提交 b8fb4907 编写于 作者: P Peter Ujfalusi 提交者: Liam Girdwood

ASoC: omap-mcbsp: Simplify DMA configuration

Configure the DMA request line, port address, and stream name at
probe time instead of every time we start a stream.
These settings are static in the system.
Signed-off-by: NPeter Ujfalusi <peter.ujfalusi@ti.com>
Tested-by: NGrazvydas Ignotas <notasas@gmail.com>
Tested-by: NJanusz Krzysztofik <jkrzyszt@tis.icnet.pl>
Acked-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: NJarkko Nikula <jarkko.nikula@bitmer.com>
Signed-off-by: NLiam Girdwood <lrg@ti.com>
上级 256d9c25
......@@ -175,22 +175,6 @@ void omap_mcbsp_config(struct omap_mcbsp *mcbsp,
}
}
/**
* omap_mcbsp_dma_params - returns the dma channel number
* @id - mcbsp id
* @stream - indicates the direction of data flow (rx or tx)
*
* Returns the dma channel number for the rx channel or tx channel
* based on the value of @stream for the requested mcbsp given by @id
*/
int omap_mcbsp_dma_ch_params(struct omap_mcbsp *mcbsp, unsigned int stream)
{
if (stream)
return mcbsp->dma_rx_sync;
else
return mcbsp->dma_tx_sync;
}
/**
* omap_mcbsp_dma_reg_params - returns the address of mcbsp data register
* @id - mcbsp id
......@@ -200,7 +184,8 @@ int omap_mcbsp_dma_ch_params(struct omap_mcbsp *mcbsp, unsigned int stream)
* to be used by DMA for transferring/receiving data based on the value of
* @stream for the requested mcbsp given by @id
*/
int omap_mcbsp_dma_reg_params(struct omap_mcbsp *mcbsp, unsigned int stream)
static int omap_mcbsp_dma_reg_params(struct omap_mcbsp *mcbsp,
unsigned int stream)
{
int data_reg;
......@@ -983,14 +968,20 @@ int __devinit omap_mcbsp_init(struct platform_device *pdev)
dev_err(&pdev->dev, "invalid rx DMA channel\n");
return -ENODEV;
}
mcbsp->dma_rx_sync = res->start;
/* RX DMA request number, and port address configuration */
mcbsp->dma_data[1].name = "Audio Capture";
mcbsp->dma_data[1].dma_req = res->start;
mcbsp->dma_data[1].port_addr = omap_mcbsp_dma_reg_params(mcbsp, 1);
res = platform_get_resource_byname(pdev, IORESOURCE_DMA, "tx");
if (!res) {
dev_err(&pdev->dev, "invalid tx DMA channel\n");
return -ENODEV;
}
mcbsp->dma_tx_sync = res->start;
/* TX DMA request number, and port address configuration */
mcbsp->dma_data[0].name = "Audio Playback";
mcbsp->dma_data[0].dma_req = res->start;
mcbsp->dma_data[0].port_addr = omap_mcbsp_dma_reg_params(mcbsp, 0);
mcbsp->fclk = clk_get(&pdev->dev, "fck");
if (IS_ERR(mcbsp->fclk)) {
......
......@@ -288,10 +288,6 @@ struct omap_mcbsp {
int rx_irq;
int tx_irq;
/* DMA stuff */
u8 dma_rx_sync;
u8 dma_tx_sync;
/* Protect the field .free, while checking if the mcbsp is in use */
struct omap_mcbsp_platform_data *pdata;
struct omap_mcbsp_st_data *st_data;
......@@ -328,9 +324,6 @@ int omap2_mcbsp_set_clks_src(struct omap_mcbsp *mcbsp, u8 fck_src_id);
void omap2_mcbsp1_mux_clkr_src(struct omap_mcbsp *mcbsp, u8 mux);
void omap2_mcbsp1_mux_fsr_src(struct omap_mcbsp *mcbsp, u8 mux);
int omap_mcbsp_dma_ch_params(struct omap_mcbsp *mcbsp, unsigned int stream);
int omap_mcbsp_dma_reg_params(struct omap_mcbsp *mcbsp, unsigned int stream);
/* Sidetone specific API */
int omap_st_set_chgain(struct omap_mcbsp *mcbsp, int channel, s16 chgain);
int omap_st_get_chgain(struct omap_mcbsp *mcbsp, int channel, s16 *chgain);
......
......@@ -225,17 +225,12 @@ static int omap_mcbsp_dai_hw_params(struct snd_pcm_substream *substream,
struct omap_mcbsp *mcbsp = snd_soc_dai_get_drvdata(cpu_dai);
struct omap_mcbsp_reg_cfg *regs = &mcbsp->cfg_regs;
struct omap_pcm_dma_data *dma_data;
int dma;
int wlen, channels, wpf, sync_mode = OMAP_DMA_SYNC_ELEMENT;
int pkt_size = 0;
unsigned long port;
unsigned int format, div, framesize, master;
dma_data = &mcbsp->dma_data[substream->stream];
dma = omap_mcbsp_dma_ch_params(mcbsp, substream->stream);
port = omap_mcbsp_dma_reg_params(mcbsp, substream->stream);
switch (params_format(params)) {
case SNDRV_PCM_FORMAT_S16_LE:
dma_data->data_type = OMAP_DMA_DATA_TYPE_S16;
......@@ -291,9 +286,6 @@ static int omap_mcbsp_dai_hw_params(struct snd_pcm_substream *substream,
}
}
dma_data->name = substream->stream ? "Audio Capture" : "Audio Playback";
dma_data->dma_req = dma;
dma_data->port_addr = port;
dma_data->sync_mode = sync_mode;
dma_data->packet_size = pkt_size;
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册