提交 b82cee24 编写于 作者: T Thomas Abraham 提交者: Kukjin Kim

gpio/samsung: Fix incorrect gpio pull up/down callback for EXYNOS4

Some of the gpio chips of exynos4 are assigned a default gpio config without
the exynos4 specific pull up/down callbacks which resulted in incorrect
setting of pull up/down configuration.

Fix this by adding two new exynos4 specific entries in the array of default
configs with set_pull and get_pull callbacks set to exynos4 specific callbacks
The new default gpio configs can then be used for exynos4 gpio chips.
Signed-off-by: NThomas Abraham <thomas.abraham@linaro.org>
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
上级 6700397a
......@@ -482,7 +482,14 @@ static struct samsung_gpio_cfg samsung_gpio_cfgs[] = {
}, {
.set_config = samsung_gpio_setcfg_2bit,
.get_config = samsung_gpio_getcfg_2bit,
},
}, {
.set_pull = exynos4_gpio_setpull,
.get_pull = exynos4_gpio_getpull,
}, {
.cfg_eint = 0x3,
.set_pull = exynos4_gpio_setpull,
.get_pull = exynos4_gpio_getpull,
}
};
/*
......@@ -2253,49 +2260,49 @@ static struct samsung_gpio_chip exynos4_gpios_2[] = {
.label = "GPL2",
},
}, {
.config = &samsung_gpio_cfgs[0],
.config = &samsung_gpio_cfgs[8],
.chip = {
.base = EXYNOS4_GPY0(0),
.ngpio = EXYNOS4_GPIO_Y0_NR,
.label = "GPY0",
},
}, {
.config = &samsung_gpio_cfgs[0],
.config = &samsung_gpio_cfgs[8],
.chip = {
.base = EXYNOS4_GPY1(0),
.ngpio = EXYNOS4_GPIO_Y1_NR,
.label = "GPY1",
},
}, {
.config = &samsung_gpio_cfgs[0],
.config = &samsung_gpio_cfgs[8],
.chip = {
.base = EXYNOS4_GPY2(0),
.ngpio = EXYNOS4_GPIO_Y2_NR,
.label = "GPY2",
},
}, {
.config = &samsung_gpio_cfgs[0],
.config = &samsung_gpio_cfgs[8],
.chip = {
.base = EXYNOS4_GPY3(0),
.ngpio = EXYNOS4_GPIO_Y3_NR,
.label = "GPY3",
},
}, {
.config = &samsung_gpio_cfgs[0],
.config = &samsung_gpio_cfgs[8],
.chip = {
.base = EXYNOS4_GPY4(0),
.ngpio = EXYNOS4_GPIO_Y4_NR,
.label = "GPY4",
},
}, {
.config = &samsung_gpio_cfgs[0],
.config = &samsung_gpio_cfgs[8],
.chip = {
.base = EXYNOS4_GPY5(0),
.ngpio = EXYNOS4_GPIO_Y5_NR,
.label = "GPY5",
},
}, {
.config = &samsung_gpio_cfgs[0],
.config = &samsung_gpio_cfgs[8],
.chip = {
.base = EXYNOS4_GPY6(0),
.ngpio = EXYNOS4_GPIO_Y6_NR,
......@@ -2303,7 +2310,7 @@ static struct samsung_gpio_chip exynos4_gpios_2[] = {
},
}, {
.base = (S5P_VA_GPIO2 + 0xC00),
.config = &samsung_gpio_cfgs[3],
.config = &samsung_gpio_cfgs[9],
.irq_base = IRQ_EINT(0),
.chip = {
.base = EXYNOS4_GPX0(0),
......@@ -2313,7 +2320,7 @@ static struct samsung_gpio_chip exynos4_gpios_2[] = {
},
}, {
.base = (S5P_VA_GPIO2 + 0xC20),
.config = &samsung_gpio_cfgs[3],
.config = &samsung_gpio_cfgs[9],
.irq_base = IRQ_EINT(8),
.chip = {
.base = EXYNOS4_GPX1(0),
......@@ -2323,7 +2330,7 @@ static struct samsung_gpio_chip exynos4_gpios_2[] = {
},
}, {
.base = (S5P_VA_GPIO2 + 0xC40),
.config = &samsung_gpio_cfgs[3],
.config = &samsung_gpio_cfgs[9],
.irq_base = IRQ_EINT(16),
.chip = {
.base = EXYNOS4_GPX2(0),
......@@ -2333,7 +2340,7 @@ static struct samsung_gpio_chip exynos4_gpios_2[] = {
},
}, {
.base = (S5P_VA_GPIO2 + 0xC60),
.config = &samsung_gpio_cfgs[3],
.config = &samsung_gpio_cfgs[9],
.irq_base = IRQ_EINT(24),
.chip = {
.base = EXYNOS4_GPX3(0),
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册