提交 bb63b421 编写于 作者: Y Yinghai Lu 提交者: Ingo Molnar

x86 pci: remove checking type for mmconfig probe

doesn't need to check if it is type1 or type2, we can use raw_pci_ops
directly.

also make pci_direct_conf1 static again.

anyway is there system with type 2 and mmconf support?
Signed-off-by: NYinghai Lu <yinghai.lu@sun.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
上级 d2ebdf4b
...@@ -258,7 +258,8 @@ void __init pci_direct_init(int type) ...@@ -258,7 +258,8 @@ void __init pci_direct_init(int type)
{ {
if (type == 0) if (type == 0)
return; return;
printk(KERN_INFO "PCI: Using configuration type %d\n", type); printk(KERN_INFO "PCI: Using configuration type %d for base access\n",
type);
if (type == 1) if (type == 1)
raw_pci_ops = &pci_direct_conf1; raw_pci_ops = &pci_direct_conf1;
else else
...@@ -275,8 +276,10 @@ int __init pci_direct_probe(void) ...@@ -275,8 +276,10 @@ int __init pci_direct_probe(void)
if (!region) if (!region)
goto type2; goto type2;
if (pci_check_type1()) if (pci_check_type1()) {
raw_pci_ops = &pci_direct_conf1;
return 1; return 1;
}
release_resource(region); release_resource(region);
type2: type2:
...@@ -290,7 +293,6 @@ int __init pci_direct_probe(void) ...@@ -290,7 +293,6 @@ int __init pci_direct_probe(void)
goto fail2; goto fail2;
if (pci_check_type2()) { if (pci_check_type2()) {
printk(KERN_INFO "PCI: Using configuration type 2\n");
raw_pci_ops = &pci_direct_conf2; raw_pci_ops = &pci_direct_conf2;
return 2; return 2;
} }
......
...@@ -6,14 +6,13 @@ ...@@ -6,14 +6,13 @@
in the right sequence from here. */ in the right sequence from here. */
static __init int pci_access_init(void) static __init int pci_access_init(void)
{ {
int type __maybe_unused = 0;
#ifdef CONFIG_PCI_DIRECT #ifdef CONFIG_PCI_DIRECT
int type = 0;
type = pci_direct_probe(); type = pci_direct_probe();
#endif #endif
pci_mmcfg_early_init(type); pci_mmcfg_early_init();
if (raw_pci_ops)
return 0;
#ifdef CONFIG_PCI_BIOS #ifdef CONFIG_PCI_BIOS
pci_pcbios_init(); pci_pcbios_init();
#endif #endif
...@@ -26,7 +25,7 @@ static __init int pci_access_init(void) ...@@ -26,7 +25,7 @@ static __init int pci_access_init(void)
#ifdef CONFIG_PCI_DIRECT #ifdef CONFIG_PCI_DIRECT
pci_direct_init(type); pci_direct_init(type);
#endif #endif
if (!raw_pci_ops) if (!raw_pci_ops && !raw_pci_ext_ops)
printk(KERN_ERR printk(KERN_ERR
"PCI: Fatal: No config space access function found\n"); "PCI: Fatal: No config space access function found\n");
......
...@@ -28,7 +28,7 @@ static int __initdata pci_mmcfg_resources_inserted; ...@@ -28,7 +28,7 @@ static int __initdata pci_mmcfg_resources_inserted;
static const char __init *pci_mmcfg_e7520(void) static const char __init *pci_mmcfg_e7520(void)
{ {
u32 win; u32 win;
pci_direct_conf1.read(0, 0, PCI_DEVFN(0,0), 0xce, 2, &win); raw_pci_ops->read(0, 0, PCI_DEVFN(0, 0), 0xce, 2, &win);
win = win & 0xf000; win = win & 0xf000;
if(win == 0x0000 || win == 0xf000) if(win == 0x0000 || win == 0xf000)
...@@ -53,7 +53,7 @@ static const char __init *pci_mmcfg_intel_945(void) ...@@ -53,7 +53,7 @@ static const char __init *pci_mmcfg_intel_945(void)
pci_mmcfg_config_num = 1; pci_mmcfg_config_num = 1;
pci_direct_conf1.read(0, 0, PCI_DEVFN(0,0), 0x48, 4, &pciexbar); raw_pci_ops->read(0, 0, PCI_DEVFN(0, 0), 0x48, 4, &pciexbar);
/* Enable bit */ /* Enable bit */
if (!(pciexbar & 1)) if (!(pciexbar & 1))
...@@ -179,6 +179,9 @@ static int __init pci_mmcfg_check_hostbridge(void) ...@@ -179,6 +179,9 @@ static int __init pci_mmcfg_check_hostbridge(void)
int i; int i;
const char *name; const char *name;
if (!raw_pci_ops)
return 0;
pci_mmcfg_config_num = 0; pci_mmcfg_config_num = 0;
pci_mmcfg_config = NULL; pci_mmcfg_config = NULL;
name = NULL; name = NULL;
...@@ -186,7 +189,7 @@ static int __init pci_mmcfg_check_hostbridge(void) ...@@ -186,7 +189,7 @@ static int __init pci_mmcfg_check_hostbridge(void)
for (i = 0; !name && i < ARRAY_SIZE(pci_mmcfg_probes); i++) { for (i = 0; !name && i < ARRAY_SIZE(pci_mmcfg_probes); i++) {
bus = pci_mmcfg_probes[i].bus; bus = pci_mmcfg_probes[i].bus;
devfn = pci_mmcfg_probes[i].devfn; devfn = pci_mmcfg_probes[i].devfn;
pci_direct_conf1.read(0, bus, devfn, 0, 4, &l); raw_pci_ops->read(0, bus, devfn, 0, 4, &l);
vendor = l & 0xffff; vendor = l & 0xffff;
device = (l >> 16) & 0xffff; device = (l >> 16) & 0xffff;
...@@ -304,7 +307,7 @@ static int __init is_acpi_reserved(unsigned long start, unsigned long end) ...@@ -304,7 +307,7 @@ static int __init is_acpi_reserved(unsigned long start, unsigned long end)
return mcfg_res.flags; return mcfg_res.flags;
} }
static void __init pci_mmcfg_reject_broken(int type, int early) static void __init pci_mmcfg_reject_broken(int early)
{ {
typeof(pci_mmcfg_config[0]) *cfg; typeof(pci_mmcfg_config[0]) *cfg;
int i; int i;
...@@ -342,8 +345,8 @@ static void __init pci_mmcfg_reject_broken(int type, int early) ...@@ -342,8 +345,8 @@ static void __init pci_mmcfg_reject_broken(int type, int early)
" reserved in ACPI motherboard resources\n", " reserved in ACPI motherboard resources\n",
cfg->address); cfg->address);
/* Don't try to do this check unless configuration /* Don't try to do this check unless configuration
type 1 is available. */ type 1 is available. how about type 2 ?*/
if (type == 1 && e820_all_mapped(cfg->address, if (raw_pci_ops && e820_all_mapped(cfg->address,
cfg->address + size - 1, cfg->address + size - 1,
E820_RESERVED)) { E820_RESERVED)) {
printk(KERN_NOTICE printk(KERN_NOTICE
...@@ -368,7 +371,7 @@ static void __init pci_mmcfg_reject_broken(int type, int early) ...@@ -368,7 +371,7 @@ static void __init pci_mmcfg_reject_broken(int type, int early)
static int __initdata known_bridge; static int __initdata known_bridge;
void __init __pci_mmcfg_init(int type, int early) void __init __pci_mmcfg_init(int early)
{ {
/* MMCONFIG disabled */ /* MMCONFIG disabled */
if ((pci_probe & PCI_PROBE_MMCONF) == 0) if ((pci_probe & PCI_PROBE_MMCONF) == 0)
...@@ -382,14 +385,14 @@ void __init __pci_mmcfg_init(int type, int early) ...@@ -382,14 +385,14 @@ void __init __pci_mmcfg_init(int type, int early)
if (known_bridge) if (known_bridge)
return; return;
if (early && type == 1) { if (early) {
if (pci_mmcfg_check_hostbridge()) if (pci_mmcfg_check_hostbridge())
known_bridge = 1; known_bridge = 1;
} }
if (!known_bridge) { if (!known_bridge) {
acpi_table_parse(ACPI_SIG_MCFG, acpi_parse_mcfg); acpi_table_parse(ACPI_SIG_MCFG, acpi_parse_mcfg);
pci_mmcfg_reject_broken(type, early); pci_mmcfg_reject_broken(early);
} }
if ((pci_mmcfg_config_num == 0) || if ((pci_mmcfg_config_num == 0) ||
...@@ -410,19 +413,14 @@ void __init __pci_mmcfg_init(int type, int early) ...@@ -410,19 +413,14 @@ void __init __pci_mmcfg_init(int type, int early)
} }
} }
void __init pci_mmcfg_early_init(int type) void __init pci_mmcfg_early_init(void)
{ {
__pci_mmcfg_init(type, 1); __pci_mmcfg_init(1);
} }
void __init pci_mmcfg_late_init(void) void __init pci_mmcfg_late_init(void)
{ {
int type = 0; __pci_mmcfg_init(0);
if (pci_probe & PCI_PROBE_CONF1)
type = 1;
__pci_mmcfg_init(type, 0);
} }
static int __init pci_mmcfg_late_insert_resources(void) static int __init pci_mmcfg_late_insert_resources(void)
......
...@@ -1055,10 +1055,10 @@ extern unsigned long pci_cardbus_mem_size; ...@@ -1055,10 +1055,10 @@ extern unsigned long pci_cardbus_mem_size;
extern int pcibios_add_platform_entries(struct pci_dev *dev); extern int pcibios_add_platform_entries(struct pci_dev *dev);
#ifdef CONFIG_PCI_MMCONFIG #ifdef CONFIG_PCI_MMCONFIG
extern void __init pci_mmcfg_early_init(int type); extern void __init pci_mmcfg_early_init(void);
extern void __init pci_mmcfg_late_init(void); extern void __init pci_mmcfg_late_init(void);
#else #else
static inline void pci_mmcfg_early_init(int type) { } static inline void pci_mmcfg_early_init(void) { }
static inline void pci_mmcfg_late_init(void) { } static inline void pci_mmcfg_late_init(void) { }
#endif #endif
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册