sh: mach-migor: Delete soc_camera_platform setup.

Migo-R can use ov772x camera driver in Linux 2.6.29.
Therefore, soc_camera_platform setting is no longer needed.
This patch removes it.
Signed-off-by: NKuninori Morimoto <morimoto.kuninori@renesas.com>
Signed-off-by: NPaul Mundt <lethal@linux-sh.org>

arch/sh/boards/mach-migor/setup.c

@@ -18,7 +18,6 @@
 #include <linux/delay.h>
 #include <linux/clk.h>
 #include <linux/gpio.h>
-#include <media/soc_camera_platform.h>
 #include <media/sh_mobile_ceu.h>
 #include <media/ov772x.h>
 #include <video/sh_mobile_lcdc.h>
@@ -319,14 +318,6 @@ static void camera_power_off(void)
 	gpio_set_value(GPIO_PTT3, 0);
 }
 
-static void camera_power(int mode)
-{
-	if (mode)
-		camera_power_on();
-	else
-		camera_power_off();
-}
-
 static int ov7725_power(struct device *dev, int mode)
 {
 	if (mode)
@@ -337,97 +328,6 @@ static int ov7725_power(struct device *dev, int mode)
 	return 0;
 }
 
-#ifdef CONFIG_I2C
-static unsigned char camera_ov772x_magic[] =
-{
-	0x09, 0x01, 0x0c, 0x20, 0x0d, 0x41, 0x0e, 0x01,
-	0x12, 0x00, 0x13, 0x8F, 0x14, 0x4A, 0x15, 0x00,
-	0x16, 0x00, 0x17, 0x23, 0x18, 0xa0, 0x19, 0x07,
-	0x1a, 0xf0, 0x1b, 0x40, 0x1f, 0x00, 0x20, 0x10,
-	0x22, 0xff, 0x23, 0x01, 0x28, 0x00, 0x29, 0xa0,
-	0x2a, 0x00, 0x2b, 0x00, 0x2c, 0xf0, 0x2d, 0x00,
-	0x2e, 0x00, 0x30, 0x80, 0x31, 0x60, 0x32, 0x00,
-	0x33, 0x00, 0x34, 0x00, 0x3d, 0x80, 0x3e, 0xe2,
-	0x3f, 0x1f, 0x42, 0x80, 0x43, 0x80, 0x44, 0x80,
-	0x45, 0x80, 0x46, 0x00, 0x47, 0x00, 0x48, 0x00,
-	0x49, 0x50, 0x4a, 0x30, 0x4b, 0x50, 0x4c, 0x50,
-	0x4d, 0x00, 0x4e, 0xef, 0x4f, 0x10, 0x50, 0x60,
-	0x51, 0x00, 0x52, 0x00, 0x53, 0x24, 0x54, 0x7a,
-	0x55, 0xfc, 0x62, 0xff, 0x63, 0xf0, 0x64, 0x1f,
-	0x65, 0x00, 0x66, 0x10, 0x67, 0x00, 0x68, 0x00,
-	0x69, 0x5c, 0x6a, 0x11, 0x6b, 0xa2, 0x6c, 0x01,
-	0x6d, 0x50, 0x6e, 0x80, 0x6f, 0x80, 0x70, 0x0f,
-	0x71, 0x00, 0x72, 0x00, 0x73, 0x0f, 0x74, 0x0f,
-	0x75, 0xff, 0x78, 0x10, 0x79, 0x70, 0x7a, 0x70,
-	0x7b, 0xf0, 0x7c, 0xf0, 0x7d, 0xf0, 0x7e, 0x0e,
-	0x7f, 0x1a, 0x80, 0x31, 0x81, 0x5a, 0x82, 0x69,
-	0x83, 0x75, 0x84, 0x7e, 0x85, 0x88, 0x86, 0x8f,
-	0x87, 0x96, 0x88, 0xa3, 0x89, 0xaf, 0x8a, 0xc4,
-	0x8b, 0xd7, 0x8c, 0xe8, 0x8d, 0x20, 0x8e, 0x00,
-	0x8f, 0x00, 0x90, 0x08, 0x91, 0x10, 0x92, 0x1f,
-	0x93, 0x01, 0x94, 0x2c, 0x95, 0x24, 0x96, 0x08,
-	0x97, 0x14, 0x98, 0x24, 0x99, 0x38, 0x9a, 0x9e,
-	0x9b, 0x00, 0x9c, 0x40, 0x9e, 0x11, 0x9f, 0x02,
-	0xa0, 0x00, 0xa1, 0x40, 0xa2, 0x40, 0xa3, 0x06,
-	0xa4, 0x00, 0xa6, 0x00, 0xa7, 0x40, 0xa8, 0x40,
-	0xa9, 0x80, 0xaa, 0x80, 0xab, 0x06, 0xac, 0xff,
-	0x12, 0x06, 0x64, 0x3f, 0x12, 0x46, 0x17, 0x3f,
-	0x18, 0x50, 0x19, 0x03, 0x1a, 0x78, 0x29, 0x50,
-	0x2c, 0x78,
-};
-
-static int ov772x_set_capture(struct soc_camera_platform_info *info,
-			      int enable)
-{
-	struct i2c_adapter *a = i2c_get_adapter(0);
-	struct i2c_msg msg;
-	int ret = 0;
-	int i;
-
-	if (!enable)
-		return 0; /* camera_power_off() is enough */
-
-	for (i = 0; i < ARRAY_SIZE(camera_ov772x_magic); i += 2) {
-		u_int8_t buf[8];
-
-		msg.addr = 0x21;
-		msg.buf = buf;
-		msg.len = 2;
-		msg.flags = 0;
-
-		buf[0] = camera_ov772x_magic[i];
-		buf[1] = camera_ov772x_magic[i + 1];
-
-		ret = (ret < 0) ? ret : i2c_transfer(a, &msg, 1);
-	}
-
-	return ret;
-}
-
-static struct soc_camera_platform_info ov772x_info = {
-	.iface = 0,
-	.format_name = "RGB565",
-	.format_depth = 16,
-	.format = {
-		.pixelformat = V4L2_PIX_FMT_RGB565,
-		.colorspace = V4L2_COLORSPACE_SRGB,
-		.width = 320,
-		.height = 240,
-	},
-	.bus_param =  SOCAM_PCLK_SAMPLE_RISING | SOCAM_HSYNC_ACTIVE_HIGH |
-	SOCAM_VSYNC_ACTIVE_HIGH | SOCAM_MASTER | SOCAM_DATAWIDTH_8,
-	.power = camera_power,
-	.set_capture = ov772x_set_capture,
-};
-
-static struct platform_device migor_camera_device = {
-	.name		= "soc_camera_platform",
-	.dev	= {
-		.platform_data	= &ov772x_info,
-	},
-};
-#endif /* CONFIG_I2C */
-
 static struct sh_mobile_ceu_info sh_mobile_ceu_info = {
 	.flags = SOCAM_MASTER | SOCAM_DATAWIDTH_8 | SOCAM_PCLK_SAMPLE_RISING \
 	| SOCAM_HSYNC_ACTIVE_HIGH | SOCAM_VSYNC_ACTIVE_HIGH,
@@ -471,9 +371,6 @@ static struct platform_device *migor_devices[] __initdata = {
 	&sh_keysc_device,
 	&migor_lcdc_device,
 	&migor_ceu_device,
-#ifdef CONFIG_I2C
-	&migor_camera_device,
-#endif
 	&migor_nor_flash_device,
 	&migor_nand_flash_device,
 };