS,
 	},
-	.num_consumer_supplies	= 1,
+	.num_consumer_supplies	= ARRAY_SIZE(omap3evm_vio_supply),
-	.consumer_supplies	= &omap3evm_vio_supply,
+	.consumer_supplies	= omap3evm_vio_supply,
 };
 #ifdef CONFIG_WL12XX_PLATFORM_DATA
@@ -511,16 +455,17 @@ static struct regulator_init_data omap3evm_vio = {
 #define OMAP3EVM_WLAN_PMENA_GPIO	(150)
 #define OMAP3EVM_WLAN_IRQ_GPIO		(149)
-static struct regulator_consumer_supply omap3evm_vmmc2_supply =
+static struct regulator_consumer_supply omap3evm_vmmc2_supply[] = {
-	REGULATOR_SUPPLY("vmmc", "omap_hsmmc.1");
+	REGULATOR_SUPPLY("vmmc", "omap_hsmmc.1"),
+};
 /* VMMC2 for driving the WL12xx module */
 static struct regulator_init_data omap3evm_vmmc2 = {
 	.constraints = {
 		.valid_ops_mask	= REGULATOR_CHANGE_STATUS,
 	},
-	.num_consumer_supplies	= 1,
+	.num_consumer_supplies	= ARRAY_SIZE(omap3evm_vmmc2_supply),
-	.consumer_supplies = &omap3evm_vmmc2_supply,
+	.consumer_supplies	= omap3evm_vmmc2_supply,
 };
 static struct fixed_voltage_config omap3evm_vwlan = {
@@ -548,17 +493,9 @@ struct wl12xx_platform_data omap3evm_wlan_data __initdata = {
 #endif
 static struct twl4030_platform_data omap3evm_twldata = {
-	.irq_base	= TWL4030_IRQ_BASE,
-	.irq_end	= TWL4030_IRQ_END,
 	/* platform_data for children goes here */
 	.keypad		= &omap3evm_kp_data,
-	.madc		= &omap3evm_madc_data,
-	.usb		= &omap3evm_usb_data,
 	.gpio		= &omap3evm_gpio_data,
-	.codec		= &omap3evm_codec_data,
-	.vdac		= &omap3_evm_vdac,
-	.vpll2		= &omap3_evm_vpll2,
 	.vio		= &omap3evm_vio,
 	.vmmc1		= &omap3evm_vmmc1,
 	.vsim		= &omap3evm_vsim,
@@ -566,6 +503,14 @@ static struct twl4030_platform_data omap3evm_twldata = {
 static int __init omap3_evm_i2c_init(void)
 {
+	omap3_pmic_get_config(&omap3evm_twldata,
+			TWL_COMMON_PDATA_USB | TWL_COMMON_PDATA_MADC |
+			TWL_COMMON_PDATA_AUDIO,
+			TWL_COMMON_REGULATOR_VDAC | TWL_COMMON_REGULATOR_VPLL2);
+	omap3evm_twldata.vdac->constraints.apply_uV = true;
+	omap3evm_twldata.vpll2->constraints.apply_uV = true;
 	omap3_pmic_init("twl4030", &omap3evm_twldata);
 	omap_register_i2c_bus(2, 400, NULL, 0);
 	omap_register_i2c_bus(3, 400, NULL, 0);
@@ -740,7 +685,7 @@ MACHINE_START(OMAP3EVM, "OMAP3 EVM")
 	.reserve	= omap_reserve,
 	.map_io		= omap3_map_io,
 	.init_early	= omap3_evm_init_early,
-	.init_irq	= omap_init_irq,
+	.init_irq	= omap3_init_irq,
 	.init_machine	= omap3_evm_init,
-	.timer		= &omap_timer,
+	.timer		= &omap3_timer,
 MACHINE_END
--- a/arch/arm/mach-omap2/board-omap3logic.c
+++ b/arch/arm/mach-omap2/board-omap3logic.c
@@ -35,7 +35,6 @@
 #include "mux.h"
 #include "hsmmc.h"
-#include "timer-gp.h"
 #include "control.h"
 #include "common-board-devices.h"
@@ -55,8 +54,8 @@
 #define OMAP3_TORPEDO_MMC_GPIO_CD		127
 #define OMAP3_TORPEDO_SMSC911X_GPIO_IRQ		129
-static struct regulator_consumer_supply omap3logic_vmmc1_supply = {
+static struct regulator_consumer_supply omap3logic_vmmc1_supply[] = {
-	.supply			= "vmmc",
+	REGULATOR_SUPPLY("vmmc", "omap_hsmmc.0"),
 };
 /* VMMC1 for MMC1 pins CMD, CLK, DAT0..DAT3 (20 mA, plus card == max 220 mA) */
@@ -71,8 +70,8 @@ static struct regulator_init_data omap3logic_vmmc1 = {
 					| REGULATOR_CHANGE_MODE
 					| REGULATOR_CHANGE_STATUS,
 	},
-	.num_consumer_supplies  = 1,
+	.num_consumer_supplies  = ARRAY_SIZE(omap3logic_vmmc1_supply),
-	.consumer_supplies      = &omap3logic_vmmc1_supply,
+	.consumer_supplies      = omap3logic_vmmc1_supply,
 };
 static struct twl4030_gpio_platform_data omap3logic_gpio_data = {
@@ -130,8 +129,6 @@ static void __init board_mmc_init(void)
 	}
 	omap2_hsmmc_init(board_mmc_info);
-	/* link regulators to MMC adapters */
-	omap3logic_vmmc1_supply.dev = board_mmc_info[0].dev;
 }
 static struct omap_smsc911x_platform_data __initdata board_smsc911x_data = {
@@ -215,16 +212,16 @@ MACHINE_START(OMAP3_TORPEDO, "Logic OMAP3 Torpedo board")
 	.boot_params	= 0x80000100,
 	.map_io		= omap3_map_io,
 	.init_early	= omap3logic_init_early,
-	.init_irq	= omap_init_irq,
+	.init_irq	= omap3_init_irq,
 	.init_machine	= omap3logic_init,
-	.timer		= &omap_timer,
+	.timer		= &omap3_timer,
 MACHINE_END
 MACHINE_START(OMAP3530_LV_SOM, "OMAP Logic 3530 LV SOM board")
 	.boot_params	= 0x80000100,
 	.map_io		= omap3_map_io,
 	.init_early	= omap3logic_init_early,
-	.init_irq	= omap_init_irq,
+	.init_irq	= omap3_init_irq,
 	.init_machine	= omap3logic_init,
-	.timer		= &omap_timer,
+	.timer		= &omap3_timer,
 MACHINE_END
--- a/arch/arm/mach-omap2/board-omap3pandora.c
+++ b/arch/arm/mach-omap2/board-omap3pandora.c
@@ -320,17 +320,17 @@ static struct twl4030_gpio_platform_data omap3pandora_gpio_data = {
 	.setup		= omap3pandora_twl_gpio_setup,
 };
-static struct regulator_consumer_supply pandora_vmmc1_supply =
+static struct regulator_consumer_supply pandora_vmmc1_supply[] = {
-	REGULATOR_SUPPLY("vmmc", "omap_hsmmc.0");
+	REGULATOR_SUPPLY("vmmc", "omap_hsmmc.0"),
+};
-static struct regulator_consumer_supply pandora_vmmc2_supply =
-	REGULATOR_SUPPLY("vmmc", "omap_hsmmc.1");
-static struct regulator_consumer_supply pandora_vmmc3_supply =
+static struct regulator_consumer_supply pandora_vmmc2_supply[] = {
-	REGULATOR_SUPPLY("vmmc", "omap_hsmmc.2");
+	REGULATOR_SUPPLY("vmmc", "omap_hsmmc.1")
+};
-static struct regulator_consumer_supply pandora_vdda_dac_supply =
+static struct regulator_consumer_supply pandora_vmmc3_supply[] = {
-	REGULATOR_SUPPLY("vdda_dac", "omapdss_venc");
+	REGULATOR_SUPPLY("vmmc", "omap_hsmmc.2"),
+};
 static struct regulator_consumer_supply pandora_vdds_supplies[] = {
 	REGULATOR_SUPPLY("vdds_sdi", "omapdss"),
@@ -338,11 +338,13 @@ static struct regulator_consumer_supply pandora_vdds_supplies[] = {
 	REGULATOR_SUPPLY("vdds_dsi", "omapdss_dsi1"),
 };
-static struct regulator_consumer_supply pandora_vcc_lcd_supply =
+static struct regulator_consumer_supply pandora_vcc_lcd_supply[] = {
-	REGULATOR_SUPPLY("vcc", "display0");
+	REGULATOR_SUPPLY("vcc", "display0"),
+};
-static struct regulator_consumer_supply pandora_usb_phy_supply =
+static struct regulator_consumer_supply pandora_usb_phy_supply[] = {
-	REGULATOR_SUPPLY("hsusb0", "ehci-omap.0");
+	REGULATOR_SUPPLY("hsusb0", "ehci-omap.0"),
+};
 /* ads7846 on SPI and 2 nub controllers on I2C */
 static struct regulator_consumer_supply pandora_vaux4_supplies[] = {
@@ -351,8 +353,9 @@ static struct regulator_consumer_supply pandora_vaux4_supplies[] = {
 	REGULATOR_SUPPLY("vcc", "3-0067"),
 };
-static struct regulator_consumer_supply pandora_adac_supply =
+static struct regulator_consumer_supply pandora_adac_supply[] = {
-	REGULATOR_SUPPLY("vcc", "soc-audio");
+	REGULATOR_SUPPLY("vcc", "soc-audio"),
+};
 /* VMMC1 for MMC1 pins CMD, CLK, DAT0..DAT3 (20 mA, plus card == max 220 mA) */
 static struct regulator_init_data pandora_vmmc1 = {
@@ -365,8 +368,8 @@ static struct regulator_init_data pandora_vmmc1 = {
 					| REGULATOR_CHANGE_MODE
 					| REGULATOR_CHANGE_STATUS,
 	},
-	.num_consumer_supplies	= 1,
+	.num_consumer_supplies	= ARRAY_SIZE(pandora_vmmc1_supply),
-	.consumer_supplies	= &pandora_vmmc1_supply,
+	.consumer_supplies	= pandora_vmmc1_supply,
 };
 /* VMMC2 for MMC2 pins CMD, CLK, DAT0..DAT3 (max 100 mA) */
@@ -380,38 +383,8 @@ static struct regulator_init_data pandora_vmmc2 = {
 					| REGULATOR_CHANGE_MODE
 					| REGULATOR_CHANGE_STATUS,
 	},
-	.num_consumer_supplies	= 1,
+	.num_consumer_supplies	= ARRAY_SIZE(pandora_vmmc2_supply),
-	.consumer_supplies	= &pandora_vmmc2_supply,
+	.consumer_supplies	= pandora_vmmc2_supply,
-};
-/* VDAC for DSS driving S-Video */
-static struct regulator_init_data pandora_vdac = {
-	.constraints = {
-		.min_uV			= 1800000,
-		.max_uV			= 1800000,
-		.apply_uV		= true,
-		.valid_modes_mask	= REGULATOR_MODE_NORMAL
-					| REGULATOR_MODE_STANDBY,
-		.valid_ops_mask		= REGULATOR_CHANGE_MODE
-					| REGULATOR_CHANGE_STATUS,
-	},
-	.num_consumer_supplies	= 1,
-	.consumer_supplies	= &pandora_vdda_dac_supply,
-};
-/* VPLL2 for digital video outputs */
-static struct regulator_init_data pandora_vpll2 = {
-	.constraints = {
-		.min_uV			= 1800000,
-		.max_uV			= 1800000,
-		.apply_uV		= true,
-		.valid_modes_mask	= REGULATOR_MODE_NORMAL
-					| REGULATOR_MODE_STANDBY,
-		.valid_ops_mask		= REGULATOR_CHANGE_MODE
-					| REGULATOR_CHANGE_STATUS,
-	},
-	.num_consumer_supplies	= ARRAY_SIZE(pandora_vdds_supplies),
-	.consumer_supplies	= pandora_vdds_supplies,
 };
 /* VAUX1 for LCD */
@@ -425,8 +398,8 @@ static struct regulator_init_data pandora_vaux1 = {
 		.valid_ops_mask		= REGULATOR_CHANGE_MODE
 					| REGULATOR_CHANGE_STATUS,
 	},
-	.num_consumer_supplies	= 1,
+	.num_consumer_supplies	= ARRAY_SIZE(pandora_vcc_lcd_supply),
-	.consumer_supplies	= &pandora_vcc_lcd_supply,
+	.consumer_supplies	= pandora_vcc_lcd_supply,
 };
 /* VAUX2 for USB host PHY */
@@ -440,8 +413,8 @@ static struct regulator_init_data pandora_vaux2 = {
 		.valid_ops_mask		= REGULATOR_CHANGE_MODE
 					| REGULATOR_CHANGE_STATUS,
 	},
-	.num_consumer_supplies	= 1,
+	.num_consumer_supplies	= ARRAY_SIZE(pandora_usb_phy_supply),
-	.consumer_supplies	= &pandora_usb_phy_supply,
+	.consumer_supplies	= pandora_usb_phy_supply,
 };
 /* VAUX4 for ads7846 and nubs */
@@ -470,8 +443,8 @@ static struct regulator_init_data pandora_vsim = {
 		.valid_ops_mask		= REGULATOR_CHANGE_MODE
 					| REGULATOR_CHANGE_STATUS,
 	},
-	.num_consumer_supplies	= 1,
+	.num_consumer_supplies	= ARRAY_SIZE(pandora_adac_supply),
-	.consumer_supplies	= &pandora_adac_supply,
+	.consumer_supplies	= pandora_adac_supply,
 };
 /* Fixed regulator internal to Wifi module */
@@ -479,8 +452,8 @@ static struct regulator_init_data pandora_vmmc3 = {
 	.constraints = {
 		.valid_ops_mask		= REGULATOR_CHANGE_STATUS,
 	},
-	.num_consumer_supplies	= 1,
+	.num_consumer_supplies	= ARRAY_SIZE(pandora_vmmc3_supply),
-	.consumer_supplies	= &pandora_vmmc3_supply,
+	.consumer_supplies	= pandora_vmmc3_supply,
 };
 static struct fixed_voltage_config pandora_vwlan = {
@@ -501,29 +474,12 @@ static struct platform_device pandora_vwlan_device = {
 	},
 };
-static struct twl4030_usb_data omap3pandora_usb_data = {
-	.usb_mode	= T2_USB_MODE_ULPI,
-};
-static struct twl4030_codec_audio_data omap3pandora_audio_data;
-static struct twl4030_codec_data omap3pandora_codec_data = {
-	.audio_mclk = 26000000,
-	.audio = &omap3pandora_audio_data,
-};
 static struct twl4030_bci_platform_data pandora_bci_data;
 static struct twl4030_platform_data omap3pandora_twldata = {
-	.irq_base	= TWL4030_IRQ_BASE,
-	.irq_end	= TWL4030_IRQ_END,
 	.gpio		= &omap3pandora_gpio_data,
-	.usb		= &omap3pandora_usb_data,
-	.codec		= &omap3pandora_codec_data,
 	.vmmc1		= &pandora_vmmc1,
 	.vmmc2		= &pandora_vmmc2,
-	.vdac		= &pandora_vdac,
-	.vpll2		= &pandora_vpll2,
 	.vaux1		= &pandora_vaux1,
 	.vaux2		= &pandora_vaux2,
 	.vaux4		= &pandora_vaux4,
@@ -541,6 +497,17 @@ static struct i2c_board_info __initdata omap3pandora_i2c3_boardinfo[] = {
 static int __init omap3pandora_i2c_init(void)
 {
+	omap3_pmic_get_config(&omap3pandora_twldata,
+			TWL_COMMON_PDATA_USB | TWL_COMMON_PDATA_AUDIO,
+			TWL_COMMON_REGULATOR_VDAC | TWL_COMMON_REGULATOR_VPLL2);
+	omap3pandora_twldata.vdac->constraints.apply_uV = true;
+	omap3pandora_twldata.vpll2->constraints.apply_uV = true;
+	omap3pandora_twldata.vpll2->num_consumer_supplies =
+					ARRAY_SIZE(pandora_vdds_supplies);
+	omap3pandora_twldata.vpll2->consumer_supplies = pandora_vdds_supplies;
 	omap3_pmic_init("tps65950", &omap3pandora_twldata);
 	/* i2c2 pins are not connected */
 	omap_register_i2c_bus(3, 100, omap3pandora_i2c3_boardinfo,
@@ -643,7 +610,7 @@ MACHINE_START(OMAP3_PANDORA, "Pandora Handheld Console")
 	.reserve	= omap_reserve,
 	.map_io		= omap3_map_io,
 	.init_early	= omap3pandora_init_early,
-	.init_irq	= omap_init_irq,
+	.init_irq	= omap3_init_irq,
 	.init_machine	= omap3pandora_init,
-	.timer		= &omap_timer,
+	.timer		= &omap3_timer,
 MACHINE_END
--- a/arch/arm/mach-omap2/board-omap3stalker.c
+++ b/arch/arm/mach-omap2/board-omap3stalker.c
@@ -52,7 +52,6 @@
 #include "sdram-micron-mt46h32m32lf-6.h"
 #include "mux.h"
 #include "hsmmc.h"
-#include "timer-gp.h"
 #include "common-board-devices.h"
 #if defined(CONFIG_SMSC911X) || defined(CONFIG_SMSC911X_MODULE)
@@ -206,12 +205,12 @@ static struct omap_dss_board_info omap3_stalker_dss_data = {
 	.default_device	= &omap3_stalker_dvi_device,
 };
-static struct regulator_consumer_supply omap3stalker_vmmc1_supply = {
+static struct regulator_consumer_supply omap3stalker_vmmc1_supply[] = {
-	.supply		= "vmmc",
+	REGULATOR_SUPPLY("vmmc", "omap_hsmmc.0"),
 };
-static struct regulator_consumer_supply omap3stalker_vsim_supply = {
+static struct regulator_consumer_supply omap3stalker_vsim_supply[] = {
-	.supply		= "vmmc_aux",
+	REGULATOR_SUPPLY("vmmc_aux", "omap_hsmmc.0"),
 };
 /* VMMC1 for MMC1 pins CMD, CLK, DAT0..DAT3 (20 mA, plus card == max 220 mA) */
@@ -224,8 +223,8 @@ static struct regulator_init_data omap3stalker_vmmc1 = {
 		.valid_ops_mask		= REGULATOR_CHANGE_VOLTAGE
 		| REGULATOR_CHANGE_MODE | REGULATOR_CHANGE_STATUS,
 	},
-	.num_consumer_supplies	= 1,
+	.num_consumer_supplies	= ARRAY_SIZE(omap3stalker_vmmc1_supply),
-	.consumer_supplies	= &omap3stalker_vmmc1_supply,
+	.consumer_supplies	= omap3stalker_vmmc1_supply,
 };
 /* VSIM for MMC1 pins DAT4..DAT7 (2 mA, plus card == max 50 mA) */
@@ -238,8 +237,8 @@ static struct regulator_init_data omap3stalker_vsim = {
 		.valid_ops_mask		= REGULATOR_CHANGE_VOLTAGE
 		| REGULATOR_CHANGE_MODE | REGULATOR_CHANGE_STATUS,
 	},
-	.num_consumer_supplies	= 1,
+	.num_consumer_supplies	= ARRAY_SIZE(omap3stalker_vsim_supply),
-	.consumer_supplies	= &omap3stalker_vsim_supply,
+	.consumer_supplies	= omap3stalker_vsim_supply,
 };
 static struct omap2_hsmmc_info mmc[] = {
@@ -321,10 +320,6 @@ omap3stalker_twl_gpio_setup(struct device *dev,
 	mmc[0].gpio_cd = gpio + 0;
 	omap2_hsmmc_init(mmc);
-	/* link regulators to MMC adapters */
-	omap3stalker_vmmc1_supply.dev = mmc[0].dev;
-	omap3stalker_vsim_supply.dev = mmc[0].dev;
 	/*
 	 * Most GPIOs are for USB OTG.  Some are mostly sent to
 	 * the P2 connector; notably LEDA for the LCD backlight.
@@ -354,10 +349,6 @@ static struct twl4030_gpio_platform_data omap3stalker_gpio_data = {
 	.setup		= omap3stalker_twl_gpio_setup,
 };
-static struct twl4030_usb_data omap3stalker_usb_data = {
-	.usb_mode	= T2_USB_MODE_ULPI,
-};
 static uint32_t board_keymap[] = {
 	KEY(0, 0, KEY_LEFT),
 	KEY(0, 1, KEY_DOWN),
@@ -392,68 +383,10 @@ static struct twl4030_keypad_data omap3stalker_kp_data = {
 	.rep		= 1,
 };
-static struct twl4030_madc_platform_data omap3stalker_madc_data = {
-	.irq_line	= 1,
-};
-static struct twl4030_codec_audio_data omap3stalker_audio_data;
-static struct twl4030_codec_data omap3stalker_codec_data = {
-	.audio_mclk	= 26000000,
-	.audio		= &omap3stalker_audio_data,
-};
-static struct regulator_consumer_supply omap3_stalker_vdda_dac_supply =
-	REGULATOR_SUPPLY("vdda_dac", "omapdss_venc");
-/* VDAC for DSS driving S-Video */
-static struct regulator_init_data omap3_stalker_vdac = {
-	.constraints		= {
-		.min_uV			= 1800000,
-		.max_uV			= 1800000,
-		.apply_uV		= true,
-		.valid_modes_mask	= REGULATOR_MODE_NORMAL
-		| REGULATOR_MODE_STANDBY,
-		.valid_ops_mask		= REGULATOR_CHANGE_MODE
-		| REGULATOR_CHANGE_STATUS,
-	},
-	.num_consumer_supplies	= 1,
-	.consumer_supplies	= &omap3_stalker_vdda_dac_supply,
-};
-/* VPLL2 for digital video outputs */
-static struct regulator_consumer_supply omap3_stalker_vpll2_supplies[] = {
-	REGULATOR_SUPPLY("vdds_dsi", "omapdss"),
-	REGULATOR_SUPPLY("vdds_dsi", "omapdss_dsi1"),
-};
-static struct regulator_init_data omap3_stalker_vpll2 = {
-	.constraints		= {
-		.name			= "VDVI",
-		.min_uV			= 1800000,
-		.max_uV			= 1800000,
-		.apply_uV = true,
-		.valid_modes_mask	= REGULATOR_MODE_NORMAL
-		| REGULATOR_MODE_STANDBY,
-		.valid_ops_mask		= REGULATOR_CHANGE_MODE
-		| REGULATOR_CHANGE_STATUS,
-	},
-	.num_consumer_supplies	= ARRAY_SIZE(omap3_stalker_vpll2_supplies),
-	.consumer_supplies	= omap3_stalker_vpll2_supplies,
-};
 static struct twl4030_platform_data omap3stalker_twldata = {
-	.irq_base	= TWL4030_IRQ_BASE,
-	.irq_end	= TWL4030_IRQ_END,
 	/* platform_data for children goes here */
 	.keypad		= &omap3stalker_kp_data,
-	.madc		= &omap3stalker_madc_data,
-	.usb		= &omap3stalker_usb_data,
 	.gpio		= &omap3stalker_gpio_data,
-	.codec		= &omap3stalker_codec_data,
-	.vdac		= &omap3_stalker_vdac,
-	.vpll2		= &omap3_stalker_vpll2,
 	.vmmc1		= &omap3stalker_vmmc1,
 	.vsim		= &omap3stalker_vsim,
 };
@@ -474,6 +407,15 @@ static struct i2c_board_info __initdata omap3stalker_i2c_boardinfo3[] = {
 static int __init omap3_stalker_i2c_init(void)
 {
+	omap3_pmic_get_config(&omap3stalker_twldata,
+			TWL_COMMON_PDATA_USB | TWL_COMMON_PDATA_MADC |
+			TWL_COMMON_PDATA_AUDIO,
+			TWL_COMMON_REGULATOR_VDAC | TWL_COMMON_REGULATOR_VPLL2);
+	omap3stalker_twldata.vdac->constraints.apply_uV = true;
+	omap3stalker_twldata.vpll2->constraints.apply_uV = true;
+	omap3stalker_twldata.vpll2->constraints.name = "VDVI";
 	omap3_pmic_init("twl4030", &omap3stalker_twldata);
 	omap_register_i2c_bus(2, 400, NULL, 0);
 	omap_register_i2c_bus(3, 400, omap3stalker_i2c_boardinfo3,
@@ -494,10 +436,7 @@ static void __init omap3_stalker_init_early(void)
 static void __init omap3_stalker_init_irq(void)
 {
-	omap_init_irq();
+	omap3_init_irq();
-#ifdef CONFIG_OMAP_32K_TIMER
-	omap2_gp_clockevent_set_gptimer(12);
-#endif
 }
 static struct platform_device *omap3_stalker_devices[] __initdata = {
@@ -560,5 +499,5 @@ MACHINE_START(SBC3530, "OMAP3 STALKER")
 	.init_early		= omap3_stalker_init_early,
 	.init_irq		= omap3_stalker_init_irq,
 	.init_machine		= omap3_stalker_init,
-	.timer			= &omap_timer,
+	.timer			= &omap3_secure_timer,
 MACHINE_END
--- a/arch/arm/mach-omap2/board-omap3touchbook.c
+++ b/arch/arm/mach-omap2/board-omap3touchbook.c
@@ -51,7 +51,6 @@
 #include "mux.h"
 #include "hsmmc.h"
-#include "timer-gp.h"
 #include "common-board-devices.h"
 #include <asm/setup.h>
@@ -114,12 +113,12 @@ static struct omap_lcd_config omap3_touchbook_lcd_config __initdata = {
 	.ctrl_name	= "internal",
 };
-static struct regulator_consumer_supply touchbook_vmmc1_supply = {
+static struct regulator_consumer_supply touchbook_vmmc1_supply[] = {
-	.supply			= "vmmc",
+	REGULATOR_SUPPLY("vmmc", "omap_hsmmc.0"),
 };
-static struct regulator_consumer_supply touchbook_vsim_supply = {
+static struct regulator_consumer_supply touchbook_vsim_supply[] = {
-	.supply			= "vmmc_aux",
+	REGULATOR_SUPPLY("vmmc_aux", "omap_hsmmc.0"),
 };
 static struct gpio_led gpio_leds[];
@@ -137,10 +136,6 @@ static int touchbook_twl_gpio_setup(struct device *dev,
 	mmc[0].gpio_cd = gpio + 0;
 	omap2_hsmmc_init(mmc);
-	/* link regulators to MMC adapters */
-	touchbook_vmmc1_supply.dev = mmc[0].dev;
-	touchbook_vsim_supply.dev = mmc[0].dev;
 	/* REVISIT: need ehci-omap hooks for external VBUS
 	 * power switch and overcurrent detect
 	 */
@@ -167,14 +162,18 @@ static struct twl4030_gpio_platform_data touchbook_gpio_data = {
 	.setup		= touchbook_twl_gpio_setup,
 };
-static struct regulator_consumer_supply touchbook_vdac_supply = {
+static struct regulator_consumer_supply touchbook_vdac_supply[] = {
+{
 	.supply		= "vdac",
 	.dev		= &omap3_touchbook_lcd_device.dev,
+},
 };
-static struct regulator_consumer_supply touchbook_vdvi_supply = {
+static struct regulator_consumer_supply touchbook_vdvi_supply[] = {
+{
 	.supply		= "vdvi",
 	.dev		= &omap3_touchbook_lcd_device.dev,
+},
 };
 /* VMMC1 for MMC1 pins CMD, CLK, DAT0..DAT3 (20 mA, plus card == max 220 mA) */
@@ -188,8 +187,8 @@ static struct regulator_init_data touchbook_vmmc1 = {
 					| REGULATOR_CHANGE_MODE
 					| REGULATOR_CHANGE_STATUS,
 	},
-	.num_consumer_supplies	= 1,
+	.num_consumer_supplies	= ARRAY_SIZE(touchbook_vmmc1_supply),
-	.consumer_supplies	= &touchbook_vmmc1_supply,
+	.consumer_supplies	= touchbook_vmmc1_supply,
 };
 /* VSIM for MMC1 pins DAT4..DAT7 (2 mA, plus card == max 50 mA) */
@@ -203,62 +202,15 @@ static struct regulator_init_data touchbook_vsim = {
 					| REGULATOR_CHANGE_MODE
 					| REGULATOR_CHANGE_STATUS,
 	},
-	.num_consumer_supplies	= 1,
+	.num_consumer_supplies	= ARRAY_SIZE(touchbook_vsim_supply),
-	.consumer_supplies	= &touchbook_vsim_supply,
+	.consumer_supplies	= touchbook_vsim_supply,
-};
-/* VDAC for DSS driving S-Video (8 mA unloaded, max 65 mA) */
-static struct regulator_init_data touchbook_vdac = {
-	.constraints = {
-		.min_uV			= 1800000,
-		.max_uV			= 1800000,
-		.valid_modes_mask	= REGULATOR_MODE_NORMAL
-					| REGULATOR_MODE_STANDBY,
-		.valid_ops_mask		= REGULATOR_CHANGE_MODE
-					| REGULATOR_CHANGE_STATUS,
-	},
-	.num_consumer_supplies	= 1,
-	.consumer_supplies	= &touchbook_vdac_supply,
-};
-/* VPLL2 for digital video outputs */
-static struct regulator_init_data touchbook_vpll2 = {
-	.constraints = {
-		.name			= "VDVI",
-		.min_uV			= 1800000,
-		.max_uV			= 1800000,
-		.valid_modes_mask	= REGULATOR_MODE_NORMAL
-					| REGULATOR_MODE_STANDBY,
-		.valid_ops_mask		= REGULATOR_CHANGE_MODE
-					| REGULATOR_CHANGE_STATUS,
-	},
-	.num_consumer_supplies	= 1,
-	.consumer_supplies	= &touchbook_vdvi_supply,
-};
-static struct twl4030_usb_data touchbook_usb_data = {
-	.usb_mode	= T2_USB_MODE_ULPI,
-};
-static struct twl4030_codec_audio_data touchbook_audio_data;
-static struct twl4030_codec_data touchbook_codec_data = {
-	.audio_mclk = 26000000,
-	.audio = &touchbook_audio_data,
 };
 static struct twl4030_platform_data touchbook_twldata = {
-	.irq_base	= TWL4030_IRQ_BASE,
-	.irq_end	= TWL4030_IRQ_END,
 	/* platform_data for children goes here */
-	.usb		= &touchbook_usb_data,
 	.gpio		= &touchbook_gpio_data,
-	.codec		= &touchbook_codec_data,
 	.vmmc1		= &touchbook_vmmc1,
 	.vsim		= &touchbook_vsim,
-	.vdac		= &touchbook_vdac,
-	.vpll2		= &touchbook_vpll2,
 };
 static struct i2c_board_info __initdata touchBook_i2c_boardinfo[] = {
@@ -270,8 +222,20 @@ static struct i2c_board_info __initdata touchBook_i2c_boardinfo[] = {
 static int __init omap3_touchbook_i2c_init(void)
 {
 	/* Standard TouchBook bus */
-	omap3_pmic_init("twl4030", &touchbook_twldata);
+	omap3_pmic_get_config(&touchbook_twldata,
+			TWL_COMMON_PDATA_USB | TWL_COMMON_PDATA_AUDIO,
+			TWL_COMMON_REGULATOR_VDAC | TWL_COMMON_REGULATOR_VPLL2);
+	touchbook_twldata.vdac->num_consumer_supplies =
+					ARRAY_SIZE(touchbook_vdac_supply);
+	touchbook_twldata.vdac->consumer_supplies = touchbook_vdac_supply;
+	touchbook_twldata.vpll2->constraints.name = "VDVI";
+	touchbook_twldata.vpll2->num_consumer_supplies =
+					ARRAY_SIZE(touchbook_vdvi_supply);
+	touchbook_twldata.vpll2->consumer_supplies = touchbook_vdvi_supply;
+	omap3_pmic_init("twl4030", &touchbook_twldata);
 	/* Additional TouchBook bus */
 	omap_register_i2c_bus(3, 100, touchBook_i2c_boardinfo,
 			ARRAY_SIZE(touchBook_i2c_boardinfo));
@@ -371,10 +335,7 @@ static void __init omap3_touchbook_init_early(void)
 static void __init omap3_touchbook_init_irq(void)
 {
-	omap_init_irq();
+	omap3_init_irq();
-#ifdef CONFIG_OMAP_32K_TIMER
-	omap2_gp_clockevent_set_gptimer(12);
-#endif
 }
 static struct platform_device *omap3_touchbook_devices[] __initdata = {
@@ -449,5 +410,5 @@ MACHINE_START(TOUCHBOOK, "OMAP3 touchbook Board")
 	.init_early	= omap3_touchbook_init_early,
 	.init_irq	= omap3_touchbook_init_irq,
 	.init_machine	= omap3_touchbook_init,
-	.timer		= &omap_timer,
+	.timer		= &omap3_secure_timer,
 MACHINE_END
--- a/arch/arm/mach-omap2/board-omap4panda.c
+++ b/arch/arm/mach-omap2/board-omap4panda.c
@@ -41,7 +41,6 @@
 #include <plat/usb.h>
 #include <plat/mmc.h>
 #include <video/omap-panel-generic-dpi.h>
-#include "timer-gp.h"
 #include "hsmmc.h"
 #include "control.h"
@@ -155,14 +154,6 @@ static struct omap_musb_board_data musb_board_data = {
 	.power			= 100,
 };
-static struct twl4030_usb_data omap4_usbphy_data = {
-	.phy_init	= omap4430_phy_init,
-	.phy_exit	= omap4430_phy_exit,
-	.phy_power	= omap4430_phy_power,
-	.phy_set_clock	= omap4430_phy_set_clk,
-	.phy_suspend	= omap4430_phy_suspend,
-};
 static struct omap2_hsmmc_info mmc[] = {
 	{
 		.mmc		= 1,
@@ -182,24 +173,16 @@ static struct omap2_hsmmc_info mmc[] = {
 	{}	/* Terminator */
 };
-static struct regulator_consumer_supply omap4_panda_vmmc_supply[] = {
+static struct regulator_consumer_supply omap4_panda_vmmc5_supply[] = {
-	{
+	REGULATOR_SUPPLY("vmmc", "omap_hsmmc.4"),
-		.supply = "vmmc",
-		.dev_name = "omap_hsmmc.0",
-	},
-};
-static struct regulator_consumer_supply omap4_panda_vmmc5_supply = {
-	.supply = "vmmc",
-	.dev_name = "omap_hsmmc.4",
 };
 static struct regulator_init_data panda_vmmc5 = {
 	.constraints = {
 		.valid_ops_mask = REGULATOR_CHANGE_STATUS,
 	},
-	.num_consumer_supplies = 1,
+	.num_consumer_supplies = ARRAY_SIZE(omap4_panda_vmmc5_supply),
-	.consumer_supplies = &omap4_panda_vmmc5_supply,
+	.consumer_supplies = omap4_panda_vmmc5_supply,
 };
 static struct fixed_voltage_config panda_vwlan = {
@@ -274,128 +257,8 @@ static int __init omap4_twl6030_hsmmc_init(struct omap2_hsmmc_info *controllers)
 	return 0;
 }
-static struct regulator_init_data omap4_panda_vaux2 = {
+/* Panda board uses the common PMIC configuration */
-	.constraints = {
+static struct twl4030_platform_data omap4_panda_twldata;
-		.min_uV			= 1200000,
-		.max_uV			= 2800000,
-		.apply_uV		= true,
-		.valid_modes_mask	= REGULATOR_MODE_NORMAL
-					| REGULATOR_MODE_STANDBY,
-		.valid_ops_mask	 = REGULATOR_CHANGE_VOLTAGE
-					| REGULATOR_CHANGE_MODE
-					| REGULATOR_CHANGE_STATUS,
-	},
-};
-static struct regulator_init_data omap4_panda_vaux3 = {
-	.constraints = {
-		.min_uV			= 1000000,
-		.max_uV			= 3000000,
-		.apply_uV		= true,
-		.valid_modes_mask	= REGULATOR_MODE_NORMAL
-					| REGULATOR_MODE_STANDBY,
-		.valid_ops_mask	 = REGULATOR_CHANGE_VOLTAGE
-					| REGULATOR_CHANGE_MODE
-					| REGULATOR_CHANGE_STATUS,
-	},
-};
-/* VMMC1 for MMC1 card */
-static struct regulator_init_data omap4_panda_vmmc = {
-	.constraints = {
-		.min_uV			= 1200000,
-		.max_uV			= 3000000,
-		.apply_uV		= true,
-		.valid_modes_mask	= REGULATOR_MODE_NORMAL
-					| REGULATOR_MODE_STANDBY,
-		.valid_ops_mask	 = REGULATOR_CHANGE_VOLTAGE
-					| REGULATOR_CHANGE_MODE
-					| REGULATOR_CHANGE_STATUS,
-	},
-	.num_consumer_supplies  = 1,
-	.consumer_supplies      = omap4_panda_vmmc_supply,
-};
-static struct regulator_init_data omap4_panda_vpp = {
-	.constraints = {
-		.min_uV			= 1800000,
-		.max_uV			= 2500000,
-		.apply_uV		= true,
-		.valid_modes_mask	= REGULATOR_MODE_NORMAL
-					| REGULATOR_MODE_STANDBY,
-		.valid_ops_mask	 = REGULATOR_CHANGE_VOLTAGE
-					| REGULATOR_CHANGE_MODE
-					| REGULATOR_CHANGE_STATUS,
-	},
-};
-static struct regulator_init_data omap4_panda_vana = {
-	.constraints = {
-		.min_uV			= 2100000,
-		.max_uV			= 2100000,
-		.valid_modes_mask	= REGULATOR_MODE_NORMAL
-					| REGULATOR_MODE_STANDBY,
-		.valid_ops_mask	 = REGULATOR_CHANGE_MODE
-					| REGULATOR_CHANGE_STATUS,
-	},
-};
-static struct regulator_init_data omap4_panda_vcxio = {
-	.constraints = {
-		.min_uV			= 1800000,
-		.max_uV			= 1800000,
-		.valid_modes_mask	= REGULATOR_MODE_NORMAL
-					| REGULATOR_MODE_STANDBY,
-		.valid_ops_mask	 = REGULATOR_CHANGE_MODE
-					| REGULATOR_CHANGE_STATUS,
-	},
-};
-static struct regulator_init_data omap4_panda_vdac = {
-	.constraints = {
-		.min_uV			= 1800000,
-		.max_uV			= 1800000,
-		.valid_modes_mask	= REGULATOR_MODE_NORMAL
-					| REGULATOR_MODE_STANDBY,
-		.valid_ops_mask	 = REGULATOR_CHANGE_MODE
-					| REGULATOR_CHANGE_STATUS,
-	},
-};
-static struct regulator_init_data omap4_panda_vusb = {
-	.constraints = {
-		.min_uV			= 3300000,
-		.max_uV			= 3300000,
-		.apply_uV		= true,
-		.valid_modes_mask	= REGULATOR_MODE_NORMAL
-					| REGULATOR_MODE_STANDBY,
-		.valid_ops_mask	 =	REGULATOR_CHANGE_MODE
-					| REGULATOR_CHANGE_STATUS,
-	},
-};
-static struct regulator_init_data omap4_panda_clk32kg = {
-	.constraints = {
-		.valid_ops_mask		= REGULATOR_CHANGE_STATUS,
-	},
-};
-static struct twl4030_platform_data omap4_panda_twldata = {
-	.irq_base	= TWL6030_IRQ_BASE,
-	.irq_end	= TWL6030_IRQ_END,
-	/* Regulators */
-	.vmmc		= &omap4_panda_vmmc,
-	.vpp		= &omap4_panda_vpp,
-	.vana		= &omap4_panda_vana,
-	.vcxio		= &omap4_panda_vcxio,
-	.vdac		= &omap4_panda_vdac,
-	.vusb		= &omap4_panda_vusb,
-	.vaux2		= &omap4_panda_vaux2,
-	.vaux3		= &omap4_panda_vaux3,
-	.clk32kg	= &omap4_panda_clk32kg,
-	.usb		= &omap4_usbphy_data,
-};
 /*
 * Display monitor features are burnt in their EEPROM as EDID data. The EEPROM
@@ -409,6 +272,16 @@ static struct i2c_board_info __initdata panda_i2c_eeprom[] = {
 static int __init omap4_panda_i2c_init(void)
 {
+	omap4_pmic_get_config(&omap4_panda_twldata, TWL_COMMON_PDATA_USB,
+			TWL_COMMON_REGULATOR_VDAC |
+			TWL_COMMON_REGULATOR_VAUX2 |
+			TWL_COMMON_REGULATOR_VAUX3 |
+			TWL_COMMON_REGULATOR_VMMC |
+			TWL_COMMON_REGULATOR_VPP |
+			TWL_COMMON_REGULATOR_VANA |
+			TWL_COMMON_REGULATOR_VCXIO |
+			TWL_COMMON_REGULATOR_VUSB |
+			TWL_COMMON_REGULATOR_CLK32KG);
 	omap4_pmic_init("twl6030", &omap4_panda_twldata);
 	omap_register_i2c_bus(2, 400, NULL, 0);
 	/*
@@ -716,5 +589,5 @@ MACHINE_START(OMAP4_PANDA, "OMAP4 Panda board")
 	.init_early	= omap4_panda_init_early,
 	.init_irq	= gic_init_irq,
 	.init_machine	= omap4_panda_init,
-	.timer		= &omap_timer,
+	.timer		= &omap4_timer,
 MACHINE_END
--- a/arch/arm/mach-omap2/board-overo.c
+++ b/arch/arm/mach-omap2/board-overo.c
@@ -74,15 +74,16 @@
 	defined(CONFIG_TOUCHSCREEN_ADS7846_MODULE)
 /* fixed regulator for ads7846 */
-static struct regulator_consumer_supply ads7846_supply =
+static struct regulator_consumer_supply ads7846_supply[] = {
-	REGULATOR_SUPPLY("vcc", "spi1.0");
+	REGULATOR_SUPPLY("vcc", "spi1.0"),
+};
 static struct regulator_init_data vads7846_regulator = {
 	.constraints = {
 		.valid_ops_mask		= REGULATOR_CHANGE_STATUS,
 	},
-	.num_consumer_supplies	= 1,
+	.num_consumer_supplies	= ARRAY_SIZE(ads7846_supply),
-	.consumer_supplies	= &ads7846_supply,
+	.consumer_supplies	= ads7846_supply,
 };
 static struct fixed_voltage_config vads7846 = {
@@ -264,14 +265,6 @@ static struct omap_dss_board_info overo_dss_data = {
 	.default_device	= &overo_dvi_device,
 };
-static struct regulator_consumer_supply overo_vdda_dac_supply =
-	REGULATOR_SUPPLY("vdda_dac", "omapdss_venc");
-static struct regulator_consumer_supply overo_vdds_dsi_supply[] = {
-	REGULATOR_SUPPLY("vdds_dsi", "omapdss"),
-	REGULATOR_SUPPLY("vdds_dsi", "omapdss_dsi1"),
-};
 static struct mtd_partition overo_nand_partitions[] = {
 	{
 		.name           = "xloader",
@@ -319,8 +312,8 @@ static struct omap2_hsmmc_info mmc[] = {
 	{}	/* Terminator */
 };
-static struct regulator_consumer_supply overo_vmmc1_supply = {
+static struct regulator_consumer_supply overo_vmmc1_supply[] = {
-	.supply			= "vmmc",
+	REGULATOR_SUPPLY("vmmc", "omap_hsmmc.0"),
 };
 #if defined(CONFIG_LEDS_GPIO) || defined(CONFIG_LEDS_GPIO_MODULE)
@@ -415,8 +408,6 @@ static int overo_twl_gpio_setup(struct device *dev,
 {
 	omap2_hsmmc_init(mmc);
-	overo_vmmc1_supply.dev = mmc[0].dev;
 #if defined(CONFIG_LEDS_GPIO) || defined(CONFIG_LEDS_GPIO_MODULE)
 	/* TWL4030_GPIO_MAX + 1 == ledB, PMU_STAT (out, active low LED) */
 	gpio_leds[2].gpio = gpio + TWL4030_GPIO_MAX + 1;
@@ -433,10 +424,6 @@ static struct twl4030_gpio_platform_data overo_gpio_data = {
 	.setup		= overo_twl_gpio_setup,
 };
-static struct twl4030_usb_data overo_usb_data = {
-	.usb_mode	= T2_USB_MODE_ULPI,
-};
 static struct regulator_init_data overo_vmmc1 = {
 	.constraints = {
 		.min_uV			= 1850000,
@@ -447,59 +434,23 @@ static struct regulator_init_data overo_vmmc1 = {
 					| REGULATOR_CHANGE_MODE
 					| REGULATOR_CHANGE_STATUS,
 	},
-	.num_consumer_supplies	= 1,
+	.num_consumer_supplies	= ARRAY_SIZE(overo_vmmc1_supply),
-	.consumer_supplies	= &overo_vmmc1_supply,
+	.consumer_supplies	= overo_vmmc1_supply,
-};
-/* VDAC for DSS driving S-Video (8 mA unloaded, max 65 mA) */
-static struct regulator_init_data overo_vdac = {
-	.constraints = {
-		.min_uV			= 1800000,
-		.max_uV			= 1800000,
-		.valid_modes_mask	= REGULATOR_MODE_NORMAL
-					| REGULATOR_MODE_STANDBY,
-		.valid_ops_mask		= REGULATOR_CHANGE_MODE
-					| REGULATOR_CHANGE_STATUS,
-	},
-	.num_consumer_supplies	= 1,
-	.consumer_supplies	= &overo_vdda_dac_supply,
-};
-/* VPLL2 for digital video outputs */
-static struct regulator_init_data overo_vpll2 = {
-	.constraints = {
-		.name			= "VDVI",
-		.min_uV			= 1800000,
-		.max_uV			= 1800000,
-		.valid_modes_mask	= REGULATOR_MODE_NORMAL
-					| REGULATOR_MODE_STANDBY,
-		.valid_ops_mask		= REGULATOR_CHANGE_MODE
-					| REGULATOR_CHANGE_STATUS,
-	},
-	.num_consumer_supplies	= ARRAY_SIZE(overo_vdds_dsi_supply),
-	.consumer_supplies	= overo_vdds_dsi_supply,
-};
-static struct twl4030_codec_audio_data overo_audio_data;
-static struct twl4030_codec_data overo_codec_data = {
-	.audio_mclk = 26000000,
-	.audio = &overo_audio_data,
 };
 static struct twl4030_platform_data overo_twldata = {
-	.irq_base	= TWL4030_IRQ_BASE,
-	.irq_end	= TWL4030_IRQ_END,
 	.gpio		= &overo_gpio_data,
-	.usb		= &overo_usb_data,
-	.codec		= &overo_codec_data,
 	.vmmc1		= &overo_vmmc1,
-	.vdac		= &overo_vdac,
-	.vpll2		= &overo_vpll2,
 };
 static int __init overo_i2c_init(void)
 {
+	omap3_pmic_get_config(&overo_twldata,
+			TWL_COMMON_PDATA_USB | TWL_COMMON_PDATA_AUDIO,
+			TWL_COMMON_REGULATOR_VDAC | TWL_COMMON_REGULATOR_VPLL2);
+	overo_twldata.vpll2->constraints.name = "VDVI";
 	omap3_pmic_init("tps65950", &overo_twldata);
 	/* i2c2 pins are used for gpio */
 	omap_register_i2c_bus(3, 400, NULL, 0);
@@ -615,7 +566,7 @@ MACHINE_START(OVERO, "Gumstix Overo")
 	.reserve	= omap_reserve,
 	.map_io		= omap3_map_io,
 	.init_early	= overo_init_early,
-	.init_irq	= omap_init_irq,
+	.init_irq	= omap3_init_irq,
 	.init_machine	= overo_init,
-	.timer		= &omap_timer,
+	.timer		= &omap3_timer,
 MACHINE_END
--- a/arch/arm/mach-omap2/board-rm680.c
+++ b/arch/arm/mach-omap2/board-rm680.c
@@ -79,20 +79,14 @@ static struct twl4030_gpio_platform_data rm680_gpio_data = {
 	.pulldowns		= BIT(1) | BIT(2) | BIT(8) | BIT(15),
 };
-static struct twl4030_usb_data rm680_usb_data = {
-	.usb_mode		= T2_USB_MODE_ULPI,
-};
 static struct twl4030_platform_data rm680_twl_data = {
-	.irq_base		= TWL4030_IRQ_BASE,
-	.irq_end		= TWL4030_IRQ_END,
 	.gpio			= &rm680_gpio_data,
-	.usb			= &rm680_usb_data,
 	/* add rest of the children here */
 };
 static void __init rm680_i2c_init(void)
 {
+	omap3_pmic_get_config(&rm680_twl_data, TWL_COMMON_PDATA_USB, 0);
 	omap_pmic_init(1, 2900, "twl5031", INT_34XX_SYS_NIRQ, &rm680_twl_data);
 	omap_register_i2c_bus(2, 400, NULL, 0);
 	omap_register_i2c_bus(3, 400, NULL, 0);
@@ -163,7 +157,7 @@ MACHINE_START(NOKIA_RM680, "Nokia RM-680 board")
 	.reserve	= omap_reserve,
 	.map_io		= rm680_map_io,
 	.init_early	= rm680_init_early,
-	.init_irq	= omap_init_irq,
+	.init_irq	= omap3_init_irq,
 	.init_machine	= rm680_init,
-	.timer		= &omap_timer,
+	.timer		= &omap3_timer,
 MACHINE_END
--- a/arch/arm/mach-omap2/board-rx51-peripherals.c
+++ b/arch/arm/mach-omap2/board-rx51-peripherals.c
@@ -288,10 +288,6 @@ static struct twl4030_keypad_data rx51_kp_data = {
 	.rep		= 1,
 };
-static struct twl4030_madc_platform_data rx51_madc_data = {
-	.irq_line		= 1,
-};
 /* Enable input logic and pull all lines up when eMMC is on. */
 static struct omap_board_mux rx51_mmc2_on_mux[] = {
 	OMAP3_MUX(SDMMC2_CMD, OMAP_PIN_INPUT_PULLUP | OMAP_MUX_MODE0),
@@ -358,14 +354,17 @@ static struct omap2_hsmmc_info mmc[] __initdata = {
 	{}	/* Terminator */
 };
-static struct regulator_consumer_supply rx51_vmmc1_supply =
+static struct regulator_consumer_supply rx51_vmmc1_supply[] = {
-	REGULATOR_SUPPLY("vmmc", "omap_hsmmc.0");
+	REGULATOR_SUPPLY("vmmc", "omap_hsmmc.0"),
+};
-static struct regulator_consumer_supply rx51_vaux3_supply =
+static struct regulator_consumer_supply rx51_vaux3_supply[] = {
-	REGULATOR_SUPPLY("vmmc", "omap_hsmmc.1");
+	REGULATOR_SUPPLY("vmmc", "omap_hsmmc.1"),
+};
-static struct regulator_consumer_supply rx51_vsim_supply =
+static struct regulator_consumer_supply rx51_vsim_supply[] = {
-	REGULATOR_SUPPLY("vmmc_aux", "omap_hsmmc.1");
+	REGULATOR_SUPPLY("vmmc_aux", "omap_hsmmc.1"),
+};
 static struct regulator_consumer_supply rx51_vmmc2_supplies[] = {
 	/* tlv320aic3x analog supplies */
@@ -395,10 +394,6 @@ static struct regulator_consumer_supply rx51_vaux1_consumers[] = {
 	REGULATOR_SUPPLY("vdd", "2-0063"),
 };
-static struct regulator_consumer_supply rx51_vdac_supply[] = {
-	REGULATOR_SUPPLY("vdda_dac", "omapdss_venc"),
-};
 static struct regulator_init_data rx51_vaux1 = {
 	.constraints = {
 		.name			= "V28",
@@ -452,8 +447,8 @@ static struct regulator_init_data rx51_vaux3_mmc = {
 					| REGULATOR_CHANGE_MODE
 					| REGULATOR_CHANGE_STATUS,
 	},
-	.num_consumer_supplies	= 1,
+	.num_consumer_supplies	= ARRAY_SIZE(rx51_vaux3_supply),
-	.consumer_supplies	= &rx51_vaux3_supply,
+	.consumer_supplies	= rx51_vaux3_supply,
 };
 static struct regulator_init_data rx51_vaux4 = {
@@ -479,8 +474,8 @@ static struct regulator_init_data rx51_vmmc1 = {
 					| REGULATOR_CHANGE_MODE
 					| REGULATOR_CHANGE_STATUS,
 	},
-	.num_consumer_supplies	= 1,
+	.num_consumer_supplies	= ARRAY_SIZE(rx51_vmmc1_supply),
-	.consumer_supplies	= &rx51_vmmc1_supply,
+	.consumer_supplies	= rx51_vmmc1_supply,
 };
 static struct regulator_init_data rx51_vmmc2 = {
@@ -511,23 +506,8 @@ static struct regulator_init_data rx51_vsim = {
 		.valid_ops_mask		= REGULATOR_CHANGE_MODE
 					| REGULATOR_CHANGE_STATUS,
 	},
-	.num_consumer_supplies	= 1,
+	.num_consumer_supplies	= ARRAY_SIZE(rx51_vsim_supply),
-	.consumer_supplies	= &rx51_vsim_supply,
+	.consumer_supplies	= rx51_vsim_supply,
-};
-static struct regulator_init_data rx51_vdac = {
-	.constraints = {
-		.name			= "VDAC",
-		.min_uV			= 1800000,
-		.max_uV			= 1800000,
-		.apply_uV		= true,
-		.valid_modes_mask	= REGULATOR_MODE_NORMAL
-					| REGULATOR_MODE_STANDBY,
-		.valid_ops_mask		= REGULATOR_CHANGE_MODE
-					| REGULATOR_CHANGE_STATUS,
-	},
-	.num_consumer_supplies	= 1,
-	.consumer_supplies	= rx51_vdac_supply,
 };
 static struct regulator_init_data rx51_vio = {
@@ -600,10 +580,6 @@ static struct twl4030_gpio_platform_data rx51_gpio_data = {
 	.setup			= rx51_twlgpio_setup,
 };
-static struct twl4030_usb_data rx51_usb_data = {
-	.usb_mode		= T2_USB_MODE_ULPI,
-};
 static struct twl4030_ins sleep_on_seq[] __initdata = {
 /*
 * Turn off everything
@@ -765,33 +741,27 @@ static struct twl4030_power_data rx51_t2scripts_data __initdata = {
 	.resource_config = twl4030_rconfig,
 };
-struct twl4030_codec_vibra_data rx51_vibra_data __initdata = {
+struct twl4030_vibra_data rx51_vibra_data __initdata = {
 	.coexist	= 0,
 };
-struct twl4030_codec_data rx51_codec_data __initdata = {
+struct twl4030_audio_data rx51_audio_data __initdata = {
 	.audio_mclk	= 26000000,
 	.vibra		= &rx51_vibra_data,
 };
 static struct twl4030_platform_data rx51_twldata __initdata = {
-	.irq_base		= TWL4030_IRQ_BASE,
-	.irq_end		= TWL4030_IRQ_END,
 	/* platform_data for children goes here */
 	.gpio			= &rx51_gpio_data,
 	.keypad			= &rx51_kp_data,
-	.madc			= &rx51_madc_data,
-	.usb			= &rx51_usb_data,
 	.power			= &rx51_t2scripts_data,
-	.codec			= &rx51_codec_data,
+	.audio			= &rx51_audio_data,
 	.vaux1			= &rx51_vaux1,
 	.vaux2			= &rx51_vaux2,
 	.vaux4			= &rx51_vaux4,
 	.vmmc1			= &rx51_vmmc1,
 	.vsim			= &rx51_vsim,
-	.vdac			= &rx51_vdac,
 	.vio			= &rx51_vio,
 };
@@ -847,6 +817,13 @@ static int __init rx51_i2c_init(void)
 		rx51_twldata.vaux3 = &rx51_vaux3_cam;
 	}
 	rx51_twldata.vmmc2 = &rx51_vmmc2;
+	omap3_pmic_get_config(&rx51_twldata,
+			TWL_COMMON_PDATA_USB | TWL_COMMON_PDATA_MADC,
+			TWL_COMMON_REGULATOR_VDAC);
+	rx51_twldata.vdac->constraints.apply_uV = true;
+	rx51_twldata.vdac->constraints.name = "VDAC";
 	omap_pmic_init(1, 2200, "twl5030", INT_34XX_SYS_NIRQ, &rx51_twldata);
 	omap_register_i2c_bus(2, 100, rx51_peripherals_i2c_board_info_2,
 			      ARRAY_SIZE(rx51_peripherals_i2c_board_info_2));

--- a/arch/arm/mach-omap2/board-rx51.c
+++ b/arch/arm/mach-omap2/board-rx51.c
@@ -160,7 +160,7 @@ MACHINE_START(NOKIA_RX51, "Nokia RX-51 board")
 	.reserve	= rx51_reserve,
 	.map_io		= rx51_map_io,
 	.init_early	= rx51_init_early,
-	.init_irq	= omap_init_irq,
+	.init_irq	= omap3_init_irq,
 	.init_machine	= rx51_init,
-	.timer		= &omap_timer,
+	.timer		= &omap3_timer,
 MACHINE_END
--- a/arch/arm/mach-omap2/board-ti8168evm.c
+++ b/arch/arm/mach-omap2/board-ti8168evm.c
@@ -33,11 +33,6 @@ static void __init ti8168_init_early(void)
 	omap2_init_common_devices(NULL, NULL);
 }
-static void __init ti8168_evm_init_irq(void)
-{
-	omap_init_irq();
-}
 static void __init ti8168_evm_init(void)
 {
 	omap_serial_init();
@@ -56,7 +51,7 @@ MACHINE_START(TI8168EVM, "ti8168evm")
 	.boot_params	= 0x80000100,
 	.map_io		= ti8168_evm_map_io,
 	.init_early	= ti8168_init_early,
-	.init_irq	= ti8168_evm_init_irq,
+	.init_irq	= ti816x_init_irq,
-	.timer		= &omap_timer,
+	.timer		= &omap3_timer,
 	.init_machine	= ti8168_evm_init,
 MACHINE_END
--- a/arch/arm/mach-omap2/board-zoom-peripherals.c
+++ b/arch/arm/mach-omap2/board-zoom-peripherals.c
@@ -105,21 +105,20 @@ static struct twl4030_keypad_data zoom_kp_twl4030_data = {
 	.rep		= 1,
 };
-static struct regulator_consumer_supply zoom_vmmc1_supply = {
+static struct regulator_consumer_supply zoom_vmmc1_supply[] = {
-	.supply		= "vmmc",
+	REGULATOR_SUPPLY("vmmc", "omap_hsmmc.0"),
 };
-static struct regulator_consumer_supply zoom_vsim_supply = {
+static struct regulator_consumer_supply zoom_vsim_supply[] = {
-	.supply		= "vmmc_aux",
+	REGULATOR_SUPPLY("vmmc_aux", "omap_hsmmc.0"),
 };
-static struct regulator_consumer_supply zoom_vmmc2_supply = {
+static struct regulator_consumer_supply zoom_vmmc2_supply[] = {
-	.supply		= "vmmc",
+	REGULATOR_SUPPLY("vmmc", "omap_hsmmc.1"),
 };
-static struct regulator_consumer_supply zoom_vmmc3_supply = {
+static struct regulator_consumer_supply zoom_vmmc3_supply[] = {
-	.supply		= "vmmc",
+	REGULATOR_SUPPLY("vmmc", "omap_hsmmc.2"),
-	.dev_name	= "omap_hsmmc.2",
 };
 /* VMMC1 for OMAP VDD_MMC1 (i/o) and MMC1 card */
@@ -133,8 +132,8 @@ static struct regulator_init_data zoom_vmmc1 = {
 					| REGULATOR_CHANGE_MODE
 					| REGULATOR_CHANGE_STATUS,
 	},
-	.num_consumer_supplies  = 1,
+	.num_consumer_supplies  = ARRAY_SIZE(zoom_vmmc1_supply),
-	.consumer_supplies      = &zoom_vmmc1_supply,
+	.consumer_supplies      = zoom_vmmc1_supply,
 };
 /* VMMC2 for MMC2 card */
@@ -148,8 +147,8 @@ static struct regulator_init_data zoom_vmmc2 = {
 		.valid_ops_mask		= REGULATOR_CHANGE_MODE
 					| REGULATOR_CHANGE_STATUS,
 	},
-	.num_consumer_supplies  = 1,
+	.num_consumer_supplies  = ARRAY_SIZE(zoom_vmmc2_supply),
-	.consumer_supplies      = &zoom_vmmc2_supply,
+	.consumer_supplies      = zoom_vmmc2_supply,
 };
 /* VSIM for OMAP VDD_MMC1A (i/o for DAT4..DAT7) */
@@ -163,16 +162,16 @@ static struct regulator_init_data zoom_vsim = {
 					| REGULATOR_CHANGE_MODE
 					| REGULATOR_CHANGE_STATUS,
 	},
-	.num_consumer_supplies  = 1,
+	.num_consumer_supplies  = ARRAY_SIZE(zoom_vsim_supply),
-	.consumer_supplies      = &zoom_vsim_supply,
+	.consumer_supplies      = zoom_vsim_supply,
 };
 static struct regulator_init_data zoom_vmmc3 = {
 	.constraints = {
 		.valid_ops_mask	= REGULATOR_CHANGE_STATUS,
 	},
-	.num_consumer_supplies	= 1,
+	.num_consumer_supplies	= ARRAY_SIZE(zoom_vmmc3_supply),
-	.consumer_supplies = &zoom_vmmc3_supply,
+	.consumer_supplies	= zoom_vmmc3_supply,
 };
 static struct fixed_voltage_config zoom_vwlan = {
@@ -227,40 +226,6 @@ static struct omap2_hsmmc_info mmc[] = {
 	{}      /* Terminator */
 };
-static struct regulator_consumer_supply zoom_vpll2_supplies[] = {
-	REGULATOR_SUPPLY("vdds_dsi", "omapdss"),
-	REGULATOR_SUPPLY("vdds_dsi", "omapdss_dsi1"),
-};
-static struct regulator_consumer_supply zoom_vdda_dac_supply =
-	REGULATOR_SUPPLY("vdda_dac", "omapdss_venc");
-static struct regulator_init_data zoom_vpll2 = {
-	.constraints = {
-		.min_uV                 = 1800000,
-		.max_uV                 = 1800000,
-		.valid_modes_mask       = REGULATOR_MODE_NORMAL
-					| REGULATOR_MODE_STANDBY,
-		.valid_ops_mask         = REGULATOR_CHANGE_MODE
-					| REGULATOR_CHANGE_STATUS,
-	},
-	.num_consumer_supplies		= ARRAY_SIZE(zoom_vpll2_supplies),
-	.consumer_supplies		= zoom_vpll2_supplies,
-};
-static struct regulator_init_data zoom_vdac = {
-	.constraints = {
-		.min_uV                 = 1800000,
-		.max_uV                 = 1800000,
-		.valid_modes_mask       = REGULATOR_MODE_NORMAL
-					| REGULATOR_MODE_STANDBY,
-		.valid_ops_mask         = REGULATOR_CHANGE_MODE
-					| REGULATOR_CHANGE_STATUS,
-	},
-	.num_consumer_supplies		= 1,
-	.consumer_supplies		= &zoom_vdda_dac_supply,
-};
 static int zoom_twl_gpio_setup(struct device *dev,
 		unsigned gpio, unsigned ngpio)
 {
@@ -270,13 +235,6 @@ static int zoom_twl_gpio_setup(struct device *dev,
 	mmc[0].gpio_cd = gpio + 0;
 	omap2_hsmmc_init(mmc);
-	/* link regulators to MMC adapters ... we "know" the
-	 * regulators will be set up only *after* we return.
-	*/
-	zoom_vmmc1_supply.dev = mmc[0].dev;
-	zoom_vsim_supply.dev = mmc[0].dev;
-	zoom_vmmc2_supply.dev = mmc[1].dev;
 	ret = gpio_request_one(LCD_PANEL_ENABLE_GPIO, GPIOF_OUT_INIT_LOW,
 			       "lcd enable");
 	if (ret)
@@ -292,26 +250,6 @@ static void zoom2_set_hs_extmute(int mute)
 	gpio_set_value(ZOOM2_HEADSET_EXTMUTE_GPIO, mute);
 }
-static int zoom_batt_table[] = {
-/* 0 C*/
-30800, 29500, 28300, 27100,
-26000, 24900, 23900, 22900, 22000, 21100, 20300, 19400, 18700, 17900,
-17200, 16500, 15900, 15300, 14700, 14100, 13600, 13100, 12600, 12100,
-11600, 11200, 10800, 10400, 10000, 9630,  9280,  8950,  8620,  8310,
-8020,  7730,  7460,  7200,  6950,  6710,  6470,  6250,  6040,  5830,
-5640,  5450,  5260,  5090,  4920,  4760,  4600,  4450,  4310,  4170,
-4040,  3910,  3790,  3670,  3550
-};
-static struct twl4030_bci_platform_data zoom_bci_data = {
-	.battery_tmp_tbl	= zoom_batt_table,
-	.tblsize		= ARRAY_SIZE(zoom_batt_table),
-};
-static struct twl4030_usb_data zoom_usb_data = {
-	.usb_mode	= T2_USB_MODE_ULPI,
-};
 static struct twl4030_gpio_platform_data zoom_gpio_data = {
 	.gpio_base	= OMAP_MAX_GPIO_LINES,
 	.irq_base	= TWL4030_GPIO_IRQ_BASE,
@@ -319,41 +257,29 @@ static struct twl4030_gpio_platform_data zoom_gpio_data = {
 	.setup		= zoom_twl_gpio_setup,
 };
-static struct twl4030_madc_platform_data zoom_madc_data = {
-	.irq_line	= 1,
-};
-static struct twl4030_codec_audio_data zoom_audio_data;
-static struct twl4030_codec_data zoom_codec_data = {
-	.audio_mclk = 26000000,
-	.audio = &zoom_audio_data,
-};
 static struct twl4030_platform_data zoom_twldata = {
-	.irq_base	= TWL4030_IRQ_BASE,
-	.irq_end	= TWL4030_IRQ_END,
 	/* platform_data for children goes here */
-	.bci		= &zoom_bci_data,
-	.madc		= &zoom_madc_data,
-	.usb		= &zoom_usb_data,
 	.gpio		= &zoom_gpio_data,
 	.keypad		= &zoom_kp_twl4030_data,
-	.codec		= &zoom_codec_data,
 	.vmmc1          = &zoom_vmmc1,
 	.vmmc2          = &zoom_vmmc2,
 	.vsim           = &zoom_vsim,
-	.vpll2		= &zoom_vpll2,
-	.vdac		= &zoom_vdac,
 };
 static int __init omap_i2c_init(void)
 {
+	omap3_pmic_get_config(&zoom_twldata,
+			TWL_COMMON_PDATA_USB | TWL_COMMON_PDATA_BCI |
+			TWL_COMMON_PDATA_MADC | TWL_COMMON_PDATA_AUDIO,
+			TWL_COMMON_REGULATOR_VDAC | TWL_COMMON_REGULATOR_VPLL2);
 	if (machine_is_omap_zoom2()) {
-		zoom_audio_data.ramp_delay_value = 3;	/* 161 ms */
+		struct twl4030_codec_data *codec_data;
-		zoom_audio_data.hs_extmute = 1;
+		codec_data = zoom_twldata.audio->codec;
-		zoom_audio_data.set_hs_extmute = zoom2_set_hs_extmute;
+		codec_data->ramp_delay_value = 3;	/* 161 ms */
+		codec_data->hs_extmute = 1;
+		codec_data->set_hs_extmute = zoom2_set_hs_extmute;
 	}
 	omap_pmic_init(1, 2400, "twl5030", INT_34XX_SYS_NIRQ, &zoom_twldata);
 	omap_register_i2c_bus(2, 400, NULL, 0);

--- a/arch/arm/mach-omap2/board-zoom.c
+++ b/arch/arm/mach-omap2/board-zoom.c
@@ -137,9 +137,9 @@ MACHINE_START(OMAP_ZOOM2, "OMAP Zoom2 board")
 	.reserve	= omap_reserve,
 	.map_io		= omap3_map_io,
 	.init_early	= omap_zoom_init_early,
-	.init_irq	= omap_init_irq,
+	.init_irq	= omap3_init_irq,
 	.init_machine	= omap_zoom_init,
-	.timer		= &omap_timer,
+	.timer		= &omap3_timer,
 MACHINE_END
 MACHINE_START(OMAP_ZOOM3, "OMAP Zoom3 board")
@@ -147,7 +147,7 @@ MACHINE_START(OMAP_ZOOM3, "OMAP Zoom3 board")
 	.reserve	= omap_reserve,
 	.map_io		= omap3_map_io,
 	.init_early	= omap_zoom_init_early,
-	.init_irq	= omap_init_irq,
+	.init_irq	= omap3_init_irq,
 	.init_machine	= omap_zoom_init,
-	.timer		= &omap_timer,
+	.timer		= &omap3_timer,
 MACHINE_END
--- a/arch/arm/mach-omap2/clock.c
+++ b/arch/arm/mach-omap2/clock.c
@@ -37,6 +37,14 @@
 u8 cpu_mask;
+/*
+ * clkdm_control: if true, then when a clock is enabled in the
+ * hardware, its clockdomain will first be enabled; and when a clock
+ * is disabled in the hardware, its clockdomain will be disabled
+ * afterwards.
+ */
+static bool clkdm_control = true;
 /*
 * OMAP2+ specific clock functions
 */
@@ -99,6 +107,19 @@ void omap2_init_clk_clkdm(struct clk *clk)
 	}
 }
+/**
+ * omap2_clk_disable_clkdm_control - disable clkdm control on clk enable/disable
+ *
+ * Prevent the OMAP clock code from calling into the clockdomain code
+ * when a hardware clock in that clockdomain is enabled or disabled.
+ * Intended to be called at init time from omap*_clk_init().  No
+ * return value.
+ */
+void __init omap2_clk_disable_clkdm_control(void)
+{
+	clkdm_control = false;
+}
 /**
 * omap2_clk_dflt_find_companion - find companion clock to @clk
 * @clk: struct clk * to find the companion clock of
@@ -268,7 +289,7 @@ void omap2_clk_disable(struct clk *clk)
 		clk->ops->disable(clk);
 	}
-	if (clk->clkdm)
+	if (clkdm_control && clk->clkdm)
 		clkdm_clk_disable(clk->clkdm, clk);
 	if (clk->parent)
@@ -308,7 +329,7 @@ int omap2_clk_enable(struct clk *clk)
 		}
 	}
-	if (clk->clkdm) {
+	if (clkdm_control && clk->clkdm) {
 		ret = clkdm_clk_enable(clk->clkdm, clk);
 		if (ret) {
 			WARN(1, "clock: %s: could not enable clockdomain %s: "
@@ -330,7 +351,7 @@ int omap2_clk_enable(struct clk *clk)
 	return 0;
 oce_err3:
-	if (clk->clkdm)
+	if (clkdm_control && clk->clkdm)
 		clkdm_clk_disable(clk->clkdm, clk);
 oce_err2:
 	if (clk->parent)

--- a/arch/arm/mach-omap2/clock.h
+++ b/arch/arm/mach-omap2/clock.h
@@ -16,6 +16,8 @@
 #ifndef __ARCH_ARM_MACH_OMAP2_CLOCK_H
 #define __ARCH_ARM_MACH_OMAP2_CLOCK_H
+#include <linux/kernel.h>
 #include <plat/clock.h>
 /* CM_CLKSEL2_PLL.CORE_CLK_SRC bits (2XXX) */
@@ -72,6 +74,7 @@ void omap2_clk_disable_unused(struct clk *clk);
 #endif
 void omap2_init_clk_clkdm(struct clk *clk);
+void __init omap2_clk_disable_clkdm_control(void);
 /* clkt_clksel.c public functions */
 u32 omap2_clksel_round_rate_div(struct clk *clk, unsigned long target_rate,

--- a/arch/arm/mach-omap2/clock2420_data.c
+++ b/arch/arm/mach-omap2/clock2420_data.c
@@ -1805,9 +1805,9 @@ static struct omap_clk omap2420_clks[] = {
 	CLK(NULL,	"gfx_ick",	&gfx_ick,	CK_242X),
 	/* DSS domain clocks */
 	CLK("omapdss_dss",	"ick",		&dss_ick,	CK_242X),
-	CLK("omapdss_dss",	"fck",		&dss1_fck,	CK_242X),
+	CLK(NULL,	"dss1_fck",		&dss1_fck,	CK_242X),
-	CLK("omapdss_dss",	"sys_clk",	&dss2_fck,	CK_242X),
+	CLK(NULL,	"dss2_fck",	&dss2_fck,	CK_242X),
-	CLK("omapdss_dss",	"tv_clk",	&dss_54m_fck,	CK_242X),
+	CLK(NULL,	"dss_54m_fck",	&dss_54m_fck,	CK_242X),
 	/* L3 domain clocks */
 	CLK(NULL,	"core_l3_ck",	&core_l3_ck,	CK_242X),
 	CLK(NULL,	"ssi_fck",	&ssi_ssr_sst_fck, CK_242X),
@@ -1844,13 +1844,13 @@ static struct omap_clk omap2420_clks[] = {
 	CLK(NULL,	"gpt12_ick",	&gpt12_ick,	CK_242X),
 	CLK(NULL,	"gpt12_fck",	&gpt12_fck,	CK_242X),
 	CLK("omap-mcbsp.1", "ick",	&mcbsp1_ick,	CK_242X),
-	CLK("omap-mcbsp.1", "fck",	&mcbsp1_fck,	CK_242X),
+	CLK(NULL,	"mcbsp1_fck",	&mcbsp1_fck,	CK_242X),
 	CLK("omap-mcbsp.2", "ick",	&mcbsp2_ick,	CK_242X),
-	CLK("omap-mcbsp.2", "fck",	&mcbsp2_fck,	CK_242X),
+	CLK(NULL,	"mcbsp2_fck",	&mcbsp2_fck,	CK_242X),
 	CLK("omap2_mcspi.1", "ick",	&mcspi1_ick,	CK_242X),
-	CLK("omap2_mcspi.1", "fck",	&mcspi1_fck,	CK_242X),
+	CLK(NULL,	"mcspi1_fck",	&mcspi1_fck,	CK_242X),
 	CLK("omap2_mcspi.2", "ick",	&mcspi2_ick,	CK_242X),
-	CLK("omap2_mcspi.2", "fck",	&mcspi2_fck,	CK_242X),
+	CLK(NULL,	"mcspi2_fck",	&mcspi2_fck,	CK_242X),
 	CLK(NULL,	"uart1_ick",	&uart1_ick,	CK_242X),
 	CLK(NULL,	"uart1_fck",	&uart1_fck,	CK_242X),
 	CLK(NULL,	"uart2_ick",	&uart2_ick,	CK_242X),
@@ -1860,7 +1860,7 @@ static struct omap_clk omap2420_clks[] = {
 	CLK(NULL,	"gpios_ick",	&gpios_ick,	CK_242X),
 	CLK(NULL,	"gpios_fck",	&gpios_fck,	CK_242X),
 	CLK("omap_wdt",	"ick",		&mpu_wdt_ick,	CK_242X),
-	CLK("omap_wdt",	"fck",		&mpu_wdt_fck,	CK_242X),
+	CLK(NULL,	"mpu_wdt_fck",	&mpu_wdt_fck,	CK_242X),
 	CLK(NULL,	"sync_32k_ick",	&sync_32k_ick,	CK_242X),
 	CLK(NULL,	"wdt1_ick",	&wdt1_ick,	CK_242X),
 	CLK(NULL,	"omapctrl_ick",	&omapctrl_ick,	CK_242X),
@@ -1880,11 +1880,11 @@ static struct omap_clk omap2420_clks[] = {
 	CLK(NULL,	"eac_ick",	&eac_ick,	CK_242X),
 	CLK(NULL,	"eac_fck",	&eac_fck,	CK_242X),
 	CLK("omap_hdq.0", "ick",	&hdq_ick,	CK_242X),
-	CLK("omap_hdq.1", "fck",	&hdq_fck,	CK_242X),
+	CLK("omap_hdq.0", "fck",	&hdq_fck,	CK_242X),
 	CLK("omap_i2c.1", "ick",	&i2c1_ick,	CK_242X),
-	CLK("omap_i2c.1", "fck",	&i2c1_fck,	CK_242X),
+	CLK(NULL,	"i2c1_fck",	&i2c1_fck,	CK_242X),
 	CLK("omap_i2c.2", "ick",	&i2c2_ick,	CK_242X),
-	CLK("omap_i2c.2", "fck",	&i2c2_fck,	CK_242X),
+	CLK(NULL,	"i2c2_fck",	&i2c2_fck,	CK_242X),
 	CLK(NULL,	"gpmc_fck",	&gpmc_fck,	CK_242X),
 	CLK(NULL,	"sdma_fck",	&sdma_fck,	CK_242X),
 	CLK(NULL,	"sdma_ick",	&sdma_ick,	CK_242X),

--- a/arch/arm/mach-omap2/clock2430_data.c
+++ b/arch/arm/mach-omap2/clock2430_data.c
@@ -1895,9 +1895,9 @@ static struct omap_clk omap2430_clks[] = {
 	CLK(NULL,	"mdm_osc_ck",	&mdm_osc_ck,	CK_243X),
 	/* DSS domain clocks */
 	CLK("omapdss_dss",	"ick",		&dss_ick,	CK_243X),
-	CLK("omapdss_dss",	"fck",		&dss1_fck,	CK_243X),
+	CLK(NULL,	"dss1_fck",		&dss1_fck,	CK_243X),
-	CLK("omapdss_dss",	"sys_clk",	&dss2_fck,	CK_243X),
+	CLK(NULL,	"dss2_fck",	&dss2_fck,	CK_243X),
-	CLK("omapdss_dss",	"tv_clk",	&dss_54m_fck,	CK_243X),
+	CLK(NULL,	"dss_54m_fck",	&dss_54m_fck,	CK_243X),
 	/* L3 domain clocks */
 	CLK(NULL,	"core_l3_ck",	&core_l3_ck,	CK_243X),
 	CLK(NULL,	"ssi_fck",	&ssi_ssr_sst_fck, CK_243X),
@@ -1934,21 +1934,21 @@ static struct omap_clk omap2430_clks[] = {
 	CLK(NULL,	"gpt12_ick",	&gpt12_ick,	CK_243X),
 	CLK(NULL,	"gpt12_fck",	&gpt12_fck,	CK_243X),
 	CLK("omap-mcbsp.1", "ick",	&mcbsp1_ick,	CK_243X),
-	CLK("omap-mcbsp.1", "fck",	&mcbsp1_fck,	CK_243X),
+	CLK(NULL,	"mcbsp1_fck",	&mcbsp1_fck,	CK_243X),
 	CLK("omap-mcbsp.2", "ick",	&mcbsp2_ick,	CK_243X),
-	CLK("omap-mcbsp.2", "fck",	&mcbsp2_fck,	CK_243X),
+	CLK(NULL,	"mcbsp2_fck",	&mcbsp2_fck,	CK_243X),
 	CLK("omap-mcbsp.3", "ick",	&mcbsp3_ick,	CK_243X),
-	CLK("omap-mcbsp.3", "fck",	&mcbsp3_fck,	CK_243X),
+	CLK(NULL,	"mcbsp3_fck",	&mcbsp3_fck,	CK_243X),
 	CLK("omap-mcbsp.4", "ick",	&mcbsp4_ick,	CK_243X),
-	CLK("omap-mcbsp.4", "fck",	&mcbsp4_fck,	CK_243X),
+	CLK(NULL,	"mcbsp4_fck",	&mcbsp4_fck,	CK_243X),
 	CLK("omap-mcbsp.5", "ick",	&mcbsp5_ick,	CK_243X),
-	CLK("omap-mcbsp.5", "fck",	&mcbsp5_fck,	CK_243X),
+	CLK(NULL,	"mcbsp5_fck",	&mcbsp5_fck,	CK_243X),
 	CLK("omap2_mcspi.1", "ick",	&mcspi1_ick,	CK_243X),
-	CLK("omap2_mcspi.1", "fck",	&mcspi1_fck,	CK_243X),
+	CLK(NULL,	"mcspi1_fck",	&mcspi1_fck,	CK_243X),
 	CLK("omap2_mcspi.2", "ick",	&mcspi2_ick,	CK_243X),
-	CLK("omap2_mcspi.2", "fck",	&mcspi2_fck,	CK_243X),
+	CLK(NULL,	"mcspi2_fck",	&mcspi2_fck,	CK_243X),
 	CLK("omap2_mcspi.3", "ick",	&mcspi3_ick,	CK_243X),
-	CLK("omap2_mcspi.3", "fck",	&mcspi3_fck,	CK_243X),
+	CLK(NULL,	"mcspi3_fck",	&mcspi3_fck,	CK_243X),
 	CLK(NULL,	"uart1_ick",	&uart1_ick,	CK_243X),
 	CLK(NULL,	"uart1_fck",	&uart1_fck,	CK_243X),
 	CLK(NULL,	"uart2_ick",	&uart2_ick,	CK_243X),
@@ -1958,7 +1958,7 @@ static struct omap_clk omap2430_clks[] = {
 	CLK(NULL,	"gpios_ick",	&gpios_ick,	CK_243X),
 	CLK(NULL,	"gpios_fck",	&gpios_fck,	CK_243X),
 	CLK("omap_wdt",	"ick",		&mpu_wdt_ick,	CK_243X),
-	CLK("omap_wdt",	"fck",		&mpu_wdt_fck,	CK_243X),
+	CLK(NULL,	"mpu_wdt_fck",	&mpu_wdt_fck,	CK_243X),
 	CLK(NULL,	"sync_32k_ick",	&sync_32k_ick,	CK_243X),
 	CLK(NULL,	"wdt1_ick",	&wdt1_ick,	CK_243X),
 	CLK(NULL,	"omapctrl_ick",	&omapctrl_ick,	CK_243X),
@@ -1975,9 +1975,9 @@ static struct omap_clk omap2430_clks[] = {
 	CLK("omap_hdq.0", "ick",	&hdq_ick,	CK_243X),
 	CLK("omap_hdq.1", "fck",	&hdq_fck,	CK_243X),
 	CLK("omap_i2c.1", "ick",	&i2c1_ick,	CK_243X),
-	CLK("omap_i2c.1", "fck",	&i2chs1_fck,	CK_243X),
+	CLK(NULL,	"i2chs1_fck",	&i2chs1_fck,	CK_243X),
 	CLK("omap_i2c.2", "ick",	&i2c2_ick,	CK_243X),
-	CLK("omap_i2c.2", "fck",	&i2chs2_fck,	CK_243X),
+	CLK(NULL,	"i2chs2_fck",	&i2chs2_fck,	CK_243X),
 	CLK(NULL,	"gpmc_fck",	&gpmc_fck,	CK_243X),
 	CLK(NULL,	"sdma_fck",	&sdma_fck,	CK_243X),
 	CLK(NULL,	"sdma_ick",	&sdma_ick,	CK_243X),
@@ -1990,9 +1990,9 @@ static struct omap_clk omap2430_clks[] = {
 	CLK(NULL,	"usb_fck",	&usb_fck,	CK_243X),
 	CLK("musb-omap2430",	"ick",	&usbhs_ick,	CK_243X),
 	CLK("omap_hsmmc.0", "ick",	&mmchs1_ick,	CK_243X),
-	CLK("omap_hsmmc.0", "fck",	&mmchs1_fck,	CK_243X),
+	CLK(NULL,	"mmchs1_fck",	&mmchs1_fck,	CK_243X),
 	CLK("omap_hsmmc.1", "ick",	&mmchs2_ick,	CK_243X),
-	CLK("omap_hsmmc.1", "fck",	&mmchs2_fck,	CK_243X),
+	CLK(NULL,	"mmchs2_fck",	&mmchs2_fck,	CK_243X),
 	CLK(NULL,	"gpio5_ick",	&gpio5_ick,	CK_243X),
 	CLK(NULL,	"gpio5_fck",	&gpio5_fck,	CK_243X),
 	CLK(NULL,	"mdm_intc_ick",	&mdm_intc_ick,	CK_243X),

--- a/arch/arm/mach-omap2/clock3xxx_data.c
+++ b/arch/arm/mach-omap2/clock3xxx_data.c
@@ -3289,25 +3289,25 @@ static struct omap_clk omap3xxx_clks[] = {
 	CLK("omap-mcbsp.1",	"prcm_fck",	&core_96m_fck,	CK_3XXX),
 	CLK("omap-mcbsp.5",	"prcm_fck",	&core_96m_fck,	CK_3XXX),
 	CLK(NULL,	"core_96m_fck",	&core_96m_fck,	CK_3XXX),
-	CLK("omap_hsmmc.2",	"fck",	&mmchs3_fck,	CK_3430ES2PLUS | CK_AM35XX | CK_36XX),
+	CLK(NULL,	"mmchs3_fck",	&mmchs3_fck,	CK_3430ES2PLUS | CK_AM35XX | CK_36XX),
-	CLK("omap_hsmmc.1",	"fck",	&mmchs2_fck,	CK_3XXX),
+	CLK(NULL,	"mmchs2_fck",	&mmchs2_fck,	CK_3XXX),
 	CLK(NULL,	"mspro_fck",	&mspro_fck,	CK_34XX | CK_36XX),
-	CLK("omap_hsmmc.0",	"fck",	&mmchs1_fck,	CK_3XXX),
+	CLK(NULL,	"mmchs1_fck",	&mmchs1_fck,	CK_3XXX),
-	CLK("omap_i2c.3", "fck",	&i2c3_fck,	CK_3XXX),
+	CLK(NULL,	"i2c3_fck",	&i2c3_fck,	CK_3XXX),
-	CLK("omap_i2c.2", "fck",	&i2c2_fck,	CK_3XXX),
+	CLK(NULL,	"i2c2_fck",	&i2c2_fck,	CK_3XXX),
-	CLK("omap_i2c.1", "fck",	&i2c1_fck,	CK_3XXX),
+	CLK(NULL,	"i2c1_fck",	&i2c1_fck,	CK_3XXX),
-	CLK("omap-mcbsp.5", "fck",	&mcbsp5_fck,	CK_3XXX),
+	CLK(NULL,	"mcbsp5_fck",	&mcbsp5_fck,	CK_3XXX),
-	CLK("omap-mcbsp.1", "fck",	&mcbsp1_fck,	CK_3XXX),
+	CLK(NULL,	"mcbsp1_fck",	&mcbsp1_fck,	CK_3XXX),
 	CLK(NULL,	"core_48m_fck",	&core_48m_fck,	CK_3XXX),
-	CLK("omap2_mcspi.4", "fck",	&mcspi4_fck,	CK_3XXX),
+	CLK(NULL,	"mcspi4_fck",	&mcspi4_fck,	CK_3XXX),
-	CLK("omap2_mcspi.3", "fck",	&mcspi3_fck,	CK_3XXX),
+	CLK(NULL,	"mcspi3_fck",	&mcspi3_fck,	CK_3XXX),
-	CLK("omap2_mcspi.2", "fck",	&mcspi2_fck,	CK_3XXX),
+	CLK(NULL,	"mcspi2_fck",	&mcspi2_fck,	CK_3XXX),
-	CLK("omap2_mcspi.1", "fck",	&mcspi1_fck,	CK_3XXX),
+	CLK(NULL,	"mcspi1_fck",	&mcspi1_fck,	CK_3XXX),
 	CLK(NULL,	"uart2_fck",	&uart2_fck,	CK_3XXX),
 	CLK(NULL,	"uart1_fck",	&uart1_fck,	CK_3XXX),
 	CLK(NULL,	"fshostusb_fck", &fshostusb_fck, CK_3430ES1),
 	CLK(NULL,	"core_12m_fck",	&core_12m_fck,	CK_3XXX),
-	CLK("omap_hdq.0", "fck",	&hdq_fck,	CK_3XXX),
+	CLK("omap_hdq.0",	"fck",	&hdq_fck,	CK_3XXX),
 	CLK(NULL,	"ssi_ssr_fck",	&ssi_ssr_fck_3430es1,	CK_3430ES1),
 	CLK(NULL,	"ssi_ssr_fck",	&ssi_ssr_fck_3430es2,	CK_3430ES2PLUS | CK_36XX),
 	CLK(NULL,	"ssi_sst_fck",	&ssi_sst_fck_3430es1,	CK_3430ES1),
@@ -3356,11 +3356,11 @@ static struct omap_clk omap3xxx_clks[] = {
 	CLK("omap_rng",	"ick",		&rng_ick,	CK_34XX | CK_36XX),
 	CLK(NULL,	"sha11_ick",	&sha11_ick,	CK_34XX | CK_36XX),
 	CLK(NULL,	"des1_ick",	&des1_ick,	CK_34XX | CK_36XX),
-	CLK("omapdss_dss",	"fck",		&dss1_alwon_fck_3430es1, CK_3430ES1),
+	CLK(NULL,	"dss1_alwon_fck",		&dss1_alwon_fck_3430es1, CK_3430ES1),
-	CLK("omapdss_dss",	"fck",		&dss1_alwon_fck_3430es2, CK_3430ES2PLUS | CK_AM35XX | CK_36XX),
+	CLK(NULL,	"dss1_alwon_fck",		&dss1_alwon_fck_3430es2, CK_3430ES2PLUS | CK_AM35XX | CK_36XX),
-	CLK("omapdss_dss",	"tv_clk",	&dss_tv_fck,	CK_3XXX),
+	CLK(NULL,	"dss_tv_fck",	&dss_tv_fck,	CK_3XXX),
-	CLK("omapdss_dss",	"video_clk",	&dss_96m_fck,	CK_3XXX),
+	CLK(NULL,	"dss_96m_fck",	&dss_96m_fck,	CK_3XXX),
-	CLK("omapdss_dss",	"sys_clk",	&dss2_alwon_fck, CK_3XXX),
+	CLK(NULL,	"dss2_alwon_fck",	&dss2_alwon_fck, CK_3XXX),
 	CLK("omapdss_dss",	"ick",		&dss_ick_3430es1,	CK_3430ES1),
 	CLK("omapdss_dss",	"ick",		&dss_ick_3430es2,	CK_3430ES2PLUS | CK_AM35XX | CK_36XX),
 	CLK(NULL,	"cam_mclk",	&cam_mclk,	CK_34XX | CK_36XX),
@@ -3385,7 +3385,7 @@ static struct omap_clk omap3xxx_clks[] = {
 	CLK(NULL,	"gpt1_fck",	&gpt1_fck,	CK_3XXX),
 	CLK(NULL,	"wkup_32k_fck",	&wkup_32k_fck,	CK_3XXX),
 	CLK(NULL,	"gpio1_dbck",	&gpio1_dbck,	CK_3XXX),
-	CLK("omap_wdt",	"fck",		&wdt2_fck,	CK_3XXX),
+	CLK(NULL,	"wdt2_fck",		&wdt2_fck,	CK_3XXX),
 	CLK(NULL,	"wkup_l4_ick",	&wkup_l4_ick,	CK_34XX | CK_36XX),
 	CLK(NULL,	"usim_ick",	&usim_ick,	CK_3430ES2PLUS | CK_36XX),
 	CLK("omap_wdt",	"ick",		&wdt2_ick,	CK_3XXX),
@@ -3436,9 +3436,9 @@ static struct omap_clk omap3xxx_clks[] = {
 	CLK("omap-mcbsp.2", "ick",	&mcbsp2_ick,	CK_3XXX),
 	CLK("omap-mcbsp.3", "ick",	&mcbsp3_ick,	CK_3XXX),
 	CLK("omap-mcbsp.4", "ick",	&mcbsp4_ick,	CK_3XXX),
-	CLK("omap-mcbsp.2", "fck",	&mcbsp2_fck,	CK_3XXX),
+	CLK(NULL,	"mcbsp2_fck",	&mcbsp2_fck,	CK_3XXX),
-	CLK("omap-mcbsp.3", "fck",	&mcbsp3_fck,	CK_3XXX),
+	CLK(NULL,	"mcbsp3_fck",	&mcbsp3_fck,	CK_3XXX),
-	CLK("omap-mcbsp.4", "fck",	&mcbsp4_fck,	CK_3XXX),
+	CLK(NULL,	"mcbsp4_fck",	&mcbsp4_fck,	CK_3XXX),
 	CLK("etb",	"emu_src_ck",	&emu_src_ck,	CK_3XXX),
 	CLK(NULL,	"pclk_fck",	&pclk_fck,	CK_3XXX),
 	CLK(NULL,	"pclkx2_fck",	&pclkx2_fck,	CK_3XXX),

--- a/arch/arm/mach-omap2/clock44xx.h
+++ b/arch/arm/mach-omap2/clock44xx.h
@@ -8,13 +8,6 @@
 #ifndef __ARCH_ARM_MACH_OMAP2_CLOCK44XX_H
 #define __ARCH_ARM_MACH_OMAP2_CLOCK44XX_H
-/*
- * XXX Missing values for the OMAP4 DPLL_USB
- * XXX Missing min_multiplier values for all OMAP4 DPLLs
- */
-#define OMAP4430_MAX_DPLL_MULT	2047
-#define OMAP4430_MAX_DPLL_DIV	128
 int omap4xxx_clk_init(void);
 #endif
--- a/arch/arm/mach-omap2/clock44xx_data.c
+++ b/arch/arm/mach-omap2/clock44xx_data.c
--- a/arch/arm/mach-omap2/clockdomain.c
+++ b/arch/arm/mach-omap2/clockdomain.c
 /*
 * OMAP2/3/4 clockdomain framework functions
 *
- * Copyright (C) 2008-2010 Texas Instruments, Inc.
+ * Copyright (C) 2008-2011 Texas Instruments, Inc.
- * Copyright (C) 2008-2010 Nokia Corporation
+ * Copyright (C) 2008-2011 Nokia Corporation
 *
 * Written by Paul Walmsley and Jouni Högander
 * Added OMAP4 specific support by Abhijit Pagare <abhijitpagare@ti.com>
@@ -92,6 +92,8 @@ static int _clkdm_register(struct clockdomain *clkdm)
 	pwrdm_add_clkdm(pwrdm, clkdm);
+	spin_lock_init(&clkdm->lock);
 	pr_debug("clockdomain: registered %s\n", clkdm->name);
 	return 0;
@@ -690,6 +692,9 @@ int clkdm_clear_all_sleepdeps(struct clockdomain *clkdm)
 */
 int clkdm_sleep(struct clockdomain *clkdm)
 {
+	int ret;
+	unsigned long flags;
 	if (!clkdm)
 		return -EINVAL;
@@ -704,7 +709,11 @@ int clkdm_sleep(struct clockdomain *clkdm)
 	pr_debug("clockdomain: forcing sleep on %s\n", clkdm->name);
-	return arch_clkdm->clkdm_sleep(clkdm);
+	spin_lock_irqsave(&clkdm->lock, flags);
+	clkdm->_flags &= ~_CLKDM_FLAG_HWSUP_ENABLED;
+	ret = arch_clkdm->clkdm_sleep(clkdm);
+	spin_unlock_irqrestore(&clkdm->lock, flags);
+	return ret;
 }
 /**
@@ -718,6 +727,9 @@ int clkdm_sleep(struct clockdomain *clkdm)
 */
 int clkdm_wakeup(struct clockdomain *clkdm)
 {
+	int ret;
+	unsigned long flags;
 	if (!clkdm)
 		return -EINVAL;
@@ -732,7 +744,11 @@ int clkdm_wakeup(struct clockdomain *clkdm)
 	pr_debug("clockdomain: forcing wakeup on %s\n", clkdm->name);
-	return arch_clkdm->clkdm_wakeup(clkdm);
+	spin_lock_irqsave(&clkdm->lock, flags);
+	clkdm->_flags &= ~_CLKDM_FLAG_HWSUP_ENABLED;
+	ret = arch_clkdm->clkdm_wakeup(clkdm);
+	spin_unlock_irqrestore(&clkdm->lock, flags);
+	return ret;
 }
 /**
@@ -747,6 +763,8 @@ int clkdm_wakeup(struct clockdomain *clkdm)
 */
 void clkdm_allow_idle(struct clockdomain *clkdm)
 {
+	unsigned long flags;
 	if (!clkdm)
 		return;
@@ -762,8 +780,11 @@ void clkdm_allow_idle(struct clockdomain *clkdm)
 	pr_debug("clockdomain: enabling automatic idle transitions for %s\n",
 		 clkdm->name);
+	spin_lock_irqsave(&clkdm->lock, flags);
+	clkdm->_flags |= _CLKDM_FLAG_HWSUP_ENABLED;
 	arch_clkdm->clkdm_allow_idle(clkdm);
 	pwrdm_clkdm_state_switch(clkdm);
+	spin_unlock_irqrestore(&clkdm->lock, flags);
 }
 /**
@@ -777,6 +798,8 @@ void clkdm_allow_idle(struct clockdomain *clkdm)
 */
 void clkdm_deny_idle(struct clockdomain *clkdm)
 {
+	unsigned long flags;
 	if (!clkdm)
 		return;
@@ -792,11 +815,90 @@ void clkdm_deny_idle(struct clockdomain *clkdm)
 	pr_debug("clockdomain: disabling automatic idle transitions for %s\n",
 		 clkdm->name);
+	spin_lock_irqsave(&clkdm->lock, flags);
+	clkdm->_flags &= ~_CLKDM_FLAG_HWSUP_ENABLED;
 	arch_clkdm->clkdm_deny_idle(clkdm);
+	spin_unlock_irqrestore(&clkdm->lock, flags);
+}
+/**
+ * clkdm_in_hwsup - is clockdomain @clkdm have hardware-supervised idle enabled?
+ * @clkdm: struct clockdomain *
+ *
+ * Returns true if clockdomain @clkdm currently has
+ * hardware-supervised idle enabled, or false if it does not or if
+ * @clkdm is NULL.  It is only valid to call this function after
+ * clkdm_init() has been called.  This function does not actually read
+ * bits from the hardware; it instead tests an in-memory flag that is
+ * changed whenever the clockdomain code changes the auto-idle mode.
+ */
+bool clkdm_in_hwsup(struct clockdomain *clkdm)
+{
+	bool ret;
+	unsigned long flags;
+	if (!clkdm)
+		return false;
+	spin_lock_irqsave(&clkdm->lock, flags);
+	ret = (clkdm->_flags & _CLKDM_FLAG_HWSUP_ENABLED) ? true : false;
+	spin_unlock_irqrestore(&clkdm->lock, flags);
+	return ret;
+}
+/* Clockdomain-to-clock/hwmod framework interface code */
+static int _clkdm_clk_hwmod_enable(struct clockdomain *clkdm)
+{
+	unsigned long flags;
+	if (!clkdm || !arch_clkdm || !arch_clkdm->clkdm_clk_enable)
+		return -EINVAL;
+	/*
+	 * For arch's with no autodeps, clkcm_clk_enable
+	 * should be called for every clock instance or hwmod that is
+	 * enabled, so the clkdm can be force woken up.
+	 */
+	if ((atomic_inc_return(&clkdm->usecount) > 1) && autodeps)
+		return 0;
+	spin_lock_irqsave(&clkdm->lock, flags);
+	arch_clkdm->clkdm_clk_enable(clkdm);
+	pwrdm_wait_transition(clkdm->pwrdm.ptr);
+	pwrdm_clkdm_state_switch(clkdm);
+	spin_unlock_irqrestore(&clkdm->lock, flags);
+	pr_debug("clockdomain: clkdm %s: enabled\n", clkdm->name);
+	return 0;
 }
+static int _clkdm_clk_hwmod_disable(struct clockdomain *clkdm)
+{
+	unsigned long flags;
+	if (!clkdm || !arch_clkdm || !arch_clkdm->clkdm_clk_disable)
+		return -EINVAL;
+	if (atomic_read(&clkdm->usecount) == 0) {
+		WARN_ON(1); /* underflow */
+		return -ERANGE;
+	}
+	if (atomic_dec_return(&clkdm->usecount) > 0)
+		return 0;
+	spin_lock_irqsave(&clkdm->lock, flags);
+	arch_clkdm->clkdm_clk_disable(clkdm);
+	pwrdm_clkdm_state_switch(clkdm);
+	spin_unlock_irqrestore(&clkdm->lock, flags);
-/* Clockdomain-to-clock framework interface code */
+	pr_debug("clockdomain: clkdm %s: disabled\n", clkdm->name);
+	return 0;
+}
 /**
 * clkdm_clk_enable - add an enabled downstream clock to this clkdm
@@ -819,25 +921,10 @@ int clkdm_clk_enable(struct clockdomain *clkdm, struct clk *clk)
 	 * downstream clocks for debugging purposes?
 	 */
-	if (!clkdm || !clk)
+	if (!clk)
 		return -EINVAL;
-	if (!arch_clkdm || !arch_clkdm->clkdm_clk_enable)
+	return _clkdm_clk_hwmod_enable(clkdm);
-		return -EINVAL;
-	if (atomic_inc_return(&clkdm->usecount) > 1)
-		return 0;
-	/* Clockdomain now has one enabled downstream clock */
-	pr_debug("clockdomain: clkdm %s: clk %s now enabled\n", clkdm->name,
-		 clk->name);
-	arch_clkdm->clkdm_clk_enable(clkdm);
-	pwrdm_wait_transition(clkdm->pwrdm.ptr);
-	pwrdm_clkdm_state_switch(clkdm);
-	return 0;
 }
 /**
@@ -850,9 +937,8 @@ int clkdm_clk_enable(struct clockdomain *clkdm, struct clk *clk)
 * clockdomain usecount goes to 0, put the clockdomain to sleep
 * (software-supervised mode) or remove the clkdm autodependencies
 * (hardware-supervised mode).  Returns -EINVAL if passed null
- * pointers; -ERANGE if the @clkdm usecount underflows and debugging
+ * pointers; -ERANGE if the @clkdm usecount underflows; or returns 0
- * is enabled; or returns 0 upon success or if the clockdomain is in
+ * upon success or if the clockdomain is in hwsup idle mode.
- * hwsup idle mode.
 */
 int clkdm_clk_disable(struct clockdomain *clkdm, struct clk *clk)
 {
@@ -861,30 +947,72 @@ int clkdm_clk_disable(struct clockdomain *clkdm, struct clk *clk)
 	 * downstream clocks for debugging purposes?
 	 */
-	if (!clkdm || !clk)
+	if (!clk)
 		return -EINVAL;
-	if (!arch_clkdm || !arch_clkdm->clkdm_clk_disable)
+	return _clkdm_clk_hwmod_disable(clkdm);
+}
+/**
+ * clkdm_hwmod_enable - add an enabled downstream hwmod to this clkdm
+ * @clkdm: struct clockdomain *
+ * @oh: struct omap_hwmod * of the enabled downstream hwmod
+ *
+ * Increment the usecount of the clockdomain @clkdm and ensure that it
+ * is awake before @oh is enabled. Intended to be called by
+ * module_enable() code.
+ * If the clockdomain is in software-supervised idle mode, force the
+ * clockdomain to wake.  If the clockdomain is in hardware-supervised idle
+ * mode, add clkdm-pwrdm autodependencies, to ensure that devices in the
+ * clockdomain can be read from/written to by on-chip processors.
+ * Returns -EINVAL if passed null pointers;
+ * returns 0 upon success or if the clockdomain is in hwsup idle mode.
+ */
+int clkdm_hwmod_enable(struct clockdomain *clkdm, struct omap_hwmod *oh)
+{
+	/* The clkdm attribute does not exist yet prior OMAP4 */
+	if (cpu_is_omap24xx() || cpu_is_omap34xx())
+		return 0;
+	/*
+	 * XXX Rewrite this code to maintain a list of enabled
+	 * downstream hwmods for debugging purposes?
+	 */
+	if (!oh)
 		return -EINVAL;
-#ifdef DEBUG
+	return _clkdm_clk_hwmod_enable(clkdm);
-	if (atomic_read(&clkdm->usecount) == 0) {
+}
-		WARN_ON(1); /* underflow */
-		return -ERANGE;
-	}
-#endif
-	if (atomic_dec_return(&clkdm->usecount) > 0)
+/**
+ * clkdm_hwmod_disable - remove an enabled downstream hwmod from this clkdm
+ * @clkdm: struct clockdomain *
+ * @oh: struct omap_hwmod * of the disabled downstream hwmod
+ *
+ * Decrement the usecount of this clockdomain @clkdm when @oh is
+ * disabled. Intended to be called by module_disable() code.
+ * If the clockdomain usecount goes to 0, put the clockdomain to sleep
+ * (software-supervised mode) or remove the clkdm autodependencies
+ * (hardware-supervised mode).
+ * Returns -EINVAL if passed null pointers; -ERANGE if the @clkdm usecount
+ * underflows; or returns 0 upon success or if the clockdomain is in hwsup
+ * idle mode.
+ */
+int clkdm_hwmod_disable(struct clockdomain *clkdm, struct omap_hwmod *oh)
+{
+	/* The clkdm attribute does not exist yet prior OMAP4 */
+	if (cpu_is_omap24xx() || cpu_is_omap34xx())
 		return 0;
-	/* All downstream clocks of this clockdomain are now disabled */
+	/*
+	 * XXX Rewrite this code to maintain a list of enabled
-	pr_debug("clockdomain: clkdm %s: clk %s now disabled\n", clkdm->name,
+	 * downstream hwmods for debugging purposes?
-		 clk->name);
+	 */
-	arch_clkdm->clkdm_clk_disable(clkdm);
+	if (!oh)
-	pwrdm_clkdm_state_switch(clkdm);
+		return -EINVAL;
-	return 0;
+	return _clkdm_clk_hwmod_disable(clkdm);
 }
--- a/arch/arm/mach-omap2/clockdomain.h
+++ b/arch/arm/mach-omap2/clockdomain.h
@@ -17,9 +17,11 @@
 #define __ARCH_ARM_MACH_OMAP2_CLOCKDOMAIN_H
 #include <linux/init.h>
+#include <linux/spinlock.h>
 #include "powerdomain.h"
 #include <plat/clock.h>
+#include <plat/omap_hwmod.h>
 #include <plat/cpu.h>
 /*
@@ -82,6 +84,9 @@ struct clkdm_dep {
 	const struct omap_chip_id omap_chip;
 };
+/* Possible flags for struct clockdomain._flags */
+#define _CLKDM_FLAG_HWSUP_ENABLED		BIT(0)
 /**
 * struct clockdomain - OMAP clockdomain
 * @name: clockdomain name
@@ -89,6 +94,7 @@ struct clkdm_dep {
 * @clktrctrl_reg: CLKSTCTRL reg for the given clock domain
 * @clktrctrl_mask: CLKTRCTRL/AUTOSTATE field mask in CM_CLKSTCTRL reg
 * @flags: Clockdomain capability flags
+ * @_flags: Flags for use only by internal clockdomain code
 * @dep_bit: Bit shift of this clockdomain's PM_WKDEP/CM_SLEEPDEP bit
 * @prcm_partition: (OMAP4 only) PRCM partition ID for this clkdm's registers
 * @cm_inst: (OMAP4 only) CM instance register offset
@@ -113,6 +119,7 @@ struct clockdomain {
 	} pwrdm;
 	const u16 clktrctrl_mask;
 	const u8 flags;
+	u8 _flags;
 	const u8 dep_bit;
 	const u8 prcm_partition;
 	const s16 cm_inst;
@@ -122,6 +129,7 @@ struct clockdomain {
 	const struct omap_chip_id omap_chip;
 	atomic_t usecount;
 	struct list_head node;
+	spinlock_t lock;
 };
 /**
@@ -177,12 +185,15 @@ int clkdm_clear_all_sleepdeps(struct clockdomain *clkdm);
 void clkdm_allow_idle(struct clockdomain *clkdm);
 void clkdm_deny_idle(struct clockdomain *clkdm);
+bool clkdm_in_hwsup(struct clockdomain *clkdm);
 int clkdm_wakeup(struct clockdomain *clkdm);
 int clkdm_sleep(struct clockdomain *clkdm);
 int clkdm_clk_enable(struct clockdomain *clkdm, struct clk *clk);
 int clkdm_clk_disable(struct clockdomain *clkdm, struct clk *clk);
+int clkdm_hwmod_enable(struct clockdomain *clkdm, struct omap_hwmod *oh);
+int clkdm_hwmod_disable(struct clockdomain *clkdm, struct omap_hwmod *oh);
 extern void __init omap2xxx_clockdomains_init(void);
 extern void __init omap3xxx_clockdomains_init(void);

--- a/arch/arm/mach-omap2/clockdomain2xxx_3xxx.c
+++ b/arch/arm/mach-omap2/clockdomain2xxx_3xxx.c
@@ -183,7 +183,8 @@ static int omap2_clkdm_clk_enable(struct clockdomain *clkdm)
 		_clkdm_add_autodeps(clkdm);
 		_enable_hwsup(clkdm);
 	} else {
-		clkdm_wakeup(clkdm);
+		if (clkdm->flags & CLKDM_CAN_FORCE_WAKEUP)
+			omap2_clkdm_wakeup(clkdm);
 	}
 	return 0;
@@ -205,7 +206,8 @@ static int omap2_clkdm_clk_disable(struct clockdomain *clkdm)
 		_clkdm_del_autodeps(clkdm);
 		_enable_hwsup(clkdm);
 	} else {
-		clkdm_sleep(clkdm);
+		if (clkdm->flags & CLKDM_CAN_FORCE_SLEEP)
+			omap2_clkdm_sleep(clkdm);
 	}
 	return 0;

--- a/arch/arm/mach-omap2/clockdomain44xx.c
+++ b/arch/arm/mach-omap2/clockdomain44xx.c
@@ -95,13 +95,8 @@ static void omap4_clkdm_deny_idle(struct clockdomain *clkdm)
 static int omap4_clkdm_clk_enable(struct clockdomain *clkdm)
 {
-	bool hwsup = false;
+	if (clkdm->flags & CLKDM_CAN_FORCE_WAKEUP)
+		return omap4_clkdm_wakeup(clkdm);
-	hwsup = omap4_cminst_is_clkdm_in_hwsup(clkdm->prcm_partition,
-					clkdm->cm_inst, clkdm->clkdm_offs);
-	if (!hwsup)
-		clkdm_wakeup(clkdm);
 	return 0;
 }
@@ -113,8 +108,8 @@ static int omap4_clkdm_clk_disable(struct clockdomain *clkdm)
 	hwsup = omap4_cminst_is_clkdm_in_hwsup(clkdm->prcm_partition,
 					clkdm->cm_inst, clkdm->clkdm_offs);
-	if (!hwsup)
+	if (!hwsup && (clkdm->flags & CLKDM_CAN_FORCE_SLEEP))
-		clkdm_sleep(clkdm);
+		omap4_clkdm_sleep(clkdm);
 	return 0;
 }

--- a/arch/arm/mach-omap2/clockdomains44xx_data.c
+++ b/arch/arm/mach-omap2/clockdomains44xx_data.c
 /*
 * OMAP4 Clock domains framework
 *
- * Copyright (C) 2009 Texas Instruments, Inc.
+ * Copyright (C) 2009-2011 Texas Instruments, Inc.
- * Copyright (C) 2009 Nokia Corporation
+ * Copyright (C) 2009-2011 Nokia Corporation
 *
 * Abhijit Pagare (abhijitpagare@ti.com)
 * Benoit Cousson (b-cousson@ti.com)
+ * Paul Walmsley (paul@pwsan.com)
 *
 * This file is automatically generated from the OMAP hardware databases.
 * We respectfully ask that any modifications to this file be coordinated
@@ -32,7 +33,7 @@
 /* Static Dependencies for OMAP4 Clock Domains */
-static struct clkdm_dep ducati_wkup_sleep_deps[] = {
+static struct clkdm_dep d2d_wkup_sleep_deps[] = {
 	{
 		.clkdm_name	 = "abe_clkdm",
 		.omap_chip	 = OMAP_CHIP_INIT(CHIP_IS_OMAP4430)
@@ -50,103 +51,103 @@ static struct clkdm_dep ducati_wkup_sleep_deps[] = {
 		.omap_chip	 = OMAP_CHIP_INIT(CHIP_IS_OMAP4430)
 	},
 	{
-		.clkdm_name	 = "l3_dss_clkdm",
+		.clkdm_name	 = "l3_emif_clkdm",
 		.omap_chip	 = OMAP_CHIP_INIT(CHIP_IS_OMAP4430)
 	},
 	{
-		.clkdm_name	 = "l3_emif_clkdm",
+		.clkdm_name	 = "l3_init_clkdm",
 		.omap_chip	 = OMAP_CHIP_INIT(CHIP_IS_OMAP4430)
 	},
 	{
-		.clkdm_name	 = "l3_gfx_clkdm",
+		.clkdm_name	 = "l4_cfg_clkdm",
 		.omap_chip	 = OMAP_CHIP_INIT(CHIP_IS_OMAP4430)
 	},
 	{
-		.clkdm_name	 = "l3_init_clkdm",
+		.clkdm_name	 = "l4_per_clkdm",
 		.omap_chip	 = OMAP_CHIP_INIT(CHIP_IS_OMAP4430)
 	},
+	{ NULL },
+};
+static struct clkdm_dep ducati_wkup_sleep_deps[] = {
 	{
-		.clkdm_name	 = "l4_cfg_clkdm",
+		.clkdm_name	 = "abe_clkdm",
 		.omap_chip	 = OMAP_CHIP_INIT(CHIP_IS_OMAP4430)
 	},
 	{
-		.clkdm_name	 = "l4_per_clkdm",
+		.clkdm_name	 = "ivahd_clkdm",
 		.omap_chip	 = OMAP_CHIP_INIT(CHIP_IS_OMAP4430)
 	},
 	{
-		.clkdm_name	 = "l4_secure_clkdm",
+		.clkdm_name	 = "l3_1_clkdm",
 		.omap_chip	 = OMAP_CHIP_INIT(CHIP_IS_OMAP4430)
 	},
 	{
-		.clkdm_name	 = "l4_wkup_clkdm",
+		.clkdm_name	 = "l3_2_clkdm",
 		.omap_chip	 = OMAP_CHIP_INIT(CHIP_IS_OMAP4430)
 	},
 	{
-		.clkdm_name	 = "tesla_clkdm",
+		.clkdm_name	 = "l3_dss_clkdm",
 		.omap_chip	 = OMAP_CHIP_INIT(CHIP_IS_OMAP4430)
 	},
-	{ NULL },
-};
-static struct clkdm_dep iss_wkup_sleep_deps[] = {
 	{
-		.clkdm_name	 = "ivahd_clkdm",
+		.clkdm_name	 = "l3_emif_clkdm",
 		.omap_chip	 = OMAP_CHIP_INIT(CHIP_IS_OMAP4430)
 	},
 	{
-		.clkdm_name	 = "l3_1_clkdm",
+		.clkdm_name	 = "l3_gfx_clkdm",
 		.omap_chip	 = OMAP_CHIP_INIT(CHIP_IS_OMAP4430)
 	},
 	{
-		.clkdm_name	 = "l3_emif_clkdm",
+		.clkdm_name	 = "l3_init_clkdm",
 		.omap_chip	 = OMAP_CHIP_INIT(CHIP_IS_OMAP4430)
 	},
-	{ NULL },
-};
-static struct clkdm_dep ivahd_wkup_sleep_deps[] = {
 	{
-		.clkdm_name	 = "l3_1_clkdm",
+		.clkdm_name	 = "l4_cfg_clkdm",
 		.omap_chip	 = OMAP_CHIP_INIT(CHIP_IS_OMAP4430)
 	},
 	{
-		.clkdm_name	 = "l3_emif_clkdm",
+		.clkdm_name	 = "l4_per_clkdm",
 		.omap_chip	 = OMAP_CHIP_INIT(CHIP_IS_OMAP4430)
 	},
-	{ NULL },
-};
-static struct clkdm_dep l3_d2d_wkup_sleep_deps[] = {
 	{
-		.clkdm_name	 = "abe_clkdm",
+		.clkdm_name	 = "l4_secure_clkdm",
 		.omap_chip	 = OMAP_CHIP_INIT(CHIP_IS_OMAP4430)
 	},
 	{
-		.clkdm_name	 = "ivahd_clkdm",
+		.clkdm_name	 = "l4_wkup_clkdm",
 		.omap_chip	 = OMAP_CHIP_INIT(CHIP_IS_OMAP4430)
 	},
 	{
-		.clkdm_name	 = "l3_1_clkdm",
+		.clkdm_name	 = "tesla_clkdm",
 		.omap_chip	 = OMAP_CHIP_INIT(CHIP_IS_OMAP4430)
 	},
+	{ NULL },
+};
+static struct clkdm_dep iss_wkup_sleep_deps[] = {
 	{
-		.clkdm_name	 = "l3_2_clkdm",
+		.clkdm_name	 = "ivahd_clkdm",
 		.omap_chip	 = OMAP_CHIP_INIT(CHIP_IS_OMAP4430)
 	},
 	{
-		.clkdm_name	 = "l3_emif_clkdm",
+		.clkdm_name	 = "l3_1_clkdm",
 		.omap_chip	 = OMAP_CHIP_INIT(CHIP_IS_OMAP4430)
 	},
 	{
-		.clkdm_name	 = "l3_init_clkdm",
+		.clkdm_name	 = "l3_emif_clkdm",
 		.omap_chip	 = OMAP_CHIP_INIT(CHIP_IS_OMAP4430)
 	},
+	{ NULL },
+};
+static struct clkdm_dep ivahd_wkup_sleep_deps[] = {
 	{
-		.clkdm_name	 = "l4_cfg_clkdm",
+		.clkdm_name	 = "l3_1_clkdm",
 		.omap_chip	 = OMAP_CHIP_INIT(CHIP_IS_OMAP4430)
 	},
 	{
-		.clkdm_name	 = "l4_per_clkdm",
+		.clkdm_name	 = "l3_emif_clkdm",
 		.omap_chip	 = OMAP_CHIP_INIT(CHIP_IS_OMAP4430)
 	},
 	{ NULL },
@@ -280,7 +281,7 @@ static struct clkdm_dep l4_secure_wkup_sleep_deps[] = {
 	{ NULL },
 };
-static struct clkdm_dep mpuss_wkup_sleep_deps[] = {
+static struct clkdm_dep mpu_wkup_sleep_deps[] = {
 	{
 		.clkdm_name	 = "abe_clkdm",
 		.omap_chip	 = OMAP_CHIP_INIT(CHIP_IS_OMAP4430)
@@ -497,14 +498,14 @@ static struct clockdomain l3_init_44xx_clkdm = {
 	.omap_chip	  = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
 };
-static struct clockdomain mpuss_44xx_clkdm = {
+static struct clockdomain d2d_44xx_clkdm = {
-	.name		  = "mpuss_clkdm",
+	.name		  = "d2d_clkdm",
-	.pwrdm		  = { .name = "mpu_pwrdm" },
+	.pwrdm		  = { .name = "core_pwrdm" },
-	.prcm_partition	  = OMAP4430_CM1_PARTITION,
+	.prcm_partition	  = OMAP4430_CM2_PARTITION,
-	.cm_inst	  = OMAP4430_CM1_MPU_INST,
+	.cm_inst	  = OMAP4430_CM2_CORE_INST,
-	.clkdm_offs	  = OMAP4430_CM1_MPU_MPU_CDOFFS,
+	.clkdm_offs	  = OMAP4430_CM2_CORE_D2D_CDOFFS,
-	.wkdep_srcs	  = mpuss_wkup_sleep_deps,
+	.wkdep_srcs	  = d2d_wkup_sleep_deps,
-	.sleepdep_srcs	  = mpuss_wkup_sleep_deps,
+	.sleepdep_srcs	  = d2d_wkup_sleep_deps,
 	.flags		  = CLKDM_CAN_FORCE_WAKEUP | CLKDM_CAN_HWSUP,
 	.omap_chip	  = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
 };
@@ -563,6 +564,18 @@ static struct clockdomain ducati_44xx_clkdm = {
 	.omap_chip	  = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
 };
+static struct clockdomain mpu_44xx_clkdm = {
+	.name		  = "mpuss_clkdm",
+	.pwrdm		  = { .name = "mpu_pwrdm" },
+	.prcm_partition	  = OMAP4430_CM1_PARTITION,
+	.cm_inst	  = OMAP4430_CM1_MPU_INST,
+	.clkdm_offs	  = OMAP4430_CM1_MPU_MPU_CDOFFS,
+	.wkdep_srcs	  = mpu_wkup_sleep_deps,
+	.sleepdep_srcs	  = mpu_wkup_sleep_deps,
+	.flags		  = CLKDM_CAN_FORCE_WAKEUP | CLKDM_CAN_HWSUP,
+	.omap_chip	  = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
+};
 static struct clockdomain l3_2_44xx_clkdm = {
 	.name		  = "l3_2_clkdm",
 	.pwrdm		  = { .name = "core_pwrdm" },
@@ -585,18 +598,6 @@ static struct clockdomain l3_1_44xx_clkdm = {
 	.omap_chip	  = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
 };
-static struct clockdomain l3_d2d_44xx_clkdm = {
-	.name		  = "l3_d2d_clkdm",
-	.pwrdm		  = { .name = "core_pwrdm" },
-	.prcm_partition	  = OMAP4430_CM2_PARTITION,
-	.cm_inst	  = OMAP4430_CM2_CORE_INST,
-	.clkdm_offs	  = OMAP4430_CM2_CORE_D2D_CDOFFS,
-	.wkdep_srcs	  = l3_d2d_wkup_sleep_deps,
-	.sleepdep_srcs	  = l3_d2d_wkup_sleep_deps,
-	.flags		  = CLKDM_CAN_FORCE_WAKEUP | CLKDM_CAN_HWSUP,
-	.omap_chip	  = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
-};
 static struct clockdomain iss_44xx_clkdm = {
 	.name		  = "iss_clkdm",
 	.pwrdm		  = { .name = "cam_pwrdm" },
@@ -655,6 +656,7 @@ static struct clockdomain l3_dma_44xx_clkdm = {
 	.omap_chip	  = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
 };
+/* As clockdomains are added or removed above, this list must also be changed */
 static struct clockdomain *clockdomains_omap44xx[] __initdata = {
 	&l4_cefuse_44xx_clkdm,
 	&l4_cfg_44xx_clkdm,
@@ -666,21 +668,21 @@ static struct clockdomain *clockdomains_omap44xx[] __initdata = {
 	&abe_44xx_clkdm,
 	&l3_instr_44xx_clkdm,
 	&l3_init_44xx_clkdm,
-	&mpuss_44xx_clkdm,
+	&d2d_44xx_clkdm,
 	&mpu0_44xx_clkdm,
 	&mpu1_44xx_clkdm,
 	&l3_emif_44xx_clkdm,
 	&l4_ao_44xx_clkdm,
 	&ducati_44xx_clkdm,
+	&mpu_44xx_clkdm,
 	&l3_2_44xx_clkdm,
 	&l3_1_44xx_clkdm,
-	&l3_d2d_44xx_clkdm,
 	&iss_44xx_clkdm,
 	&l3_dss_44xx_clkdm,
 	&l4_wkup_44xx_clkdm,
 	&emu_sys_44xx_clkdm,
 	&l3_dma_44xx_clkdm,
-	NULL,
+	NULL
 };
 void __init omap44xx_clockdomains_init(void)

--- a/arch/arm/mach-omap2/cm-regbits-44xx.h
+++ b/arch/arm/mach-omap2/cm-regbits-44xx.h
--- a/arch/arm/mach-omap2/cm1_44xx.h
+++ b/arch/arm/mach-omap2/cm1_44xx.h
 /*
 * OMAP44xx CM1 instance offset macros
 *
- * Copyright (C) 2009-2010 Texas Instruments, Inc.
+ * Copyright (C) 2009-2011 Texas Instruments, Inc.
 * Copyright (C) 2009-2010 Nokia Corporation
 *
 * Paul Walmsley (paul@pwsan.com)
@@ -41,9 +41,9 @@
 #define OMAP4430_CM1_INSTR_INST		0x0f00
 /* CM1 clockdomain register offsets (from instance start) */
-#define OMAP4430_CM1_ABE_ABE_CDOFFS		0x0000
+#define OMAP4430_CM1_MPU_MPU_CDOFFS	0x0000
-#define OMAP4430_CM1_MPU_MPU_CDOFFS		0x0000
+#define OMAP4430_CM1_TESLA_TESLA_CDOFFS	0x0000
-#define OMAP4430_CM1_TESLA_TESLA_CDOFFS		0x0000
+#define OMAP4430_CM1_ABE_ABE_CDOFFS	0x0000
 /* CM1 */
@@ -82,8 +82,8 @@
 #define OMAP4430_CM_DIV_M7_DPLL_CORE			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_INST, 0x0044)
 #define OMAP4_CM_SSC_DELTAMSTEP_DPLL_CORE_OFFSET	0x0048
 #define OMAP4430_CM_SSC_DELTAMSTEP_DPLL_CORE		OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_INST, 0x0048)
-#define OMAP4_CM_SSC_INSTFREQDIV_DPLL_CORE_OFFSET	0x004c
+#define OMAP4_CM_SSC_MODFREQDIV_DPLL_CORE_OFFSET	0x004c
-#define OMAP4430_CM_SSC_INSTFREQDIV_DPLL_CORE		OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_INST, 0x004c)
+#define OMAP4430_CM_SSC_MODFREQDIV_DPLL_CORE		OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_INST, 0x004c)
 #define OMAP4_CM_EMU_OVERRIDE_DPLL_CORE_OFFSET		0x0050
 #define OMAP4430_CM_EMU_OVERRIDE_DPLL_CORE		OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_INST, 0x0050)
 #define OMAP4_CM_CLKMODE_DPLL_MPU_OFFSET		0x0060
@@ -98,8 +98,8 @@
 #define OMAP4430_CM_DIV_M2_DPLL_MPU			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_INST, 0x0070)
 #define OMAP4_CM_SSC_DELTAMSTEP_DPLL_MPU_OFFSET		0x0088
 #define OMAP4430_CM_SSC_DELTAMSTEP_DPLL_MPU		OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_INST, 0x0088)
-#define OMAP4_CM_SSC_INSTFREQDIV_DPLL_MPU_OFFSET		0x008c
+#define OMAP4_CM_SSC_MODFREQDIV_DPLL_MPU_OFFSET		0x008c
-#define OMAP4430_CM_SSC_INSTFREQDIV_DPLL_MPU		OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_INST, 0x008c)
+#define OMAP4430_CM_SSC_MODFREQDIV_DPLL_MPU		OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_INST, 0x008c)
 #define OMAP4_CM_BYPCLK_DPLL_MPU_OFFSET			0x009c
 #define OMAP4430_CM_BYPCLK_DPLL_MPU			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_INST, 0x009c)
 #define OMAP4_CM_CLKMODE_DPLL_IVA_OFFSET		0x00a0
@@ -116,8 +116,8 @@
 #define OMAP4430_CM_DIV_M5_DPLL_IVA			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_INST, 0x00bc)
 #define OMAP4_CM_SSC_DELTAMSTEP_DPLL_IVA_OFFSET		0x00c8
 #define OMAP4430_CM_SSC_DELTAMSTEP_DPLL_IVA		OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_INST, 0x00c8)
-#define OMAP4_CM_SSC_INSTFREQDIV_DPLL_IVA_OFFSET		0x00cc
+#define OMAP4_CM_SSC_MODFREQDIV_DPLL_IVA_OFFSET		0x00cc
-#define OMAP4430_CM_SSC_INSTFREQDIV_DPLL_IVA		OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_INST, 0x00cc)
+#define OMAP4430_CM_SSC_MODFREQDIV_DPLL_IVA		OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_INST, 0x00cc)
 #define OMAP4_CM_BYPCLK_DPLL_IVA_OFFSET			0x00dc
 #define OMAP4430_CM_BYPCLK_DPLL_IVA			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_INST, 0x00dc)
 #define OMAP4_CM_CLKMODE_DPLL_ABE_OFFSET		0x00e0
@@ -134,8 +134,8 @@
 #define OMAP4430_CM_DIV_M3_DPLL_ABE			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_INST, 0x00f4)
 #define OMAP4_CM_SSC_DELTAMSTEP_DPLL_ABE_OFFSET		0x0108
 #define OMAP4430_CM_SSC_DELTAMSTEP_DPLL_ABE		OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_INST, 0x0108)
-#define OMAP4_CM_SSC_INSTFREQDIV_DPLL_ABE_OFFSET		0x010c
+#define OMAP4_CM_SSC_MODFREQDIV_DPLL_ABE_OFFSET		0x010c
-#define OMAP4430_CM_SSC_INSTFREQDIV_DPLL_ABE		OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_INST, 0x010c)
+#define OMAP4430_CM_SSC_MODFREQDIV_DPLL_ABE		OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_INST, 0x010c)
 #define OMAP4_CM_CLKMODE_DPLL_DDRPHY_OFFSET		0x0120
 #define OMAP4430_CM_CLKMODE_DPLL_DDRPHY			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_INST, 0x0120)
 #define OMAP4_CM_IDLEST_DPLL_DDRPHY_OFFSET		0x0124
@@ -154,8 +154,8 @@
 #define OMAP4430_CM_DIV_M6_DPLL_DDRPHY			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_INST, 0x0140)
 #define OMAP4_CM_SSC_DELTAMSTEP_DPLL_DDRPHY_OFFSET	0x0148
 #define OMAP4430_CM_SSC_DELTAMSTEP_DPLL_DDRPHY		OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_INST, 0x0148)
-#define OMAP4_CM_SSC_INSTFREQDIV_DPLL_DDRPHY_OFFSET	0x014c
+#define OMAP4_CM_SSC_MODFREQDIV_DPLL_DDRPHY_OFFSET	0x014c
-#define OMAP4430_CM_SSC_INSTFREQDIV_DPLL_DDRPHY		OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_INST, 0x014c)
+#define OMAP4430_CM_SSC_MODFREQDIV_DPLL_DDRPHY		OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_INST, 0x014c)
 #define OMAP4_CM_SHADOW_FREQ_CONFIG1_OFFSET		0x0160
 #define OMAP4430_CM_SHADOW_FREQ_CONFIG1			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_INST, 0x0160)
 #define OMAP4_CM_SHADOW_FREQ_CONFIG2_OFFSET		0x0164
@@ -217,42 +217,6 @@
 #define OMAP4_CM1_ABE_WDT3_CLKCTRL_OFFSET		0x0088
 #define OMAP4430_CM1_ABE_WDT3_CLKCTRL			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_ABE_INST, 0x0088)
-/* CM1.RESTORE_CM1 register offsets */
-#define OMAP4_CM_CLKSEL_CORE_RESTORE_OFFSET		0x0000
-#define OMAP4430_CM_CLKSEL_CORE_RESTORE			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_RESTORE_INST, 0x0000)
-#define OMAP4_CM_DIV_M2_DPLL_CORE_RESTORE_OFFSET	0x0004
-#define OMAP4430_CM_DIV_M2_DPLL_CORE_RESTORE		OMAP44XX_CM1_REGADDR(OMAP4430_CM1_RESTORE_INST, 0x0004)
-#define OMAP4_CM_DIV_M3_DPLL_CORE_RESTORE_OFFSET	0x0008
-#define OMAP4430_CM_DIV_M3_DPLL_CORE_RESTORE		OMAP44XX_CM1_REGADDR(OMAP4430_CM1_RESTORE_INST, 0x0008)
-#define OMAP4_CM_DIV_M4_DPLL_CORE_RESTORE_OFFSET	0x000c
-#define OMAP4430_CM_DIV_M4_DPLL_CORE_RESTORE		OMAP44XX_CM1_REGADDR(OMAP4430_CM1_RESTORE_INST, 0x000c)
-#define OMAP4_CM_DIV_M5_DPLL_CORE_RESTORE_OFFSET	0x0010
-#define OMAP4430_CM_DIV_M5_DPLL_CORE_RESTORE		OMAP44XX_CM1_REGADDR(OMAP4430_CM1_RESTORE_INST, 0x0010)
-#define OMAP4_CM_DIV_M6_DPLL_CORE_RESTORE_OFFSET	0x0014
-#define OMAP4430_CM_DIV_M6_DPLL_CORE_RESTORE		OMAP44XX_CM1_REGADDR(OMAP4430_CM1_RESTORE_INST, 0x0014)
-#define OMAP4_CM_DIV_M7_DPLL_CORE_RESTORE_OFFSET	0x0018
-#define OMAP4430_CM_DIV_M7_DPLL_CORE_RESTORE		OMAP44XX_CM1_REGADDR(OMAP4430_CM1_RESTORE_INST, 0x0018)
-#define OMAP4_CM_CLKSEL_DPLL_CORE_RESTORE_OFFSET	0x001c
-#define OMAP4430_CM_CLKSEL_DPLL_CORE_RESTORE		OMAP44XX_CM1_REGADDR(OMAP4430_CM1_RESTORE_INST, 0x001c)
-#define OMAP4_CM_SSC_DELTAMSTEP_DPLL_CORE_RESTORE_OFFSET	0x0020
-#define OMAP4430_CM_SSC_DELTAMSTEP_DPLL_CORE_RESTORE	OMAP44XX_CM1_REGADDR(OMAP4430_CM1_RESTORE_INST, 0x0020)
-#define OMAP4_CM_SSC_INSTFREQDIV_DPLL_CORE_RESTORE_OFFSET	0x0024
-#define OMAP4430_CM_SSC_INSTFREQDIV_DPLL_CORE_RESTORE	OMAP44XX_CM1_REGADDR(OMAP4430_CM1_RESTORE_INST, 0x0024)
-#define OMAP4_CM_CLKMODE_DPLL_CORE_RESTORE_OFFSET	0x0028
-#define OMAP4430_CM_CLKMODE_DPLL_CORE_RESTORE		OMAP44XX_CM1_REGADDR(OMAP4430_CM1_RESTORE_INST, 0x0028)
-#define OMAP4_CM_SHADOW_FREQ_CONFIG2_RESTORE_OFFSET	0x002c
-#define OMAP4430_CM_SHADOW_FREQ_CONFIG2_RESTORE		OMAP44XX_CM1_REGADDR(OMAP4430_CM1_RESTORE_INST, 0x002c)
-#define OMAP4_CM_SHADOW_FREQ_CONFIG1_RESTORE_OFFSET	0x0030
-#define OMAP4430_CM_SHADOW_FREQ_CONFIG1_RESTORE		OMAP44XX_CM1_REGADDR(OMAP4430_CM1_RESTORE_INST, 0x0030)
-#define OMAP4_CM_AUTOIDLE_DPLL_CORE_RESTORE_OFFSET	0x0034
-#define OMAP4430_CM_AUTOIDLE_DPLL_CORE_RESTORE		OMAP44XX_CM1_REGADDR(OMAP4430_CM1_RESTORE_INST, 0x0034)
-#define OMAP4_CM_MPU_CLKSTCTRL_RESTORE_OFFSET		0x0038
-#define OMAP4430_CM_MPU_CLKSTCTRL_RESTORE		OMAP44XX_CM1_REGADDR(OMAP4430_CM1_RESTORE_INST, 0x0038)
-#define OMAP4_CM_CM1_PROFILING_CLKCTRL_RESTORE_OFFSET	0x003c
-#define OMAP4430_CM_CM1_PROFILING_CLKCTRL_RESTORE	OMAP44XX_CM1_REGADDR(OMAP4430_CM1_RESTORE_INST, 0x003c)
-#define OMAP4_CM_DYN_DEP_PRESCAL_RESTORE_OFFSET		0x0040
-#define OMAP4430_CM_DYN_DEP_PRESCAL_RESTORE		OMAP44XX_CM1_REGADDR(OMAP4430_CM1_RESTORE_INST, 0x0040)
 /* Function prototypes */
 extern u32 omap4_cm1_read_inst_reg(s16 inst, u16 idx);
 extern void omap4_cm1_write_inst_reg(u32 val, s16 inst, u16 idx);

--- a/arch/arm/mach-omap2/cm2_44xx.h
+++ b/arch/arm/mach-omap2/cm2_44xx.h
 /*
 * OMAP44xx CM2 instance offset macros
 *
- * Copyright (C) 2009-2010 Texas Instruments, Inc.
+ * Copyright (C) 2009-2011 Texas Instruments, Inc.
 * Copyright (C) 2009-2010 Nokia Corporation
 *
 * Paul Walmsley (paul@pwsan.com)
@@ -40,9 +40,9 @@
 #define OMAP4430_CM2_CAM_INST		0x1000
 #define OMAP4430_CM2_DSS_INST		0x1100
 #define OMAP4430_CM2_GFX_INST		0x1200
-#define OMAP4430_CM2_L3INIT_INST		0x1300
+#define OMAP4430_CM2_L3INIT_INST	0x1300
 #define OMAP4430_CM2_L4PER_INST		0x1400
-#define OMAP4430_CM2_CEFUSE_INST		0x1600
+#define OMAP4430_CM2_CEFUSE_INST	0x1600
 #define OMAP4430_CM2_RESTORE_INST	0x1e00
 #define OMAP4430_CM2_INSTR_INST		0x1f00
@@ -65,7 +65,6 @@
 #define OMAP4430_CM2_L4PER_L4SEC_CDOFFS		0x0180
 #define OMAP4430_CM2_CEFUSE_CEFUSE_CDOFFS	0x0000
 /* CM2 */
 /* CM2.OCP_SOCKET_CM2 register offsets */
@@ -121,8 +120,8 @@
 #define OMAP4430_CM_DIV_M7_DPLL_PER			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_INST, 0x0064)
 #define OMAP4_CM_SSC_DELTAMSTEP_DPLL_PER_OFFSET		0x0068
 #define OMAP4430_CM_SSC_DELTAMSTEP_DPLL_PER		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_INST, 0x0068)
-#define OMAP4_CM_SSC_INSTFREQDIV_DPLL_PER_OFFSET		0x006c
+#define OMAP4_CM_SSC_MODFREQDIV_DPLL_PER_OFFSET		0x006c
-#define OMAP4430_CM_SSC_INSTFREQDIV_DPLL_PER		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_INST, 0x006c)
+#define OMAP4430_CM_SSC_MODFREQDIV_DPLL_PER		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_INST, 0x006c)
 #define OMAP4_CM_CLKMODE_DPLL_USB_OFFSET		0x0080
 #define OMAP4430_CM_CLKMODE_DPLL_USB			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_INST, 0x0080)
 #define OMAP4_CM_IDLEST_DPLL_USB_OFFSET			0x0084
@@ -135,8 +134,8 @@
 #define OMAP4430_CM_DIV_M2_DPLL_USB			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_INST, 0x0090)
 #define OMAP4_CM_SSC_DELTAMSTEP_DPLL_USB_OFFSET		0x00a8
 #define OMAP4430_CM_SSC_DELTAMSTEP_DPLL_USB		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_INST, 0x00a8)
-#define OMAP4_CM_SSC_INSTFREQDIV_DPLL_USB_OFFSET		0x00ac
+#define OMAP4_CM_SSC_MODFREQDIV_DPLL_USB_OFFSET		0x00ac
-#define OMAP4430_CM_SSC_INSTFREQDIV_DPLL_USB		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_INST, 0x00ac)
+#define OMAP4430_CM_SSC_MODFREQDIV_DPLL_USB		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_INST, 0x00ac)
 #define OMAP4_CM_CLKDCOLDO_DPLL_USB_OFFSET		0x00b4
 #define OMAP4430_CM_CLKDCOLDO_DPLL_USB			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_INST, 0x00b4)
 #define OMAP4_CM_CLKMODE_DPLL_UNIPRO_OFFSET		0x00c0
@@ -151,8 +150,8 @@
 #define OMAP4430_CM_DIV_M2_DPLL_UNIPRO			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_INST, 0x00d0)
 #define OMAP4_CM_SSC_DELTAMSTEP_DPLL_UNIPRO_OFFSET	0x00e8
 #define OMAP4430_CM_SSC_DELTAMSTEP_DPLL_UNIPRO		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_INST, 0x00e8)
-#define OMAP4_CM_SSC_INSTFREQDIV_DPLL_UNIPRO_OFFSET	0x00ec
+#define OMAP4_CM_SSC_MODFREQDIV_DPLL_UNIPRO_OFFSET	0x00ec
-#define OMAP4430_CM_SSC_INSTFREQDIV_DPLL_UNIPRO		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_INST, 0x00ec)
+#define OMAP4430_CM_SSC_MODFREQDIV_DPLL_UNIPRO		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_INST, 0x00ec)
 /* CM2.ALWAYS_ON_CM2 register offsets */
 #define OMAP4_CM_ALWON_CLKSTCTRL_OFFSET			0x0000
@@ -227,8 +226,8 @@
 #define OMAP4430_CM_D2D_DYNAMICDEP			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_INST, 0x0508)
 #define OMAP4_CM_D2D_SAD2D_CLKCTRL_OFFSET		0x0520
 #define OMAP4430_CM_D2D_SAD2D_CLKCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_INST, 0x0520)
-#define OMAP4_CM_D2D_INSTEM_ICR_CLKCTRL_OFFSET		0x0528
+#define OMAP4_CM_D2D_MODEM_ICR_CLKCTRL_OFFSET		0x0528
-#define OMAP4430_CM_D2D_INSTEM_ICR_CLKCTRL		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_INST, 0x0528)
+#define OMAP4430_CM_D2D_MODEM_ICR_CLKCTRL		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_INST, 0x0528)
 #define OMAP4_CM_D2D_SAD2D_FW_CLKCTRL_OFFSET		0x0530
 #define OMAP4430_CM_D2D_SAD2D_FW_CLKCTRL		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_INST, 0x0530)
 #define OMAP4_CM_L4CFG_CLKSTCTRL_OFFSET			0x0600
@@ -450,56 +449,6 @@
 #define OMAP4_CM_CEFUSE_CEFUSE_CLKCTRL_OFFSET		0x0020
 #define OMAP4430_CM_CEFUSE_CEFUSE_CLKCTRL		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CEFUSE_INST, 0x0020)
-/* CM2.RESTORE_CM2 register offsets */
-#define OMAP4_CM_L3_1_CLKSTCTRL_RESTORE_OFFSET		0x0000
-#define OMAP4430_CM_L3_1_CLKSTCTRL_RESTORE		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_RESTORE_INST, 0x0000)
-#define OMAP4_CM_L3_2_CLKSTCTRL_RESTORE_OFFSET		0x0004
-#define OMAP4430_CM_L3_2_CLKSTCTRL_RESTORE		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_RESTORE_INST, 0x0004)
-#define OMAP4_CM_L4CFG_CLKSTCTRL_RESTORE_OFFSET		0x0008
-#define OMAP4430_CM_L4CFG_CLKSTCTRL_RESTORE		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_RESTORE_INST, 0x0008)
-#define OMAP4_CM_MEMIF_CLKSTCTRL_RESTORE_OFFSET		0x000c
-#define OMAP4430_CM_MEMIF_CLKSTCTRL_RESTORE		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_RESTORE_INST, 0x000c)
-#define OMAP4_CM_L4PER_CLKSTCTRL_RESTORE_OFFSET		0x0010
-#define OMAP4430_CM_L4PER_CLKSTCTRL_RESTORE		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_RESTORE_INST, 0x0010)
-#define OMAP4_CM_L3INIT_CLKSTCTRL_RESTORE_OFFSET	0x0014
-#define OMAP4430_CM_L3INIT_CLKSTCTRL_RESTORE		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_RESTORE_INST, 0x0014)
-#define OMAP4_CM_L3INSTR_L3_3_CLKCTRL_RESTORE_OFFSET	0x0018
-#define OMAP4430_CM_L3INSTR_L3_3_CLKCTRL_RESTORE	OMAP44XX_CM2_REGADDR(OMAP4430_CM2_RESTORE_INST, 0x0018)
-#define OMAP4_CM_L3INSTR_L3_INSTR_CLKCTRL_RESTORE_OFFSET	0x001c
-#define OMAP4430_CM_L3INSTR_L3_INSTR_CLKCTRL_RESTORE	OMAP44XX_CM2_REGADDR(OMAP4430_CM2_RESTORE_INST, 0x001c)
-#define OMAP4_CM_L3INSTR_OCP_WP1_CLKCTRL_RESTORE_OFFSET	0x0020
-#define OMAP4430_CM_L3INSTR_OCP_WP1_CLKCTRL_RESTORE	OMAP44XX_CM2_REGADDR(OMAP4430_CM2_RESTORE_INST, 0x0020)
-#define OMAP4_CM_CM2_PROFILING_CLKCTRL_RESTORE_OFFSET	0x0024
-#define OMAP4430_CM_CM2_PROFILING_CLKCTRL_RESTORE	OMAP44XX_CM2_REGADDR(OMAP4430_CM2_RESTORE_INST, 0x0024)
-#define OMAP4_CM_D2D_STATICDEP_RESTORE_OFFSET		0x0028
-#define OMAP4430_CM_D2D_STATICDEP_RESTORE		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_RESTORE_INST, 0x0028)
-#define OMAP4_CM_L3_1_DYNAMICDEP_RESTORE_OFFSET		0x002c
-#define OMAP4430_CM_L3_1_DYNAMICDEP_RESTORE		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_RESTORE_INST, 0x002c)
-#define OMAP4_CM_L3_2_DYNAMICDEP_RESTORE_OFFSET		0x0030
-#define OMAP4430_CM_L3_2_DYNAMICDEP_RESTORE		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_RESTORE_INST, 0x0030)
-#define OMAP4_CM_D2D_DYNAMICDEP_RESTORE_OFFSET		0x0034
-#define OMAP4430_CM_D2D_DYNAMICDEP_RESTORE		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_RESTORE_INST, 0x0034)
-#define OMAP4_CM_L4CFG_DYNAMICDEP_RESTORE_OFFSET	0x0038
-#define OMAP4430_CM_L4CFG_DYNAMICDEP_RESTORE		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_RESTORE_INST, 0x0038)
-#define OMAP4_CM_L4PER_DYNAMICDEP_RESTORE_OFFSET	0x003c
-#define OMAP4430_CM_L4PER_DYNAMICDEP_RESTORE		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_RESTORE_INST, 0x003c)
-#define OMAP4_CM_L4PER_GPIO2_CLKCTRL_RESTORE_OFFSET	0x0040
-#define OMAP4430_CM_L4PER_GPIO2_CLKCTRL_RESTORE		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_RESTORE_INST, 0x0040)
-#define OMAP4_CM_L4PER_GPIO3_CLKCTRL_RESTORE_OFFSET	0x0044
-#define OMAP4430_CM_L4PER_GPIO3_CLKCTRL_RESTORE		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_RESTORE_INST, 0x0044)
-#define OMAP4_CM_L4PER_GPIO4_CLKCTRL_RESTORE_OFFSET	0x0048
-#define OMAP4430_CM_L4PER_GPIO4_CLKCTRL_RESTORE		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_RESTORE_INST, 0x0048)
-#define OMAP4_CM_L4PER_GPIO5_CLKCTRL_RESTORE_OFFSET	0x004c
-#define OMAP4430_CM_L4PER_GPIO5_CLKCTRL_RESTORE		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_RESTORE_INST, 0x004c)
-#define OMAP4_CM_L4PER_GPIO6_CLKCTRL_RESTORE_OFFSET	0x0050
-#define OMAP4430_CM_L4PER_GPIO6_CLKCTRL_RESTORE		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_RESTORE_INST, 0x0050)
-#define OMAP4_CM_L3INIT_USB_HOST_CLKCTRL_RESTORE_OFFSET	0x0054
-#define OMAP4430_CM_L3INIT_USB_HOST_CLKCTRL_RESTORE	OMAP44XX_CM2_REGADDR(OMAP4430_CM2_RESTORE_INST, 0x0054)
-#define OMAP4_CM_L3INIT_USB_TLL_CLKCTRL_RESTORE_OFFSET	0x0058
-#define OMAP4430_CM_L3INIT_USB_TLL_CLKCTRL_RESTORE	OMAP44XX_CM2_REGADDR(OMAP4430_CM2_RESTORE_INST, 0x0058)
-#define OMAP4_CM_SDMA_STATICDEP_RESTORE_OFFSET		0x005c
-#define OMAP4430_CM_SDMA_STATICDEP_RESTORE		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_RESTORE_INST, 0x005c)
 /* Function prototypes */
 extern u32 omap4_cm2_read_inst_reg(s16 inst, u16 idx);
 extern void omap4_cm2_write_inst_reg(u32 val, s16 inst, u16 idx);

--- a/arch/arm/mach-omap2/cm44xx.h
+++ b/arch/arm/mach-omap2/cm44xx.h
 /*
 * OMAP4 Clock Management (CM) definitions
 *
- * Copyright (C) 2007-2009 Texas Instruments, Inc.
+ * Copyright (C) 2007-2011 Texas Instruments, Inc.
 * Copyright (C) 2007-2009 Nokia Corporation
 *
 * Written by Paul Walmsley
@@ -23,10 +23,4 @@
 #define OMAP4_CM_CLKSTCTRL				0x0000
 #define OMAP4_CM_STATICDEP				0x0004
-/* Function prototypes */
-# ifndef __ASSEMBLER__
-extern int omap4_cm_wait_module_ready(void __iomem *clkctrl_reg);
-# endif
 #endif
--- a/arch/arm/mach-omap2/cminst44xx.c
+++ b/arch/arm/mach-omap2/cminst44xx.c
--- a/arch/arm/mach-omap2/cminst44xx.h
+++ b/arch/arm/mach-omap2/cminst44xx.h
@@ -17,6 +17,14 @@ extern void omap4_cminst_clkdm_disable_hwsup(u8 part, s16 inst, u16 cdoffs);
 extern void omap4_cminst_clkdm_force_sleep(u8 part, s16 inst, u16 cdoffs);
 extern void omap4_cminst_clkdm_force_wakeup(u8 part, s16 inst, u16 cdoffs);
+extern int omap4_cminst_wait_module_ready(u8 part, u16 inst, s16 cdoffs, u16 clkctrl_offs);
+extern int omap4_cminst_wait_module_idle(u8 part, u16 inst, s16 cdoffs, u16 clkctrl_offs);
+extern void omap4_cminst_module_enable(u8 mode, u8 part, u16 inst, s16 cdoffs,
+				       u16 clkctrl_offs);
+extern void omap4_cminst_module_disable(u8 part, u16 inst, s16 cdoffs,
+					u16 clkctrl_offs);
 /*
 * In an ideal world, we would not export these low-level functions,
 * but this will probably take some time to fix properly
@@ -32,6 +40,4 @@ extern u32 omap4_cminst_clear_inst_reg_bits(u32 bits, u8 part, s16 inst,
 extern u32 omap4_cminst_read_inst_reg_bits(u8 part, u16 inst, s16 idx,
 					   u32 mask);
-extern int omap4_cm_wait_module_ready(void __iomem *clkctrl_reg);
 #endif
--- a/arch/arm/mach-omap2/common-board-devices.c
+++ b/arch/arm/mach-omap2/common-board-devices.c
--- a/arch/arm/mach-omap2/common-board-devices.h
+++ b/arch/arm/mach-omap2/common-board-devices.h
--- a/arch/arm/mach-omap2/gpmc-nand.c
+++ b/arch/arm/mach-omap2/gpmc-nand.c
--- a/arch/arm/mach-omap2/i2c.c
+++ b/arch/arm/mach-omap2/i2c.c
--- a/arch/arm/mach-omap2/io.c
+++ b/arch/arm/mach-omap2/io.c
--- a/arch/arm/mach-omap2/irq.c
+++ b/arch/arm/mach-omap2/irq.c
--- a/arch/arm/mach-omap2/omap4-common.c
+++ b/arch/arm/mach-omap2/omap4-common.c
--- a/arch/arm/mach-omap2/omap_hwmod.c
+++ b/arch/arm/mach-omap2/omap_hwmod.c
--- a/arch/arm/mach-omap2/omap_hwmod_2420_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_2420_data.c
--- a/arch/arm/mach-omap2/omap_hwmod_2430_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_2430_data.c
--- a/arch/arm/mach-omap2/omap_hwmod_2xxx_3xxx_interconnect_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_2xxx_3xxx_interconnect_data.c
--- a/arch/arm/mach-omap2/omap_hwmod_2xxx_3xxx_ipblock_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_2xxx_3xxx_ipblock_data.c
--- a/arch/arm/mach-omap2/omap_hwmod_2xxx_interconnect_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_2xxx_interconnect_data.c
--- a/arch/arm/mach-omap2/omap_hwmod_2xxx_ipblock_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_2xxx_ipblock_data.c
--- a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c
--- a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
--- a/arch/arm/mach-omap2/omap_hwmod_common_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_common_data.c
--- a/arch/arm/mach-omap2/omap_hwmod_common_data.h
+++ b/arch/arm/mach-omap2/omap_hwmod_common_data.h
--- a/arch/arm/mach-omap2/pm-debug.c
+++ b/arch/arm/mach-omap2/pm-debug.c
--- a/arch/arm/mach-omap2/pm.c
+++ b/arch/arm/mach-omap2/pm.c
--- a/arch/arm/mach-omap2/pm.h
+++ b/arch/arm/mach-omap2/pm.h
--- a/arch/arm/mach-omap2/pm24xx.c
+++ b/arch/arm/mach-omap2/pm24xx.c
--- a/arch/arm/mach-omap2/pm34xx.c
+++ b/arch/arm/mach-omap2/pm34xx.c
--- a/arch/arm/mach-omap2/powerdomains44xx_data.c
+++ b/arch/arm/mach-omap2/powerdomains44xx_data.c
--- a/arch/arm/mach-omap2/prcm.c
+++ b/arch/arm/mach-omap2/prcm.c
@@ -70,7 +70,7 @@ static void omap_prcm_arch_reset(char mode, const char *cmd)
 		prcm_offs = OMAP3430_GR_MOD;
 		omap3_ctrl_write_boot_mode((cmd ? (u8)*cmd : 0));
 	} else if (cpu_is_omap44xx()) {
-		omap4_prm_global_warm_sw_reset(); /* never returns */
+		omap4_prminst_global_warm_sw_reset(); /* never returns */
 	} else {
 		WARN_ON(1);
 	}

--- a/arch/arm/mach-omap2/prcm_mpu44xx.h
+++ b/arch/arm/mach-omap2/prcm_mpu44xx.h
--- a/arch/arm/mach-omap2/prm44xx.c
+++ b/arch/arm/mach-omap2/prm44xx.c
--- a/arch/arm/mach-omap2/prm44xx.h
+++ b/arch/arm/mach-omap2/prm44xx.h
--- a/arch/arm/mach-omap2/prminst44xx.c
+++ b/arch/arm/mach-omap2/prminst44xx.c
--- a/arch/arm/mach-omap2/prminst44xx.h
+++ b/arch/arm/mach-omap2/prminst44xx.h
--- a/arch/arm/mach-omap2/smartreflex.c
+++ b/arch/arm/mach-omap2/smartreflex.c
--- a/arch/arm/mach-omap2/timer-gp.h
+++ b/arch/arm/mach-omap2/timer-gp.h
--- a/arch/arm/mach-omap2/timer-gp.c
+++ b/arch/arm/mach-omap2/timer-gp.c
--- a/arch/arm/mach-omap2/twl-common.c
+++ b/arch/arm/mach-omap2/twl-common.c
--- a/arch/arm/mach-omap2/twl-common.h
+++ b/arch/arm/mach-omap2/twl-common.h
--- a/arch/arm/plat-omap/Kconfig
+++ b/arch/arm/plat-omap/Kconfig
--- a/arch/arm/plat-omap/clock.c
+++ b/arch/arm/plat-omap/clock.c
--- a/arch/arm/plat-omap/counter_32k.c
+++ b/arch/arm/plat-omap/counter_32k.c
--- a/arch/arm/plat-omap/dmtimer.c
+++ b/arch/arm/plat-omap/dmtimer.c
--- a/arch/arm/plat-omap/include/plat/clock.h
+++ b/arch/arm/plat-omap/include/plat/clock.h
--- a/arch/arm/plat-omap/include/plat/common.h
+++ b/arch/arm/plat-omap/include/plat/common.h
--- a/arch/arm/plat-omap/include/plat/dmtimer.h
+++ b/arch/arm/plat-omap/include/plat/dmtimer.h
--- a/arch/arm/plat-omap/include/plat/i2c.h
+++ b/arch/arm/plat-omap/include/plat/i2c.h
--- a/arch/arm/plat-omap/include/plat/irqs.h
+++ b/arch/arm/plat-omap/include/plat/irqs.h
--- a/arch/arm/plat-omap/include/plat/mcbsp.h
+++ b/arch/arm/plat-omap/include/plat/mcbsp.h
--- a/arch/arm/plat-omap/include/plat/nand.h
+++ b/arch/arm/plat-omap/include/plat/nand.h
--- a/arch/arm/plat-omap/include/plat/omap-pm.h
+++ b/arch/arm/plat-omap/include/plat/omap-pm.h
--- a/arch/arm/plat-omap/include/plat/omap_hwmod.h
+++ b/arch/arm/plat-omap/include/plat/omap_hwmod.h
--- a/arch/arm/plat-omap/mcbsp.c
+++ b/arch/arm/plat-omap/mcbsp.c
--- a/arch/arm/plat-omap/omap_device.c
+++ b/arch/arm/plat-omap/omap_device.c
--- a/drivers/input/misc/Kconfig
+++ b/drivers/input/misc/Kconfig
--- a/drivers/input/misc/Makefile
+++ b/drivers/input/misc/Makefile
--- a/drivers/input/misc/twl4030-vibra.c
+++ b/drivers/input/misc/twl4030-vibra.c
--- a/drivers/input/misc/twl6040-vibra.c
+++ b/drivers/input/misc/twl6040-vibra.c
--- a/drivers/mfd/Kconfig
+++ b/drivers/mfd/Kconfig
--- a/drivers/mfd/Makefile
+++ b/drivers/mfd/Makefile
--- a/drivers/mfd/twl-core.c
+++ b/drivers/mfd/twl-core.c
--- a/drivers/mfd/twl4030-codec.c
+++ b/drivers/mfd/twl4030-codec.c
--- a/drivers/mfd/twl6040-core.c
+++ b/drivers/mfd/twl6040-core.c
--- a/drivers/mfd/twl6040-irq.c
+++ b/drivers/mfd/twl6040-irq.c
--- a/include/linux/i2c-omap.h
+++ b/include/linux/i2c-omap.h
--- a/include/linux/i2c/twl.h
+++ b/include/linux/i2c/twl.h
--- a/include/linux/mfd/twl4030-codec.h
+++ b/include/linux/mfd/twl4030-codec.h
--- a/include/linux/mfd/twl6040.h
+++ b/include/linux/mfd/twl6040.h
--- a/sound/soc/codecs/Kconfig
+++ b/sound/soc/codecs/Kconfig
--- a/sound/soc/codecs/twl4030.c
+++ b/sound/soc/codecs/twl4030.c
--- a/sound/soc/codecs/twl6040.c
+++ b/sound/soc/codecs/twl6040.c
--- a/sound/soc/codecs/twl6040.h
+++ b/sound/soc/codecs/twl6040.h
--- a/sound/soc/omap/sdp3430.c
+++ b/sound/soc/omap/sdp3430.c
--- a/sound/soc/omap/sdp4430.c
+++ b/sound/soc/omap/sdp4430.c
--- a/sound/soc/omap/zoom2.c
+++ b/sound/soc/omap/zoom2.c