提交 bbdc070a 编写于 作者: D Dave Gordon 提交者: Chris Wilson

drm/i915: rename macro parameter(ring) to (engine)

'ring' is an old deprecated term for a GPU engine. Here we make the
terminology more consistent by renaming the 'ring' parameter of lots of
macros that calculate addresses within the MMIO space of an engine.
Signed-off-by: NDave Gordon <david.s.gordon@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1469034967-15840-2-git-send-email-david.s.gordon@intel.comReviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
上级 873e8171
......@@ -186,13 +186,13 @@ static inline bool i915_mmio_reg_valid(i915_reg_t reg)
#define GEN9_GRDOM_GUC (1 << 5)
#define GEN8_GRDOM_MEDIA2 (1 << 7)
#define RING_PP_DIR_BASE(ring) _MMIO((ring)->mmio_base+0x228)
#define RING_PP_DIR_BASE_READ(ring) _MMIO((ring)->mmio_base+0x518)
#define RING_PP_DIR_DCLV(ring) _MMIO((ring)->mmio_base+0x220)
#define RING_PP_DIR_BASE(engine) _MMIO((engine)->mmio_base+0x228)
#define RING_PP_DIR_BASE_READ(engine) _MMIO((engine)->mmio_base+0x518)
#define RING_PP_DIR_DCLV(engine) _MMIO((engine)->mmio_base+0x220)
#define PP_DIR_DCLV_2G 0xffffffff
#define GEN8_RING_PDP_UDW(ring, n) _MMIO((ring)->mmio_base+0x270 + (n) * 8 + 4)
#define GEN8_RING_PDP_LDW(ring, n) _MMIO((ring)->mmio_base+0x270 + (n) * 8)
#define GEN8_RING_PDP_UDW(engine, n) _MMIO((engine)->mmio_base+0x270 + (n) * 8 + 4)
#define GEN8_RING_PDP_LDW(engine, n) _MMIO((engine)->mmio_base+0x270 + (n) * 8)
#define GEN8_R_PWR_CLK_STATE _MMIO(0x20C8)
#define GEN8_RPCS_ENABLE (1 << 31)
......@@ -1647,7 +1647,7 @@ enum skl_disp_power_wells {
#define ARB_MODE_BWGTLB_DISABLE (1<<9)
#define ARB_MODE_SWIZZLE_BDW (1<<1)
#define RENDER_HWS_PGA_GEN7 _MMIO(0x04080)
#define RING_FAULT_REG(ring) _MMIO(0x4094 + 0x100*(ring)->id)
#define RING_FAULT_REG(engine) _MMIO(0x4094 + 0x100*(engine)->id)
#define RING_FAULT_GTTSEL_MASK (1<<11)
#define RING_FAULT_SRCID(x) (((x) >> 3) & 0xff)
#define RING_FAULT_FAULT_TYPE(x) (((x) >> 1) & 0x3)
......@@ -1845,7 +1845,7 @@ enum skl_disp_power_wells {
#define GFX_MODE _MMIO(0x2520)
#define GFX_MODE_GEN7 _MMIO(0x229c)
#define RING_MODE_GEN7(ring) _MMIO((ring)->mmio_base+0x29c)
#define RING_MODE_GEN7(engine) _MMIO((engine)->mmio_base+0x29c)
#define GFX_RUN_LIST_ENABLE (1<<15)
#define GFX_INTERRUPT_STEERING (1<<14)
#define GFX_TLB_INVALIDATE_EXPLICIT (1<<13)
......
......@@ -29,17 +29,17 @@
#define GEN8_LR_CONTEXT_ALIGN 4096
/* Execlists regs */
#define RING_ELSP(ring) _MMIO((ring)->mmio_base + 0x230)
#define RING_EXECLIST_STATUS_LO(ring) _MMIO((ring)->mmio_base + 0x234)
#define RING_EXECLIST_STATUS_HI(ring) _MMIO((ring)->mmio_base + 0x234 + 4)
#define RING_CONTEXT_CONTROL(ring) _MMIO((ring)->mmio_base + 0x244)
#define RING_ELSP(engine) _MMIO((engine)->mmio_base + 0x230)
#define RING_EXECLIST_STATUS_LO(engine) _MMIO((engine)->mmio_base + 0x234)
#define RING_EXECLIST_STATUS_HI(engine) _MMIO((engine)->mmio_base + 0x234 + 4)
#define RING_CONTEXT_CONTROL(engine) _MMIO((engine)->mmio_base + 0x244)
#define CTX_CTRL_INHIBIT_SYN_CTX_SWITCH (1 << 3)
#define CTX_CTRL_ENGINE_CTX_RESTORE_INHIBIT (1 << 0)
#define CTX_CTRL_RS_CTX_ENABLE (1 << 1)
#define RING_CONTEXT_STATUS_BUF_BASE(ring) _MMIO((ring)->mmio_base + 0x370)
#define RING_CONTEXT_STATUS_BUF_LO(ring, i) _MMIO((ring)->mmio_base + 0x370 + (i) * 8)
#define RING_CONTEXT_STATUS_BUF_HI(ring, i) _MMIO((ring)->mmio_base + 0x370 + (i) * 8 + 4)
#define RING_CONTEXT_STATUS_PTR(ring) _MMIO((ring)->mmio_base + 0x3a0)
#define RING_CONTEXT_STATUS_BUF_BASE(engine) _MMIO((engine)->mmio_base + 0x370)
#define RING_CONTEXT_STATUS_BUF_LO(engine, i) _MMIO((engine)->mmio_base + 0x370 + (i) * 8)
#define RING_CONTEXT_STATUS_BUF_HI(engine, i) _MMIO((engine)->mmio_base + 0x370 + (i) * 8 + 4)
#define RING_CONTEXT_STATUS_PTR(engine) _MMIO((engine)->mmio_base + 0x3a0)
/* The docs specify that the write pointer wraps around after 5h, "After status
* is written out to the last available status QW at offset 5h, this pointer
......
......@@ -31,23 +31,23 @@ struct intel_hw_status_page {
struct drm_i915_gem_object *obj;
};
#define I915_READ_TAIL(ring) I915_READ(RING_TAIL((ring)->mmio_base))
#define I915_WRITE_TAIL(ring, val) I915_WRITE(RING_TAIL((ring)->mmio_base), val)
#define I915_READ_TAIL(engine) I915_READ(RING_TAIL((engine)->mmio_base))
#define I915_WRITE_TAIL(engine, val) I915_WRITE(RING_TAIL((engine)->mmio_base), val)
#define I915_READ_START(ring) I915_READ(RING_START((ring)->mmio_base))
#define I915_WRITE_START(ring, val) I915_WRITE(RING_START((ring)->mmio_base), val)
#define I915_READ_START(engine) I915_READ(RING_START((engine)->mmio_base))
#define I915_WRITE_START(engine, val) I915_WRITE(RING_START((engine)->mmio_base), val)
#define I915_READ_HEAD(ring) I915_READ(RING_HEAD((ring)->mmio_base))
#define I915_WRITE_HEAD(ring, val) I915_WRITE(RING_HEAD((ring)->mmio_base), val)
#define I915_READ_HEAD(engine) I915_READ(RING_HEAD((engine)->mmio_base))
#define I915_WRITE_HEAD(engine, val) I915_WRITE(RING_HEAD((engine)->mmio_base), val)
#define I915_READ_CTL(ring) I915_READ(RING_CTL((ring)->mmio_base))
#define I915_WRITE_CTL(ring, val) I915_WRITE(RING_CTL((ring)->mmio_base), val)
#define I915_READ_CTL(engine) I915_READ(RING_CTL((engine)->mmio_base))
#define I915_WRITE_CTL(engine, val) I915_WRITE(RING_CTL((engine)->mmio_base), val)
#define I915_READ_IMR(ring) I915_READ(RING_IMR((ring)->mmio_base))
#define I915_WRITE_IMR(ring, val) I915_WRITE(RING_IMR((ring)->mmio_base), val)
#define I915_READ_IMR(engine) I915_READ(RING_IMR((engine)->mmio_base))
#define I915_WRITE_IMR(engine, val) I915_WRITE(RING_IMR((engine)->mmio_base), val)
#define I915_READ_MODE(ring) I915_READ(RING_MI_MODE((ring)->mmio_base))
#define I915_WRITE_MODE(ring, val) I915_WRITE(RING_MI_MODE((ring)->mmio_base), val)
#define I915_READ_MODE(engine) I915_READ(RING_MI_MODE((engine)->mmio_base))
#define I915_WRITE_MODE(engine, val) I915_WRITE(RING_MI_MODE((engine)->mmio_base), val)
/* seqno size is actually only a uint32, but since we plan to use MI_FLUSH_DW to
* do the writes, and that must have qw aligned offsets, simply pretend it's 8b.
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册