b43: LCN-PHY: implement disabling radio

wl reads radio version, then disables it. That's how we found it in MMIO
dump:
 radio_read(0x0000) -> 0x0031 <-- RADIO READ WITHOUT 0x200 SET!
 radio_read(0x0001) -> 0x0064 <-- RADIO READ WITHOUT 0x200 SET!
 radio_read(0x0002) -> 0x0020 <-- RADIO READ WITHOUT 0x200 SET!
 read32 0xfaafc120 -> 0x04000400
 phy_read(0x044d) -> 0x0000
phy_write(0x044d) <- 0x0000
 phy_read(0x044c) -> 0x1fff
phy_write(0x044c) <- 0x1fff
 phy_read(0x04b7) -> 0x0000
phy_write(0x04b7) <- 0x0000
 phy_read(0x04b1) -> 0x0000
phy_write(0x04b1) <- 0x0000
 phy_read(0x04b0) -> 0x7dff
phy_write(0x04b0) <- 0x7dff
 phy_read(0x04fa) -> 0x0000
phy_write(0x04fa) <- 0x0000
 phy_read(0x04f9) -> 0x007f
phy_write(0x04f9) <- 0x007f
Signed-off-by: NRafał Miłecki <zajec5@gmail.com>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

drivers/net/wireless/b43/phy_lcn.c

@@ -60,6 +60,27 @@ static void b43_phy_lcn_op_prepare_structs(struct b43_wldev *dev)
 	memset(phy_lcn, 0, sizeof(*phy_lcn));
 }
 
+static void b43_phy_lcn_op_software_rfkill(struct b43_wldev *dev,
+					bool blocked)
+{
+	if (b43_read32(dev, B43_MMIO_MACCTL) & B43_MACCTL_ENABLED)
+		b43err(dev->wl, "MAC not suspended\n");
+
+	if (blocked) {
+		b43_phy_mask(dev, B43_PHY_LCN_RF_CTL2, ~0x7c00);
+		b43_phy_set(dev, B43_PHY_LCN_RF_CTL1, 0x1f00);
+
+		b43_phy_mask(dev, B43_PHY_LCN_RF_CTL5, ~0x7f00);
+		b43_phy_mask(dev, B43_PHY_LCN_RF_CTL4, ~0x2);
+		b43_phy_set(dev, B43_PHY_LCN_RF_CTL3, 0x808);
+
+		b43_phy_mask(dev, B43_PHY_LCN_RF_CTL7, ~0x8);
+		b43_phy_set(dev, B43_PHY_LCN_RF_CTL6, 0x8);
+	} else {
+		/* TODO */
+	}
+}
+
 static unsigned int b43_phy_lcn_op_get_default_chan(struct b43_wldev *dev)
 {
 	if (b43_current_band(dev->wl) == IEEE80211_BAND_2GHZ)
@@ -92,7 +113,9 @@ const struct b43_phy_operations b43_phyops_lcn = {
 	.phy_maskset		= b43_phy_lcn_op_maskset,
 	.radio_read		= b43_phy_lcn_op_radio_read,
 	.radio_write		= b43_phy_lcn_op_radio_write,
+	*/
 	.software_rfkill	= b43_phy_lcn_op_software_rfkill,
+	/*
 	.switch_analog		= b43_phy_lcn_op_switch_analog,
 	.switch_channel		= b43_phy_lcn_op_switch_channel,
 	*/

drivers/net/wireless/b43/phy_lcn.h

@@ -4,6 +4,15 @@
 #include "phy_common.h"
 
 
+#define B43_PHY_LCN_RF_CTL1			B43_PHY_OFDM(0x04C)
+#define B43_PHY_LCN_RF_CTL2			B43_PHY_OFDM(0x04D)
+#define B43_PHY_LCN_RF_CTL3			B43_PHY_OFDM(0x0B0)
+#define B43_PHY_LCN_RF_CTL4			B43_PHY_OFDM(0x0B1)
+#define B43_PHY_LCN_RF_CTL5			B43_PHY_OFDM(0x0B7)
+#define B43_PHY_LCN_RF_CTL6			B43_PHY_OFDM(0x0F9)
+#define B43_PHY_LCN_RF_CTL7			B43_PHY_OFDM(0x0FA)
+
+
 struct b43_phy_lcn {
 };