wl1271: Add TSF handling

Add functionality to pass the current TSF (mac time) to the mac80211. This is
needed for ad-hoc merging.
Signed-off-by: NJuuso Oikarinen <juuso.oikarinen@nokia.com>
Reviewed-by: NLuciano Coelho <luciano.coelho@nokia.com>
Signed-off-by: NLuciano Coelho <luciano.coelho@nokia.com>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

drivers/net/wireless/wl12xx/wl1271_acx.c

@@ -1266,3 +1266,29 @@ int wl1271_acx_rssi_snr_avg_weights(struct wl1271 *wl)
 	kfree(acx);
 	return ret;
 }
+
+int wl1271_acx_tsf_info(struct wl1271 *wl, u64 *mactime)
+{
+	struct wl1271_acx_fw_tsf_information *tsf_info;
+	int ret;
+
+	tsf_info = kzalloc(sizeof(*tsf_info), GFP_KERNEL);
+	if (!tsf_info) {
+		ret = -ENOMEM;
+		goto out;
+	}
+
+	ret = wl1271_cmd_interrogate(wl, ACX_TSF_INFO,
+				     tsf_info, sizeof(*tsf_info));
+	if (ret < 0) {
+		wl1271_warning("acx tsf info interrogate failed");
+		goto out;
+	}
+
+	*mactime = le32_to_cpu(tsf_info->current_tsf_low) |
+		((u64) le32_to_cpu(tsf_info->current_tsf_high) << 32);
+
+out:
+	kfree(tsf_info);
+	return ret;
+}

drivers/net/wireless/wl12xx/wl1271_acx.h

@@ -993,6 +993,17 @@ struct wl1271_acx_rssi_snr_avg_weights {
 	u8 snr_data;
 };
 
+struct wl1271_acx_fw_tsf_information {
+	struct acx_header header;
+
+	__le32 current_tsf_high;
+	__le32 current_tsf_low;
+	__le32 last_bttt_high;
+	__le32 last_tbtt_low;
+	u8 last_dtim_count;
+	u8 padding[3];
+} __attribute__ ((packed));
+
 enum {
 	ACX_WAKE_UP_CONDITIONS      = 0x0002,
 	ACX_MEM_CFG                 = 0x0003,
@@ -1114,5 +1125,6 @@ int wl1271_acx_keep_alive_config(struct wl1271 *wl, u8 index, u8 tpl_valid);
 int wl1271_acx_rssi_snr_trigger(struct wl1271 *wl, bool enable,
 				s16 thold, u8 hyst);
 int wl1271_acx_rssi_snr_avg_weights(struct wl1271 *wl);
+int wl1271_acx_tsf_info(struct wl1271 *wl, u64 *mactime);
 
 #endif /* __WL1271_ACX_H__ */

drivers/net/wireless/wl12xx/wl1271_main.c

@@ -1966,6 +1966,32 @@ static int wl1271_op_conf_tx(struct ieee80211_hw *hw, u16 queue,
 	return ret;
 }
 
+static u64 wl1271_op_get_tsf(struct ieee80211_hw *hw)
+{
+
+	struct wl1271 *wl = hw->priv;
+	u64 mactime = ULLONG_MAX;
+	int ret;
+
+	wl1271_debug(DEBUG_MAC80211, "mac80211 get tsf");
+
+	mutex_lock(&wl->mutex);
+
+	ret = wl1271_ps_elp_wakeup(wl, false);
+	if (ret < 0)
+		goto out;
+
+	ret = wl1271_acx_tsf_info(wl, &mactime);
+	if (ret < 0)
+		goto out_sleep;
+
+out_sleep:
+	wl1271_ps_elp_sleep(wl);
+
+out:
+	mutex_unlock(&wl->mutex);
+	return mactime;
+}
 
 /* can't be const, mac80211 writes to this */
 static struct ieee80211_rate wl1271_rates[] = {
@@ -2195,6 +2221,7 @@ static const struct ieee80211_ops wl1271_ops = {
 	.bss_info_changed = wl1271_op_bss_info_changed,
 	.set_rts_threshold = wl1271_op_set_rts_threshold,
 	.conf_tx = wl1271_op_conf_tx,
+	.get_tsf = wl1271_op_get_tsf,
 	CFG80211_TESTMODE_CMD(wl1271_tm_cmd)
 };
 

drivers/net/wireless/wl12xx/wl1271_rx.c

@@ -53,12 +53,6 @@ static void wl1271_rx_status(struct wl1271 *wl,
 	status->band = wl->band;
 	status->rate_idx = wl1271_rate_to_idx(wl, desc->rate);
 
-	/*
-	 * FIXME: Add mactime handling.  For IBSS (ad-hoc) we need to get the
-	 * timestamp from the beacon (acx_tsf_info).  In BSS mode (infra) we
-	 * only need the mactime for monitor mode.  For now the mactime is
-	 * not valid, so RX_FLAG_TSFT should not be set
-	 */
 	status->signal = desc->rssi;
 
 	status->freq = ieee80211_channel_to_frequency(desc->channel);