Merge branch 'linus' into cpus4096

Documentation/usb/gadget_serial.txt

@@ -114,11 +114,11 @@ modules.
 Then you must load the gadget serial driver.  To load it as an
 ACM device (recommended for interoperability), do this:
 
-  modprobe g_serial use_acm=1
+  modprobe g_serial
 
 To load it as a vendor specific bulk in/out device, do this:
 
-  modprobe g_serial
+  modprobe g_serial use_acm=0
 
 This will also automatically load the underlying gadget peripheral
 controller driver.  This must be done each time you reboot the gadget

Documentation/usb/proc_usb_info.txt

@@ -49,8 +49,10 @@ it and 002/048 sometime later.
 
 These files can be read as binary data.  The binary data consists
 of first the device descriptor, then the descriptors for each
-configuration of the device.  That information is also shown in
-text form by the /proc/bus/usb/devices file, described later.
+configuration of the device.  Multi-byte fields in the device and
+configuration descriptors, but not other descriptors, are converted
+to host endianness by the kernel.  This information is also shown
+in text form by the /proc/bus/usb/devices file, described later.
 
 These files may also be used to write user-level drivers for the USB
 devices.  You would open the /proc/bus/usb/BBB/DDD file read/write,

Documentation/usb/usbmon.txt

@@ -34,11 +34,12 @@ if usbmon is built into the kernel.
 Verify that bus sockets are present.
 
 # ls /sys/kernel/debug/usbmon
-0s  0t  0u  1s  1t  1u  2s  2t  2u  3s  3t  3u  4s  4t  4u
+0s  0u  1s  1t  1u  2s  2t  2u  3s  3t  3u  4s  4t  4u
 #
 
-Now you can choose to either use the sockets numbered '0' (to capture packets on
-all buses), and skip to step #3, or find the bus used by your device with step #2.
+Now you can choose to either use the socket '0u' (to capture packets on all
+buses), and skip to step #3, or find the bus used by your device with step #2.
+This allows to filter away annoying devices that talk continuously.
 
 2. Find which bus connects to the desired device
 
@@ -99,8 +100,9 @@ on the event type, but there is a set of words, common for all types.
 
 Here is the list of words, from left to right:
 
-- URB Tag. This is used to identify URBs is normally a kernel mode address
- of the URB structure in hexadecimal.
+- URB Tag. This is used to identify URBs, and is normally an in-kernel address
+  of the URB structure in hexadecimal, but can be a sequence number or any
+  other unique string, within reason.
 
 - Timestamp in microseconds, a decimal number. The timestamp's resolution
   depends on available clock, and so it can be much worse than a microsecond

arch/powerpc/kernel/misc_32.S

@@ -486,13 +486,13 @@ _GLOBAL(_tlbil_va)
 	tlbsx	0,r3
 	mfspr	r4,SPRN_MAS1		/* check valid */
 	andis.	r3,r4,MAS1_VALID@h
-	beqlr
+	beq	1f
 	rlwinm	r4,r4,0,1,31
 	mtspr	SPRN_MAS1,r4
 	tlbwe
 	msync
 	isync
-	wrtee	r10
+1:	wrtee	r10
 	blr
 #endif /* CONFIG_FSL_BOOKE */
 

arch/powerpc/lib/rheap.c

@@ -556,6 +556,7 @@ unsigned long rh_alloc_fixed(rh_info_t * info, unsigned long start, int size, co
 		be = blk->start + blk->size;
 		if (s >= bs && e <= be)
 			break;
+		blk = NULL;
 	}
 
 	if (blk == NULL)

drivers/char/xilinx_hwicap/buffer_icap.c

@@ -21,9 +21,6 @@
  *     INFRINGEMENT, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
  *     FOR A PARTICULAR PURPOSE.
  *
- *     Xilinx products are not intended for use in life support appliances,
- *     devices, or systems. Use in such applications is expressly prohibited.
- *
  *     (c) Copyright 2003-2008 Xilinx Inc.
  *     All rights reserved.
  *

drivers/char/xilinx_hwicap/buffer_icap.h

@@ -21,9 +21,6 @@
  *     INFRINGEMENT, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
  *     FOR A PARTICULAR PURPOSE.
  *
- *     Xilinx products are not intended for use in life support appliances,
- *     devices, or systems. Use in such applications is expressly prohibited.
- *
  *     (c) Copyright 2003-2008 Xilinx Inc.
  *     All rights reserved.
  *

drivers/char/xilinx_hwicap/fifo_icap.c

@@ -21,9 +21,6 @@
  *     INFRINGEMENT, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
  *     FOR A PARTICULAR PURPOSE.
  *
- *     Xilinx products are not intended for use in life support appliances,
- *     devices, or systems. Use in such applications is expressly prohibited.
- *
  *     (c) Copyright 2007-2008 Xilinx Inc.
  *     All rights reserved.
  *

drivers/char/xilinx_hwicap/fifo_icap.h

@@ -21,9 +21,6 @@
  *     INFRINGEMENT, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
  *     FOR A PARTICULAR PURPOSE.
  *
- *     Xilinx products are not intended for use in life support appliances,
- *     devices, or systems. Use in such applications is expressly prohibited.
- *
  *     (c) Copyright 2007-2008 Xilinx Inc.
  *     All rights reserved.
  *

drivers/char/xilinx_hwicap/xilinx_hwicap.c

@@ -21,9 +21,6 @@
  *     INFRINGEMENT, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
  *     FOR A PARTICULAR PURPOSE.
  *
- *     Xilinx products are not intended for use in life support appliances,
- *     devices, or systems. Use in such applications is expressly prohibited.
- *
  *     (c) Copyright 2002 Xilinx Inc., Systems Engineering Group
  *     (c) Copyright 2004 Xilinx Inc., Systems Engineering Group
  *     (c) Copyright 2007-2008 Xilinx Inc.

drivers/char/xilinx_hwicap/xilinx_hwicap.h

@@ -21,9 +21,6 @@
  *     INFRINGEMENT, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
  *     FOR A PARTICULAR PURPOSE.
  *
- *     Xilinx products are not intended for use in life support appliances,
- *     devices, or systems. Use in such applications is expressly prohibited.
- *
  *     (c) Copyright 2003-2007 Xilinx Inc.
  *     All rights reserved.
  *

drivers/i2c/busses/i2c-cpm.c

@@ -365,6 +365,7 @@ static int cpm_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs, int num)
 		pmsg = &msgs[tptr];
 		if (pmsg->flags & I2C_M_RD)
 			ret = wait_event_interruptible_timeout(cpm->i2c_wait,
+				(in_be16(&tbdf[tptr].cbd_sc) & BD_SC_NAK) ||
 				!(in_be16(&rbdf[rptr].cbd_sc) & BD_SC_EMPTY),
 				1 * HZ);
 		else

drivers/i2c/busses/i2c-s3c2410.c

@@ -56,6 +56,7 @@ enum s3c24xx_i2c_state {
 struct s3c24xx_i2c {
 	spinlock_t		lock;
 	wait_queue_head_t	wait;
+	unsigned int		suspended:1;
 
 	struct i2c_msg		*msg;
 	unsigned int		msg_num;
@@ -507,7 +508,7 @@ static int s3c24xx_i2c_doxfer(struct s3c24xx_i2c *i2c, struct i2c_msg *msgs, int
 	unsigned long timeout;
 	int ret;
 
-	if (!(readl(i2c->regs + S3C2410_IICCON) & S3C2410_IICCON_IRQEN))
+	if (i2c->suspended)
 		return -EIO;
 
 	ret = s3c24xx_i2c_set_master(i2c);
@@ -986,17 +987,26 @@ static int s3c24xx_i2c_remove(struct platform_device *pdev)
 }
 
 #ifdef CONFIG_PM
+static int s3c24xx_i2c_suspend_late(struct platform_device *dev,
+				    pm_message_t msg)
+{
+	struct s3c24xx_i2c *i2c = platform_get_drvdata(dev);
+	i2c->suspended = 1;
+	return 0;
+}
+
 static int s3c24xx_i2c_resume(struct platform_device *dev)
 {
 	struct s3c24xx_i2c *i2c = platform_get_drvdata(dev);
 
-	if (i2c != NULL)
-		s3c24xx_i2c_init(i2c);
+	i2c->suspended = 0;
+	s3c24xx_i2c_init(i2c);
 
 	return 0;
 }
 
 #else
+#define s3c24xx_i2c_suspend_late NULL
 #define s3c24xx_i2c_resume NULL
 #endif
 
@@ -1005,6 +1015,7 @@ static int s3c24xx_i2c_resume(struct platform_device *dev)
 static struct platform_driver s3c2410_i2c_driver = {
 	.probe		= s3c24xx_i2c_probe,
 	.remove		= s3c24xx_i2c_remove,
+	.suspend_late	= s3c24xx_i2c_suspend_late,
 	.resume		= s3c24xx_i2c_resume,
 	.driver		= {
 		.owner	= THIS_MODULE,
@@ -1015,6 +1026,7 @@ static struct platform_driver s3c2410_i2c_driver = {
 static struct platform_driver s3c2440_i2c_driver = {
 	.probe		= s3c24xx_i2c_probe,
 	.remove		= s3c24xx_i2c_remove,
+	.suspend_late	= s3c24xx_i2c_suspend_late,
 	.resume		= s3c24xx_i2c_resume,
 	.driver		= {
 		.owner	= THIS_MODULE,

drivers/staging/Kconfig

@@ -22,6 +22,8 @@ menuconfig STAGING
 	  If in doubt, say N here.
 
 
+if STAGING
+
 config STAGING_EXCLUDE_BUILD
 	bool "Exclude Staging drivers from being built" if STAGING
 	default y
@@ -62,3 +64,4 @@ source "drivers/staging/at76_usb/Kconfig"
 source "drivers/staging/poch/Kconfig"
 
 endif # !STAGING_EXCLUDE_BUILD
+endif # STAGING

drivers/usb/class/usbtmc.c

@@ -51,6 +51,7 @@ static struct usb_device_id usbtmc_devices[] = {
 	{ USB_INTERFACE_INFO(USB_CLASS_APP_SPEC, 3, 0), },
 	{ 0, } /* terminating entry */
 };
+MODULE_DEVICE_TABLE(usb, usbtmc_devices);
 
 /*
  * This structure is the capabilities for the device

drivers/usb/core/driver.c

@@ -279,7 +279,9 @@ static int usb_unbind_interface(struct device *dev)
 	 * altsetting means creating new endpoint device entries).
 	 * When either of these happens, defer the Set-Interface.
 	 */
-	if (!error && intf->dev.power.status == DPM_ON)
+	if (intf->cur_altsetting->desc.bAlternateSetting == 0)
+		;	/* Already in altsetting 0 so skip Set-Interface */
+	else if (!error && intf->dev.power.status == DPM_ON)
 		usb_set_interface(udev, intf->altsetting[0].
 				desc.bInterfaceNumber, 0);
 	else

drivers/usb/gadget/f_rndis.c

@@ -651,6 +651,8 @@ rndis_bind(struct usb_configuration *c, struct usb_function *f)
 				fs_in_desc.bEndpointAddress;
 		hs_out_desc.bEndpointAddress =
 				fs_out_desc.bEndpointAddress;
+		hs_notify_desc.bEndpointAddress =
+				fs_notify_desc.bEndpointAddress;
 
 		/* copy descriptors, and track endpoint copies */
 		f->hs_descriptors = usb_copy_descriptors(eth_hs_function);
@@ -662,6 +664,8 @@ rndis_bind(struct usb_configuration *c, struct usb_function *f)
 				f->hs_descriptors, &hs_in_desc);
 		rndis->hs.out = usb_find_endpoint(eth_hs_function,
 				f->hs_descriptors, &hs_out_desc);
+		rndis->hs.notify = usb_find_endpoint(eth_hs_function,
+				f->hs_descriptors, &hs_notify_desc);
 	}
 
 	rndis->port.open = rndis_open;

drivers/usb/serial/ftdi_sio.c

@@ -143,6 +143,7 @@ static struct ftdi_sio_quirk ftdi_HE_TIRA1_quirk = {
 static struct usb_device_id id_table_combined [] = {
 	{ USB_DEVICE(FTDI_VID, FTDI_AMC232_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_CANUSB_PID) },
+	{ USB_DEVICE(FTDI_VID, FTDI_CANDAPTER_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_SCS_DEVICE_0_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_SCS_DEVICE_1_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_SCS_DEVICE_2_PID) },
@@ -166,6 +167,7 @@ static struct usb_device_id id_table_combined [] = {
 	{ USB_DEVICE(FTDI_VID, FTDI_OPENDCC_PID) },
 	{ USB_DEVICE(INTERBIOMETRICS_VID, INTERBIOMETRICS_IOBOARD_PID) },
 	{ USB_DEVICE(INTERBIOMETRICS_VID, INTERBIOMETRICS_MINI_IOBOARD_PID) },
+	{ USB_DEVICE(FTDI_VID, FTDI_SPROG_II) },
 	{ USB_DEVICE(FTDI_VID, FTDI_XF_632_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_XF_634_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_XF_547_PID) },

drivers/usb/serial/ftdi_sio.h

@@ -40,6 +40,9 @@
 /* AlphaMicro Components AMC-232USB01 device */
 #define FTDI_AMC232_PID 0xFF00 /* Product Id */
 
+/* www.candapter.com Ewert Energy Systems CANdapter device */
+#define FTDI_CANDAPTER_PID 0x9F80 /* Product Id */
+
 /* SCS HF Radio Modems PID's (http://www.scs-ptc.com) */
 /* the VID is the standard ftdi vid (FTDI_VID) */
 #define FTDI_SCS_DEVICE_0_PID 0xD010    /* SCS PTC-IIusb */
@@ -75,6 +78,9 @@
 /* OpenDCC (www.opendcc.de) product id */
 #define FTDI_OPENDCC_PID	0xBFD8
 
+/* Sprog II (Andrew Crosland's SprogII DCC interface) */
+#define FTDI_SPROG_II		0xF0C8
+
 /* www.crystalfontz.com devices - thanx for providing free devices for evaluation ! */
 /* they use the ftdi chipset for the USB interface and the vendor id is the same */
 #define FTDI_XF_632_PID 0xFC08	/* 632: 16x2 Character Display */

drivers/usb/serial/pl2303.c

@@ -91,6 +91,8 @@ static struct usb_device_id id_table [] = {
 	{ USB_DEVICE(WS002IN_VENDOR_ID, WS002IN_PRODUCT_ID) },
 	{ USB_DEVICE(COREGA_VENDOR_ID, COREGA_PRODUCT_ID) },
 	{ USB_DEVICE(YCCABLE_VENDOR_ID, YCCABLE_PRODUCT_ID) },
+	{ USB_DEVICE(SUPERIAL_VENDOR_ID, SUPERIAL_PRODUCT_ID) },
+	{ USB_DEVICE(HP_VENDOR_ID, HP_LD220_PRODUCT_ID) },
 	{ }					/* Terminating entry */
 };
 

drivers/usb/serial/pl2303.h

@@ -110,3 +110,11 @@
 /* Y.C. Cable U.S.A., Inc - USB to RS-232 */
 #define YCCABLE_VENDOR_ID	0x05ad
 #define YCCABLE_PRODUCT_ID	0x0fba
+
+/* "Superial" USB - Serial */
+#define SUPERIAL_VENDOR_ID	0x5372
+#define SUPERIAL_PRODUCT_ID	0x2303
+
+/* Hewlett-Packard LD220-HP POS Pole Display */
+#define HP_VENDOR_ID		0x03f0
+#define HP_LD220_PRODUCT_ID	0x3524

drivers/usb/serial/ti_usb_3410_5052.c

@@ -16,56 +16,6 @@
  * For questions or problems with this driver, contact Texas Instruments
  * technical support, or Al Borchers <alborchers@steinerpoint.com>, or
  * Peter Berger <pberger@brimson.com>.
- *
- * This driver needs this hotplug script in /etc/hotplug/usb/ti_usb_3410_5052
- * or in /etc/hotplug.d/usb/ti_usb_3410_5052.hotplug to set the device
- * configuration.
- *
- * #!/bin/bash
- *
- * BOOT_CONFIG=1
- * ACTIVE_CONFIG=2
- *
- * if [[ "$ACTION" != "add" ]]
- * then
- * 	exit
- * fi
- *
- * CONFIG_PATH=/sys${DEVPATH%/?*}/bConfigurationValue
- *
- * if [[ 0`cat $CONFIG_PATH` -ne $BOOT_CONFIG ]]
- * then
- * 	exit
- * fi
- *
- * PRODUCT=${PRODUCT%/?*}		# delete version
- * VENDOR_ID=`printf "%d" 0x${PRODUCT%/?*}`
- * PRODUCT_ID=`printf "%d" 0x${PRODUCT#*?/}`
- *
- * PARAM_PATH=/sys/module/ti_usb_3410_5052/parameters
- *
- * function scan() {
- * 	s=$1
- * 	shift
- * 	for i
- * 	do
- * 		if [[ $s -eq $i ]]
- * 		then
- * 			return 0
- * 		fi
- * 	done
- * 	return 1
- * }
- *
- * IFS=$IFS,
- *
- * if (scan $VENDOR_ID 1105 `cat $PARAM_PATH/vendor_3410` &&
- * scan $PRODUCT_ID 13328 `cat $PARAM_PATH/product_3410`) ||
- * (scan $VENDOR_ID 1105 `cat $PARAM_PATH/vendor_5052` &&
- * scan $PRODUCT_ID 20562 20818 20570 20575 `cat $PARAM_PATH/product_5052`)
- * then
- * 	echo $ACTIVE_CONFIG > $CONFIG_PATH
- * fi
  */
 
 #include <linux/kernel.h>
@@ -457,9 +407,10 @@ static int ti_startup(struct usb_serial *serial)
 		goto free_tdev;
 	}
 
-	/* the second configuration must be set (in sysfs by hotplug script) */
+	/* the second configuration must be set */
 	if (dev->actconfig->desc.bConfigurationValue == TI_BOOT_CONFIG) {
-		status = -ENODEV;
+		status = usb_driver_set_configuration(dev, TI_ACTIVE_CONFIG);
+		status = status ? status : -ENODEV;
 		goto free_tdev;
 	}
 

drivers/usb/storage/unusual_devs.h

@@ -167,8 +167,22 @@ UNUSUAL_DEV(  0x0421, 0x005d, 0x0001, 0x0600,
 		US_SC_DEVICE, US_PR_DEVICE, NULL,
 		US_FL_FIX_CAPACITY ),
 
+/* Reported by Ozan Sener <themgzzy@gmail.com> */
+UNUSUAL_DEV(  0x0421, 0x0060, 0x0551, 0x0551,
+		"Nokia",
+		"3500c",
+		US_SC_DEVICE, US_PR_DEVICE, NULL,
+		US_FL_FIX_CAPACITY ),
+
+/* Reported by CSECSY Laszlo <boobaa@frugalware.org> */
+UNUSUAL_DEV(  0x0421, 0x0063, 0x0001, 0x0601,
+		"Nokia",
+		"Nokia 3109c",
+		US_SC_DEVICE, US_PR_DEVICE, NULL,
+		US_FL_FIX_CAPACITY ),
+
 /* Patch for Nokia 5310 capacity */
-UNUSUAL_DEV(  0x0421, 0x006a, 0x0000, 0x0591,
+UNUSUAL_DEV(  0x0421, 0x006a, 0x0000, 0x0701,
 		"Nokia",
 		"5310",
 		US_SC_DEVICE, US_PR_DEVICE, NULL,

fs/cifs/cifssmb.c

@@ -3983,7 +3983,8 @@ parse_DFS_referrals(TRANSACTION2_GET_DFS_REFER_RSP *pSMBr,
 
 		node->flags = le16_to_cpu(pSMBr->DFSFlags);
 		if (is_unicode) {
-			__le16 *tmp = kmalloc(strlen(searchName)*2, GFP_KERNEL);
+			__le16 *tmp = kmalloc(strlen(searchName)*2 + 2,
+						GFP_KERNEL);
 			cifsConvertToUCS((__le16 *) tmp, searchName,
 					PATH_MAX, nls_codepage, remap);
 			node->path_consumed = hostlen_fromUCS(tmp,

fs/ocfs2/ocfs2_fs.h

@@ -86,7 +86,8 @@
 #define OCFS2_CLEAR_INCOMPAT_FEATURE(sb,mask)			\
 	OCFS2_SB(sb)->s_feature_incompat &= ~(mask)
 
-#define OCFS2_FEATURE_COMPAT_SUPP	OCFS2_FEATURE_COMPAT_BACKUP_SB
+#define OCFS2_FEATURE_COMPAT_SUPP	(OCFS2_FEATURE_COMPAT_BACKUP_SB	\
+					 | OCFS2_FEATURE_COMPAT_JBD2_SB)
 #define OCFS2_FEATURE_INCOMPAT_SUPP	(OCFS2_FEATURE_INCOMPAT_LOCAL_MOUNT \
 					 | OCFS2_FEATURE_INCOMPAT_SPARSE_ALLOC \
 					 | OCFS2_FEATURE_INCOMPAT_INLINE_DATA \
@@ -152,6 +153,11 @@
  */
 #define OCFS2_FEATURE_COMPAT_BACKUP_SB		0x0001
 
+/*
+ * The filesystem will correctly handle journal feature bits.
+ */
+#define OCFS2_FEATURE_COMPAT_JBD2_SB		0x0002
+
 /*
  * Unwritten extents support.
  */

fs/ocfs2/xattr.c

@@ -2645,9 +2645,9 @@ static int ocfs2_xattr_update_xattr_search(struct inode *inode,
 				return ret;
 			}
 
-			i = xs->here - old_xh->xh_entries;
-			xs->here = &xs->header->xh_entries[i];
 		}
+		i = xs->here - old_xh->xh_entries;
+		xs->here = &xs->header->xh_entries[i];
 	}
 
 	return ret;

include/linux/usb/ch9.h

@@ -158,8 +158,12 @@ struct usb_ctrlrequest {
  * (rarely) accepted by SET_DESCRIPTOR.
  *
  * Note that all multi-byte values here are encoded in little endian
- * byte order "on the wire".  But when exposed through Linux-USB APIs,
- * they've been converted to cpu byte order.
+ * byte order "on the wire".  Within the kernel and when exposed
+ * through the Linux-USB APIs, they are not converted to cpu byte
+ * order; it is the responsibility of the client code to do this.
+ * The single exception is when device and configuration descriptors (but
+ * not other descriptors) are read from usbfs (i.e. /proc/bus/usb/BBB/DDD);
+ * in this case the fields are converted to host endianness by the kernel.
  */
 
 /*

lib/dynamic_printk.c

@@ -135,7 +135,7 @@ int unregister_dynamic_debug_module(char *mod_name)
 	nr_entries--;
 out:
 	up(&debug_list_mutex);
-	return 0;
+	return ret;
 }
 EXPORT_SYMBOL_GPL(unregister_dynamic_debug_module);
 
@@ -289,7 +289,7 @@ static ssize_t pr_debug_write(struct file *file, const char __user *buf,
 					dynamic_enabled = DYNAMIC_ENABLED_SOME;
 					err = 0;
 					printk(KERN_DEBUG
-					       "debugging enabled for module %s",
+					       "debugging enabled for module %s\n",
 					       elem->name);
 				} else if (!value && (elem->enable == 1)) {
 					elem->enable = 0;
@@ -309,7 +309,7 @@ static ssize_t pr_debug_write(struct file *file, const char __user *buf,
 					err = 0;
 					printk(KERN_DEBUG
 					       "debugging disabled for module "
-					       "%s", elem->name);
+					       "%s\n", elem->name);
 				}
 			}
 		}