提交 bc21fa57 编写于 作者: B Borislav Petkov

amd64_edac: Cleanup DHAR handling

Adjust to F15h, simplify code, fixup macros.
Signed-off-by: NBorislav Petkov <borislav.petkov@amd.com>
上级 7f19bf75
......@@ -487,9 +487,9 @@ int amd64_get_dram_hole_info(struct mem_ctl_info *mci, u64 *hole_base,
return 1;
}
/* only valid for Fam10h */
if (boot_cpu_data.x86 == 0x10 &&
(pvt->dhar & F10_DRAM_MEM_HOIST_VALID) == 0) {
/* valid for Fam10h and above */
if (boot_cpu_data.x86 >= 0x10 &&
(pvt->dhar & DRAM_MEM_HOIST_VALID) == 0) {
debugf1(" Dram Memory Hoisting is DISABLED on this system\n");
return 1;
}
......@@ -518,15 +518,15 @@ int amd64_get_dram_hole_info(struct mem_ctl_info *mci, u64 *hole_base,
* addresses in the hole so that they start at 0x100000000.
*/
base = dhar_base(pvt->dhar);
base = dhar_base(pvt);
*hole_base = base;
*hole_size = (0x1ull << 32) - base;
if (boot_cpu_data.x86 > 0xf)
*hole_offset = f10_dhar_offset(pvt->dhar);
*hole_offset = f10_dhar_offset(pvt);
else
*hole_offset = k8_dhar_offset(pvt->dhar);
*hole_offset = k8_dhar_offset(pvt);
debugf1(" DHAR info for node %d base 0x%lx offset 0x%lx size 0x%lx\n",
pvt->mc_node_id, (unsigned long)*hole_base,
......@@ -884,10 +884,9 @@ static void dump_misc_regs(struct amd64_pvt *pvt)
debugf1("F1xF0 (DRAM Hole Address): 0x%08x, base: 0x%08x, "
"offset: 0x%08x\n",
pvt->dhar,
dhar_base(pvt->dhar),
(boot_cpu_data.x86 == 0xf) ? k8_dhar_offset(pvt->dhar)
: f10_dhar_offset(pvt->dhar));
pvt->dhar, dhar_base(pvt),
(boot_cpu_data.x86 == 0xf) ? k8_dhar_offset(pvt)
: f10_dhar_offset(pvt));
debugf1(" DramHoleValid: %s\n",
(pvt->dhar & DHAR_VALID) ? "yes" : "no");
......@@ -1316,7 +1315,7 @@ static inline u32 f10_map_intlv_en_to_shift(u32 intlv_en)
static inline u64 f10_get_base_addr_offset(u64 sys_addr, int hi_range_sel,
u32 dct_sel_base_addr,
u64 dct_sel_base_off,
u32 hole_valid, u32 hole_off,
u32 hole_valid, u64 hole_off,
u64 dram_base)
{
u64 chan_off;
......@@ -1324,12 +1323,12 @@ static inline u64 f10_get_base_addr_offset(u64 sys_addr, int hi_range_sel,
if (hi_range_sel) {
if (!(dct_sel_base_addr & 0xFFFF0000) &&
hole_valid && (sys_addr >= 0x100000000ULL))
chan_off = hole_off << 16;
chan_off = hole_off;
else
chan_off = dct_sel_base_off;
} else {
if (hole_valid && (sys_addr >= 0x100000000ULL))
chan_off = hole_off << 16;
chan_off = hole_off;
else
chan_off = dram_base & 0xFFFFF8000000ULL;
}
......@@ -1435,7 +1434,8 @@ static int f10_match_to_this_node(struct amd64_pvt *pvt, int range,
u64 sys_addr, int *nid, int *chan_sel)
{
int cs_found = -EINVAL, high_range = 0;
u32 intlv_shift, hole_off;
u32 intlv_shift;
u64 hole_off;
u32 hole_valid, tmp, dct_sel_base, channel;
u64 chan_addr, dct_sel_base_off;
......@@ -1451,11 +1451,11 @@ static int f10_match_to_this_node(struct amd64_pvt *pvt, int range,
* This assumes that one node's DHAR is the same as all the other
* nodes' DHAR.
*/
hole_off = (pvt->dhar & 0x0000FF80);
hole_valid = (pvt->dhar & 0x1);
hole_off = f10_dhar_offset(pvt);
hole_valid = (pvt->dhar & DHAR_VALID);
dct_sel_base_off = (pvt->dct_sel_hi & 0xFFFFFC00) << 16;
debugf1(" HoleOffset=0x%x HoleValid=0x%x IntlvSel=0x%x\n",
debugf1(" HoleOffset=0x%016llx HoleValid=%d IntlvSel=0x%x\n",
hole_off, hole_valid, intlv_sel);
if (intlv_en &&
......@@ -2051,7 +2051,7 @@ static void read_mc_regs(struct amd64_pvt *pvt)
read_dct_base_mask(pvt);
amd64_read_pci_cfg(pvt->F1, K8_DHAR, &pvt->dhar);
amd64_read_pci_cfg(pvt->F1, DHAR, &pvt->dhar);
amd64_read_dbam_reg(pvt);
amd64_read_pci_cfg(pvt->F3, F10_ONLINE_SPARE, &pvt->online_spare);
......
......@@ -175,20 +175,19 @@
#define dram_intlv_sel(pvt, i) ((pvt->ranges[i].lim.lo >> 8) & 0x7)
#define dram_dst_node(pvt, i) (pvt->ranges[i].lim.lo & 0x7)
#define K8_DHAR 0xf0
#define DHAR 0xf0
#define DHAR_VALID BIT(0)
#define F10_DRAM_MEM_HOIST_VALID BIT(1)
#define DRAM_MEM_HOIST_VALID BIT(1)
#define DHAR_BASE_MASK 0xff000000
#define dhar_base(dhar) (dhar & DHAR_BASE_MASK)
#define dhar_base(pvt) ((pvt)->dhar & DHAR_BASE_MASK)
#define K8_DHAR_OFFSET_MASK 0x0000ff00
#define k8_dhar_offset(dhar) ((dhar & K8_DHAR_OFFSET_MASK) << 16)
#define k8_dhar_offset(pvt) (((pvt)->dhar & K8_DHAR_OFFSET_MASK) << 16)
#define F10_DHAR_OFFSET_MASK 0x0000ff80
/* NOTE: Extra mask bit vs K8 */
#define f10_dhar_offset(dhar) ((dhar & F10_DHAR_OFFSET_MASK) << 16)
#define f10_dhar_offset(pvt) (((pvt)->dhar & F10_DHAR_OFFSET_MASK) << 16)
#define DCT_CFG_SEL 0x10C
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册