Merge tag 'ux500-core-for-arm-soc-2' of...

Merge tag 'ux500-core-for-arm-soc-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-stericsson into late/all

From Linus Walleij:
Ux500 core changes for ARM SoC:
- Cleanup from Julia Lawall
- Clean out old pin definitions
- Fix the I2C devices

* tag 'ux500-core-for-arm-soc-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-stericsson:
  ARM: ux500: fix up the I2C devices
  ARM: ux500: delete oldschool pin defines
  arch/arm/mach-ux500/cpu-db8500.c: Avoid using ARRAY_AND_SIZE(e) as a function argument
  ARM: ux500: set coherent_dma_mask for dma40
  ARM: ux500: remove u8500_secondary_startup from INIT section.
  ARM: ux500: add restart support via prcmu
Signed-off-by: NOlof Johansson <olof@lixom.net>

arch/arm/mach-ux500/board-mop500-audio.c

@@ -17,7 +17,6 @@
 #include "ste-dma40-db8500.h"
 #include "board-mop500.h"
 #include "devices-db8500.h"
-#include "pins-db8500.h"
 
 static struct stedma40_chan_cfg msp0_dma_rx = {
 	.high_priority = true,

arch/arm/mach-ux500/board-mop500-pins.c

@@ -14,7 +14,6 @@
 
 #include <asm/mach-types.h>
 
-#include "pins-db8500.h"
 #include "board-mop500.h"
 
 enum custom_pin_cfg_t {

arch/arm/mach-ux500/board-mop500.c

@@ -42,7 +42,6 @@
 #include <linux/platform_data/dma-ste-dma40.h>
 
 #include <asm/mach-types.h>
-#include <asm/mach/arch.h>
 
 #include "setup.h"
 #include "devices.h"
@@ -325,21 +324,19 @@ static struct lp55xx_platform_data __initdata lp5521_sec_data = {
        .clock_mode     = LP55XX_CLOCK_EXT,
 };
 
+/* I2C0 devices only available on the first HREF/MOP500 */
 static struct i2c_board_info __initdata mop500_i2c0_devices[] = {
 	{
 		I2C_BOARD_INFO("tc3589x", 0x42),
 		.irq		= NOMADIK_GPIO_TO_IRQ(217),
 		.platform_data  = &mop500_tc35892_data,
 	},
-	/* I2C0 devices only available prior to HREFv60 */
 	{
 		I2C_BOARD_INFO("tps61052", 0x33),
 		.platform_data  = &mop500_tps61052_data,
 	},
 };
 
-#define NUM_PRE_V60_I2C0_DEVICES 1
-
 static struct i2c_board_info __initdata mop500_i2c2_devices[] = {
 	{
 		/* lp5521 LED driver, 1st device */
@@ -357,6 +354,17 @@ static struct i2c_board_info __initdata mop500_i2c2_devices[] = {
 	},
 };
 
+static int __init mop500_i2c_board_init(void)
+{
+	if (machine_is_u8500())
+		mop500_uib_i2c_add(0, mop500_i2c0_devices,
+				   ARRAY_SIZE(mop500_i2c0_devices));
+	mop500_uib_i2c_add(2, mop500_i2c2_devices,
+			   ARRAY_SIZE(mop500_i2c2_devices));
+	return 0;
+}
+device_initcall(mop500_i2c_board_init);
+
 static void __init mop500_i2c_init(struct device *parent)
 {
 	db8500_add_i2c0(parent, NULL);
@@ -565,7 +573,6 @@ static struct platform_device *snowball_platform_devs[] __initdata = {
 static void __init mop500_init_machine(void)
 {
 	struct device *parent = NULL;
-	int i2c0_devs;
 	int i;
 
 	platform_device_register(&db8500_prcmu_device);
@@ -588,19 +595,13 @@ static void __init mop500_init_machine(void)
 	mop500_spi_init(parent);
 	mop500_audio_init(parent);
 	mop500_uart_init(parent);
-
 	u8500_cryp1_hash1_init(parent);
 
-	i2c0_devs = ARRAY_SIZE(mop500_i2c0_devices);
-
-	i2c_register_board_info(0, mop500_i2c0_devices, i2c0_devs);
-	i2c_register_board_info(2, mop500_i2c2_devices,
-				ARRAY_SIZE(mop500_i2c2_devices));
-
 	/* This board has full regulator constraints */
 	regulator_has_full_constraints();
 }
 
+
 static void __init snowball_init_machine(void)
 {
 	struct device *parent = NULL;
@@ -635,7 +636,6 @@ static void __init snowball_init_machine(void)
 static void __init hrefv60_init_machine(void)
 {
 	struct device *parent = NULL;
-	int i2c0_devs;
 	int i;
 
 	platform_device_register(&db8500_prcmu_device);
@@ -664,14 +664,6 @@ static void __init hrefv60_init_machine(void)
 	mop500_audio_init(parent);
 	mop500_uart_init(parent);
 
-	i2c0_devs = ARRAY_SIZE(mop500_i2c0_devices);
-
-	i2c0_devs -= NUM_PRE_V60_I2C0_DEVICES;
-
-	i2c_register_board_info(0, mop500_i2c0_devices, i2c0_devs);
-	i2c_register_board_info(2, mop500_i2c2_devices,
-				ARRAY_SIZE(mop500_i2c2_devices));
-
 	/* This board has full regulator constraints */
 	regulator_has_full_constraints();
 }
@@ -686,6 +678,7 @@ MACHINE_START(U8500, "ST-Ericsson MOP500 platform")
 	.init_time	= ux500_timer_init,
 	.init_machine	= mop500_init_machine,
 	.init_late	= ux500_init_late,
+	.restart        = ux500_restart,
 MACHINE_END
 
 MACHINE_START(U8520, "ST-Ericsson U8520 Platform HREFP520")
@@ -695,6 +688,7 @@ MACHINE_START(U8520, "ST-Ericsson U8520 Platform HREFP520")
 	.init_time	= ux500_timer_init,
 	.init_machine	= mop500_init_machine,
 	.init_late	= ux500_init_late,
+	.restart        = ux500_restart,
 MACHINE_END
 
 MACHINE_START(HREFV60, "ST-Ericsson U8500 Platform HREFv60+")
@@ -705,6 +699,7 @@ MACHINE_START(HREFV60, "ST-Ericsson U8500 Platform HREFv60+")
 	.init_time	= ux500_timer_init,
 	.init_machine	= hrefv60_init_machine,
 	.init_late	= ux500_init_late,
+	.restart        = ux500_restart,
 MACHINE_END
 
 MACHINE_START(SNOWBALL, "Calao Systems Snowball platform")
@@ -716,4 +711,5 @@ MACHINE_START(SNOWBALL, "Calao Systems Snowball platform")
 	.init_time	= ux500_timer_init,
 	.init_machine	= snowball_init_machine,
 	.init_late	= NULL,
+	.restart        = ux500_restart,
 MACHINE_END

arch/arm/mach-ux500/cpu-db8500.c

@@ -26,7 +26,6 @@
 
 #include <asm/pmu.h>
 #include <asm/mach/map.h>
-#include <asm/mach/arch.h>
 
 #include "setup.h"
 #include "devices.h"
@@ -157,7 +156,8 @@ static void __init db8500_add_gpios(struct device *parent)
 		.supports_sleepmode = true,
 	};
 
-	dbx500_add_gpios(parent, ARRAY_AND_SIZE(db8500_gpio_base),
+	dbx500_add_gpios(parent, db8500_gpio_base,
+			 ARRAY_SIZE(db8500_gpio_base),
 			 IRQ_DB8500_GPIO0, &pdata);
 	dbx500_add_pinctrl(parent, "pinctrl-db8500", U8500_PRCMU_BASE);
 }
@@ -325,6 +325,7 @@ DT_MACHINE_START(U8500_DT, "ST-Ericsson Ux5x0 platform (Device Tree Support)")
 	.init_machine	= u8500_init_machine,
 	.init_late	= NULL,
 	.dt_compat      = stericsson_dt_platform_compat,
+	.restart        = ux500_restart,
 MACHINE_END
 
 #endif

arch/arm/mach-ux500/cpu.c

@@ -31,6 +31,14 @@
 #include "db8500-regs.h"
 #include "id.h"
 
+void ux500_restart(enum reboot_mode mode, const char *cmd)
+{
+	local_irq_disable();
+	local_fiq_disable();
+
+	prcmu_system_reset(0);
+}
+
 /*
  * FIXME: Should we set up the GPIO domain here?
  *

arch/arm/mach-ux500/devices-db8500.c

@@ -49,6 +49,7 @@ struct stedma40_platform_data dma40_plat_data = {
 struct platform_device u8500_dma40_device = {
 	.dev = {
 		.platform_data = &dma40_plat_data,
+		.coherent_dma_mask = DMA_BIT_MASK(32),
 	},
 	.name = "dma40",
 	.id = 0,

arch/arm/mach-ux500/headsmp.S

@@ -11,8 +11,6 @@
 #include <linux/linkage.h>
 #include <linux/init.h>
 
-	__INIT
-
 /*
  * U8500 specific entry point for secondary CPUs.
  */

arch/arm/mach-ux500/setup.h

@@ -11,10 +11,13 @@
 #ifndef __ASM_ARCH_SETUP_H
 #define __ASM_ARCH_SETUP_H
 
+#include <asm/mach/arch.h>
 #include <asm/mach/time.h>
 #include <linux/init.h>
 #include <linux/mfd/abx500/ab8500.h>
 
+void ux500_restart(enum reboot_mode mode, const char *cmd);
+
 void __init ux500_map_io(void);
 extern void __init u8500_map_io(void);