提交 b9baa20b 编写于 作者: B Benjamin Herrenschmidt 提交者: Paul Mackerras

[POWERPC] pci32: Remove PowerMac P2P bridge IO hack

The 32 bits PowerPC PCI code has a hack for use by some PowerMacs
to try to re-open PCI<->PCI bridge IO resources that were closed
by the firmware.  This is no longer necessary as the generic code
will now do that for us.
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: NPaul Mackerras <paulus@samba.org>
上级 0ec6b5c1
......@@ -711,217 +711,6 @@ void pcibios_make_OF_bus_map(void)
}
#endif /* CONFIG_PPC_OF */
#ifdef CONFIG_PPC_PMAC
/*
* This set of routines checks for PCI<->PCI bridges that have closed
* IO resources and have child devices. It tries to re-open an IO
* window on them.
*
* This is a _temporary_ fix to workaround a problem with Apple's OF
* closing IO windows on P2P bridges when the OF drivers of cards
* below this bridge don't claim any IO range (typically ATI or
* Adaptec).
*
* A more complete fix would be to use drivers/pci/setup-bus.c, which
* involves a working pcibios_fixup_pbus_ranges(), some more care about
* ordering when creating the host bus resources, and maybe a few more
* minor tweaks
*/
/* Initialize bridges with base/limit values we have collected */
static void __init
do_update_p2p_io_resource(struct pci_bus *bus, int enable_vga)
{
struct pci_dev *bridge = bus->self;
struct pci_controller* hose = (struct pci_controller *)bridge->sysdata;
u32 l;
u16 w;
struct resource res;
if (bus->resource[0] == NULL)
return;
res = *(bus->resource[0]);
DBG("Remapping Bus %d, bridge: %s\n", bus->number, pci_name(bridge));
res.start -= ((unsigned long) hose->io_base_virt - isa_io_base);
res.end -= ((unsigned long) hose->io_base_virt - isa_io_base);
DBG(" IO window: %016llx-%016llx\n", res.start, res.end);
/* Set up the top and bottom of the PCI I/O segment for this bus. */
pci_read_config_dword(bridge, PCI_IO_BASE, &l);
l &= 0xffff000f;
l |= (res.start >> 8) & 0x00f0;
l |= res.end & 0xf000;
pci_write_config_dword(bridge, PCI_IO_BASE, l);
if ((l & PCI_IO_RANGE_TYPE_MASK) == PCI_IO_RANGE_TYPE_32) {
l = (res.start >> 16) | (res.end & 0xffff0000);
pci_write_config_dword(bridge, PCI_IO_BASE_UPPER16, l);
}
pci_read_config_word(bridge, PCI_COMMAND, &w);
w |= PCI_COMMAND_IO;
pci_write_config_word(bridge, PCI_COMMAND, w);
#if 0 /* Enabling this causes XFree 4.2.0 to hang during PCI probe */
if (enable_vga) {
pci_read_config_word(bridge, PCI_BRIDGE_CONTROL, &w);
w |= PCI_BRIDGE_CTL_VGA;
pci_write_config_word(bridge, PCI_BRIDGE_CONTROL, w);
}
#endif
}
/* This function is pretty basic and actually quite broken for the
* general case, it's enough for us right now though. It's supposed
* to tell us if we need to open an IO range at all or not and what
* size.
*/
static int __init
check_for_io_childs(struct pci_bus *bus, struct resource* res, int *found_vga)
{
struct pci_dev *dev;
int i;
int rc = 0;
#define push_end(res, mask) do { \
BUG_ON((mask+1) & mask); \
res->end = (res->end + mask) | mask; \
} while (0)
list_for_each_entry(dev, &bus->devices, bus_list) {
u16 class = dev->class >> 8;
if (class == PCI_CLASS_DISPLAY_VGA ||
class == PCI_CLASS_NOT_DEFINED_VGA)
*found_vga = 1;
if (class >> 8 == PCI_BASE_CLASS_BRIDGE && dev->subordinate)
rc |= check_for_io_childs(dev->subordinate, res, found_vga);
if (class == PCI_CLASS_BRIDGE_CARDBUS)
push_end(res, 0xfff);
for (i=0; i<PCI_NUM_RESOURCES; i++) {
struct resource *r;
unsigned long r_size;
if (dev->class >> 8 == PCI_CLASS_BRIDGE_PCI
&& i >= PCI_BRIDGE_RESOURCES)
continue;
r = &dev->resource[i];
r_size = r->end - r->start;
if (r_size < 0xfff)
r_size = 0xfff;
if (r->flags & IORESOURCE_IO && (r_size) != 0) {
rc = 1;
push_end(res, r_size);
}
}
}
return rc;
}
/* Here we scan all P2P bridges of a given level that have a closed
* IO window. Note that the test for the presence of a VGA card should
* be improved to take into account already configured P2P bridges,
* currently, we don't see them and might end up configuring 2 bridges
* with VGA pass through enabled
*/
static void __init
do_fixup_p2p_level(struct pci_bus *bus)
{
struct pci_bus *b;
int i, parent_io;
int has_vga = 0;
for (parent_io=0; parent_io<4; parent_io++)
if (bus->resource[parent_io]
&& bus->resource[parent_io]->flags & IORESOURCE_IO)
break;
if (parent_io >= 4)
return;
list_for_each_entry(b, &bus->children, node) {
struct pci_dev *d = b->self;
struct pci_controller* hose = (struct pci_controller *)d->sysdata;
struct resource *res = b->resource[0];
struct resource tmp_res;
unsigned long max;
int found_vga = 0;
memset(&tmp_res, 0, sizeof(tmp_res));
tmp_res.start = bus->resource[parent_io]->start;
/* We don't let low addresses go through that closed P2P bridge, well,
* that may not be necessary but I feel safer that way
*/
if (tmp_res.start == 0)
tmp_res.start = 0x1000;
if (!list_empty(&b->devices) && res && res->flags == 0 &&
res != bus->resource[parent_io] &&
(d->class >> 8) == PCI_CLASS_BRIDGE_PCI &&
check_for_io_childs(b, &tmp_res, &found_vga)) {
u8 io_base_lo;
printk(KERN_INFO "Fixing up IO bus %s\n", b->name);
if (found_vga) {
if (has_vga) {
printk(KERN_WARNING "Skipping VGA, already active"
" on bus segment\n");
found_vga = 0;
} else
has_vga = 1;
}
pci_read_config_byte(d, PCI_IO_BASE, &io_base_lo);
if ((io_base_lo & PCI_IO_RANGE_TYPE_MASK) == PCI_IO_RANGE_TYPE_32)
max = ((unsigned long) hose->io_base_virt
- isa_io_base) + 0xffffffff;
else
max = ((unsigned long) hose->io_base_virt
- isa_io_base) + 0xffff;
*res = tmp_res;
res->flags = IORESOURCE_IO;
res->name = b->name;
/* Find a resource in the parent where we can allocate */
for (i = 0 ; i < 4; i++) {
struct resource *r = bus->resource[i];
if (!r)
continue;
if ((r->flags & IORESOURCE_IO) == 0)
continue;
DBG("Trying to allocate from %016llx, size %016llx from parent"
" res %d: %016llx -> %016llx\n",
res->start, res->end, i, r->start, r->end);
if (allocate_resource(r, res, res->end + 1, res->start, max,
res->end + 1, NULL, NULL) < 0) {
DBG("Failed !\n");
continue;
}
do_update_p2p_io_resource(b, found_vga);
break;
}
}
do_fixup_p2p_level(b);
}
}
static void
pcibios_fixup_p2p_bridges(void)
{
struct pci_bus *b;
list_for_each_entry(b, &pci_root_buses, node)
do_fixup_p2p_level(b);
}
#endif /* CONFIG_PPC_PMAC */
static int __init
pcibios_init(void)
{
......@@ -961,9 +750,7 @@ pcibios_init(void)
pcibios_allocate_bus_resources(&pci_root_buses);
pcibios_allocate_resources(0);
pcibios_allocate_resources(1);
#ifdef CONFIG_PPC_PMAC
pcibios_fixup_p2p_bridges();
#endif /* CONFIG_PPC_PMAC */
DBG("PCI: Assigning unassigned resouces...\n");
pci_assign_unassigned_resources();
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册