提交 ba8f5bab 编写于 作者: L Linus Torvalds

Merge branch 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus

* 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus:
  [MIPS] Treat R14000 like R10000.
  [MIPS] Remove EXPERIMENTAL from PAGE_SIZE_16KB
  [MIPS] Update/Fix instruction definitions
  [MIPS] DSP and MDMX share the same config flag bit.
  [MIPS] Fix deadlock on MP with cache aliases.
  [MIPS] Use generic STABS_DEBUG macro.
  [MIPS] Create consistency in "system type" selection.
  [MIPS] Use generic DWARF_DEBUG
  [MIPS] Fix kgdb exception handler from user mode.
  [MIPS] Update struct sigcontext member names
  [MIPS] Update/fix futex assembly
  [MIPS] Remove support for sysmips(2) SETNAME and MIPS_RDNVRAM operations.
  [MIPS] Fix detection and handling of the 74K processor.
  [MIPS] Add missing 34K processor IDs
  [MIPS] Fix marking buddy of pte global for MIPS32 w/36-bit physical address
  [MIPS] AU1xxx mips_timer_interrupt() fixes
  [MIPS] Fix typo
......@@ -13,7 +13,7 @@ choice
default SGI_IP22
config MIPS_MTX1
bool "Support for 4G Systems MTX-1 board"
bool "4G Systems MTX-1 board"
select DMA_NONCOHERENT
select HW_HAS_PCI
select SOC_AU1500
......@@ -120,7 +120,7 @@ config MIPS_MIRAGE
select SYS_SUPPORTS_LITTLE_ENDIAN
config MIPS_COBALT
bool "Support for Cobalt Server"
bool "Cobalt Server"
select DMA_NONCOHERENT
select HW_HAS_PCI
select I8259
......@@ -132,7 +132,7 @@ config MIPS_COBALT
select SYS_SUPPORTS_LITTLE_ENDIAN
config MACH_DECSTATION
bool "Support for DECstations"
bool "DECstations"
select BOOT_ELF32
select DMA_NONCOHERENT
select EARLY_PRINTK
......@@ -158,7 +158,7 @@ config MACH_DECSTATION
otherwise choose R3000.
config MIPS_EV64120
bool "Support for Galileo EV64120 Evaluation board (EXPERIMENTAL)"
bool "Galileo EV64120 Evaluation board (EXPERIMENTAL)"
depends on EXPERIMENTAL
select DMA_NONCOHERENT
select HW_HAS_PCI
......@@ -175,7 +175,7 @@ config MIPS_EV64120
kernel for this platform.
config MIPS_EV96100
bool "Support for Galileo EV96100 Evaluation board (EXPERIMENTAL)"
bool "Galileo EV96100 Evaluation board (EXPERIMENTAL)"
depends on EXPERIMENTAL
select DMA_NONCOHERENT
select HW_HAS_PCI
......@@ -195,7 +195,7 @@ config MIPS_EV96100
here if you wish to build a kernel for this platform.
config MIPS_IVR
bool "Support for Globespan IVR board"
bool "Globespan IVR board"
select DMA_NONCOHERENT
select HW_HAS_PCI
select ITE_BOARD_GEN
......@@ -211,7 +211,7 @@ config MIPS_IVR
build a kernel for this platform.
config MIPS_ITE8172
bool "Support for ITE 8172G board"
bool "ITE 8172G board"
select DMA_NONCOHERENT
select HW_HAS_PCI
select ITE_BOARD_GEN
......@@ -228,7 +228,7 @@ config MIPS_ITE8172
a kernel for this platform.
config MACH_JAZZ
bool "Support for the Jazz family of machines"
bool "Jazz family of machines"
select ARC
select ARC32
select ARCH_MAY_HAVE_PC_FDC
......@@ -246,7 +246,7 @@ config MACH_JAZZ
Olivetti M700-10 workstations.
config LASAT
bool "Support for LASAT Networks platforms"
bool "LASAT Networks platforms"
select DMA_NONCOHERENT
select HW_HAS_PCI
select MIPS_GT64120
......@@ -258,7 +258,7 @@ config LASAT
select SYS_SUPPORTS_LITTLE_ENDIAN
config MIPS_ATLAS
bool "Support for MIPS Atlas board"
bool "MIPS Atlas board"
select BOOT_ELF32
select DMA_NONCOHERENT
select IRQ_CPU
......@@ -283,7 +283,7 @@ config MIPS_ATLAS
board.
config MIPS_MALTA
bool "Support for MIPS Malta board"
bool "MIPS Malta board"
select ARCH_MAY_HAVE_PC_FDC
select BOOT_ELF32
select HAVE_STD_PC_SERIAL_PORT
......@@ -311,7 +311,7 @@ config MIPS_MALTA
board.
config MIPS_SEAD
bool "Support for MIPS SEAD board (EXPERIMENTAL)"
bool "MIPS SEAD board (EXPERIMENTAL)"
depends on EXPERIMENTAL
select IRQ_CPU
select DMA_NONCOHERENT
......@@ -328,7 +328,7 @@ config MIPS_SEAD
board.
config MIPS_SIM
bool 'Support for MIPS simulator (MIPSsim)'
bool 'MIPS simulator (MIPSsim)'
select DMA_NONCOHERENT
select IRQ_CPU
select SYS_HAS_CPU_MIPS32_R1
......@@ -341,7 +341,7 @@ config MIPS_SIM
emulator.
config MOMENCO_JAGUAR_ATX
bool "Support for Momentum Jaguar board"
bool "Momentum Jaguar board"
select BOOT_ELF32
select DMA_NONCOHERENT
select HW_HAS_PCI
......@@ -361,7 +361,7 @@ config MOMENCO_JAGUAR_ATX
Momentum Computer <http://www.momenco.com/>.
config MOMENCO_OCELOT
bool "Support for Momentum Ocelot board"
bool "Momentum Ocelot board"
select DMA_NONCOHERENT
select HW_HAS_PCI
select IRQ_CPU
......@@ -378,7 +378,7 @@ config MOMENCO_OCELOT
Momentum Computer <http://www.momenco.com/>.
config MOMENCO_OCELOT_3
bool "Support for Momentum Ocelot-3 board"
bool "Momentum Ocelot-3 board"
select BOOT_ELF32
select DMA_NONCOHERENT
select HW_HAS_PCI
......@@ -397,7 +397,7 @@ config MOMENCO_OCELOT_3
PMC-Sierra Rm79000 core.
config MOMENCO_OCELOT_C
bool "Support for Momentum Ocelot-C board"
bool "Momentum Ocelot-C board"
select DMA_NONCOHERENT
select HW_HAS_PCI
select IRQ_CPU
......@@ -414,7 +414,7 @@ config MOMENCO_OCELOT_C
Momentum Computer <http://www.momenco.com/>.
config MOMENCO_OCELOT_G
bool "Support for Momentum Ocelot-G board"
bool "Momentum Ocelot-G board"
select DMA_NONCOHERENT
select HW_HAS_PCI
select IRQ_CPU
......@@ -431,23 +431,23 @@ config MOMENCO_OCELOT_G
Momentum Computer <http://www.momenco.com/>.
config MIPS_XXS1500
bool "Support for MyCable XXS1500 board"
bool "MyCable XXS1500 board"
select DMA_NONCOHERENT
select SOC_AU1500
select SYS_SUPPORTS_LITTLE_ENDIAN
config PNX8550_V2PCI
bool "Support for Philips PNX8550 based Viper2-PCI board"
bool "Philips PNX8550 based Viper2-PCI board"
select PNX8550
select SYS_SUPPORTS_LITTLE_ENDIAN
config PNX8550_JBS
bool "Support for Philips PNX8550 based JBS board"
bool "Philips PNX8550 based JBS board"
select PNX8550
select SYS_SUPPORTS_LITTLE_ENDIAN
config DDB5074
bool "Support for NEC DDB Vrc-5074 (EXPERIMENTAL)"
bool "NEC DDB Vrc-5074 (EXPERIMENTAL)"
depends on EXPERIMENTAL
select DDB5XXX_COMMON
select DMA_NONCOHERENT
......@@ -465,7 +465,7 @@ config DDB5074
evaluation board.
config DDB5476
bool "Support for NEC DDB Vrc-5476"
bool "NEC DDB Vrc-5476"
select DDB5XXX_COMMON
select DMA_NONCOHERENT
select HAVE_STD_PC_SERIAL_PORT
......@@ -486,7 +486,7 @@ config DDB5476
IDE controller, PS2 keyboard, PS2 mouse, etc.
config DDB5477
bool "Support for NEC DDB Vrc-5477"
bool "NEC DDB Vrc-5477"
select DDB5XXX_COMMON
select DMA_NONCOHERENT
select HW_HAS_PCI
......@@ -504,13 +504,13 @@ config DDB5477
ether port USB, AC97, PCI, etc.
config MACH_VR41XX
bool "Support for NEC VR4100 series based machines"
bool "NEC VR41XX-based machines"
select SYS_HAS_CPU_VR41XX
select SYS_SUPPORTS_32BIT_KERNEL
select SYS_SUPPORTS_64BIT_KERNEL if EXPERIMENTAL
config PMC_YOSEMITE
bool "Support for PMC-Sierra Yosemite eval board"
bool "PMC-Sierra Yosemite eval board"
select DMA_COHERENT
select HW_HAS_PCI
select IRQ_CPU
......@@ -527,7 +527,7 @@ config PMC_YOSEMITE
manufactured by PMC-Sierra.
config QEMU
bool "Support for Qemu"
bool "Qemu"
select DMA_COHERENT
select GENERIC_ISA_DMA
select HAVE_STD_PC_SERIAL_PORT
......@@ -547,7 +547,7 @@ config QEMU
can be found at http://www.linux-mips.org/wiki/Qemu.
config SGI_IP22
bool "Support for SGI IP22 (Indy/Indigo2)"
bool "SGI IP22 (Indy/Indigo2)"
select ARC
select ARC32
select BOOT_ELF32
......@@ -567,7 +567,7 @@ config SGI_IP22
that runs on these, say Y here.
config SGI_IP27
bool "Support for SGI IP27 (Origin200/2000)"
bool "SGI IP27 (Origin200/2000)"
select ARC
select ARC64
select BOOT_ELF64
......@@ -583,7 +583,7 @@ config SGI_IP27
here.
config SGI_IP32
bool "Support for SGI IP32 (O2) (EXPERIMENTAL)"
bool "SGI IP32 (O2) (EXPERIMENTAL)"
depends on EXPERIMENTAL
select ARC
select ARC32
......@@ -604,7 +604,7 @@ config SGI_IP32
If you want this kernel to run on SGI O2 workstation, say Y here.
config SIBYTE_BIGSUR
bool "Support for Sibyte BCM91480B-BigSur"
bool "Sibyte BCM91480B-BigSur"
select BOOT_ELF32
select DMA_COHERENT
select PCI_DOMAINS
......@@ -615,7 +615,7 @@ config SIBYTE_BIGSUR
select SYS_SUPPORTS_LITTLE_ENDIAN
config SIBYTE_SWARM
bool "Support for Sibyte BCM91250A-SWARM"
bool "Sibyte BCM91250A-SWARM"
select BOOT_ELF32
select DMA_COHERENT
select SIBYTE_SB1250
......@@ -626,7 +626,7 @@ config SIBYTE_SWARM
select SYS_SUPPORTS_LITTLE_ENDIAN
config SIBYTE_SENTOSA
bool "Support for Sibyte BCM91250E-Sentosa"
bool "Sibyte BCM91250E-Sentosa"
depends on EXPERIMENTAL
select BOOT_ELF32
select DMA_COHERENT
......@@ -637,7 +637,7 @@ config SIBYTE_SENTOSA
select SYS_SUPPORTS_LITTLE_ENDIAN
config SIBYTE_RHONE
bool "Support for Sibyte BCM91125E-Rhone"
bool "Sibyte BCM91125E-Rhone"
depends on EXPERIMENTAL
select BOOT_ELF32
select DMA_COHERENT
......@@ -648,7 +648,7 @@ config SIBYTE_RHONE
select SYS_SUPPORTS_LITTLE_ENDIAN
config SIBYTE_CARMEL
bool "Support for Sibyte BCM91120x-Carmel"
bool "Sibyte BCM91120x-Carmel"
depends on EXPERIMENTAL
select BOOT_ELF32
select DMA_COHERENT
......@@ -659,7 +659,7 @@ config SIBYTE_CARMEL
select SYS_SUPPORTS_LITTLE_ENDIAN
config SIBYTE_PTSWARM
bool "Support for Sibyte BCM91250PT-PTSWARM"
bool "Sibyte BCM91250PT-PTSWARM"
depends on EXPERIMENTAL
select BOOT_ELF32
select DMA_COHERENT
......@@ -671,7 +671,7 @@ config SIBYTE_PTSWARM
select SYS_SUPPORTS_LITTLE_ENDIAN
config SIBYTE_LITTLESUR
bool "Support for Sibyte BCM91250C2-LittleSur"
bool "Sibyte BCM91250C2-LittleSur"
depends on EXPERIMENTAL
select BOOT_ELF32
select DMA_COHERENT
......@@ -683,7 +683,7 @@ config SIBYTE_LITTLESUR
select SYS_SUPPORTS_LITTLE_ENDIAN
config SIBYTE_CRHINE
bool "Support for Sibyte BCM91120C-CRhine"
bool "Sibyte BCM91120C-CRhine"
depends on EXPERIMENTAL
select BOOT_ELF32
select DMA_COHERENT
......@@ -694,7 +694,7 @@ config SIBYTE_CRHINE
select SYS_SUPPORTS_LITTLE_ENDIAN
config SIBYTE_CRHONE
bool "Support for Sibyte BCM91125C-CRhone"
bool "Sibyte BCM91125C-CRhone"
depends on EXPERIMENTAL
select BOOT_ELF32
select DMA_COHERENT
......@@ -706,7 +706,7 @@ config SIBYTE_CRHONE
select SYS_SUPPORTS_LITTLE_ENDIAN
config SNI_RM200_PCI
bool "Support for SNI RM200 PCI"
bool "SNI RM200 PCI"
select ARC
select ARC32
select ARCH_MAY_HAVE_PC_FDC
......@@ -732,7 +732,7 @@ config SNI_RM200_PCI
support this machine type.
config TOSHIBA_JMR3927
bool "Support for Toshiba JMR-TX3927 board"
bool "Toshiba JMR-TX3927 board"
select DMA_NONCOHERENT
select HW_HAS_PCI
select MIPS_TX3927
......@@ -743,7 +743,7 @@ config TOSHIBA_JMR3927
select TOSHIBA_BOARDS
config TOSHIBA_RBTX4927
bool "Support for Toshiba TBTX49[23]7 board"
bool "Toshiba TBTX49[23]7 board"
select DMA_NONCOHERENT
select HAS_TXX9_SERIAL
select HW_HAS_PCI
......@@ -760,7 +760,7 @@ config TOSHIBA_RBTX4927
support this machine type
config TOSHIBA_RBTX4938
bool "Support for Toshiba RBTX4938 board"
bool "Toshiba RBTX4938 board"
select HAVE_STD_PC_SERIAL_PORT
select DMA_NONCOHERENT
select GENERIC_ISA_DMA
......@@ -1411,13 +1411,12 @@ config PAGE_SIZE_8KB
config PAGE_SIZE_16KB
bool "16kB"
depends on EXPERIMENTAL && !CPU_R3000 && !CPU_TX39XX
depends on !CPU_R3000 && !CPU_TX39XX
help
Using 16kB page size will result in higher performance kernel at
the price of higher memory consumption. This option is available on
all non-R3000 family processor. Not that at the time of this
writing this option is still high experimental; there are also
issues with compatibility of user applications.
all non-R3000 family processors. Note that you will need a suitable
Linux distribution to support this.
config PAGE_SIZE_64KB
bool "64kB"
......@@ -1426,8 +1425,7 @@ config PAGE_SIZE_64KB
Using 64kB page size will result in higher performance kernel at
the price of higher memory consumption. This option is available on
all non-R3000 family processor. Not that at the time of this
writing this option is still high experimental; there are also
issues with compatibility of user applications.
writing this option is still high experimental.
endchoice
......
......@@ -68,6 +68,7 @@
extern void set_debug_traps(void);
extern irq_cpustat_t irq_stat [NR_CPUS];
extern void mips_timer_interrupt(struct pt_regs *regs);
static void setup_local_irq(unsigned int irq, int type, int int_req);
static unsigned int startup_irq(unsigned int irq);
......
......@@ -116,6 +116,7 @@ void mips_timer_interrupt(struct pt_regs *regs)
null:
ack_r4ktimer(0);
irq_exit();
}
#ifdef CONFIG_PM
......
......@@ -272,8 +272,8 @@ void output_sc_defines(void)
text("/* Linux sigcontext offsets. */");
offset("#define SC_REGS ", struct sigcontext, sc_regs);
offset("#define SC_FPREGS ", struct sigcontext, sc_fpregs);
offset("#define SC_MDHI ", struct sigcontext, sc_hi);
offset("#define SC_MDLO ", struct sigcontext, sc_lo);
offset("#define SC_MDHI ", struct sigcontext, sc_mdhi);
offset("#define SC_MDLO ", struct sigcontext, sc_mdlo);
offset("#define SC_PC ", struct sigcontext, sc_pc);
offset("#define SC_FPC_CSR ", struct sigcontext, sc_fpc_csr);
linefeed;
......
......@@ -121,6 +121,7 @@ static inline void check_wait(void)
case CPU_24K:
case CPU_25KF:
case CPU_34K:
case CPU_74K:
case CPU_PR4450:
cpu_wait = r4k_wait;
printk(" available.\n");
......@@ -432,6 +433,15 @@ static inline void cpu_probe_legacy(struct cpuinfo_mips *c)
MIPS_CPU_LLSC;
c->tlbsize = 64;
break;
case PRID_IMP_R14000:
c->cputype = CPU_R14000;
c->isa_level = MIPS_CPU_ISA_IV;
c->options = MIPS_CPU_TLB | MIPS_CPU_4K_CACHE | MIPS_CPU_4KEX |
MIPS_CPU_FPU | MIPS_CPU_32FPR |
MIPS_CPU_COUNTER | MIPS_CPU_WATCH |
MIPS_CPU_LLSC;
c->tlbsize = 64;
break;
}
}
......@@ -593,6 +603,9 @@ static inline void cpu_probe_mips(struct cpuinfo_mips *c)
case PRID_IMP_34K:
c->cputype = CPU_34K;
break;
case PRID_IMP_74K:
c->cputype = CPU_74K;
break;
}
}
......
......@@ -101,7 +101,7 @@ FEXPORT(restore_all) # restore full frame
EMT
1:
mfc0 v1, CP0_TCSTATUS
/* We set IXMT above, XOR should cler it here */
/* We set IXMT above, XOR should clear it here */
xori v1, v1, TCSTATUS_IXMT
or v1, v0, v1
mtc0 v1, CP0_TCSTATUS
......
......@@ -54,9 +54,11 @@
*/
mfc0 k0, CP0_CAUSE
andi k0, k0, 0x7c
add k1, k1, k0
PTR_L k0, saved_vectors(k1)
jr k0
#ifdef CONFIG_64BIT
dsll k0, k0, 1
#endif
PTR_L k1, saved_vectors(k0)
jr k1
nop
1:
move k0, sp
......
......@@ -42,6 +42,7 @@ static const char *cpu_name[] = {
[CPU_R8000] = "R8000",
[CPU_R10000] = "R10000",
[CPU_R12000] = "R12000",
[CPU_R14000] = "R14000",
[CPU_R4300] = "R4300",
[CPU_R4650] = "R4650",
[CPU_R4700] = "R4700",
......@@ -74,6 +75,7 @@ static const char *cpu_name[] = {
[CPU_24K] = "MIPS 24K",
[CPU_25KF] = "MIPS 25Kf",
[CPU_34K] = "MIPS 34K",
[CPU_74K] = "MIPS 74K",
[CPU_VR4111] = "NEC VR4111",
[CPU_VR4121] = "NEC VR4121",
[CPU_VR4122] = "NEC VR4122",
......
......@@ -31,7 +31,6 @@ setup_sigcontext(struct pt_regs *regs, struct sigcontext __user *sc)
save_gp_reg(31);
#undef save_gp_reg
#ifdef CONFIG_32BIT
err |= __put_user(regs->hi, &sc->sc_mdhi);
err |= __put_user(regs->lo, &sc->sc_mdlo);
if (cpu_has_dsp) {
......@@ -43,20 +42,6 @@ setup_sigcontext(struct pt_regs *regs, struct sigcontext __user *sc)
err |= __put_user(mflo3(), &sc->sc_lo3);
err |= __put_user(rddsp(DSP_MASK), &sc->sc_dsp);
}
#endif
#ifdef CONFIG_64BIT
err |= __put_user(regs->hi, &sc->sc_hi[0]);
err |= __put_user(regs->lo, &sc->sc_lo[0]);
if (cpu_has_dsp) {
err |= __put_user(mfhi1(), &sc->sc_hi[1]);
err |= __put_user(mflo1(), &sc->sc_lo[1]);
err |= __put_user(mfhi2(), &sc->sc_hi[2]);
err |= __put_user(mflo2(), &sc->sc_lo[2]);
err |= __put_user(mfhi3(), &sc->sc_hi[3]);
err |= __put_user(mflo3(), &sc->sc_lo[3]);
err |= __put_user(rddsp(DSP_MASK), &sc->sc_dsp);
}
#endif
err |= __put_user(!!used_math(), &sc->sc_used_math);
......@@ -92,7 +77,6 @@ restore_sigcontext(struct pt_regs *regs, struct sigcontext __user *sc)
current_thread_info()->restart_block.fn = do_no_restart_syscall;
err |= __get_user(regs->cp0_epc, &sc->sc_pc);
#ifdef CONFIG_32BIT
err |= __get_user(regs->hi, &sc->sc_mdhi);
err |= __get_user(regs->lo, &sc->sc_mdlo);
if (cpu_has_dsp) {
......@@ -104,20 +88,6 @@ restore_sigcontext(struct pt_regs *regs, struct sigcontext __user *sc)
err |= __get_user(treg, &sc->sc_lo3); mtlo3(treg);
err |= __get_user(treg, &sc->sc_dsp); wrdsp(treg, DSP_MASK);
}
#endif
#ifdef CONFIG_64BIT
err |= __get_user(regs->hi, &sc->sc_hi[0]);
err |= __get_user(regs->lo, &sc->sc_lo[0]);
if (cpu_has_dsp) {
err |= __get_user(treg, &sc->sc_hi[1]); mthi1(treg);
err |= __get_user(treg, &sc->sc_lo[1]); mthi1(treg);
err |= __get_user(treg, &sc->sc_hi[2]); mthi2(treg);
err |= __get_user(treg, &sc->sc_lo[2]); mthi2(treg);
err |= __get_user(treg, &sc->sc_hi[3]); mthi3(treg);
err |= __get_user(treg, &sc->sc_lo[3]); mthi3(treg);
err |= __get_user(treg, &sc->sc_dsp); wrdsp(treg, DSP_MASK);
}
#endif
#define restore_gp_reg(i) do { \
err |= __get_user(regs->regs[i], &sc->sc_regs[i]); \
......
......@@ -280,27 +280,6 @@ asmlinkage int _sys_sysmips(int cmd, long arg1, int arg2, int arg3)
char __user *name;
switch(cmd) {
case SETNAME: {
char nodename[__NEW_UTS_LEN + 1];
if (!capable(CAP_SYS_ADMIN))
return -EPERM;
name = (char __user *) arg1;
len = strncpy_from_user(nodename, name, __NEW_UTS_LEN);
if (len < 0)
return -EFAULT;
down_write(&uts_sem);
strncpy(system_utsname.nodename, nodename, len);
nodename[__NEW_UTS_LEN] = '\0';
strlcpy(system_utsname.nodename, nodename,
sizeof(system_utsname.nodename));
up_write(&uts_sem);
return 0;
}
case MIPS_ATOMIC_SET:
printk(KERN_CRIT "How did I get here?\n");
return -EINVAL;
......@@ -313,9 +292,6 @@ asmlinkage int _sys_sysmips(int cmd, long arg1, int arg2, int arg3)
case FLUSH_CACHE:
__flush_cache_all();
return 0;
case MIPS_RDNVRAM:
return -EIO;
}
return -EINVAL;
......
......@@ -902,6 +902,7 @@ static inline void parity_protection_init(void)
{
switch (current_cpu_data.cputype) {
case CPU_24K:
case CPU_34K:
case CPU_5KC:
write_c0_ecc(0x80000000);
back_to_back_c0_hazard();
......
......@@ -151,23 +151,13 @@ SECTIONS
/* This is the MIPS specific mdebug section. */
.mdebug : { *(.mdebug) }
/* These are needed for ELF backends which have not yet been
converted to the new style linker. */
.stab 0 : { *(.stab) }
.stabstr 0 : { *(.stabstr) }
/* DWARF debug sections.
Symbols in the .debug DWARF section are relative to the beginning of the
section so we begin .debug at 0. It's not clear yet what needs to happen
for the others. */
.debug 0 : { *(.debug) }
.debug_srcinfo 0 : { *(.debug_srcinfo) }
.debug_aranges 0 : { *(.debug_aranges) }
.debug_pubnames 0 : { *(.debug_pubnames) }
.debug_sfnames 0 : { *(.debug_sfnames) }
.line 0 : { *(.line) }
STABS_DEBUG
DWARF_DEBUG
/* These must appear regardless of . */
.gptab.sdata : { *(.gptab.data) *(.gptab.sdata) }
.gptab.sbss : { *(.gptab.bss) *(.gptab.sbss) }
.comment : { *(.comment) }
.note : { *(.note) }
}
......@@ -29,6 +29,27 @@
#include <asm/war.h>
#include <asm/cacheflush.h> /* for run_uncached() */
/*
* Special Variant of smp_call_function for use by cache functions:
*
* o No return value
* o collapses to normal function call on UP kernels
* o collapses to normal function call on systems with a single shared
* primary cache.
*/
static inline void r4k_on_each_cpu(void (*func) (void *info), void *info,
int retry, int wait)
{
preempt_disable();
#if !defined(CONFIG_MIPS_MT_SMP) && !defined(CONFIG_MIPS_MT_SMTC)
smp_call_function(func, info, retry, wait);
#endif
func(info);
preempt_enable();
}
/*
* Must die.
*/
......@@ -299,7 +320,7 @@ static void r4k_flush_cache_all(void)
if (!cpu_has_dc_aliases)
return;
on_each_cpu(local_r4k_flush_cache_all, NULL, 1, 1);
r4k_on_each_cpu(local_r4k_flush_cache_all, NULL, 1, 1);
}
static inline void local_r4k___flush_cache_all(void * args)
......@@ -314,13 +335,14 @@ static inline void local_r4k___flush_cache_all(void * args)
case CPU_R4400MC:
case CPU_R10000:
case CPU_R12000:
case CPU_R14000:
r4k_blast_scache();
}
}
static void r4k___flush_cache_all(void)
{
on_each_cpu(local_r4k___flush_cache_all, NULL, 1, 1);
r4k_on_each_cpu(local_r4k___flush_cache_all, NULL, 1, 1);
}
static inline void local_r4k_flush_cache_range(void * args)
......@@ -341,7 +363,7 @@ static inline void local_r4k_flush_cache_range(void * args)
static void r4k_flush_cache_range(struct vm_area_struct *vma,
unsigned long start, unsigned long end)
{
on_each_cpu(local_r4k_flush_cache_range, vma, 1, 1);
r4k_on_each_cpu(local_r4k_flush_cache_range, vma, 1, 1);
}
static inline void local_r4k_flush_cache_mm(void * args)
......@@ -370,7 +392,7 @@ static void r4k_flush_cache_mm(struct mm_struct *mm)
if (!cpu_has_dc_aliases)
return;
on_each_cpu(local_r4k_flush_cache_mm, mm, 1, 1);
r4k_on_each_cpu(local_r4k_flush_cache_mm, mm, 1, 1);
}
struct flush_cache_page_args {
......@@ -461,7 +483,7 @@ static void r4k_flush_cache_page(struct vm_area_struct *vma,
args.addr = addr;
args.pfn = pfn;
on_each_cpu(local_r4k_flush_cache_page, &args, 1, 1);
r4k_on_each_cpu(local_r4k_flush_cache_page, &args, 1, 1);
}
static inline void local_r4k_flush_data_cache_page(void * addr)
......@@ -471,7 +493,7 @@ static inline void local_r4k_flush_data_cache_page(void * addr)
static void r4k_flush_data_cache_page(unsigned long addr)
{
on_each_cpu(local_r4k_flush_data_cache_page, (void *) addr, 1, 1);
r4k_on_each_cpu(local_r4k_flush_data_cache_page, (void *) addr, 1, 1);
}
struct flush_icache_range_args {
......@@ -514,7 +536,7 @@ static void r4k_flush_icache_range(unsigned long start, unsigned long end)
args.start = start;
args.end = end;
on_each_cpu(local_r4k_flush_icache_range, &args, 1, 1);
r4k_on_each_cpu(local_r4k_flush_icache_range, &args, 1, 1);
instruction_hazard();
}
......@@ -590,7 +612,7 @@ static void r4k_flush_icache_page(struct vm_area_struct *vma,
args.vma = vma;
args.page = page;
on_each_cpu(local_r4k_flush_icache_page, &args, 1, 1);
r4k_on_each_cpu(local_r4k_flush_icache_page, &args, 1, 1);
}
......@@ -689,7 +711,7 @@ static void local_r4k_flush_cache_sigtramp(void * arg)
static void r4k_flush_cache_sigtramp(unsigned long addr)
{
on_each_cpu(local_r4k_flush_cache_sigtramp, (void *) addr, 1, 1);
r4k_on_each_cpu(local_r4k_flush_cache_sigtramp, (void *) addr, 1, 1);
}
static void r4k_flush_icache_all(void)
......@@ -812,6 +834,7 @@ static void __init probe_pcache(void)
case CPU_R10000:
case CPU_R12000:
case CPU_R14000:
icache_size = 1 << (12 + ((config & R10K_CONF_IC) >> 29));
c->icache.linesz = 64;
c->icache.ways = 2;
......@@ -965,9 +988,11 @@ static void __init probe_pcache(void)
c->dcache.flags |= MIPS_CACHE_PINDEX;
case CPU_R10000:
case CPU_R12000:
case CPU_R14000:
case CPU_SB1:
break;
case CPU_24K:
case CPU_34K:
if (!(read_c0_config7() & (1 << 16)))
default:
if (c->dcache.waysize > PAGE_SIZE)
......@@ -1091,6 +1116,7 @@ static void __init setup_scache(void)
case CPU_R10000:
case CPU_R12000:
case CPU_R14000:
scache_size = 0x80000 << ((config & R10K_CONF_SS) >> 16);
c->scache.linesz = 64 << ((config >> 13) & 1);
c->scache.ways = 2;
......
......@@ -357,6 +357,7 @@ void __init build_clear_page(void)
case CPU_R10000:
case CPU_R12000:
case CPU_R14000:
pref_src_mode = Pref_LoadStreamed;
pref_dst_mode = Pref_StoreStreamed;
break;
......
......@@ -875,6 +875,7 @@ static __init void build_tlb_write_entry(u32 **p, struct label **l,
case CPU_R10000:
case CPU_R12000:
case CPU_R14000:
case CPU_4KC:
case CPU_SB1:
case CPU_SB1A:
......@@ -906,6 +907,7 @@ static __init void build_tlb_write_entry(u32 **p, struct label **l,
case CPU_4KEC:
case CPU_24K:
case CPU_34K:
case CPU_74K:
i_ehb(p);
tlbw(p);
break;
......
......@@ -80,6 +80,7 @@ int __init oprofile_arch_init(struct oprofile_operations *ops)
case CPU_24K:
case CPU_25KF:
case CPU_34K:
case CPU_74K:
case CPU_SB1:
case CPU_SB1A:
lmodel = &op_model_mipsxx;
......
......@@ -205,6 +205,10 @@ static int __init mipsxx_init(void)
case CPU_34K:
op_model_mipsxx.cpu_type = "mips/34K";
break;
case CPU_74K:
op_model_mipsxx.cpu_type = "mips/74K";
break;
#endif
case CPU_5KC:
......
......@@ -51,6 +51,7 @@
#define PRID_IMP_R4300 0x0b00
#define PRID_IMP_VR41XX 0x0c00
#define PRID_IMP_R12000 0x0e00
#define PRID_IMP_R14000 0x0f00
#define PRID_IMP_R8000 0x1000
#define PRID_IMP_PR4450 0x1200
#define PRID_IMP_R4600 0x2000
......@@ -87,6 +88,7 @@
#define PRID_IMP_24K 0x9300
#define PRID_IMP_34K 0x9500
#define PRID_IMP_24KE 0x9600
#define PRID_IMP_74K 0x9700
/*
* These are the PRID's for when 23:16 == PRID_COMP_SIBYTE
......@@ -196,7 +198,9 @@
#define CPU_34K 60
#define CPU_PR4450 61
#define CPU_SB1A 62
#define CPU_LAST 62
#define CPU_74K 63
#define CPU_R14000 64
#define CPU_LAST 64
/*
* ISA Level encodings
......
......@@ -7,6 +7,7 @@
#include <linux/futex.h>
#include <asm/errno.h>
#include <asm/uaccess.h>
#include <asm/war.h>
#ifdef CONFIG_SMP
#define __FUTEX_SMP_SYNC " sync \n"
......@@ -16,30 +17,58 @@
#define __futex_atomic_op(insn, ret, oldval, uaddr, oparg) \
{ \
__asm__ __volatile__( \
" .set push \n" \
" .set noat \n" \
" .set mips3 \n" \
"1: ll %1, (%3) # __futex_atomic_op1 \n" \
" .set mips0 \n" \
" " insn " \n" \
" .set mips3 \n" \
"2: sc $1, (%3) \n" \
" beqzl $1, 1b \n" \
__FUTEX_SMP_SYNC \
"3: \n" \
" .set pop \n" \
" .set mips0 \n" \
" .section .fixup,\"ax\" \n" \
"4: li %0, %5 \n" \
" j 2b \n" \
" .previous \n" \
" .section __ex_table,\"a\" \n" \
" "__UA_ADDR "\t1b, 4b \n" \
" "__UA_ADDR "\t2b, 4b \n" \
" .previous \n" \
: "=r" (ret), "=r" (oldval) \
: "0" (0), "r" (uaddr), "Jr" (oparg), "i" (-EFAULT)); \
if (cpu_has_llsc && R10000_LLSC_WAR) { \
__asm__ __volatile__( \
" .set push \n" \
" .set noat \n" \
" .set mips3 \n" \
"1: ll %1, (%3) # __futex_atomic_op \n" \
" .set mips0 \n" \
" " insn " \n" \
" .set mips3 \n" \
"2: sc $1, (%3) \n" \
" beqzl $1, 1b \n" \
__FUTEX_SMP_SYNC \
"3: \n" \
" .set pop \n" \
" .set mips0 \n" \
" .section .fixup,\"ax\" \n" \
"4: li %0, %5 \n" \
" j 2b \n" \
" .previous \n" \
" .section __ex_table,\"a\" \n" \
" "__UA_ADDR "\t1b, 4b \n" \
" "__UA_ADDR "\t2b, 4b \n" \
" .previous \n" \
: "=r" (ret), "=r" (oldval) \
: "0" (0), "r" (uaddr), "Jr" (oparg), "i" (-EFAULT)); \
} else if (cpu_has_llsc) { \
__asm__ __volatile__( \
" .set push \n" \
" .set noat \n" \
" .set mips3 \n" \
"1: ll %1, (%3) # __futex_atomic_op \n" \
" .set mips0 \n" \
" " insn " \n" \
" .set mips3 \n" \
"2: sc $1, (%3) \n" \
" beqz $1, 1b \n" \
__FUTEX_SMP_SYNC \
"3: \n" \
" .set pop \n" \
" .set mips0 \n" \
" .section .fixup,\"ax\" \n" \
"4: li %0, %5 \n" \
" j 2b \n" \
" .previous \n" \
" .section __ex_table,\"a\" \n" \
" "__UA_ADDR "\t1b, 4b \n" \
" "__UA_ADDR "\t2b, 4b \n" \
" .previous \n" \
: "=r" (ret), "=r" (oldval) \
: "0" (0), "r" (uaddr), "Jr" (oparg), "i" (-EFAULT)); \
} else \
ret = -ENOSYS; \
}
static inline int
......@@ -102,7 +131,69 @@ futex_atomic_op_inuser (int encoded_op, int __user *uaddr)
static inline int
futex_atomic_cmpxchg_inatomic(int __user *uaddr, int oldval, int newval)
{
return -ENOSYS;
int retval;
if (!access_ok(VERIFY_WRITE, uaddr, sizeof(int)))
return -EFAULT;
if (cpu_has_llsc && R10000_LLSC_WAR) {
__asm__ __volatile__(
"# futex_atomic_cmpxchg_inatomic \n"
" .set push \n"
" .set noat \n"
" .set mips3 \n"
"1: ll %0, %2 \n"
" bne %0, %z3, 3f \n"
" .set mips0 \n"
" move $1, %z4 \n"
" .set mips3 \n"
"2: sc $1, %1 \n"
" beqzl $1, 1b \n"
__FUTEX_SMP_SYNC
"3: \n"
" .set pop \n"
" .section .fixup,\"ax\" \n"
"4: li %0, %5 \n"
" j 3b \n"
" .previous \n"
" .section __ex_table,\"a\" \n"
" "__UA_ADDR "\t1b, 4b \n"
" "__UA_ADDR "\t2b, 4b \n"
" .previous \n"
: "=&r" (retval), "=R" (*uaddr)
: "R" (*uaddr), "Jr" (oldval), "Jr" (newval), "i" (-EFAULT)
: "memory");
} else if (cpu_has_llsc) {
__asm__ __volatile__(
"# futex_atomic_cmpxchg_inatomic \n"
" .set push \n"
" .set noat \n"
" .set mips3 \n"
"1: ll %0, %2 \n"
" bne %0, %z3, 3f \n"
" .set mips0 \n"
" move $1, %z4 \n"
" .set mips3 \n"
"2: sc $1, %1 \n"
" beqz $1, 1b \n"
__FUTEX_SMP_SYNC
"3: \n"
" .set pop \n"
" .section .fixup,\"ax\" \n"
"4: li %0, %5 \n"
" j 3b \n"
" .previous \n"
" .section __ex_table,\"a\" \n"
" "__UA_ADDR "\t1b, 4b \n"
" "__UA_ADDR "\t2b, 4b \n"
" .previous \n"
: "=&r" (retval), "=R" (*uaddr)
: "R" (*uaddr), "Jr" (oldval), "Jr" (newval), "i" (-EFAULT)
: "memory");
} else
return -ENOSYS;
return retval;
}
#endif
......
......@@ -6,6 +6,7 @@
* for more details.
*
* Copyright (C) 1996, 2000 by Ralf Baechle
* Copyright (C) 2006 by Thiemo Seufer
*/
#ifndef _ASM_INST_H
#define _ASM_INST_H
......@@ -21,14 +22,14 @@ enum major_op {
cop0_op, cop1_op, cop2_op, cop1x_op,
beql_op, bnel_op, blezl_op, bgtzl_op,
daddi_op, daddiu_op, ldl_op, ldr_op,
major_1c_op, jalx_op, major_1e_op, major_1f_op,
spec2_op, jalx_op, mdmx_op, spec3_op,
lb_op, lh_op, lwl_op, lw_op,
lbu_op, lhu_op, lwr_op, lwu_op,
sb_op, sh_op, swl_op, sw_op,
sdl_op, sdr_op, swr_op, cache_op,
ll_op, lwc1_op, lwc2_op, pref_op,
lld_op, ldc1_op, ldc2_op, ld_op,
sc_op, swc1_op, swc2_op, rdhwr_op,
sc_op, swc1_op, swc2_op, major_3b_op,
scd_op, sdc1_op, sdc2_op, sd_op
};
......@@ -37,7 +38,7 @@ enum major_op {
*/
enum spec_op {
sll_op, movc_op, srl_op, sra_op,
sllv_op, srlv_op, srav_op, spec1_unused_op, /* Opcode 0x07 is unused */
sllv_op, pmon_op, srlv_op, srav_op,
jr_op, jalr_op, movz_op, movn_op,
syscall_op, break_op, spim_op, sync_op,
mfhi_op, mthi_op, mflo_op, mtlo_op,
......@@ -54,6 +55,28 @@ enum spec_op {
dsll32_op, spec8_unused_op, dsrl32_op, dsra32_op
};
/*
* func field of spec2 opcode.
*/
enum spec2_op {
madd_op, maddu_op, mul_op, spec2_3_unused_op,
msub_op, msubu_op, /* more unused ops */
clz_op = 0x20, clo_op,
dclz_op = 0x24, dclo_op,
sdbpp_op = 0x3f
};
/*
* func field of spec3 opcode.
*/
enum spec3_op {
ext_op, dextm_op, dextu_op, dext_op,
ins_op, dinsm_op, dinsu_op, dins_op,
bshfl_op = 0x20,
dbshfl_op = 0x24,
rdhwr_op = 0x3f
};
/*
* rt field of bcond opcodes.
*/
......@@ -151,8 +174,8 @@ enum cop1x_func {
* func field for mad opcodes (MIPS IV).
*/
enum mad_func {
madd_op = 0x08, msub_op = 0x0a,
nmadd_op = 0x0c, nmsub_op = 0x0e
madd_fp_op = 0x08, msub_fp_op = 0x0a,
nmadd_fp_op = 0x0c, nmsub_fp_op = 0x0e
};
/*
......
......@@ -291,7 +291,7 @@
#define ST0_DL (_ULCAST_(1) << 24)
/*
* Enable the MIPS DSP ASE
* Enable the MIPS MDMX and DSP ASEs
*/
#define ST0_MX 0x01000000
......
......@@ -82,10 +82,11 @@ extern void paging_init(void);
#define pmd_page(pmd) (pfn_to_page(pmd_phys(pmd) >> PAGE_SHIFT))
#define pmd_page_kernel(pmd) pmd_val(pmd)
#define pte_none(pte) (!(pte_val(pte) & ~_PAGE_GLOBAL))
#define pte_present(pte) (pte_val(pte) & _PAGE_PRESENT)
#if defined(CONFIG_64BIT_PHYS_ADDR) && defined(CONFIG_CPU_MIPS32_R1)
#define pte_none(pte) (!(((pte).pte_low | (pte).pte_high) & ~_PAGE_GLOBAL))
#define pte_present(pte) ((pte).pte_low & _PAGE_PRESENT)
static inline void set_pte(pte_t *ptep, pte_t pte)
{
ptep->pte_high = pte.pte_high;
......@@ -93,27 +94,35 @@ static inline void set_pte(pte_t *ptep, pte_t pte)
ptep->pte_low = pte.pte_low;
//printk("pte_high %x pte_low %x\n", ptep->pte_high, ptep->pte_low);
if (pte_val(pte) & _PAGE_GLOBAL) {
if (pte.pte_low & _PAGE_GLOBAL) {
pte_t *buddy = ptep_buddy(ptep);
/*
* Make sure the buddy is global too (if it's !none,
* it better already be global)
*/
if (pte_none(*buddy))
buddy->pte_low |= _PAGE_GLOBAL;
if (pte_none(*buddy)) {
buddy->pte_low |= _PAGE_GLOBAL;
buddy->pte_high |= _PAGE_GLOBAL;
}
}
}
#define set_pte_at(mm,addr,ptep,pteval) set_pte(ptep,pteval)
static inline void pte_clear(struct mm_struct *mm, unsigned long addr, pte_t *ptep)
{
pte_t null = __pte(0);
/* Preserve global status for the pair */
if (pte_val(*ptep_buddy(ptep)) & _PAGE_GLOBAL)
set_pte_at(mm, addr, ptep, __pte(_PAGE_GLOBAL));
else
set_pte_at(mm, addr, ptep, __pte(0));
if (ptep_buddy(ptep)->pte_low & _PAGE_GLOBAL)
null.pte_low = null.pte_high = _PAGE_GLOBAL;
set_pte_at(mm, addr, ptep, null);
}
#else
#define pte_none(pte) (!(pte_val(pte) & ~_PAGE_GLOBAL))
#define pte_present(pte) (pte_val(pte) & _PAGE_PRESENT)
/*
* Certain architectures need to do special things when pte's
* within a page table are directly modified. Thus, the following
......@@ -174,75 +183,76 @@ extern pgd_t swapper_pg_dir[PTRS_PER_PGD];
*/
static inline int pte_user(pte_t pte) { BUG(); return 0; }
#if defined(CONFIG_64BIT_PHYS_ADDR) && defined(CONFIG_CPU_MIPS32_R1)
static inline int pte_read(pte_t pte) { return (pte).pte_low & _PAGE_READ; }
static inline int pte_write(pte_t pte) { return (pte).pte_low & _PAGE_WRITE; }
static inline int pte_dirty(pte_t pte) { return (pte).pte_low & _PAGE_MODIFIED; }
static inline int pte_young(pte_t pte) { return (pte).pte_low & _PAGE_ACCESSED; }
static inline int pte_file(pte_t pte) { return (pte).pte_low & _PAGE_FILE; }
static inline int pte_read(pte_t pte) { return pte.pte_low & _PAGE_READ; }
static inline int pte_write(pte_t pte) { return pte.pte_low & _PAGE_WRITE; }
static inline int pte_dirty(pte_t pte) { return pte.pte_low & _PAGE_MODIFIED; }
static inline int pte_young(pte_t pte) { return pte.pte_low & _PAGE_ACCESSED; }
static inline int pte_file(pte_t pte) { return pte.pte_low & _PAGE_FILE; }
static inline pte_t pte_wrprotect(pte_t pte)
{
(pte).pte_low &= ~(_PAGE_WRITE | _PAGE_SILENT_WRITE);
(pte).pte_high &= ~_PAGE_SILENT_WRITE;
pte.pte_low &= ~(_PAGE_WRITE | _PAGE_SILENT_WRITE);
pte.pte_high &= ~_PAGE_SILENT_WRITE;
return pte;
}
static inline pte_t pte_rdprotect(pte_t pte)
{
(pte).pte_low &= ~(_PAGE_READ | _PAGE_SILENT_READ);
(pte).pte_high &= ~_PAGE_SILENT_READ;
pte.pte_low &= ~(_PAGE_READ | _PAGE_SILENT_READ);
pte.pte_high &= ~_PAGE_SILENT_READ;
return pte;
}
static inline pte_t pte_mkclean(pte_t pte)
{
(pte).pte_low &= ~(_PAGE_MODIFIED|_PAGE_SILENT_WRITE);
(pte).pte_high &= ~_PAGE_SILENT_WRITE;
pte.pte_low &= ~(_PAGE_MODIFIED | _PAGE_SILENT_WRITE);
pte.pte_high &= ~_PAGE_SILENT_WRITE;
return pte;
}
static inline pte_t pte_mkold(pte_t pte)
{
(pte).pte_low &= ~(_PAGE_ACCESSED|_PAGE_SILENT_READ);
(pte).pte_high &= ~_PAGE_SILENT_READ;
pte.pte_low &= ~(_PAGE_ACCESSED | _PAGE_SILENT_READ);
pte.pte_high &= ~_PAGE_SILENT_READ;
return pte;
}
static inline pte_t pte_mkwrite(pte_t pte)
{
(pte).pte_low |= _PAGE_WRITE;
if ((pte).pte_low & _PAGE_MODIFIED) {
(pte).pte_low |= _PAGE_SILENT_WRITE;
(pte).pte_high |= _PAGE_SILENT_WRITE;
pte.pte_low |= _PAGE_WRITE;
if (pte.pte_low & _PAGE_MODIFIED) {
pte.pte_low |= _PAGE_SILENT_WRITE;
pte.pte_high |= _PAGE_SILENT_WRITE;
}
return pte;
}
static inline pte_t pte_mkread(pte_t pte)
{
(pte).pte_low |= _PAGE_READ;
if ((pte).pte_low & _PAGE_ACCESSED) {
(pte).pte_low |= _PAGE_SILENT_READ;
(pte).pte_high |= _PAGE_SILENT_READ;
pte.pte_low |= _PAGE_READ;
if (pte.pte_low & _PAGE_ACCESSED) {
pte.pte_low |= _PAGE_SILENT_READ;
pte.pte_high |= _PAGE_SILENT_READ;
}
return pte;
}
static inline pte_t pte_mkdirty(pte_t pte)
{
(pte).pte_low |= _PAGE_MODIFIED;
if ((pte).pte_low & _PAGE_WRITE) {
(pte).pte_low |= _PAGE_SILENT_WRITE;
(pte).pte_high |= _PAGE_SILENT_WRITE;
pte.pte_low |= _PAGE_MODIFIED;
if (pte.pte_low & _PAGE_WRITE) {
pte.pte_low |= _PAGE_SILENT_WRITE;
pte.pte_high |= _PAGE_SILENT_WRITE;
}
return pte;
}
static inline pte_t pte_mkyoung(pte_t pte)
{
(pte).pte_low |= _PAGE_ACCESSED;
if ((pte).pte_low & _PAGE_READ)
(pte).pte_low |= _PAGE_SILENT_READ;
(pte).pte_high |= _PAGE_SILENT_READ;
pte.pte_low |= _PAGE_ACCESSED;
if (pte.pte_low & _PAGE_READ)
pte.pte_low |= _PAGE_SILENT_READ;
pte.pte_high |= _PAGE_SILENT_READ;
return pte;
}
#else
......
......@@ -55,8 +55,14 @@ struct sigcontext {
struct sigcontext {
unsigned long sc_regs[32];
unsigned long sc_fpregs[32];
unsigned long sc_hi[4];
unsigned long sc_lo[4];
unsigned long sc_mdhi;
unsigned long sc_hi1;
unsigned long sc_hi2;
unsigned long sc_hi3;
unsigned long sc_mdlo;
unsigned long sc_lo1;
unsigned long sc_lo2;
unsigned long sc_lo3;
unsigned long sc_pc;
unsigned int sc_fpc_csr;
unsigned int sc_used_math;
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册