提交 b8b88b70 编写于 作者: D Daniel Drake 提交者: Mark Brown

ASoC: add es8316 codec driver

Add a codec driver for the Everest ES8316, based on code provided by
David Yang from Everest Semi.

I limited the functionality to items where the vendor code was clear,
and things that can be tested on the Weibu F3C (Intel Cherry Trail).
As a result the initial implementation only supports running in slave
mode at single speed (up to 48kHz sample rate) using I2S. HPD is not
supported.
Signed-off-by: NDavid Yang <yangxiaohua@everest-semi.com>
[drake@endlessm.com: significant cleanups and simplifications,
                     remove dead/unclear code]
Signed-off-by: NDaniel Drake <drake@endlessm.com>
Signed-off-by: NMark Brown <broonie@kernel.org>
上级 2ea659a9
......@@ -72,6 +72,7 @@ config SND_SOC_ALL_CODECS
select SND_SOC_DA9055 if I2C
select SND_SOC_DIO2125
select SND_SOC_DMIC
select SND_SOC_ES8316 if I2C
select SND_SOC_ES8328_SPI if SPI_MASTER
select SND_SOC_ES8328_I2C if I2C
select SND_SOC_ES7134
......@@ -543,6 +544,9 @@ config SND_SOC_HDMI_CODEC
config SND_SOC_ES7134
tristate "Everest Semi ES7134 CODEC"
config SND_SOC_ES8316
tristate "Everest Semi ES8316 CODEC"
config SND_SOC_ES8328
tristate
......
......@@ -65,6 +65,7 @@ snd-soc-da732x-objs := da732x.o
snd-soc-da9055-objs := da9055.o
snd-soc-dmic-objs := dmic.o
snd-soc-es7134-objs := es7134.o
snd-soc-es8316-objs := es8316.o
snd-soc-es8328-objs := es8328.o
snd-soc-es8328-i2c-objs := es8328-i2c.o
snd-soc-es8328-spi-objs := es8328-spi.o
......@@ -300,6 +301,7 @@ obj-$(CONFIG_SND_SOC_DA732X) += snd-soc-da732x.o
obj-$(CONFIG_SND_SOC_DA9055) += snd-soc-da9055.o
obj-$(CONFIG_SND_SOC_DMIC) += snd-soc-dmic.o
obj-$(CONFIG_SND_SOC_ES7134) += snd-soc-es7134.o
obj-$(CONFIG_SND_SOC_ES8316) += snd-soc-es8316.o
obj-$(CONFIG_SND_SOC_ES8328) += snd-soc-es8328.o
obj-$(CONFIG_SND_SOC_ES8328_I2C)+= snd-soc-es8328-i2c.o
obj-$(CONFIG_SND_SOC_ES8328_SPI)+= snd-soc-es8328-spi.o
......
此差异已折叠。
/*
* Copyright Everest Semiconductor Co.,Ltd
*
* Author: David Yang <yangxiaohua@everest-semi.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
*/
#ifndef _ES8316_H
#define _ES8316_H
/*
* ES8316 register space
*/
/* Reset Control */
#define ES8316_RESET 0x00
/* Clock Management */
#define ES8316_CLKMGR_CLKSW 0x01
#define ES8316_CLKMGR_CLKSEL 0x02
#define ES8316_CLKMGR_ADCOSR 0x03
#define ES8316_CLKMGR_ADCDIV1 0x04
#define ES8316_CLKMGR_ADCDIV2 0x05
#define ES8316_CLKMGR_DACDIV1 0x06
#define ES8316_CLKMGR_DACDIV2 0x07
#define ES8316_CLKMGR_CPDIV 0x08
/* Serial Data Port Control */
#define ES8316_SERDATA1 0x09
#define ES8316_SERDATA_ADC 0x0a
#define ES8316_SERDATA_DAC 0x0b
/* System Control */
#define ES8316_SYS_VMIDSEL 0x0c
#define ES8316_SYS_PDN 0x0d
#define ES8316_SYS_LP1 0x0e
#define ES8316_SYS_LP2 0x0f
#define ES8316_SYS_VMIDLOW 0x10
#define ES8316_SYS_VSEL 0x11
#define ES8316_SYS_REF 0x12
/* Headphone Mixer */
#define ES8316_HPMIX_SEL 0x13
#define ES8316_HPMIX_SWITCH 0x14
#define ES8316_HPMIX_PDN 0x15
#define ES8316_HPMIX_VOL 0x16
/* Charge Pump Headphone driver */
#define ES8316_CPHP_OUTEN 0x17
#define ES8316_CPHP_ICAL_VOL 0x18
#define ES8316_CPHP_PDN1 0x19
#define ES8316_CPHP_PDN2 0x1a
#define ES8316_CPHP_LDOCTL 0x1b
/* Calibration */
#define ES8316_CAL_TYPE 0x1c
#define ES8316_CAL_SET 0x1d
#define ES8316_CAL_HPLIV 0x1e
#define ES8316_CAL_HPRIV 0x1f
#define ES8316_CAL_HPLMV 0x20
#define ES8316_CAL_HPRMV 0x21
/* ADC Control */
#define ES8316_ADC_PDN_LINSEL 0x22
#define ES8316_ADC_PGAGAIN 0x23
#define ES8316_ADC_D2SEPGA 0x24
#define ES8316_ADC_DMIC 0x25
#define ES8316_ADC_MUTE 0x26
#define ES8316_ADC_VOLUME 0x27
#define ES8316_ADC_ALC1 0x29
#define ES8316_ADC_ALC2 0x2a
#define ES8316_ADC_ALC3 0x2b
#define ES8316_ADC_ALC4 0x2c
#define ES8316_ADC_ALC5 0x2d
#define ES8316_ADC_ALC_NG 0x2e
/* DAC Control */
#define ES8316_DAC_PDN 0x2f
#define ES8316_DAC_SET1 0x30
#define ES8316_DAC_SET2 0x31
#define ES8316_DAC_SET3 0x32
#define ES8316_DAC_VOLL 0x33
#define ES8316_DAC_VOLR 0x34
/* GPIO */
#define ES8316_GPIO_SEL 0x4d
#define ES8316_GPIO_DEBOUNCE 0x4e
#define ES8316_GPIO_FLAG 0x4f
/* Test mode */
#define ES8316_TESTMODE 0x50
#define ES8316_TEST1 0x51
#define ES8316_TEST2 0x52
#define ES8316_TEST3 0x53
/*
* Field definitions
*/
/* ES8316_RESET */
#define ES8316_RESET_CSM_ON 0x80
/* ES8316_CLKMGR_CLKSW */
#define ES8316_CLKMGR_CLKSW_MCLK_ON 0x40
#define ES8316_CLKMGR_CLKSW_BCLK_ON 0x20
/* ES8316_SERDATA1 */
#define ES8316_SERDATA1_MASTER 0x80
#define ES8316_SERDATA1_BCLK_INV 0x20
/* ES8316_SERDATA_ADC and _DAC */
#define ES8316_SERDATA2_FMT_MASK 0x3
#define ES8316_SERDATA2_FMT_I2S 0x00
#define ES8316_SERDATA2_FMT_LEFTJ 0x01
#define ES8316_SERDATA2_FMT_RIGHTJ 0x02
#define ES8316_SERDATA2_FMT_PCM 0x03
#define ES8316_SERDATA2_ADCLRP 0x20
#define ES8316_SERDATA2_LEN_MASK 0x1c
#define ES8316_SERDATA2_LEN_24 0x00
#define ES8316_SERDATA2_LEN_20 0x04
#define ES8316_SERDATA2_LEN_18 0x08
#define ES8316_SERDATA2_LEN_16 0x0c
#define ES8316_SERDATA2_LEN_32 0x10
#endif
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册