Skip to content

cloud-kernel
cloud-kernel

openanolis / cloud-kernel
大约 1 年 前同步成功

通知 156
Star 36
Fork 7
cloud-kernel
cloud-kernel

体验新版 GitCode，发现更多精彩内容 >>

提交 bb9b813b 编写于 作者: R Ralf Baechle
浏览文件
操作

[MIPS] Sibyte: Fix ZBbus profiler 

 o Fix build error.
 o Handle error returns.
 o Deal with signals received while sleeping.
 o Don't allow to be selected when we're not building the directory with
   the driver anyway.
 o Coding style cleanups.
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
上级 ca6f5494
隐藏空白更改
内联 并排
Showing with 283 addition and 218 deletion
arch/mips/sibyte/Kconfig
浏览文件 @ bb9b813b
...@@ -8,12 +8,14 @@ config SIBYTE_SB1250 ...@@ -8,12 +8,14 @@ config SIBYTE_SB1250
config SIBYTE_BCM1120 config SIBYTE_BCM1120
bool bool
select SIBYTE_BCM112X select SIBYTE_BCM112X
select SIBYTE_HAS_ZBUS_PROFILING
select SIBYTE_SB1xxx_SOC select SIBYTE_SB1xxx_SOC
config SIBYTE_BCM1125 config SIBYTE_BCM1125
bool bool
select HW_HAS_PCI select HW_HAS_PCI
select SIBYTE_BCM112X select SIBYTE_BCM112X
select SIBYTE_HAS_ZBUS_PROFILING
select SIBYTE_SB1xxx_SOC select SIBYTE_SB1xxx_SOC
config SIBYTE_BCM1125H config SIBYTE_BCM1125H
...@@ -21,11 +23,13 @@ config SIBYTE_BCM1125H ...@@ -21,11 +23,13 @@ config SIBYTE_BCM1125H
select HW_HAS_PCI select HW_HAS_PCI
select SIBYTE_BCM112X select SIBYTE_BCM112X
select SIBYTE_ENABLE_LDT_IF_PCI select SIBYTE_ENABLE_LDT_IF_PCI
select SIBYTE_HAS_ZBUS_PROFILING
select SIBYTE_SB1xxx_SOC select SIBYTE_SB1xxx_SOC
config SIBYTE_BCM112X config SIBYTE_BCM112X
bool bool
select SIBYTE_SB1xxx_SOC select SIBYTE_SB1xxx_SOC
select SIBYTE_HAS_ZBUS_PROFILING
config SIBYTE_BCM1x80 config SIBYTE_BCM1x80
bool bool
...@@ -37,6 +41,7 @@ config SIBYTE_BCM1x55 ...@@ -37,6 +41,7 @@ config SIBYTE_BCM1x55
bool bool
select HW_HAS_PCI select HW_HAS_PCI
select SIBYTE_SB1xxx_SOC select SIBYTE_SB1xxx_SOC
select SIBYTE_HAS_ZBUS_PROFILING
select SYS_SUPPORTS_SMP select SYS_SUPPORTS_SMP
config SIBYTE_SB1xxx_SOC config SIBYTE_SB1xxx_SOC
...@@ -164,5 +169,8 @@ config SIBYTE_SB1250_PROF ...@@ -164,5 +169,8 @@ config SIBYTE_SB1250_PROF
depends on SIBYTE_SB1xxx_SOC depends on SIBYTE_SB1xxx_SOC
config SIBYTE_TBPROF config SIBYTE_TBPROF
bool "Support for ZBbus profiling" tristate "Support for ZBbus profiling"
depends on SIBYTE_SB1xxx_SOC depends on SIBYTE_HAS_ZBUS_PROFILING
config SIBYTE_HAS_ZBUS_PROFILING
bool
arch/mips/sibyte/sb1250/bcm1250_tbprof.c
浏览文件 @ bb9b813b
/* /*
* Copyright (C) 2001, 2002, 2003 Broadcom Corporation
*
* This program is free software; you can redistribute it and/or * This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License * modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version 2 * as published by the Free Software Foundation; either version 2
...@@ -14,10 +12,16 @@ ...@@ -14,10 +12,16 @@
* You should have received a copy of the GNU General Public License * You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software * along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
*
* Copyright (C) 2001, 2002, 2003 Broadcom Corporation
* Copyright (C) 2007 Ralf Baechle <ralf@linux-mips.org>
* Copyright (C) 2007 MIPS Technologies, Inc.
* written by Ralf Baechle <ralf@linux-mips.org>
*/ */
#define SBPROF_TB_DEBUG 0 #undef DEBUG
#include <linux/device.h>
#include <linux/module.h> #include <linux/module.h>
#include <linux/kernel.h> #include <linux/kernel.h>
#include <linux/types.h> #include <linux/types.h>
...@@ -27,24 +31,98 @@ ...@@ -27,24 +31,98 @@
#include <linux/vmalloc.h> #include <linux/vmalloc.h>
#include <linux/fs.h> #include <linux/fs.h>
#include <linux/errno.h> #include <linux/errno.h>
#include <linux/reboot.h> #include <linux/types.h>
#include <linux/smp_lock.h>
#include <linux/wait.h> #include <linux/wait.h>
#include <asm/uaccess.h>
#include <asm/io.h> #include <asm/io.h>
#include <asm/sibyte/sb1250.h> #include <asm/sibyte/sb1250.h>
#include <asm/sibyte/sb1250_regs.h> #include <asm/sibyte/sb1250_regs.h>
#include <asm/sibyte/sb1250_scd.h> #include <asm/sibyte/sb1250_scd.h>
#include <asm/sibyte/sb1250_int.h> #include <asm/sibyte/sb1250_int.h>
#include <asm/sibyte/trace_prof.h> #include <asm/system.h>
#include <asm/uaccess.h>
#define DEVNAME "bcm1250_tbprof" #define SBPROF_TB_MAJOR 240
typedef u64 tb_sample_t[6*256];
enum open_status {
SB_CLOSED,
SB_OPENING,
SB_OPEN
};
struct sbprof_tb {
wait_queue_head_t tb_sync;
wait_queue_head_t tb_read;
struct mutex lock;
enum open_status open;
tb_sample_t *sbprof_tbbuf;
int next_tb_sample;
volatile int tb_enable;
volatile int tb_armed;
};
static struct sbprof_tb sbp; static struct sbprof_tb sbp;
#define MAX_SAMPLE_BYTES (24*1024*1024)
#define MAX_TBSAMPLE_BYTES (12*1024*1024)
#define MAX_SAMPLES (MAX_SAMPLE_BYTES/sizeof(u_int32_t))
#define TB_SAMPLE_SIZE (sizeof(tb_sample_t))
#define MAX_TB_SAMPLES (MAX_TBSAMPLE_BYTES/TB_SAMPLE_SIZE)
/* ioctls */
#define SBPROF_ZBSTART _IOW('s', 0, int)
#define SBPROF_ZBSTOP _IOW('s', 1, int)
#define SBPROF_ZBWAITFULL _IOW('s', 2, int)
/*
* Routines for using 40-bit SCD cycle counter
*
* Client responsible for either handling interrupts or making sure
* the cycles counter never saturates, e.g., by doing
* zclk_timer_init(0) at least every 2^40 - 1 ZCLKs.
*/
/*
* Configures SCD counter 0 to count ZCLKs starting from val;
* Configures SCD counters1,2,3 to count nothing.
* Must not be called while gathering ZBbus profiles.
*/
#define zclk_timer_init(val) \
__asm__ __volatile__ (".set push;" \
".set mips64;" \
"la $8, 0xb00204c0;" /* SCD perf_cnt_cfg */ \
"sd %0, 0x10($8);" /* write val to counter0 */ \
"sd %1, 0($8);" /* config counter0 for zclks*/ \
".set pop" \
: /* no outputs */ \
/* enable, counter0 */ \
: /* inputs */ "r"(val), "r" ((1ULL << 33) | 1ULL) \
: /* modifies */ "$8" )
/* Reads SCD counter 0 and puts result in value
unsigned long long val; */
#define zclk_get(val) \
__asm__ __volatile__ (".set push;" \
".set mips64;" \
"la $8, 0xb00204c0;" /* SCD perf_cnt_cfg */ \
"ld %0, 0x10($8);" /* write val to counter0 */ \
".set pop" \
: /* outputs */ "=r"(val) \
: /* inputs */ \
: /* modifies */ "$8" )
#define DEVNAME "bcm1250_tbprof"
#define TB_FULL (sbp.next_tb_sample == MAX_TB_SAMPLES) #define TB_FULL (sbp.next_tb_sample == MAX_TB_SAMPLES)
/************************************************************************ /*
* Support for ZBbus sampling using the trace buffer * Support for ZBbus sampling using the trace buffer
* *
* We use the SCD performance counter interrupt, caused by a Zclk counter * We use the SCD performance counter interrupt, caused by a Zclk counter
...@@ -54,30 +132,36 @@ static struct sbprof_tb sbp; ...@@ -54,30 +132,36 @@ static struct sbprof_tb sbp;
* overflow. * overflow.
* *
* We map the interrupt for trace_buffer_freeze to handle it on CPU 0. * We map the interrupt for trace_buffer_freeze to handle it on CPU 0.
* */
************************************************************************/
static u_int64_t tb_period; static u64 tb_period;
static void arm_tb(void) static void arm_tb(void)
{ {
u_int64_t scdperfcnt; u64 scdperfcnt;
u_int64_t next = (1ULL << 40) - tb_period; u64 next = (1ULL << 40) - tb_period;
u_int64_t tb_options = M_SCD_TRACE_CFG_FREEZE_FULL; u64 tb_options = M_SCD_TRACE_CFG_FREEZE_FULL;
/* Generate an SCD_PERFCNT interrupt in TB_PERIOD Zclks to
trigger start of trace. XXX vary sampling period */ /*
* Generate an SCD_PERFCNT interrupt in TB_PERIOD Zclks to trigger
*start of trace. XXX vary sampling period
*/
__raw_writeq(0, IOADDR(A_SCD_PERF_CNT_1)); __raw_writeq(0, IOADDR(A_SCD_PERF_CNT_1));
scdperfcnt = __raw_readq(IOADDR(A_SCD_PERF_CNT_CFG)); scdperfcnt = __raw_readq(IOADDR(A_SCD_PERF_CNT_CFG));
/* Unfortunately, in Pass 2 we must clear all counters to knock down
a previous interrupt request. This means that bus profiling /*
requires ALL of the SCD perf counters. */ * Unfortunately, in Pass 2 we must clear all counters to knock down a
* previous interrupt request. This means that bus profiling requires
* ALL of the SCD perf counters.
*/
__raw_writeq((scdperfcnt & ~M_SPC_CFG_SRC1) | __raw_writeq((scdperfcnt & ~M_SPC_CFG_SRC1) |
// keep counters 0,2,3 as is /* keep counters 0,2,3 as is */
M_SPC_CFG_ENABLE | // enable counting M_SPC_CFG_ENABLE | /* enable counting */
M_SPC_CFG_CLEAR | // clear all counters M_SPC_CFG_CLEAR | /* clear all counters */
V_SPC_CFG_SRC1(1), // counter 1 counts cycles V_SPC_CFG_SRC1(1), /* counter 1 counts cycles */
IOADDR(A_SCD_PERF_CNT_CFG)); IOADDR(A_SCD_PERF_CNT_CFG));
__raw_writeq(next, IOADDR(A_SCD_PERF_CNT_1)); __raw_writeq(next, IOADDR(A_SCD_PERF_CNT_1));
/* Reset the trace buffer */ /* Reset the trace buffer */
__raw_writeq(M_SCD_TRACE_CFG_RESET, IOADDR(A_SCD_TRACE_CFG)); __raw_writeq(M_SCD_TRACE_CFG_RESET, IOADDR(A_SCD_TRACE_CFG));
#if 0 && defined(M_SCD_TRACE_CFG_FORCECNT) #if 0 && defined(M_SCD_TRACE_CFG_FORCECNT)
...@@ -91,43 +175,45 @@ static void arm_tb(void) ...@@ -91,43 +175,45 @@ static void arm_tb(void)
static irqreturn_t sbprof_tb_intr(int irq, void *dev_id) static irqreturn_t sbprof_tb_intr(int irq, void *dev_id)
{ {
int i; int i;
DBG(printk(DEVNAME ": tb_intr\n"));
pr_debug(DEVNAME ": tb_intr\n");
if (sbp.next_tb_sample < MAX_TB_SAMPLES) { if (sbp.next_tb_sample < MAX_TB_SAMPLES) {
/* XXX should use XKPHYS to make writes bypass L2 */ /* XXX should use XKPHYS to make writes bypass L2 */
u_int64_t *p = sbp.sbprof_tbbuf[sbp.next_tb_sample++]; u64 *p = sbp.sbprof_tbbuf[sbp.next_tb_sample++];
/* Read out trace */ /* Read out trace */
__raw_writeq(M_SCD_TRACE_CFG_START_READ, __raw_writeq(M_SCD_TRACE_CFG_START_READ,
IOADDR(A_SCD_TRACE_CFG)); IOADDR(A_SCD_TRACE_CFG));
__asm__ __volatile__ ("sync" : : : "memory"); __asm__ __volatile__ ("sync" : : : "memory");
/* Loop runs backwards because bundles are read out in reverse order */ /* Loop runs backwards because bundles are read out in reverse order */
for (i = 256 * 6; i > 0; i -= 6) { for (i = 256 * 6; i > 0; i -= 6) {
// Subscripts decrease to put bundle in the order /* Subscripts decrease to put bundle in the order */
// t0 lo, t0 hi, t1 lo, t1 hi, t2 lo, t2 hi /* t0 lo, t0 hi, t1 lo, t1 hi, t2 lo, t2 hi */
p[i - 1] = __raw_readq(IOADDR(A_SCD_TRACE_READ)); p[i - 1] = __raw_readq(IOADDR(A_SCD_TRACE_READ));
// read t2 hi /* read t2 hi */
p[i - 2] = __raw_readq(IOADDR(A_SCD_TRACE_READ)); p[i - 2] = __raw_readq(IOADDR(A_SCD_TRACE_READ));
// read t2 lo /* read t2 lo */
p[i - 3] = __raw_readq(IOADDR(A_SCD_TRACE_READ)); p[i - 3] = __raw_readq(IOADDR(A_SCD_TRACE_READ));
// read t1 hi /* read t1 hi */
p[i - 4] = __raw_readq(IOADDR(A_SCD_TRACE_READ)); p[i - 4] = __raw_readq(IOADDR(A_SCD_TRACE_READ));
// read t1 lo /* read t1 lo */
p[i - 5] = __raw_readq(IOADDR(A_SCD_TRACE_READ)); p[i - 5] = __raw_readq(IOADDR(A_SCD_TRACE_READ));
// read t0 hi /* read t0 hi */
p[i - 6] = __raw_readq(IOADDR(A_SCD_TRACE_READ)); p[i - 6] = __raw_readq(IOADDR(A_SCD_TRACE_READ));
// read t0 lo /* read t0 lo */
} }
if (!sbp.tb_enable) { if (!sbp.tb_enable) {
DBG(printk(DEVNAME ": tb_intr shutdown\n")); pr_debug(DEVNAME ": tb_intr shutdown\n");
__raw_writeq(M_SCD_TRACE_CFG_RESET, __raw_writeq(M_SCD_TRACE_CFG_RESET,
IOADDR(A_SCD_TRACE_CFG)); IOADDR(A_SCD_TRACE_CFG));
sbp.tb_armed = 0; sbp.tb_armed = 0;
wake_up(&sbp.tb_sync); wake_up(&sbp.tb_sync);
} else { } else {
arm_tb(); // knock down current interrupt and get another one later arm_tb(); /* knock down current interrupt and get another one later */
} }
} else { } else {
/* No more trace buffer samples */ /* No more trace buffer samples */
DBG(printk(DEVNAME ": tb_intr full\n")); pr_debug(DEVNAME ": tb_intr full\n");
__raw_writeq(M_SCD_TRACE_CFG_RESET, IOADDR(A_SCD_TRACE_CFG)); __raw_writeq(M_SCD_TRACE_CFG_RESET, IOADDR(A_SCD_TRACE_CFG));
sbp.tb_armed = 0; sbp.tb_armed = 0;
if (!sbp.tb_enable) { if (!sbp.tb_enable) {
...@@ -135,6 +221,7 @@ static irqreturn_t sbprof_tb_intr(int irq, void *dev_id) ...@@ -135,6 +221,7 @@ static irqreturn_t sbprof_tb_intr(int irq, void *dev_id)
} }
wake_up(&sbp.tb_read); wake_up(&sbp.tb_read);
} }
return IRQ_HANDLED; return IRQ_HANDLED;
} }
...@@ -144,23 +231,30 @@ static irqreturn_t sbprof_pc_intr(int irq, void *dev_id) ...@@ -144,23 +231,30 @@ static irqreturn_t sbprof_pc_intr(int irq, void *dev_id)
return IRQ_NONE; return IRQ_NONE;
} }
int sbprof_zbprof_start(struct file *filp) /*
* Requires: Already called zclk_timer_init with a value that won't
* saturate 40 bits. No subsequent use of SCD performance counters
* or trace buffer.
*/
static int sbprof_zbprof_start(struct file *filp)
{ {
u_int64_t scdperfcnt; u64 scdperfcnt;
int err;
if (sbp.tb_enable) if (xchg(&sbp.tb_enable, 1))
return -EBUSY; return -EBUSY;
DBG(printk(DEVNAME ": starting\n")); pr_debug(DEVNAME ": starting\n");
sbp.tb_enable = 1;
sbp.next_tb_sample = 0; sbp.next_tb_sample = 0;
filp->f_pos = 0; filp->f_pos = 0;
if (request_irq err = request_irq(K_INT_TRACE_FREEZE, sbprof_tb_intr, 0,
(K_INT_TRACE_FREEZE, sbprof_tb_intr, 0, DEVNAME " trace freeze", &sbp)) { DEVNAME " trace freeze", &sbp);
if (err)
return -EBUSY; return -EBUSY;
}
/* Make sure there isn't a perf-cnt interrupt waiting */ /* Make sure there isn't a perf-cnt interrupt waiting */
scdperfcnt = __raw_readq(IOADDR(A_SCD_PERF_CNT_CFG)); scdperfcnt = __raw_readq(IOADDR(A_SCD_PERF_CNT_CFG));
/* Disable and clear counters, override SRC_1 */ /* Disable and clear counters, override SRC_1 */
...@@ -168,18 +262,21 @@ int sbprof_zbprof_start(struct file *filp) ...@@ -168,18 +262,21 @@ int sbprof_zbprof_start(struct file *filp)
M_SPC_CFG_ENABLE | M_SPC_CFG_CLEAR | V_SPC_CFG_SRC1(1), M_SPC_CFG_ENABLE | M_SPC_CFG_CLEAR | V_SPC_CFG_SRC1(1),
IOADDR(A_SCD_PERF_CNT_CFG)); IOADDR(A_SCD_PERF_CNT_CFG));
/* We grab this interrupt to prevent others from trying to use /*
it, even though we don't want to service the interrupts * We grab this interrupt to prevent others from trying to use it, even
(they only feed into the trace-on-interrupt mechanism) */ * though we don't want to service the interrupts (they only feed into
if (request_irq * the trace-on-interrupt mechanism)
(K_INT_PERF_CNT, sbprof_pc_intr, 0, DEVNAME " scd perfcnt", &sbp)) { */
free_irq(K_INT_TRACE_FREEZE, &sbp); err = request_irq(K_INT_PERF_CNT, sbprof_pc_intr, 0,
return -EBUSY; DEVNAME " scd perfcnt", &sbp);
} if (err)
goto out_free_irq;
/* I need the core to mask these, but the interrupt mapper to
pass them through. I am exploiting my knowledge that /*
cp0_status masks out IP[5]. krw */ * I need the core to mask these, but the interrupt mapper to pass them
* through. I am exploiting my knowledge that cp0_status masks out
* IP[5]. krw
*/
__raw_writeq(K_INT_MAP_I3, __raw_writeq(K_INT_MAP_I3,
IOADDR(A_IMR_REGISTER(0, R_IMR_INTERRUPT_MAP_BASE) + IOADDR(A_IMR_REGISTER(0, R_IMR_INTERRUPT_MAP_BASE) +
(K_INT_PERF_CNT << 3))); (K_INT_PERF_CNT << 3)));
...@@ -201,7 +298,7 @@ int sbprof_zbprof_start(struct file *filp) ...@@ -201,7 +298,7 @@ int sbprof_zbprof_start(struct file *filp)
__raw_writeq(0, IOADDR(A_ADDR_TRAP_CFG_3)); __raw_writeq(0, IOADDR(A_ADDR_TRAP_CFG_3));
/* Initialize Trace Event 0-7 */ /* Initialize Trace Event 0-7 */
// when interrupt /* when interrupt */
__raw_writeq(M_SCD_TREVT_INTERRUPT, IOADDR(A_SCD_TRACE_EVENT_0)); __raw_writeq(M_SCD_TREVT_INTERRUPT, IOADDR(A_SCD_TRACE_EVENT_0));
__raw_writeq(0, IOADDR(A_SCD_TRACE_EVENT_1)); __raw_writeq(0, IOADDR(A_SCD_TRACE_EVENT_1));
__raw_writeq(0, IOADDR(A_SCD_TRACE_EVENT_2)); __raw_writeq(0, IOADDR(A_SCD_TRACE_EVENT_2));
...@@ -212,10 +309,10 @@ int sbprof_zbprof_start(struct file *filp) ...@@ -212,10 +309,10 @@ int sbprof_zbprof_start(struct file *filp)
__raw_writeq(0, IOADDR(A_SCD_TRACE_EVENT_7)); __raw_writeq(0, IOADDR(A_SCD_TRACE_EVENT_7));
/* Initialize Trace Sequence 0-7 */ /* Initialize Trace Sequence 0-7 */
// Start on event 0 (interrupt) /* Start on event 0 (interrupt) */
__raw_writeq(V_SCD_TRSEQ_FUNC_START | 0x0fff, __raw_writeq(V_SCD_TRSEQ_FUNC_START | 0x0fff,
IOADDR(A_SCD_TRACE_SEQUENCE_0)); IOADDR(A_SCD_TRACE_SEQUENCE_0));
// dsamp when d used | asamp when a used /* dsamp when d used | asamp when a used */
__raw_writeq(M_SCD_TRSEQ_ASAMPLE | M_SCD_TRSEQ_DSAMPLE | __raw_writeq(M_SCD_TRSEQ_ASAMPLE | M_SCD_TRSEQ_DSAMPLE |
K_SCD_TRSEQ_TRIGGER_ALL, K_SCD_TRSEQ_TRIGGER_ALL,
IOADDR(A_SCD_TRACE_SEQUENCE_1)); IOADDR(A_SCD_TRACE_SEQUENCE_1));
...@@ -232,33 +329,41 @@ int sbprof_zbprof_start(struct file *filp) ...@@ -232,33 +329,41 @@ int sbprof_zbprof_start(struct file *filp)
arm_tb(); arm_tb();
DBG(printk(DEVNAME ": done starting\n")); pr_debug(DEVNAME ": done starting\n");
return 0; return 0;
out_free_irq:
free_irq(K_INT_TRACE_FREEZE, &sbp);
return err;
} }
int sbprof_zbprof_stop(void) static int sbprof_zbprof_stop(void)
{ {
DEFINE_WAIT(wait); int err;
DBG(printk(DEVNAME ": stopping\n"));
pr_debug(DEVNAME ": stopping\n");
if (sbp.tb_enable) { if (sbp.tb_enable) {
/*
* XXXKW there is a window here where the intr handler may run,
* see the disable, and do the wake_up before this sleep
* happens.
*/
pr_debug(DEVNAME ": wait for disarm\n");
err = wait_event_interruptible(sbp.tb_sync, !sbp.tb_armed);
pr_debug(DEVNAME ": disarm complete, stat %d\n", err);
if (err)
return err;
sbp.tb_enable = 0; sbp.tb_enable = 0;
/* XXXKW there is a window here where the intr handler
may run, see the disable, and do the wake_up before
this sleep happens. */
if (sbp.tb_armed) {
DBG(printk(DEVNAME ": wait for disarm\n"));
prepare_to_wait(&sbp.tb_sync, &wait, TASK_INTERRUPTIBLE);
schedule();
finish_wait(&sbp.tb_sync, &wait);
DBG(printk(DEVNAME ": disarm complete\n"));
}
free_irq(K_INT_TRACE_FREEZE, &sbp); free_irq(K_INT_TRACE_FREEZE, &sbp);
free_irq(K_INT_PERF_CNT, &sbp); free_irq(K_INT_PERF_CNT, &sbp);
} }
DBG(printk(DEVNAME ": done stopping\n")); pr_debug(DEVNAME ": done stopping\n");
return 0; return 0;
} }
...@@ -268,42 +373,45 @@ static int sbprof_tb_open(struct inode *inode, struct file *filp) ...@@ -268,42 +373,45 @@ static int sbprof_tb_open(struct inode *inode, struct file *filp)
int minor; int minor;
minor = iminor(inode); minor = iminor(inode);
if (minor != 0) { if (minor != 0)
return -ENODEV; return -ENODEV;
}
if (sbp.open) { if (xchg(&sbp.open, SB_OPENING) != SB_CLOSED)
return -EBUSY; return -EBUSY;
}
memset(&sbp, 0, sizeof(struct sbprof_tb)); memset(&sbp, 0, sizeof(struct sbprof_tb));
sbp.sbprof_tbbuf = vmalloc(MAX_TBSAMPLE_BYTES); sbp.sbprof_tbbuf = vmalloc(MAX_TBSAMPLE_BYTES);
if (!sbp.sbprof_tbbuf) { if (!sbp.sbprof_tbbuf)
return -ENOMEM; return -ENOMEM;
}
memset(sbp.sbprof_tbbuf, 0, MAX_TBSAMPLE_BYTES); memset(sbp.sbprof_tbbuf, 0, MAX_TBSAMPLE_BYTES);
init_waitqueue_head(&sbp.tb_sync); init_waitqueue_head(&sbp.tb_sync);
init_waitqueue_head(&sbp.tb_read); init_waitqueue_head(&sbp.tb_read);
sbp.open = 1; mutex_init(&sbp.lock);
sbp.open = SB_OPEN;
return 0; return 0;
} }
static int sbprof_tb_release(struct inode *inode, struct file *filp) static int sbprof_tb_release(struct inode *inode, struct file *filp)
{ {
int minor; int minor = iminor(inode);
minor = iminor(inode); if (minor != 0 || !sbp.open)
if (minor != 0 || !sbp.open) {
return -ENODEV; return -ENODEV;
}
if (sbp.tb_armed || sbp.tb_enable) { mutex_lock(&sbp.lock);
if (sbp.tb_armed || sbp.tb_enable)
sbprof_zbprof_stop(); sbprof_zbprof_stop();
}
vfree(sbp.sbprof_tbbuf); vfree(sbp.sbprof_tbbuf);
sbp.open = 0; sbp.open = 0;
mutex_unlock(&sbp.lock);
return 0; return 0;
} }
...@@ -311,21 +419,35 @@ static ssize_t sbprof_tb_read(struct file *filp, char *buf, ...@@ -311,21 +419,35 @@ static ssize_t sbprof_tb_read(struct file *filp, char *buf,
size_t size, loff_t *offp) size_t size, loff_t *offp)
{ {
int cur_sample, sample_off, cur_count, sample_left; int cur_sample, sample_off, cur_count, sample_left;
char *src;
int count = 0;
char *dest = buf;
long cur_off = *offp; long cur_off = *offp;
char *dest = buf;
int count = 0;
char *src;
if (!access_ok(VERIFY_WRITE, buf, size))
return -EFAULT;
mutex_lock(&sbp.lock);
count = 0; count = 0;
cur_sample = cur_off / TB_SAMPLE_SIZE; cur_sample = cur_off / TB_SAMPLE_SIZE;
sample_off = cur_off % TB_SAMPLE_SIZE; sample_off = cur_off % TB_SAMPLE_SIZE;
sample_left = TB_SAMPLE_SIZE - sample_off; sample_left = TB_SAMPLE_SIZE - sample_off;
while (size && (cur_sample < sbp.next_tb_sample)) { while (size && (cur_sample < sbp.next_tb_sample)) {
int err;
cur_count = size < sample_left ? size : sample_left; cur_count = size < sample_left ? size : sample_left;
src = (char *)(((long)sbp.sbprof_tbbuf[cur_sample])+sample_off); src = (char *)(((long)sbp.sbprof_tbbuf[cur_sample])+sample_off);
copy_to_user(dest, src, cur_count); err = __copy_to_user(dest, src, cur_count);
DBG(printk(DEVNAME ": read from sample %d, %d bytes\n", if (err) {
cur_sample, cur_count)); *offp = cur_off + cur_count - err;
mutex_unlock(&sbp.lock);
return err;
}
pr_debug(DEVNAME ": read from sample %d, %d bytes\n",
cur_sample, cur_count);
size -= cur_count; size -= cur_count;
sample_left -= cur_count; sample_left -= cur_count;
if (!sample_left) { if (!sample_left) {
...@@ -339,37 +461,43 @@ static ssize_t sbprof_tb_read(struct file *filp, char *buf, ...@@ -339,37 +461,43 @@ static ssize_t sbprof_tb_read(struct file *filp, char *buf,
dest += cur_count; dest += cur_count;
count += cur_count; count += cur_count;
} }
*offp = cur_off; *offp = cur_off;
mutex_unlock(&sbp.lock);
return count; return count;
} }
static long sbprof_tb_ioctl(struct file *filp, static long sbprof_tb_ioctl(struct file *filp, unsigned int command,
unsigned int command, unsigned long arg)
unsigned long arg)
{ {
int error = 0; int error = 0;
lock_kernel();
switch (command) { switch (command) {
case SBPROF_ZBSTART: case SBPROF_ZBSTART:
mutex_lock(&sbp.lock);
error = sbprof_zbprof_start(filp); error = sbprof_zbprof_start(filp);
mutex_unlock(&sbp.lock);
break; break;
case SBPROF_ZBSTOP: case SBPROF_ZBSTOP:
mutex_lock(&sbp.lock);
error = sbprof_zbprof_stop(); error = sbprof_zbprof_stop();
mutex_unlock(&sbp.lock);
break; break;
case SBPROF_ZBWAITFULL: case SBPROF_ZBWAITFULL:
DEFINE_WAIT(wait); error = wait_event_interruptible(sbp.tb_read, TB_FULL);
prepare_to_wait(&sbp.tb_read, &wait, TASK_INTERRUPTIBLE); if (error)
schedule(); break;
finish_wait(&sbp.tb_read, &wait);
/* XXXKW check if interrupted? */ error = put_user(TB_FULL, (int *) arg);
return put_user(TB_FULL, (int *) arg); break;
default: default:
error = -EINVAL; error = -EINVAL;
break; break;
} }
unlock_kernel();
return error; return error;
} }
...@@ -384,23 +512,60 @@ static const struct file_operations sbprof_tb_fops = { ...@@ -384,23 +512,60 @@ static const struct file_operations sbprof_tb_fops = {
.mmap = NULL, .mmap = NULL,
}; };
static struct class *tb_class;
static struct device *tb_dev;
static int __init sbprof_tb_init(void) static int __init sbprof_tb_init(void)
{ {
struct device *dev;
struct class *tbc;
int err;
if (register_chrdev(SBPROF_TB_MAJOR, DEVNAME, &sbprof_tb_fops)) { if (register_chrdev(SBPROF_TB_MAJOR, DEVNAME, &sbprof_tb_fops)) {
printk(KERN_WARNING DEVNAME ": initialization failed (dev %d)\n", printk(KERN_WARNING DEVNAME ": initialization failed (dev %d)\n",
SBPROF_TB_MAJOR); SBPROF_TB_MAJOR);
return -EIO; return -EIO;
} }
tbc = class_create(THIS_MODULE, "sb_tracebuffer");
if (IS_ERR(tbc)) {
err = PTR_ERR(tbc);
goto out_chrdev;
}
tb_class = tbc;
dev = device_create(tbc, NULL, MKDEV(SBPROF_TB_MAJOR, 0), "tb");
if (IS_ERR(dev)) {
err = PTR_ERR(dev);
goto out_class;
}
tb_dev = dev;
sbp.open = 0; sbp.open = 0;
tb_period = zbbus_mhz * 10000LL; tb_period = zbbus_mhz * 10000LL;
printk(KERN_INFO DEVNAME ": initialized - tb_period = %lld\n", tb_period); pr_info(DEVNAME ": initialized - tb_period = %lld\n", tb_period);
return 0; return 0;
out_class:
class_destroy(tb_class);
out_chrdev:
unregister_chrdev(SBPROF_TB_MAJOR, DEVNAME);
return err;
} }
static void __exit sbprof_tb_cleanup(void) static void __exit sbprof_tb_cleanup(void)
{ {
device_destroy(tb_class, MKDEV(SBPROF_TB_MAJOR, 0));
unregister_chrdev(SBPROF_TB_MAJOR, DEVNAME); unregister_chrdev(SBPROF_TB_MAJOR, DEVNAME);
class_destroy(tb_class);
} }
module_init(sbprof_tb_init); module_init(sbprof_tb_init);
module_exit(sbprof_tb_cleanup); module_exit(sbprof_tb_cleanup);
MODULE_ALIAS_CHARDEV_MAJOR(SBPROF_TB_MAJOR);
MODULE_AUTHOR("Ralf Baechle <ralf@linux-mips.org>");
MODULE_LICENSE("GPL");
arch/mips/sibyte/sb1250/setup.c
浏览文件 @ bb9b813b
...@@ -16,6 +16,7 @@ ...@@ -16,6 +16,7 @@
* Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
*/ */
#include <linux/init.h> #include <linux/init.h>
#include <linux/module.h>
#include <linux/kernel.h> #include <linux/kernel.h>
#include <linux/reboot.h> #include <linux/reboot.h>
#include <linux/string.h> #include <linux/string.h>
...@@ -32,6 +33,7 @@ unsigned int soc_pass; ...@@ -32,6 +33,7 @@ unsigned int soc_pass;
unsigned int soc_type; unsigned int soc_type;
unsigned int periph_rev; unsigned int periph_rev;
unsigned int zbbus_mhz; unsigned int zbbus_mhz;
EXPORT_SYMBOL(zbbus_mhz);
static char *soc_str; static char *soc_str;
static char *pass_str; static char *pass_str;
......
include/asm-mips/sibyte/trace_prof.h 已删除 100644 → 0
浏览文件 @ ca6f5494
/*
* Copyright (C) 2001 Broadcom Corporation
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version 2
* of the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
*/
#ifndef __ASM_SIBYTE_TRACE_PROF_H
#define __ASM_SIBYTE_TRACE_PROF_H
#undef DBG
#if SBPROF_TB_DEBUG
#define DBG(a) a
#else
#define DBG(a)
#endif
#define SBPROF_TB_MAJOR 240
#define DEVNAME "bcm1250_tbprof"
typedef u_int64_t tb_sample_t[6*256];
struct sbprof_tb {
int open;
tb_sample_t *sbprof_tbbuf;
int next_tb_sample;
volatile int tb_enable;
volatile int tb_armed;
wait_queue_head_t tb_sync;
wait_queue_head_t tb_read;
};
#define MAX_SAMPLE_BYTES (24*1024*1024)
#define MAX_TBSAMPLE_BYTES (12*1024*1024)
#define MAX_SAMPLES (MAX_SAMPLE_BYTES/sizeof(u_int32_t))
#define TB_SAMPLE_SIZE (sizeof(tb_sample_t))
#define MAX_TB_SAMPLES (MAX_TBSAMPLE_BYTES/TB_SAMPLE_SIZE)
/* IOCTLs */
#define SBPROF_ZBSTART _IOW('s', 0, int)
#define SBPROF_ZBSTOP _IOW('s', 1, int)
#define SBPROF_ZBWAITFULL _IOW('s', 2, int)
/***************************************************************************
* Routines for gathering ZBbus profiles using trace buffer
***************************************************************************/
/* Requires: Already called zclk_timer_init with a value that won't
saturate 40 bits. No subsequent use of SCD performance counters
or trace buffer.
Effect: Starts gathering random ZBbus profiles using trace buffer. */
extern int sbprof_zbprof_start(struct file *filp);
/* Effect: Stops collection of ZBbus profiles */
extern int sbprof_zbprof_stop(void);
/***************************************************************************
* Routines for using 40-bit SCD cycle counter
*
* Client responsible for either handling interrupts or making sure
* the cycles counter never saturates, e.g., by doing
* zclk_timer_init(0) at least every 2^40 - 1 ZCLKs.
***************************************************************************/
/* Configures SCD counter 0 to count ZCLKs starting from val;
Configures SCD counters1,2,3 to count nothing.
Must not be called while gathering ZBbus profiles.
unsigned long long val; */
#define zclk_timer_init(val) \
__asm__ __volatile__ (".set push;" \
".set mips64;" \
"la $8, 0xb00204c0;" /* SCD perf_cnt_cfg */ \
"sd %0, 0x10($8);" /* write val to counter0 */ \
"sd %1, 0($8);" /* config counter0 for zclks*/ \
".set pop" \
: /* no outputs */ \
/* enable, counter0 */ \
: /* inputs */ "r"(val), "r" ((1ULL << 33) | 1ULL) \
: /* modifies */ "$8" )
/* Reads SCD counter 0 and puts result in value
unsigned long long val; */
#define zclk_get(val) \
__asm__ __volatile__ (".set push;" \
".set mips64;" \
"la $8, 0xb00204c0;" /* SCD perf_cnt_cfg */ \
"ld %0, 0x10($8);" /* write val to counter0 */ \
".set pop" \
: /* outputs */ "=r"(val) \
: /* inputs */ \
: /* modifies */ "$8" )
#endif /* __ASM_SIBYTE_TRACE_PROF_H */
Markdown is supported
0% 或 .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑！
想要评论请 注册 或