V4L/DVB (3934): Support new dvb-ttusb-budget boards with stv0297

Added config switch to stv0297 to control i2c STOP during write behaviour.
Update frontend init in dvb-ttusb-budget.
Enable i2c STOP on other users of stv0297.

Signed-off-by: Thomas Kaiser <linux-dvb AT kaiser-linux.li>
Signed-off-by: NAndrew de Quincey <adq_dvb@lidskialf.net>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

drivers/media/dvb/frontends/stv0297.c

@@ -68,19 +68,25 @@ static int stv0297_readreg(struct stv0297_state *state, u8 reg)
 	int ret;
 	u8 b0[] = { reg };
 	u8 b1[] = { 0 };
-	struct i2c_msg msg[] = { {.addr = state->config->demod_address,.flags = 0,.buf = b0,.len =
-				  1},
-	{.addr = state->config->demod_address,.flags = I2C_M_RD,.buf = b1,.len = 1}
-	};
+	struct i2c_msg msg[] = { {.addr = state->config->demod_address,.flags = 0,.buf = b0,.len = 1},
+				 {.addr = state->config->demod_address,.flags = I2C_M_RD,.buf = b1,.len = 1}
+			       };
 
 	// this device needs a STOP between the register and data
-	if ((ret = i2c_transfer(state->i2c, &msg[0], 1)) != 1) {
-		dprintk("%s: readreg error (reg == 0x%02x, ret == %i)\n", __FUNCTION__, reg, ret);
-		return -1;
-	}
-	if ((ret = i2c_transfer(state->i2c, &msg[1], 1)) != 1) {
-		dprintk("%s: readreg error (reg == 0x%02x, ret == %i)\n", __FUNCTION__, reg, ret);
-		return -1;
+	if (state->config->stop_during_read) {
+		if ((ret = i2c_transfer(state->i2c, &msg[0], 1)) != 1) {
+			dprintk("%s: readreg error (reg == 0x%02x, ret == %i)\n", __FUNCTION__, reg, ret);
+			return -1;
+		}
+		if ((ret = i2c_transfer(state->i2c, &msg[1], 1)) != 1) {
+			dprintk("%s: readreg error (reg == 0x%02x, ret == %i)\n", __FUNCTION__, reg, ret);
+			return -1;
+		}
+	} else {
+		if ((ret = i2c_transfer(state->i2c, msg, 2)) != 2) {
+			dprintk("%s: readreg error (reg == 0x%02x, ret == %i)\n", __FUNCTION__, reg, ret);
+			return -1;
+		}
 	}
 
 	return b1[0];
@@ -107,13 +113,20 @@ static int stv0297_readregs(struct stv0297_state *state, u8 reg1, u8 * b, u8 len
 	};
 
 	// this device needs a STOP between the register and data
-	if ((ret = i2c_transfer(state->i2c, &msg[0], 1)) != 1) {
-		dprintk("%s: readreg error (reg == 0x%02x, ret == %i)\n", __FUNCTION__, reg1, ret);
-		return -1;
-	}
-	if ((ret = i2c_transfer(state->i2c, &msg[1], 1)) != 1) {
-		dprintk("%s: readreg error (reg == 0x%02x, ret == %i)\n", __FUNCTION__, reg1, ret);
-		return -1;
+	if (state->config->stop_during_read) {
+		if ((ret = i2c_transfer(state->i2c, &msg[0], 1)) != 1) {
+			dprintk("%s: readreg error (reg == 0x%02x, ret == %i)\n", __FUNCTION__, reg1, ret);
+			return -1;
+		}
+		if ((ret = i2c_transfer(state->i2c, &msg[1], 1)) != 1) {
+			dprintk("%s: readreg error (reg == 0x%02x, ret == %i)\n", __FUNCTION__, reg1, ret);
+			return -1;
+		}
+	} else {
+		if ((ret = i2c_transfer(state->i2c, msg, 2)) != 2) {
+			dprintk("%s: readreg error (reg == 0x%02x, ret == %i)\n", __FUNCTION__, reg1, ret);
+			return -1;
+		}
 	}
 
 	return 0;

drivers/media/dvb/frontends/stv0297.h

@@ -37,6 +37,9 @@ struct stv0297_config
 
 	/* does the "inversion" need inverted? */
 	u8 invert:1;
+
+	/* set to 1 if the device requires an i2c STOP during reading */
+	u8 stop_during_read:1;
 };
 
 extern struct dvb_frontend* stv0297_attach(const struct stv0297_config* config,

drivers/media/dvb/ttpci/av7110.c

@@ -1859,6 +1859,7 @@ static struct stv0297_config nexusca_stv0297_config = {
 	.demod_address = 0x1C,
 	.inittab = nexusca_stv0297_inittab,
 	.invert = 1,
+	.stop_during_read = 1,
 };
 
 

drivers/media/dvb/ttpci/budget-ci.c

@@ -977,6 +977,7 @@ static struct stv0297_config dvbc_philips_tdm1316l_config = {
 	.demod_address = 0x1c,
 	.inittab = dvbc_philips_tdm1316l_inittab,
 	.invert = 0,
+	.stop_during_read = 1,
 };
 
 

drivers/media/dvb/ttusb-budget/Kconfig

@@ -6,6 +6,7 @@ config DVB_TTUSB_BUDGET
 	select DVB_VES1820
 	select DVB_TDA8083
 	select DVB_STV0299
+	select DVB_STV0297
 	select DVB_LNBP21
 	help
 	  Support for external USB adapters designed by Technotrend and

drivers/media/dvb/ttusb-budget/dvb-ttusb-budget.c

@@ -30,6 +30,7 @@
 #include "tda1004x.h"
 #include "stv0299.h"
 #include "tda8083.h"
+#include "stv0297.h"
 #include "lnbp21.h"
 
 #include <linux/dvb/frontend.h>
@@ -1380,6 +1381,174 @@ static u8 read_pwm(struct ttusb* ttusb)
 }
 
 
+static int dvbc_philips_tdm1316l_tuner_set_params(struct dvb_frontend *fe, struct dvb_frontend_parameters *params)
+{
+	struct ttusb *ttusb = (struct ttusb *) fe->dvb->priv;
+	u8 tuner_buf[5];
+	struct i2c_msg tuner_msg = {.addr = 0x60,
+				    .flags = 0,
+				    .buf = tuner_buf,
+				    .len = sizeof(tuner_buf) };
+	int tuner_frequency = 0;
+	u8 band, cp, filter;
+
+	// determine charge pump
+	tuner_frequency = params->frequency;
+	if      (tuner_frequency <  87000000) {return -EINVAL;}
+	else if (tuner_frequency < 130000000) {cp = 3; band = 1;}
+	else if (tuner_frequency < 160000000) {cp = 5; band = 1;}
+	else if (tuner_frequency < 200000000) {cp = 6; band = 1;}
+	else if (tuner_frequency < 290000000) {cp = 3; band = 2;}
+	else if (tuner_frequency < 420000000) {cp = 5; band = 2;}
+	else if (tuner_frequency < 480000000) {cp = 6; band = 2;}
+	else if (tuner_frequency < 620000000) {cp = 3; band = 4;}
+	else if (tuner_frequency < 830000000) {cp = 5; band = 4;}
+	else if (tuner_frequency < 895000000) {cp = 7; band = 4;}
+	else {return -EINVAL;}
+
+	// assume PLL filter should always be 8MHz for the moment.
+	filter = 1;
+
+	// calculate divisor
+	// (Finput + Fif)/Fref; Fif = 36125000 Hz, Fref = 62500 Hz
+	tuner_frequency = ((params->frequency + 36125000) / 62500);
+
+	// setup tuner buffer
+	tuner_buf[0] = tuner_frequency >> 8;
+	tuner_buf[1] = tuner_frequency & 0xff;
+	tuner_buf[2] = 0xc8;
+	tuner_buf[3] = (cp << 5) | (filter << 3) | band;
+	tuner_buf[4] = 0x80;
+
+	if (fe->ops->i2c_gate_ctrl)
+		fe->ops->i2c_gate_ctrl(fe, 1);
+	if (i2c_transfer(&ttusb->i2c_adap, &tuner_msg, 1) != 1) {
+		printk("dvb-ttusb-budget: dvbc_philips_tdm1316l_pll_set Error 1\n");
+		return -EIO;
+	}
+
+	msleep(50);
+
+	if (fe->ops->i2c_gate_ctrl)
+		fe->ops->i2c_gate_ctrl(fe, 1);
+	if (i2c_transfer(&ttusb->i2c_adap, &tuner_msg, 1) != 1) {
+		printk("dvb-ttusb-budget: dvbc_philips_tdm1316l_pll_set Error 2\n");
+		return -EIO;
+	}
+
+	msleep(1);
+
+	return 0;
+}
+
+static u8 dvbc_philips_tdm1316l_inittab[] = {
+	0x80, 0x21,
+	0x80, 0x20,
+	0x81, 0x01,
+	0x81, 0x00,
+	0x00, 0x09,
+	0x01, 0x69,
+	0x03, 0x00,
+	0x04, 0x00,
+	0x07, 0x00,
+	0x08, 0x00,
+	0x20, 0x00,
+	0x21, 0x40,
+	0x22, 0x00,
+	0x23, 0x00,
+	0x24, 0x40,
+	0x25, 0x88,
+	0x30, 0xff,
+	0x31, 0x00,
+	0x32, 0xff,
+	0x33, 0x00,
+	0x34, 0x50,
+	0x35, 0x7f,
+	0x36, 0x00,
+	0x37, 0x20,
+	0x38, 0x00,
+	0x40, 0x1c,
+	0x41, 0xff,
+	0x42, 0x29,
+	0x43, 0x20,
+	0x44, 0xff,
+	0x45, 0x00,
+	0x46, 0x00,
+	0x49, 0x04,
+	0x4a, 0xff,
+	0x4b, 0x7f,
+	0x52, 0x30,
+	0x55, 0xae,
+	0x56, 0x47,
+	0x57, 0xe1,
+	0x58, 0x3a,
+	0x5a, 0x1e,
+	0x5b, 0x34,
+	0x60, 0x00,
+	0x63, 0x00,
+	0x64, 0x00,
+	0x65, 0x00,
+	0x66, 0x00,
+	0x67, 0x00,
+	0x68, 0x00,
+	0x69, 0x00,
+	0x6a, 0x02,
+	0x6b, 0x00,
+	0x70, 0xff,
+	0x71, 0x00,
+	0x72, 0x00,
+	0x73, 0x00,
+	0x74, 0x0c,
+	0x80, 0x00,
+	0x81, 0x00,
+	0x82, 0x00,
+	0x83, 0x00,
+	0x84, 0x04,
+	0x85, 0x80,
+	0x86, 0x24,
+	0x87, 0x78,
+	0x88, 0x00,
+	0x89, 0x00,
+	0x90, 0x01,
+	0x91, 0x01,
+	0xa0, 0x00,
+	0xa1, 0x00,
+	0xa2, 0x00,
+	0xb0, 0x91,
+	0xb1, 0x0b,
+	0xc0, 0x4b,
+	0xc1, 0x00,
+	0xc2, 0x00,
+	0xd0, 0x00,
+	0xd1, 0x00,
+	0xd2, 0x00,
+	0xd3, 0x00,
+	0xd4, 0x00,
+	0xd5, 0x00,
+	0xde, 0x00,
+	0xdf, 0x00,
+	0x61, 0x38,
+	0x62, 0x0a,
+	0x53, 0x13,
+	0x59, 0x08,
+	0x55, 0x00,
+	0x56, 0x40,
+	0x57, 0x08,
+	0x58, 0x3d,
+	0x88, 0x10,
+	0xa0, 0x00,
+	0xa0, 0x00,
+	0xa0, 0x00,
+	0xa0, 0x04,
+	0xff, 0xff,
+};
+
+static struct stv0297_config dvbc_philips_tdm1316l_config = {
+	.demod_address = 0x1c,
+	.inittab = dvbc_philips_tdm1316l_inittab,
+	.invert = 0,
+};
+
 static void frontend_init(struct ttusb* ttusb)
 {
 	switch(le16_to_cpu(ttusb->dev->descriptor.idProduct)) {
@@ -1413,6 +1582,12 @@ static void frontend_init(struct ttusb* ttusb)
 			ttusb->fe->ops->tuner_ops.set_params = alps_tdbe2_tuner_set_params;
 			break;
 		}
+
+		ttusb->fe = stv0297_attach(&dvbc_philips_tdm1316l_config, &ttusb->i2c_adap);
+		if (ttusb->fe != NULL) {
+			ttusb->fe->ops->tuner_ops.set_params = dvbc_philips_tdm1316l_tuner_set_params;
+			break;
+		}
 		break;
 
 	case 0x1005: // Hauppauge/TT Nova-USB-t budget (tda10046/Philips td1316(tda6651tt) OR cx22700/ALPS TDMB7(??))